How can I animate size and rotation on mouse over?

Hello,
I'm fairly new to Edge Animate and have been trying to find tutorials but all I've found so far are ones for older versions which are very different to the new CC 2014 versions so not had much luck..
I'd like to animate icons similar to the those on the coloured band on this site: http://do.live147.com/html/rockox/index.html ("Website", Latest Trends" etc..)
So on mouse over I'd like to animate the scale and rotation of the icon, and then if possible, to keep it in that new state until another icon is selected (rather than returning on mouse out). All icons are for a design in Muse (CC 2014).
Can anyone help me or point me towards some new tutorials which covers this? I'd appreciate any clues on how to do this!
I'm using Edge Animate CC 2014.1 on a Mac.
Thanks in advance!
Anne-Marie

Ooh okay - thanks Heathrowe - I see what you mean about using the symbols to group animations, does seem much simpler!
So, putting the question back out there...
I've managed to implement the mouse rollover states;
mouseenter: sym.getSymbol("Concept").play('Over');
mouseleave: sym.getSymbol("Concept").playReverse();
When each one is clicked, it holds;
click: sym.getSymbol("Concept").play('Click');
Now I need to figure out the code to make each symbol continue to hold after it's been clicked on (even if the mouse rolls over them again), and playReverse ONLY when another symbol is clicked. My plan is to have information appear under this banner which changes depending on which tab is selected.
Here's my project if it helps to see... http://we.tl/u8r6sZNvdA
Any help would be hugely appreciated!!
Thanks

Similar Messages

How can i stop Pages and Numbers JUMPING ALL OVER THE SCREEN. MAKING ME SEASICK! PLEASE HELP

how can i stop Pages and Numbers screen JUMPING ALL OVER the place when i just touch my mouse. i have tried and tried to change the mouse settings - but it is the software. especially Numbers. you can't even see what the page size is until you print. i am so SEASICK! PLEASE HELP.

Thanks for the trouble to reply. this problem only happens with Pages and Numbers for me. i have done all the tricks like restarting. the main problem is that the working space is not 'stable' - it has no 'ends' even on full screen. in Numbers - UNLESS I SET IT TO 25% VIEW (which is way too small) - the actual total 'work space' is way off the grid - so every time i move the mouse the table i am working on zooms off to left or right, at the slightest touch. i have set my mouse to no gestures!
the thing is this did not happen before the latest upgrades.
but thanks anyway. SG.
if you are a techy person - i have another prob. in Mail i am unable to set the SORT / VIEW messages to BY DATE.
(it used to be ok, at one time, too). now it continually reverts to BY SUBJECT oh so annoying !
restarting etc does not change it. resetting preferences does not change it.
maybe i need a new Mac ?
mine is a 27-inch, Mid 2011. running latest.

How to Resize JButton,JTextArea and JTextFields on Mouse Over....

Hi All...
Hi friends.. I want to be implement my java swing application Resize the Width and Height wise of JButton,JLabel,JTextFields on mouse over etc.
============================
Arjun Palanichamy.
Senior Programmer.
Chennai-India.

Hi All...
I am herewith enclosed my sample code for resize the JButton(),But This one resize the when will be extend the Button Caption letters,But i want mouse click resize the without button caption or with caption.
sample code :
package Resize;
import java.awt.Container;
import java.awt.FlowLayout;
import javax.swing.JButton;
import javax.swing.JFrame;
import java.awt.Dimension;
import java.awt.ComponentOrientation;
public class ReButton{
public static boolean RIGHT_TO_LEFT = false;
public static void addComponents(Container contentPane) {
if (RIGHT_TO_LEFT) {
contentPane.setComponentOrientation(
ComponentOrientation.RIGHT_TO_LEFT);
contentPane.setLayout(new FlowLayout());
contentPane.add(new JButton("1"));
contentPane.add(new JButton("100"));
contentPane.add(new JButton("100 100"));
contentPane.add(new JButton("100 100 100"));
contentPane.add(new JButton("100 100 100 100"));
contentPane.add(new JButton("5"));
private static void createAndShowGUI() {
JFrame frame = new JFrame("FlowLayoutDemo") {
public Dimension getMinimumSize() {
Dimension prefSize = getPreferredSize();
return new Dimension(100, prefSize.height);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
//Set up the content pane.
addComponents(frame.getContentPane());
//Display the window.
frame.pack();
frame.setVisible(true);
public static void main(String[] args) {
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
for example can you Click this.....
http://www.eclipse.org/vep/WebContent/docs/testcases/null-layout/null-layout.htm
Thanks for your time.
Arjun Palanichamy.
Chennai-India.

How can I set PCTUSED and PCTFREE in Warehouse databases?

Hi,
There are many Schemas in our database and some are used for OLTP and some others are used for Warehouse. Also our tablespaces are Local Managed.
Could you help me please how can I set PCTUSED and PCTFREE for Warehouses and OLTP.
What are your suggestions? What should be optimum?
DB version is 9.2.0.8.
thanks & regards

If you are using locally managed tablespaces with ASSM then the pctused parameter would no longer apply. In all cases dictionary vs locally managed with or without ASSM you should set pctfree based on how much of the data row column values are present at initial row insertion and how likely any column is upated to a larger size after initial row insertion.
In a warehouse I would expect most of the tables to have 100% of the row data present at initial insert and for the data to never be updated. For tables meeting this requirement a pctfree of 3 - 5% would likely be a good choice. I never like to use 0% since the day may come when you add another column to the table.
With OLTP tables the ideal pctfree value varies more from table to table. Most table so seem to work well enought with the default 10% but I have seen tables that need 50% pctfree to prevent row migration since only the key column values existed at initial insert and most all the other column data was added later.
Where ASSM is not in use I like to set pctused to 95 - pctfree. Over the last 15 years I am not sure I ever found a need to change the pctused from this once set. I have set a lot of tables up over the years from the old default of 40% to use 60% and 80% before resetting everything during a server platform migration as I mentioned above.
HTH -- Mark D Powell --

The photos in Facebook posts are suddenly huge. How can I reduce size in Facebook? When I double click photo it opens in regular size.

The photos in Facebook posts are suddenly huge. How can I reduce size in Facebook? When I double click photo it opens in regular size. All is well on my PC. This just started happening last night....Zoom is not on.

Access FB through your browser and send a message to Facebook and ask them to fix their app.

How can I uninstall yosemite and reinstall Loin with out losing all my in formation and programs

How can I uninstall Yosemite and reinstall Loin with out losing all my in formation and programsThis had been the worst os system apple has come out, too many errors
too many to list.
a few
Losing all mail. and watching them disappear in front of my eyes and could nothing about it
also when accessing cloud the screen just rolls in when accessing mail, like loading and loading and loading for 1 to 2 minuets.
I did not up grade my Mac Book Pro, and is working fine,
Just my iMac, its act kile avid card and it only happens access iCloud mail.
so I want to and need to go back to Loin

You can't unless you have a current backup of your old Lion system because the first thing you must do is erase the drive. It 's possible to use Target Disk Mode between your iMac and the MBP in order to clone the MBP to the iMac. However, that will still erase everything on the iMac's drive.
Or you could see about getting Yosemite to work correctly. If you have IMAP mail, then your mail should be intact.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Download and install the 10.10.1 update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Download and install the 10.10.1 update.
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

How can i animate .jpg image?

hi
how can i animate images which i edit in GIMP?
i mean, i have 1 video clip showing a tree. and then i have 1 .jpg image of an airplane
how can i make that airplane from jpg image to appear in the video showing the tree? i want to make that airplane crash into the tree and explode.
i see a lot of similar stuff on youtube (like "cyriak animation mix") but i don't know what this technique is called. animation of still images? google search gave me lots of dubious results, none of them came straight to the point.
all i know it involves some manipulation of keyframes but i need to know more keywords to further research this technique. or better yet - find a decent article explaining basics.
can somebody help?

First, you will probably want to Key out the background around the plane. Look into Chorma Key, or one of the other Keying Effects in PrE, depending on how the plane was shot, or created. If you created it, you can probably Mask out any background, and Save_As a format, that support Transparency, such as with an Alpha Channel Mask.
Then, with the plane on a higher Video Track, than your tree, use the Fixed Effect>Motion>Position to Keyframe the Position of the plane, moving it across the Frame. Steve Grisetti has a great Learning Series on Basic Keyframing and Advanced Keyframing, available at Muvipix.com: http://www.muvipix.com/products.php?searchphrase=Basic+Keyframing&btn.x=-1091&btn.y=-78
Good luck,
Hunt

How can i increase size of applet

when i run my form in windows my applet don't visible full .how can change the size of applet.what property i have to set.i forget that property.

are you using an application server or the local OC4J container?
In both cases the height and width of your applet can be set in the formsweb.cfg file.
you can find this file under <oracle_home>/forms/server directory
search in the file for with and height
you can put a fixed size in pixels or in percentage of your screen resolution
hope it helps
Erwin

How can I use OmniPortlet and Web Clipping Portlet?

How can I use OmniPortlet and Web Clipping Portlet?

You find information on OmniPortlet and Web Clipping in the Portal Developer's Guide.
o Building Portlets with OmniPortlet
o Building Content-Based Portlets with Web Clipping
Peter

How can i stream video and audio from macbook air to my tv?

how can i stream video and audio from macbook air to my tv?

Wirelessly: you need an AirPlay - enabled device such as an AppleTV.
Wired: if your TV has an HDMI port, you need a Thunderbolt to HDMI adapter such as this one:
Mini DisplayPort to HDMI® Adapter w/ Audio Support
If your TV does not have an HDMI port you will need a converter that will convert HDMI input to whatever input your TV requires.

HT1212 I am trying to restore a phone that the screen does not work on, therefore I can't input my password. How can I bypass this and upload it to itunes?

I am trying to restore a phone that the screen does not work on, therefore I can't input my password. How can I bypass this and upload it to itunes?

You could follow the instructions in the support document that you linked from. There is a section regarding the passcode and the inability to use it or enter it. However, you may encounter more issues since you cannot use the screen.

How can I use excel and word on the IPAD2

How can I use excel and word documents on my Ipad 2

There are apps such as Documents To Go which support reading/editting/creating those sorts of documents :
standard version - http://itunes.apple.com/us/app/documents-to-go-office-suite/id317117961?mt=8
premium version - http://itunes.apple.com/us/app/documents-to-go-premium-office/id317107309?mt=8

HT201272 Hello there,I delete my scruff application on the 8/05/13. Receipt N: 184052577343. And I was charged ammount of £ 16.99on the 15/05/13. I t's a Subscription Renewal. How can I stop it and get the refund of this ammount back on my account? Thank

Hello there,I delete my scruff application on the 8/05/13. Receipt N: 184052577343. And I was charged ammount of £ 16.99on the 15/05/13. I t's a Subscription Renewal. How can I stop it and get the refund of this ammount back on my account? Thank you!!

There are instructions on this page for managing and stopping auto-renewing subscriptions (deleting an app won't stop it) : http://support.apple.com/kb/HT4098
In terms of a refund, what does it say on the app's description page in the store (a lot say that refunds aren't given) ? But you can try contacting iTunes Support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I have a windows computer. How can I create apps and put them on itunes?

I have a windows computer. How can I create apps and put them on itunes?

You can't. The iOS SDK requires Mac OS X and an Intel Mac; Windows applications can't be put on either the iOS or Mac OS X App Stores.
(82889)

HOW can I FIX Mavericks and Safari 7.0 to allow Gmail to work? Gmail has been FUBAR'd since downloading Mavericks today. Finally found the brute-force logout site to just getr logged out; can't keep doing that. Other features no longer work, either.

Made big mistake of downloading Mavericks today.
Been struggling with all the FUBARd messes it caused, ALL DAY.
Google basic buttons don't work--can't log out or other basic functions.
Website use is impaired.
It took almost 3 hours to do a basic online order on one of them--at this rate, I'll be out of business soon, and it's seriously impairing Christmas preparations!
Google Voice/Video are screwed up, had to RE-download their voice/video plugin all over again--again.
Voice/video quality is REALLY poor.
Lag times in so many things are bad.
Thought this would download WITH the better writing/bookkeeping programs--NOT!
Mac Maps is piddle compaired with GoogleMaps.
The Email program on the desktop is REALLY hard to use, has few useful functions. It's MAYbe good if one only has ONE email; using it with severeal various email accounts is a serious liability in many ways--like filing, sorting, marking, etc.; no clear way to move email files to an external drive to save, to unload the HD.
HOW can Safari and Mavericks be fixed?
IF not, HOW can I REMOVE Mavericks and get back to Mountain Lion--which was not too great, but certainly more functional than Mavericks!
I NEED my web-based emails to work--NOW...NOT when Mac finally gets around to fixing things sometime later.
I NEED online ordering to work--NOW--not later when Mac finally gets around to fixing things.
PLEASE someone--any help out there? I couldn't even find but a rare hint that Safari 7.0 even exists--much less that anyone admits it's got problems, nor fixes for it.
What to do? Throw the whole unit out? Wipe and reboot? Dumb it back to OS 10? HOW? WHAT?
[freaking out here...]

Zak Adelman, LexSchellings,
It's a shiney new computer. Came loaded with Mountain Lion.
Too busy learning to use the blessed thing, to download anything....except...
The only pluggin that had to be loaded, was Google Voice-Video pluggin, while Lion was still it's OS. [AND been using the Safari that came already in it.]   Had to do that a couple times--nothing new there--that plug-in had to be re-loaded when using a PC, too--THAT happened even before Google slammed everyone into coerced use of it's Google+.
    [I understood from others, that Firefox won't work in Mac units--or I woulda put that in it to see if that solved anything]
This unit seemed a bit sluggish from the git-go, out-of-the-box.
I figured that was probly the local DSL here---rural DSL is...um...our DSL's not something to brag about, but it's the best we can do...
The difference between speed of loading pages, etc. on the new Mac, was --not-- toooo terribly different--though yes, slower on Mac....and chalked it up to my inexperience with Mac.
Been trying to get things up and running for a bit over a month now.
NOT doing very well at it--just barely getting by; rapidly falling behind what needs done [work].
Google worked just --OK-- when OS was Lion, as did the Google voice/video--slower, and voice-video was kinda scratchy or glitchy, but worked enough to --get by--.
Loading Mavericks, ruined that.
VOIP calls via Google talk have bad echio, static, cut-outs; video calling was pixilated or not working; WAS cued to re-load it's Voice-Video plug-in....which seemed to help a bit, though not very well; it only helped the Voice-Video some, not all--figured that was probably Google issues, less than Mac's, since Google has been increasingly dysfunctional as they have twisted it to be a social media-dominant thing.
[[now seeking an email venue that does what Gmail was good at, including the Voice-video calling, that has no intention of turning itself inside out to be "social"]]
Can't sign out of Gmail or Google+, nor use buttons in upper right corner with the drop-down menu.
NO buttons in upper right corner cluster on Gmail work, except the name+ button to toggle over to Google+---which I don't need! [yeah--THAT's a Google problem!]
Can only switch to HTML version by catching that button as the account signs in--if one fails to be fast enough with their fingers, it goes to Google+; can't get to email unless type in mail.google.com.
Managed to catch that button today, and clicked to use HTML "permanently" until these issues get solved.
ALSO:
Have fairly new [about 1 year?] HP bluetooth printer-scanner.
BUT, after Mavericks loaded: it HAS the unit listed, HAS drivers for it, HP unit IS listed as default printer, everything --seems-- "go",
.....except Mac keeps posting it's out of ink, and/or, not hooked up, and/or not turned on--even when it is on.
It's SUPPOSED to be blue-toothing that printer/scanner.
It did it for Lion, before loading Mavericks, even though it was troublesome to get it to work, it at least HAD printed one document when Lion was the OS.
Thank you...Downloaded EtreCheck:
BTW: Trying to copy/paste data from that check list, to this post, was achaic:
had to use Edit, select all, then use edit again to get it pasted--the mouse buttons weren't allowed to copy-paste using right-click functions [is this a relic limited-function "thing" with Mac?, or is it because I wanted to keep using this new wirless, non-Mac mouse?].
Advice?
See below...
Hardware Information:          Mac mini (Late 2012)           Mac mini - model: Macmini6,1
              1 2.5 GHz Intel Core i5 CPU: 2 cores;           8 GB RAM
Additional:
   Monitor used = Visio flat screen. [not Mac]
   Keyboard = Logitech solar wireless [not Mac]
   Mouse = Logitech wireless
Video Information:           Intel HD Graphics 4000 - VRAM: 1024 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
          OS X 10.9 (13A603) - Uptime: 2 days 19:33:25
Disk Information:
          APPLE HDD ST500LM012 disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (456.94 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          MediaTek Inc MT1806
          Logitech Logitech USB Headset
          Logitech USB Receiver
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.google.keystone.daemon.plist
Launch Agents:
          [loaded] com.google.keystone.agent.plist
          [loaded] com.hp.devicemonitor.plist
          [loaded] com.hp.messagecenter.launcher.plist
User Launch Agents:
User Login Items:
          iTunesHelper
          SpeechSynthesisServer
3rd Party Preference Panes:
          Flash Player
Internet Plug-ins::
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
          QuickTime Plugin: Version: 7.7.3
          Flash Player: Version: 11.9.900.170 - SDK 10.6
          Default Browser: Version: 537 - SDK 10.9
          o1dbrowserplugin: Version: 4.9.1.16010
      ====== npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 ===[this was in red]=====
          googletalkbrowserplugin: Version: 4.9.1.16010
Bad Fonts:
          None
Old applications:
          HP Device Monitor:          Version: 2.7.0 - SDK 10.5
                    /Library/Printers/hp/hpio/HP Device Monitor.app
Time Machine:
===      Time Machine not configured! ===[this was in red]===
Top Processes by CPU:
               6%          WindowServer
               4%          Safari
               4%          SafariDAVClient
               2%          EtreCheck
               0%          com.apple.iCloudHelper
Top Processes by Memory:
          303 MB          Mail
          270 MB          Safari    ======[this is version 7.0 ]======
          262 MB          mds_stores
          147 MB          softwareupdated
          147 MB          com.apple.IconServicesAgent
Virtual Memory Statistics:
          1.77 GB          Free RAM
          2.85 GB          Active RAM
          2.36 GB          Inactive RAM
          1017 MB          Wired RAM
          4.64 GB          Page-ins
          111 MB          Page-outs

How can I animate size and rotation on mouse over?

Similar Messages

Maybe you are looking for