How can I bind a dynamic attribute of a context node to ALV?

Hi all,
I'm trying to show data with Webdynpor ALV, but i met a question which blocked me. The situation is that there is a static context node and it's mapped to WD ALV, while programming I create a dynamic attribute to the context node. The dynamic column can be shown on the UI, but there is no any data in it. How can i deal with it?
Thanks a lot!
Edited by: Julia Zhu on Dec 3, 2009 7:48 AM

Hi Julia,
Welcome to SDN.
Post it in the ABAP webdynpro forum to get quick replies. Web Dynpro ABAP
Also search in sdn as there are chances that somebody has already posted the queries related to same issue.
Regards,
Swarna Munukoti.

Similar Messages

Adding dynamic attributes to static context node

Hi All,
I have defined a context node LINES with several attributes. This is done staticly during developmenttime.
During run-time node LINES is extended with several attributes dynamicly. See below:
10     HEADER_GUID               ->
11     DETAIL_GUID               ->
12     EXTERNAL_ID               ->
13     OBJECT_TYPE               ->
14     IN_OUT_PLAN               ->
15     TRAFFIC_LIGHT_1               ->
16     TRAFFIC_LIGHT_2               ->
17     TRAFFIC_LIGHT_3               ->
18     TRAFFIC_LIGHT_4               ->
19     _LOCATION          \TYPE=STRING     ->
20     _ZZTOPGROUPING     \TYPE=STRING     ->
21     _STATUS          \TYPE=STRING     ->
22     _100000200          \TYPE=STRING     ->
19..22 are added dynamicly.
I have an internal table that matches de new context. This <fs_tb_tree_new> I want to bind like:
*&- bind table
lr_node->bind_table( new_items = <fs_tb_tree_new>
                       set_initial_elements = abap_true ).
In <fs_tb_tree_new> the dynamicly added attrbutes contains values e.g. (the static attributes also have values via <fs_tb_tree_new>):
                     _LOCATION   _ZZTOPGROUPING _STATUS              _100000200
5     Africa     0002     Reporting Entity     0.000
6     Russia, CIS     0003     Identify                          0.000
An ALV presents the values of the attribute. But.... only the values of the static part are presented, not the dynamic attributes added during runtime.
Please advise what I forget or do wrong .
Thanks in advance.
John

I solved the issue:
If you use a combination of static attributes added with dynanic attributes (during runtime) for dynamic ALV, I advise to create a new node and bind the values to this new created node:
Cheers, John
wd_this->extend_context( EXPORTING im_struc_descr = lr_cl_abap_structdescr
                           IMPORTING ex_node = lr_node_alv ).
Method:
*&- Create new dynamic context LINES_DYN
Node for alv-table
lr_node_info = wd_context->get_node_info( ).
CALL METHOD lr_node_info->add_new_child_node
    EXPORTING
      name                  = 'LINES_NEW'
      static_element_rtti   = im_struc_descr
      is_static             = abap_true
      is_multiple           = abap_true
      is_multiple_selection = abap_false
    RECEIVING
      child_node_info       = lr_subnode_info.
lr_node = lr_subnode_info->get_parent( ).
lr_node = wd_context->get_child_node( 'LINES_NEW' ).
ex_node = lr_node.
*&- bind table for alv
lr_node_alv->bind_table( new_items = <fs_tb_tree_new>
                           set_initial_elements = abap_true ).

How can I fill combobox dynamically?

I have a combobox which I have to fill dynamically. The data source I have has multiple columns.
How can I bind this with combobox?
How can I set which column has to bind with combobox label and which with data?

<mx:ComboBox dataProvider="{myDataProvider}" labelField="myDatabaseField" />

How can I do a dynamic include of a page fragment?

I have a technical support website with a lot of simple html pages. What I want to do is hyperlink from the index page to another page, which would display these html pages as a page fragment, dynamically based on a session bean set by the hyperlink.
I basically want to do this, if it was possible:
<jsp:directive.include file="#{SessionBean1.pageToDisplay}"/>
Now the FAQ's has a topic "How can I do a dynamic include of a page fragment?", which would seem to answer my question.
But this is all it says, and it makes no sense to me. Could someone please translate? :)
"Using a page fragment file (but using instead of the usual Creator approach) will accomplish a dynamic include."

Here is 1 solution:
First add this to the jsp:root tag:
xmlns:c="http://java.sun.com/jsp/jstl/core"
Then surround the page fragment directive with something like this:
                        <div style="position: absolute; left: 24px; top: 408px">
                            <c:if test="${SessionBean1.count > 0}">
                                <jsp:directive.include file="testPF.jspf"/>
                            </c:if>
                        </div>

How can I apply text position attributes (e.g. lower third) to more than one title at a time?

How can I apply text position attributes (e.g. lower third) to more than one title at a time?

jhb3243
What version of Premiere Elements are you using and on what computer operating system is it running?
In the case of this theoretical lower third to be applied to more than one title at a time
a. Is there text in the lower third besides a graphic of some kind?
b. Are all the titles to which this lower third is to be applied all together on the Timeline or scattered?
If no text in lower third and titles all together, then, with text titles on Video 1 and lower third on Video 2, drag out the lower third to cover the length of the text titles on Video 1.
I do not find "lower third" title files to be in the same category as certain effects where the Copy and "Paste Attributes" or "Paste Effects and Adjustments" lend themselves so well.
Let us see what others have to say about all this. I will continue to experiment with what you seek and how you would prefer to get there. I am not optimistic but I will try.
Thanks.
ATR

How can I add a custom attribute to a catalog area? (CRM Isa Sales)

Gents,
How can I add a custom attribute to a catalog area? (CRM Isa Sales)
Actually I would like to use the Catalog Area Type (maintained in trx COMM_PCAT_ADM on Catalog Area Header level). This field doesn't seem to be available in J2EE webshop. (The field documentation says it is for documentation purposes only so I don't expect it to be transferred).
As this field is not readily available, I would like to add is as an attribute to the Catalog Area. BADI's PCAT_IMS_FEED_ATT and PCAT_IMS_FEED_VAL seem to indicate that it should be possible to add additional fields not only on product level, but also on Area level:
Example implementation code:
method IF_EX_PCAT_IMS_FEED_ATT~READ_NEW_FIELDS.
* Example, how to add new attributes to a indexcategory
* Possible levels are 'C'ategory and 'P'roduct.
* Field 'VALUE' carries the attributetype ('S'tring, 'I'ntegar or
* 'F'loat)
* Structure 'IS_OBJECTS' carries actuall identifiers
data: ls_fields        type comt_pcat_ims_feed_ux.
case iv_level.
    when 'C'.                        "Category Level
*     no new field
    when 'P'.                        "Product Level
      ls_fields-field = 'CUSTOMER_EXIT_FIELD'.
      ls_Fields-value = 'S'.
      append ls_fields to ct_fields.
*     exproduct fields
      ls_fields-field = 'REMAN_ABL'.
      APPEND ls_fields TO ct_fields.
      ls_fields-field = 'EXCH_BUS'.
      APPEND ls_fields TO ct_fields.
endcase.
endmethod.
However, when I create an implementation and add some code in the when 'C' part, the attributes do not seem to get transferred. (I've checked in the debug mode of the developer studio).
- My example code:
METHOD if_ex_pcat_ims_feed_att~read_new_fields.
* Possible levels are 'C'ategory and 'P'roduct.
* Field 'VALUE' contains the attributetype
* ('S'tring, 'I'ntegar or * 'F'loat)
DATA:
ls_fields LIKE LINE OF ct_fields.
CASE iv_level.
    WHEN 'C'.                        "Category Level
      ls_fields-value = 'S'.
      ls_fields-field = 'ZTEST'.
       APPEND ls_fields TO ct_fields.
    WHEN 'P'.                        "Product Level
ENDCASE.
ENDMETHOD.
and:
METHOD if_ex_pcat_ims_feed_val~read_new_fields.
CASE iv_level.
    WHEN 'C'.
     ls_fields-field = 'ZTEST'.
     ls_Fields-value = 'Value 1'.
     append ls_fields to ct_fields.
    WHEN 'P'.
ENDCASE.
ENDMETHOD.
In the ABAP debugger, I can see that my code is touched during initial and delta replications, however, after replication, the fields do not show up in the Java debugger.
Any ideas?
regards,
Wilco Menge

Hi,
How can I customize the /bin/wcmcommand or how can I make use of [2] to create a custom WCMCommand?
I think the "formUrl" is to post those input value to the jcr repository?
var createDialog = {
        "jcr:primaryType": "cq:Dialog",
        "id": CQ.Util.createId("cq-createdialog"),
        "title":CQ.I18n.getMessage("Create Page"),
        "formUrl": CQ.shared.HTTP.externalize("/bin/wcmcommand"),
        "params": {
            "cmd":"createPage",
            "_charset_":"utf-8"
I have added a field called "starred"
Moreover, when I using the firebug to trace the post command, I can see that the starred value is posted also.
:status
browser
_charset_
utf-8
cmd
createPage
label
b
parentPath
/content/keyword_elaboration
starred
c
template
/libs/collab/commons/templates/form
title
a
Source
cmd=createPage&_charset_=utf-8&%3Astatus=browser&parentPath=%2Fcontent%2Fkeyword_elaboration&title=a&label=b&starred=c&template=%2Flibs%2Fcollab%2Fcommons%2Ftemplates%2Fform
However, when I go to the crxde to view the node's attribute, the properity starred is not created
Are there anything I did wrong or missing?
Thanks.
Message was edited by: aslkit

How can i add a dynamic header value in to the pdf

I am using a AssemblerService (Invoke DDX) to modify a Pdf file. How can i enter a dynamic value into the header using ddx ?
DDX used
<DDX xmlns="http://ns.adobe.com/DDX/1.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://ns.adobe.com/DDX/1.0/ coldfusion_ddx.xsd">
    <PDF result="Out1">
        <PDF source="Doc2">
            <Header>
                <Right>
                    <StyledText>
                        <p>"here i need to add a dynamic data from the process"</p>
                    </StyledText>
                </Right>
            </Header>
        </PDF>
    </PDF>
</DDX>
Thank You.

Insertion Point is a placeholder Object which is used to dynamically replace while assembling. Search through the assmber guide to get any hints.
Nith

If I know a name of class , how can I get it's attribute and methods

If I know a name of class , how can I get it's attribute and methods as well as it's detail information by ABAP code ?
Best regards ,

HI, Chandra ,
Thank you very much , I can get the result
Best regards,
DATA lo_class TYPE REF TO cl_oo_class.
DATA lt_attribs TYPE seo_attributes.
FIELD-SYMBOLS: <attrib> TYPE vseoattrib.
TRY.
    CREATE OBJECT lo_class
      EXPORTING
        clsname = 'CLASS_NAME'.
CATCH cx_class_not_existent .
ENDTRY.
lt_attribs = lo_class->get_attributes( ).
BREAK-POINT.

How can I create classes dynamically?

Guys
My requirment is I want to create classes and their instancess too dynamically. First is it possible in Java?
If so, then my next question is how can I refer such dynamically created classes in my code to avoid compilation error.
Thanks in advance
Regards
Sunil

For other ways to generate classes on runtime you could also have a look at BCEL:
http://jakarta.apache.org/bcel
And dynamic proxies:
http://java.sun.com/j2se/1.4.2/docs/guide/reflection/proxy.html
If so, then my next question is how can I refer such
dynamically created classes in my code to avoid compilation
error.Generally the classes that you load should either implement some interface or extend some abstract class you know of at compile time so that the compiler knows what methods are available for use. If that's not possible you can only use reflection.

JDev TP3 / UML Class Diagram / How can I specify a derivative attribute?

Hello,
I'm trying to put derivatives (or calculated) attributes such as "age" or "price" in a class of UML diagram. In all of UML books that I've seen, a derivative attribute is represented with a "/" and the attribute's name. For example, "/age" or "/price". But in the class diagram of JDeveloper I can't put "/" in the name of attribute. So, how can I specify a derivative attribute?
Thanks in advance,
JVN

Unfortunately, it is not possible to denote derived attributes in TP3. Bug 6915067 has been logged to address this in a future version.
Thanks, Guus (JDev PM)

How Can I Split Multi-Valued Attributes in Syndicator Map?

Is the option to split multi-values only available for fields and not on attributes that are also multi-valued?

How Can I Split Multi-Valued Attributes in Syndicator Map?
Currently this feature are not in MDM you can split this value by using any middleware software for e.g. PI
Is the option to split multi-values only available for fields and not on attributes that are also multi-valued?
Correct, Multi-values option only available for field not for attributes
Thanks,
Jignesh Patel

Bind Dynamic Table To a Context Node

Hello,
I created an internal dynamic Table. I want to show this table in an ALV-Table. So I want to bind it to a context node.
I create the context node attributes by this:
lr_node_info ?= lo_nd_template_exp->get_node_info( ).
*Type of table type and context type have to be the same
LOOP AT lt_plchar INTO ls_plchar.
clear lv_text.
lv_text = ls_plchar-plchar.
TRANSLATE lv_text TO UPPER CASE.
ls_fieldcatalog-fieldname = lv_text.
ls_fieldcatalog-inttype = 'C'.
ls_fieldcatalog-intlen   = '10'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
ls_attribute-name = lv_text.
ls_attribute-type_name = 'CHAR10'.
lr_node_info->add_attribute( EXPORTING attribute_info = ls_attribute ).
ENDLOOP.
So I create a fieldcatalog and the attributes at once.
Then I generate the table with this:
CALL METHOD cl_alv_table_create=>create_dynamic_table
       EXPORTING
         it_fieldcatalog = lt_fieldcatalog
       IMPORTING
         ep_table = <fs_data>
       EXCEPTIONS
         generate_subpool_dir_full = 1
         OTHERS = 2 .
IF sy-subrc <> 0.
ENDIF.
* So now points to our dynamic internal table.
ASSIGN <fs_data>->* TO <fs_1>.
* Next step is to create a work area for our dynamic internal table.
CREATE DATA new_line LIKE LINE OF <fs_1>.
* A field-symbol to access that work area
ASSIGN new_line->* TO <new_line>.
Data: copy_table type ref to data.
field-symbols: <copy_table> type standard table.
create data copy_table like table of <new_line>.
assign copy_table->* to <copy_table>.
ok, nice. when i now bind the table to <copy_table> to lo_nd_template_exp it all works fine. But i also want to but the data into the table.
This also works. When I debug, I can see the table filled with the values. But then there's always this error:
Invalid operand type for the MOVE-CORRESPONDING statement.
Ok, I have read, that the types may be not fit. But I don't know why and how i can solve it.
Do you have any ideas?

Hi,
I've the same problem: I must create all attribute of my node at run-time and then create alv.
I use the method:
DATA lo_cmp_usage TYPE REF TO if_wd_component_usage.
DATA lo_interfacecontroller TYPE REF TO iwci_salv_wd_table .
lo_cmp_usage =   wd_this->wd_cpuse_alv( ).
IF lo_cmp_usage->has_active_component( ) IS INITIAL.
    lo_cmp_usage->create_component( ).
ENDIF.
Pass context node to ALV
lo_interfacecontroller =   wd_this->wd_cpifc_alv( ).
lo_interfacecontroller->set_data( node_lenght ). " node_lenght is my dynamic node
But I receive this message error:
Invalid operand type for the MOVE-CORRESPONDING statement.
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_BS_SERVICE_MNGR_TABLE=CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
What can I do??? My node doesn't static attribute....
Thank,
Federica.

Removing the dynamic attributes from view context

Hi,
I have added an attribute dynamically using the following line of code in wdDoModifyView():
wdThis.wdGetContext().getContext().getRootNodeInfo ().addAttribute(<attributename>, <datatype>);
Now I want to remove the dynamically created attribute from the context.
Pls suggest me in this regard.
Regards,
Ramesh.

Hi Ramesh,
You can use the following code to remove the attribute dynamically:
Iterator itr = wdContext.node<NodeName>().getNodeInfo().iterateAttributes();
<i>// If the node where you are making these attributes is a context node then just do:</i>
// <b>wdContext.getNodeInfo().iterateAttributes()</b>, <i>for iterator</i>
while(itr.hasNext()){
IWDAttributeInfo attrInfo = (IWDAttributeInfo)itr.next();
attrInfo.remove();
This will solve your problem.
Regards
Pravesh
PS: Please consider rewarding points if helpful and solved.

How can we assign different colours to different records(line items) in alv

how can we assign different colours to different records(line items) in alv reporting?

Hi Friend,
Please see this SDN Wiki for setting the color in ALV :[http://wiki.sdn.sap.com/wiki/display/ABAP/ABAP-DevelopingInteractiveALVReportusing+OOABAP]
There are so many SDN Wiki's on this just try with search Alv Color display in SDN,
Regards,

How to read the attribute in another context node from setter method

Hi,
As part of the requirement
i need to read the STRUCT.E_MAIL ( attribute ) present in INDEPENDANTEMAIL context node from the SET_S_SRUCT method of the context node HEADER.
I tried th following but it didnt work out....
Get the Custom Controller Path
*lr_cuco ?= controller->get_custom_controller( controller_id = 'BP_HEAD/IndComm').
*IF lr_cuco IS BOUND.
Get the Entity
*lr_entity ?= lr_cuco->typed_context->independantemail->collection_wrapper->get_current( ).
*ENDIF.
*CHECK lr_entity IS BOUND.
Get the Trade Event Type.
*lv_email = lr_entity->get_property_as_string( 'E_MAIL' ).
also i tried ...
data:
*lv_value type string,
*lr_property type ref to if_bol_bo_property_access.
*lr_property = collection_wrapper->get_current( ).
*lv_value = lr_property->GET_PROPERTY_AS_STRING( importing iv_attr_name = 'E_MAIL'
returining ev_result = lv_email ).
but it didnt workout ......
Any suggestions ...................
Regards,
Sijo...

Hi,
Both Context node are available in view then refer this link.
Reading Attributes from different context nodes in the same view
Relationship name for context node INDEPENDENTMAIL is 'BuilIndependantEmailRel'
Regards
Gaurav

How can I bind a dynamic attribute of a context node to ALV?

Similar Messages

Maybe you are looking for