How Can I Apply Color into my Datagrif

I Have a Datagrid and the data provider is from database. the
format is :
[No] [JobID] [TargetTime]
How can i apply a color into Datagrid if the TargetTime is
Overdue, can you help me.

May I suggest: Layer - New Adjustment Layer - Black & White, then use the Tint facility.
Personally, I often find it more handy (and providing more control) to use a Curves adjustment layer above all the others. Grab the curves of individual color channels and pull them this way and that to alter the color of what's underneath. It's not hard to keep whites white, blacks black, and give the stuff in between believable coloration.
-Noel

Similar Messages

How can I apply color to black and make it accurate?

Hello,
I have an illustration that is black, white, and shades of gray. I want to apply a color to the black, and have all the grays become tints of that color. I have tried different blending modes and I have tried monotones, but I don't think either of these techniques are working. When I go back to check the color, it's a different color, and it prints looking different than the color I had selected.
Do you know how I can make this happen?

May I suggest: Layer - New Adjustment Layer - Black & White, then use the Tint facility.
Personally, I often find it more handy (and providing more control) to use a Curves adjustment layer above all the others. Grab the curves of individual color channels and pull them this way and that to alter the color of what's underneath. It's not hard to keep whites white, blacks black, and give the stuff in between believable coloration.
-Noel

How can i apply different color for each cell in jlist component?

hi guys i need your help and sorry if my english is very bad..guys how can i apply different colors for each cell in jlist component? for example for the first cell i want to apply color blue, for the second cell i want red, etc... i need your answer guys tnx..
Edited by: ryrene on Mar 21, 2010 12:13 AM

ryrene wrote:
hi guys i need your help and sorry if my english is very bad.
..guys how can i apply different colors for each cell in jlist component? for example for the first cell i want to apply color blue, for the second cell i want red, etc... i need your answer guys tnx..I'll see your tnx, and raise you dve bmbrs & nplm.

How can i apply gradient...

I have a rectangular shape movie Clip (Size :130px X40 px). I
want to apply linear gradient on it using action script. Can
anybody help me how can I apply gradient on it.
Note: This movie clip is made manually. Not by using
createEmptyMovieClip method.

i already checked this -
MAKE A OVAL ON YOUR STAGE AND GIVE THIS INSTANCE NAME 'ovl'
(withought single quote) and use the code under
here i am creating two movie clips on stage --
1st is 'ovl' and 2nd one is 'mc'
But to apply gradient on ovl i have to use setMask method
like this _root.mc.setMask(_root.ovl)
i do not want to use SetMask... I want to apply gradient
directly on 'ovl'
How can i do ??????????????
// create emtpy movieclip
mc = createEmptyMovieClip("mc",1);
// set the constants for the gradient fill
// the colors
col = [0x000066,0x0033FF];
// the alphas
alp = [100,30];
// the ratios
rat = [100,255];
//this.onMouseMove = function () {
// we will make a radial gradient
// and make it move with the mouse
// first we clear the previous gradient fill
mc.clear();
// get the mouse-position
// the x-coordinate
x = _xmouse-200;
// the y-coordinate
y = _ymouse-200;
// set the matrix for the transformation
matrix = { matrixType:"box",x:x,y:y,w:400,h:400,r:0 }
// now make the new gradient fill
mc.beginGradientFill("linear",col,alp,rat,matrix);
// now make the shape to fill
mc.lineTo(400,0);
mc.lineTo(400,400);
mc.lineTo(0,400);
// end the fill
mc.endFill();
_root.mc.setMask(_root.ovl)
Text
Text

How can i apply maxlength constraint on TextField Through JavaScript ?

How can i apply maxlength constraint on TextField Through JavaScript ,
when i am adding the row dynamically & adding the textfield dynamically into it . I can set its attributes like name, size, focus & else, But why its not setting maxlength attribute through javascript ?
If any body is fammiliar with this problem Please answer the question.

Hi Ashoka,
here is the code to get the length of the test field. then you can set your own textfield restriction. I hope this what you are searching. or else you can set the max length of the text field in HTML tag itself it is very easy.
HTML : <input name="textfield" type="text" maxlength="25">
JAVASCRIPT:
<html>
<head>
<title>mAX tEXT <title>
<script>
function maX()
     var data = document.form1.textfield.value
     len = data.length
     alert("Max Value "+len);
     return true;
</script>
</head>
<body>
<form name="form1" method="post" action="">
<input name="textfield" type="text">
<input type="button" name="but" onClick="return maX()">
</form>
</body>
</html>

I have 3 itunes accounts. How can I merge them into one?

I have 3 itunes accounts. How can I merge them into one?

Sorry, but the only answer is that you can't.

I have multiple documents how can I combine them into one document?

I have multiple document files in Pages. How can I combine them into one document?

Menu > View > Page Thumbnails > click on the thumbnails > Copy/Paste into thumbnails of other document
Peter

I have 3 podcast folders in my iTunes account, how can I combine them into one folder in my iTunes library?

I have 3 podcast folders in my iTunes account, how can I combine them into one folder in my iTunes library?

What is the title of the other bookmark folder that can not be deleted?
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Please report back soon.

TS3981 After migration files are now shared between two user accounts. How can I combine them into one account?

After migration, from PC, files are now shared between two user accounts.I have to switch users to access files. How can I combine them into one account?

See Pondini's Transferring files from one User Account to another, for starters

Due to circumstances I have three iCloud accounts, How can I amalgamate them into one iCloud account?

Due to circumstances I have three iCloud accounts, How can I amalgamate them into one iCloud account?

No, unfortunately you cannot merge accounts or transfer any purchased content from one account to another. As I said Apple won't let you do that.
See also here: http://support.apple.com/kb/HT5622?viewlocale=en_US
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.

How can i apply adobe bridge in my ipad 2?

how can i apply adobe bridge in my ipad 2?

As when installing an app on a computer, there must be a version for the app that is compatible with the computer and the OS running the computer.
Is there an Adobe Bridge app for the iPad available via the iTunes app store?

How can I get back into my application aftermath invoking Start up page of index.htm ?

Gorgeous Hello All,
If anyone of you can please provide me a solution for the following, will help me in plentious and galore.
Am using Adobe RoboHelp, Version 10 and IE version being 10.
A hurdle :-
I have a application which has been developed in ASP .NET, Version 4.0. Help link has been created in this application wherein here the Start up page of index.htm has been linked to be read from the RoboHelp local project folder\!SSL!\Multiscreen_HTML5\desktop. All are working absolutely fine except when
I login into the above-said application -> click on the Help page -> the index.htm opens with Contents, Index, Glossary -> Am able to successfully perform any task by respective clickings
-> But I am not able to get back into my application when I click on the IE provided Back button (Alt+Left) -> Any amount of invoking Back button makes the system getting looped into this Start up page of index.htm only -> When I Close Tab (Ctrl + W) or Close ( X ) -> The window session gets closed and I have to repeat all by relogin once again.
How can I get back into my application aftermath invoking Start up page of index.htm ?
(I can always get back into the application easily by erasing those parts in the url which refers to this RoboHelp linkages – but this certainly looks non-polished work)
Help Please
Cheese – Vipin Nambiar, Bangalore

Hey Jeff, I used Internet Explorer 10.0.9200 and Google Chrome 26.0.1410. Alas - it is the same behavior.
(But Jeff : When I used Microsoft HTML Help as primary layout to generate chm file , My Help when launched from my Application opened in a new browser window and when I closed this Help browser window did not close my application. Looks like need to write few liner code to get this issue settled )
Thanks Indeed of lots for your concerns Jeff !!!

How can I Insert data into my msaccess Database table

Hello all,
I am new to Java programming and I have problem that how can i insert name into my database table.
The code which i have written is following:
String filename = "d:/test.mdb";
String database = "jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=";
database+= filename.trim() + ";DriverID=22;READONLY=true}";
Connection con = DriverManager.getConnection(database,"","");
String s = String.valueOf(text.getText());
int k =10;
Statement st = con.createStatement();
st.execute("create table Test123(name text)");
st.execute("INSERT INTO Test123 values" +s);
on the INSERT program throws exception???
can any one help me how to insert data into tabel.
Thanks

he INSERT program throws exception???
can any one help me how to insert data into tabel.I have never used the jdbc driver to access, but what do you think that the flag READONLY=true means? An insert is not a read.
Kaj

When I try to sync my music on my iPhone 4 I have a tab at the top that says 'on this iPhone' The music in that tab is always on my phone but does not show in my itunes library. How can I get it into my library?

When I try to sync my music on my iPhone 4 I have a tab at the top that says 'on this iPhone'. This is at the end of all the other tabs like info, ringtones, music etc. The music in that tab is always on my phone but does not show in my itunes library. How can I get it into my library? It doesn't sync either.

The new iTunes has a somewhat different look from the previous version. You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes. Or you can adapt to the new look.

My adobe illustrator is in a foreign language. how can i turn it into english?

my adobe illustrator is in a foreign language. how can i turn it into english?

First please remember this is a public forum. If you are going to respond to the thread via e-mail please remove your signature prior to responding.
To resolve your difficulties you will need to go to the Language & Text preference pane. Once there click on Edit List and remove all languages besides English. You will then likely need to remove and reinstall the trial as the language setting I believe is set during the installation process.

How Can I Apply Color into my Datagrif

Similar Messages

Maybe you are looking for