How can I amke a full cold backup

Hi, I would like to make a full cold backup in command line mode and then recover it.How caI proceed?
Backup sets or image copy?
I have tried this but it didn't work, I made it after a normal dbstart.
connected to target database: ISCREAM (DBID=3415054131)
RMAN> backup incremental level 0
2> as compressed backupset database;
Starting backup at 26.04.06
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=145 devtype=DISK
channel ORA_DISK_1: starting compressed incremental level 0 datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00002 name=/home/oracle/oradata/iscream/undotbs01.dbf
input datafile fno=00001 name=/home/oracle/oradata/iscream/system01.dbf
input datafile fno=00003 name=/home/oracle/oradata/iscream/sysaux01.dbf
input datafile fno=00005 name=/home/oracle/oradata/iscream/example01.dbf
input datafile fno=00004 name=/home/oracle/oradata/iscream/users01.dbf
input datafile fno=00006 name=/home/oracle/oradata/iscream/tools.dbf
channel ORA_DISK_1: starting piece 1 at 26.04.06
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 04/26/2006 10:22:33
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 52428800 bytes disk space from 5242880000 limit

You did fill up flash recovery area :
$ oerr ora 19809
19809, 00000, "limit exceeded for recovery files"
//*Cause: The limit for recovery files specified by the
//        DB_RECOVERY_FILE_DEST_SIZE was exceeded.
//*Action:The error is accompanied by 19804. See message 19804 for further
//        details.
$ oerr ora 19804
19804, 00000, "cannot reclaim %s bytes disk space from %s limit"
// *Cause: Oracle cannot reclaim disk space of specified bytes from the
//         DB_RECOVERY_FILE_DEST_SIZE limit.
// *Action: There are five possible solutions:
//          1) Take frequent backup of recovery area using RMAN.
//          2) Consider changing RMAN retention policy.
//          3) Consider changing RMAN archivelog deletion policy.
//          4) Add disk space and increase DB_RECOVERY_FILE_DEST_SIZE.
//          5) Delete files from recovery area using RMAN.
$

Similar Messages

How can I do a Full backup of my phone to rooting it?

I'm on my way to root my phone (xperia pro mk16a with the 587 update), but I want to know how can I get a full backup of the phone in case I need it.
Thanks!
Solved!
Go to Solution.

Unfortunately no option
What you can backup is contacts, sms, call logs, Games data ( etc )
If you follow the process of rooting correcty, you won't loose anything
{GUIDE} How to Root Xperia™ Smartphones
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

Plz provide me some documents on how to clone a database using cold backup

Dear All,
Please provide me some documents on how to clone a database using cold backup which is in archive log.
Also, please can you provide me the document to install Oracle 9.2.0.6 on Aix 5L
Thanks,
Mahipal

Please provide me some documents on how to clone a database using cold >backup which is in archive loghttp://www.oracle-base.com/articles/9i/DuplicateDatabaseUsingRMAN9i.php
please can you provide me the document to install Oracle 9.2.0.6 on Aix 5L
Oracle9i Installation Guide
Release 2 (9.2.0.1.0) for UNIX Systems: AIX-Based Systems, Compaq Tru64 UNIX, HP 9000 Series HP-UX, Linux Intel, and Sun Solaris -
http://download.oracle.com/docs/html/A96167_01/toc.htm

How can I view my full billing history for the app and music stores without iTunes installed?

I just received an email receipt from Paypal showing a $12.99 purchase from iTunes. I almost NEVER purchase anything over around five dollars in the app or music store. Since PayPal does not show what this purchase was for, I have not received the receipt from Apple yet, and I cannot find anyway to look up online what this purchase was for....I need help to find out ASAP what this purchase was. If my account has been compromised or if I have been incorrectly charged for something, I would like to get the issue handled immediately. I do not want to install iTunes on my PC (nor should I have to for Pete's sake), but I cannot see anything recent at all in my app or music history on my iPad (not that I would ever purchase anything for $12.99 anyway...I just don't). Thanks in advance for any tips!

How can I view my full billing history for the app and music stores without iTunes installed?
No.
If my account has been compromised
If you even think this may have happened, immediately change your password.
See this -> Apple ID: Changing your password

How can I copy a time machine backup from one Time Capsule to another ?

How can I copy a time machine backup from one Time Capsule to another ? I bought a 1 Tb Time Capsule to replace my 512Mb Time Capsule. Now, I like to copy my time machine backup from the old Time Capsule to the new one so I can keep using my backup.

from this support article:
(click on image to enlarge)

HT203756 How can I remove 'old' or 'incomplete' backups from iCloud?

How can I remove 'old' or 'incomplete' backups from iCloud?
When I attempted, the iPhone 6+ message asked if I wanted to remove ALL of the backups... without giving me the option of selecting the specific one I wanted to remove.
I had performed 'backups' of my old iPhone, but, when I tried to RESTORE to the REPLACEMENT iPhone, at least one of the iCloud backups shows 'incomplete'. There was no 'error' on the original iPhone...when it 'failed' to complete the backup.
Now, I would like to 'clear up' the 'storage' on the iCloud, but am unable to select specific ones. I can either keep all instances or shut off iCloud Backup which would, according to the message, remove/delete ALL of the BACKUPS.
This shouldn't be this difficult.....

I too wondered how you remove apps from iCloud. Judging by the quantity of questions, comments, suggestions and replies (some rather rude) there is a clear need for Apple to make their literature a lot clearer. The page describing what iCloud backs up refers to "app data" as an item which is backed up. To the uniniated this might mean the app program but it seems not. The app is "bought" via iTunes or the App Store and details of your purchase (free or otherwise) is held there separately on the server.
It would be nice however to be able to remove the reference to junk I have downloaded and decided I don't want so that it doesn't appear on the purchased apps listing! Apple please note this.
It must be remembered that Apple products come pitifully supported by manuals "out of the box" on the assumption that it is so easy to use the product that no explanation is needed. They forget that most buyers of Apple products (me included) don't know (and don't want to know) how they work, so when something is not obvious they are required to plough through Lord knows how many web pages of "knowledge base" material until they find an answer.
All I can add is that it is worth spending time reading the multiitude of discussion threads before asking the question yet again...

How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?

How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?
Several times in the last year, I've gotten a message that Time Machine needs to completely redo my backup. Using the wireless connection, this takes almost two days. Is there a way to do the backup with ethernet and then switch back to wireless? Thanks.

May I know what is needed to make sure the MacBook is able to see Time Capsule on ethernet?
Connect an Ethernet cable from one of the LAN <-> ports on the 2Wire gateway to the WAN port (circle of dots icon) on the Time Capsule.
If AirPort Utility cannot "see" the Time Capsule now, you will need to perform a "hard reset" by holding in the reset button for 7-8 seconds or so and then reconfigure the Time Capsule. You can use the same Time Capsule name and password, etc. as before.
Configure the Time Capsule to "Create a wireless network" and select the Bridge Mode option when it appears during the setup using AirPort Utility.
Once the Time Capsule is configured, restart the entire network again. Power down everything, start the 2Wire first and then start each other device after that one at a time about a minute apart.
Now you can connect your Mac directly to one of the LAN <-> ports on the Time Capsule for the backup using another Ethernet cable. In general, about 20-25 GB per hour will transfer.
The Time Capsule will broadcast a much faster wireless network than the 2Wire can provide, so you might want to leave the setup "as is" for awhile after the first backup is complete. If you decide to use the Time Capsule as your main wireless access point, you would want to turn the wireless off on the 2Wire since two wireless networks in close proximity can create interference problems.
Or, if you want to use the wireless on the 2Wire, you could turn off the wireless on the Time Capsule. Then backups will occur over the 2Wire wireless, or over Ethernet.
I don't really recommend the "Join a wireless network" setting on the Time Capsule for most users, but you could go back to that setup as well if you want after the first backup is complete.

How can I create a full-screen view of Keynote slide in Snow Leopard?

How can I create a full-screen view of my Keynote slides in Snow Leopard?
I'm going to be importing into ScreenFlow to create a video.
Thank you!!

Welcome to Apple Support Communities.
Do you want static screen captures or motion video of slides as titles, bullet points, and the like are presented?
Run the Keynote slide presentation in full-screen mode, then...
Static full-screen captures - use Command+Shift+3.
Static partial-screen captures - use Command+Shift+4 and use cursor to select the area of the screen to capture.
If you want motion video as builds occur, why not use Keynote's built-in Share, Export function?
(I'm on iLife '09.)
Also understand that the default slide format for Keynote is 1024x768, not full-screen MacBook 1280x800 screen size, so you'll have wide black borders unless you change the default size or crop the finished screen captures.
Message was edited by: kostby

How can I print a full frame photo from iPhoto 11? Even though I click on scale to fit paper size, it crops both ends of the photo in landscape set up. I have an Epson R1800 with the latest drivers.

How can I print a full frame photo from iPhoto 11? Even though I click on scale to fit paper size, it crops both ends of the photo in landscape set up. I have an Epson R1800 with the latest drivers. (I'm also 3 days new to iMac and iPhoto 11 from an eMac and iPhoto 6.)

" Hello Jeff. Here at Oki Data, we do not support programming. I would recommend contacting Adobe for further assistance. You can also browse their website at http://www.adobe.com/products/postscript/.

How can we generate the report of backup,tablesapcefrom OEM / RMAN

How can we generate the report of backup status,tablesapce(usedf,free space) for all the databases from OEM / RMAN
1.)we need generate the report of tablespace used,free, archive...
2.)How can we generate the Backup status report also

user13584223 wrote:
How can we generate the report of backup status,tablesapce(usedf,free space) for all the databases from OEM / RMAN
1.)we need generate the report of tablespace used,free, archive...There are DBA_* views that expose the necessary information. They are documented in the Reference Manual.
2.)How can we generate the Backup status report alsoThere are rman commands that give that. They are documented in the Backup and Recovery User's Guide.
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to [url tahiti.oracle.com]tahiti.oracle.com.
Locate the link for your Oracle product and version, and click on it.
You are now at the entire documentation set for your selected Oracle product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab (for 10.x) or the "Master Book List" link (for 11.x) you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

How can i get a full url of video uploaded in asset library on sharepoint 2013

Hi All,
I have videos in SharePoint 2013 Asset Library, now i want display that videos in my SharePoint webpage as a webpart.
Now, how can i get a full url of video uploaded in asset library?
Thanks in Advance!

The Asset library does a pretty good job of hiding the full URL. An "asset" item is actually a folder. The folder contains the video and support files like preview thumbnails.
So, if you upload a video named butterfly.wmv to http://yourSite/sites/demo/Assets the path to the video would be http://yourSite/sites/demo/Assets/butterfly/butterfly.wmv. If the user changed the name while uploading the file to "Pretty bugs"
the URL would then be http://yourSite/sites/demo/Assets/Pretty%20Bugs/butterfly.wmv.
Probably the best way to explore these hidden folders and discover the "real" URL is to use SharePoint Designer 2013.
Launch SharePoint Designer and open your site.
In the Navigation area click "All Files". (If you don't see All Files then your administrators may have partially locked down SPD.)
In the list of files and folders click the Assets library.
Find and click your video (you will see the "Name" as entered in the file's properties, not the file name.)
Find the video file, right-click it and click Properties.
Copy the Location.
If you just want to display the video in the page:
Edit the page
Click INSERT
Click Web Part
From the Media and Content category select Media Web Part and click Add.
Edit the web part (click the web part's dropdown)
From the MEDIA ribbon click Change Media
Click From SharePoint and navigate to your assets library and pick a video
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner

How can I create a full width composition

Hi All
I'm loving the new update and as usual this leads onto other things.
How can I create a full width (scalable) composition without a work around?
The new full width icon only seems to work with slideshows.
Thanks
Paul

Did anyone ever figure this out or get an answer? I like how it works on this site:
LIVESTRONG.org
Click on the words and links in the pictures but it is full width. The full width option isn't available on a composition.

How can I avoid a full scan when ...

Hello
How can I avoid a full scan with I apply the aggregate function "MIN"
SQL> select min(c1) from hh;
   MIN(C1)
         1
Execution Plan
   0      SELECT STATEMENT Optimizer=CHOOSE
   1    0   SORT (AGGREGATE)
   2    1     TABLE ACCESS (FULL) OF 'HH'Regards
James King

The table 'hh' does not have statistics. Assuming that there is an index on the column c1, statistics are computed on the table and its indexes, you may see a
INDEX (FULL SCAN (MIN/MAX)) of the index on column 'c1'.

How can I create a full wave rectified signal tia sal22

How can I create a full wave rectified signal. I figured out how to create a half wave signal using upper limits and lower limits just having trouble with the next part.
tia sal22
Message Edited by sal22 on 08-06-2009 05:49 PM
Solved!
Go to Solution.
Attachments:
half rectified.png ‏15 KB
Rectified_waves.png ‏87 KB

Do you really need to put "tia sal22" in the subject line of everyone of your messages?
To do a full rectified sine wave, just put an absolute value function on your waveform wire.
Message Edited by Ravens Fan on 08-07-2009 12:10 AM

How can I create a full page on Adobe Muse (without side space)?

How can I create a full page with Adobe Muse (without side space)?

Muse uses Fixed width Layouts so that is not 100% possible. You can extend images and box elements to full width but not actual content.

How can I amke a full cold backup

Similar Messages

Maybe you are looking for