How can I build a ragged Entity dimension with ERPi

All,
I am trying to build an Entity dimension for Planning with ERP Integrator v11.1.2.1, the source is EBS 12.
In the source system I am building from there is a single parent entity with six child entities, there are then 8 hierarchies of cost centres with no common parent, these cost centre groups define different business areas within only one of the entities, the cost centres for the remaining entities have not yet been defined.
In the ERP Setup I have specified that the Entity dimension should be built from the Entity and Cost Centre segments and I have created metadata mappings for each parent entity and cost centre ancestor pair (eight in all), the Enitiy segment is traversed first followed by the Cost Centre; all are defined as Base Hierarchies. Each pair has a separate hiearchy name, I tried to define only one of these as a base hierarchy and reuse the name for each pair but this resulted in an error:
Run Time Error: The hierarchy 'Total Entity' cannot share the parent member 'Total Entity' with the hierarchy 'Total Entity'
At the moment I get a hierarchy where all cost centres are associated with all child entities.
Can anyone advise what needs to be done to achieve the following:
- Get the dimension to build with the cost centres as children of the entities to which they relate.
- Build the entity dimenion beneath a single common parent e.g. 'Total Entity' rather than eight separate parents (one for each entity/cost centre mapping).
Thanks

Gavin,
i have the same issue, can you please share, how you were able to solve this.

Similar Messages

  • How can I build a LabView application that uses the 2012 runtime, on a development system with LabView 2013 or 2014 installed?

    I need to build a LabView application .exe to run with the 2012 Runtime, for legacy support. I currently have LabView 2013 installed on my development system, and have 2014 available. How can I build an application that uses the 2012 runtime on this development system? Do I have to downgrade to 2012? Thank you.

    We have existing customers that have installed our application that was originally built with 2012 (provided by a contractor that is no longer available).  Due to IT regulations, it is far easier to update these customers by simply replacing the .exe file, than creating an install that their IT department must run.
    If I have to downgrade to LabView 2012, where can I get the installation for this?

  • How can i build RPMs file for my own Java Application?

    How can i build RPMs file for my own Java Application?....I have my own directory that contains all Java Source files and some files that my Application required....I want to build RPMs file like a install File to Linux System, Now my OS is Linux Fedora core 1.....How can i do this?

    I think that in order to create a RPM, you'd need to
    use some C.Nope - the RPM is all about packaging and the "magic" x.spec file. You can have anything you want in the RPM, but you have to use RPM tools to build the .rpm file. One of the features is that you can also indicate (via "install" scripts) modifications to other files or the filesystem to support the installation of whatever's in the RPM.

  • How can i build table with two user name columne  ?

    How can I build view with two columns for user name ( one create and the other
    Can change also ) 
    And to display full name ( the user name is the key but not display  ) ?

    Hi,
    Creating View
    •     From initial screen of data dictionary(T.Code: SE11), enter the name of object i.e. view.
    •     Select view radio button and click on the push button.
    •     Dialog box is displayed for types of views.
    •     Select the view type.
    •     On the next screen, you have to pass following parameters.
    •     Short text
    •     In the table box you need to enter the table names, which are to be related.
    •     In join table box you need to join the two tables.
    •     Click on the TABFIELD. System displays the dialog box for all the table fields and user can select the fields from this screen. These fields are displayed in the view fields box.
    •     Save and Activate: When the view is activated, view is automatically created in the underlying database system. As long as the table exists in the database, the view also exists (Unless you delete it).
    Regards,
    Bhaskar

  • How can you build time series measures in OBIEE without using TODATE AGO fu

    How can you build time series measures in OBIEE without using TODATE and AGO function?
    Please provide steps to build time series
    measures in OBIEE without using TODATE and
    AGO function. Dashboard results not storing
    in cache when using TODATE and AGO functions.
    eventhough its cached users queries not
    hitting cache because queries doesn't match
    exact date time when using TODATE and AGO
    functions. so I want to build queries using
    sysdate and some simple calculations. Please
    send your inputs/ideas for my questions..
    Thanks in Advance

    This can be using Msum function in answers. Use the following formula, here dollars is my metric. Change the formula based on your metric.
    Msum("Sales Measures".Dollars ,2) - "Sales Measures".Dollars
    the report will be cached and better performed compared with time series. check ti
    - Madan Thota

  • How can we know that size of dimension is more than fact table?

    how can we know that size of dimension is more than fact table?
    this was the question asked for me in interview

    Hi Reddy,
      This is common way finding the size of cube or dimensions or KF.
    Each keyfiure occupies 10 Bytes of memory
    Each Char occupies 6 Bytes of memory
    So in an Infocube the maximum number of fields are 256 out of which 233 keyfigure, 16 Dimesions and 6 special char.
    So The maximum capacity of a cube
    = 233(Key figure)10 + 16(Characteristics)6 + 6(Sp.Char)*6
    In general InfoCube size should not exceed 100 GB of data
    Hope it answer your question.
    Regards,
    Varun

  • How can i build a java parser/interpreter

    How can i build a java parser/interpreter
    i know java offers a tokenizer, how can i use it for build a parser or interpreter that recognize tags like this:
    <query db="db1" select="row1, row2">
    and then perform some actions

    how can i use it for build a parser or interpreter that recognize tags like this:A compiler design class would help understand the issues involved.
    Or as suggested if you are merely trying to parse XML then there are variety of existing solutions.
    Of if not XML and you already understand the principles of compiler design (formally or perhaps with experience with lexx/yacc) then you could use JavaCC
    http://www.webgain.com/products/java_cc/

  • How can I build Windows Like Help In Oracle Developer ?

    Could anyone help me by giving the information that how can I build a windows like help system ?
    Thanks In Advance.
    Saiful Alam

    I remember that in Oracle Develope 6.0 demos there are lots of this kind of help,but I don't know how to do it.If u can solve this problem,pls post it.

  • How can I build and run CDC in Red Hat Linux?

    I downloaded the CDC and CVM(j2me_cdc_fp-1_0_2-src.zip), and wanted to build a VM in Red Hat Linux. But I can't find the Makefile in the "build" directory. How can I build it?

    You should be able to run a J2SE VM with the CDC jar as the bootclasspath, I think.

  • How can I build a sum of two rows in a CNiReal64Matrix?

    How can I build a sum of two rows in a CNiReal64Matrix?

    You could copy the two rows that you want to add into two CNiReal64Vectors via CNiReal64Matrix::CopyRow, then add the two CNiReal64Vectors via CNiReal64Vector::Add or CNiReal64Vector:perator+.
    - Elton

  • How Can I Build Mailing List Portlets?

    I want to make a portal with a mailing list portlet. I need to know how can I build the servlet for my apache server.

    By a mailing list portlet, do you mean a portlet where users can sign up for different mailing lists, or do you mean a specific mailing list that would archive all the messages sent to the list?
    In any case, if you have an existing application that manages a mailing list (like a list on listbot.com), one of the options you could investigate is to integrate that application as an External Application to Portal and leverage the Single Sign On capability.
    null

  • How can I build Instalation Program for java applet?

    I want to build on line internet game based on java applet.
    Uset must instull the game to his computer.And this program mast Connect to the server when user enter
    to this application.Not from explorer,but from my application,like when i enter to ICQ.
    My questions:
    How can i build instalation program in java?
    How can i connect to the server when user enter into my game not from explorer but from game?
    Thanks,Maya.

    Hi Maya
    First of all an Applet does not have to be "installed" as you would with a normal application. The browser handles the install and execution of the applet.
    Check out this URL for more about applets:
    http://web2.java.sun.com/docs/books/tutorial/applet/index.html
    On the subject client/server pairs - see:
    http://web2.java.sun.com/docs/books/tutorial/networking/sockets/index.html
    If you decide to make the game an application instead check out Sun's WebStart - under the products section.
    That's about all the help I can give you.
    Programming a game is a complicated subject - I am doing one too:
    http://hjem.get2net.dk/mhjembaek/armageddon/
    Kind reg,
    Hjembaek

  • How can i build a manchester coding in labview signal processing?

    how can i build a manchester coding in labview signal processing?
    mean to say that how can i digitize my audio input.i waqnt to convert my audio input into manchester coded data format!!!
    kindly post related VIs
    regards
    Solved!
    Go to Solution.

    idma-
    Check out the LabVIEW FPGA example http://zone.ni.com/devzone/cda/epd/p/id/6126
    Generate Manchester Signal
    Basic example showing generation of a Manchester encoded data stream. The data to be sent is generated in one loop and passed to a FPGA FIFO. The subVI which generates the Manchester data stream reads the data bytes form the FIFO and passes them to the digital output. The subVI prepends a simple header to each data packet which allows a reader (see next example) to synchronize and acquire/parse the data. The header consists of a thee half bit pulse followed by a one half bit pulse. The three half bit pulse is not a valid component of regular Manchester encoding and can therefore be differentiated from the rest of the protocol. In addition it can be used by the receiver to to easily measure the bit rate of the protocol. By dividing the length of the three half bit pulse in half (3/4 of a bit), the receiver has a measure to differentiate between full and half bit pulses in the rest of the protocol.
    Generate and Read Manchester Signal
    An extension of the previous example which adds a Manchester receiver subVI. You must physically wire the digital output channel to your input channel to loop back the data outside the I/O connector of your FPGA R series card or C series module. The Manchester receiver subVI is expecting the data packet to be prepended by a header as explained in the previous section.
    I will see if the is a more precise example but this should help
    Sam S
    Applications Engineer
    National Instruments

  • How can I read pdf files from LabVIEW with different versions of Acrobat reader?

    How can I read pdf files from LabVIEW with different versions of Acrobat reader?
    I have made a LabVIEW program where I have possibility to read a PDF document.  When I made this LabVIEW program it was Acrobat Reader 5.0.5 that was installed on the PC. Lather when the Acrobat Reader was upgraded to version 6.0, there was an error when VI tries to launch the LabVIEW program. And Later again when we upgraded to Acrobat Reader 7.0.5 I must again do some changes and rebuild the EXE files again
    It isn't so very big job to do the changes in one single LabVIEW program, but we have built a lot of LabVIEW programs so this take time to due changes every time vi update Acrobat Reader. (We have build EXE files.)
    The job is to right click the ActiveX container and Click "Insert ActiveX Object", then I can brows the computer for the new version of acrobat Reader. After this I must rebuild all the "methods" in the Activex call to make the VI executable again.
    Is there a way to build LabVIEW program so I don't have to do this job every time we update Acrobat Reader?
    This LabVIEW program is written in LabVIEW 6.1, but I se the problem is the same in LabVIEW 8.2.
    Jan Inge Gustavsen
    Attachments:
    Show PDF-file - Adobe Reader 7-0-5 - LV61.vi ‏43 KB
    Read PDF file.jpg ‏201 KB
    Show PDF-file - Adobe Reader 5-0-5 - LV61.vi ‏42 KB

    hi there
    try the vi
    ..vi.lib\platform\browser.llb\Open Acrobat Document.vi
    it uses DDE or the command line to run an external application (e.g. Adobe Acrobat)
    Best regards
    chris
    CL(A)Dly bending G-Force with LabVIEW
    famous last words: "oh my god, it is full of stars!"

  • How can I get a single jar file with NetBeans?

    How can I get a single jar file with NetBeans?
    When I create the project I get these files:
    dist/lib/libreria1.jar
    dist/lib/libreria2.jar
    dist/software.jar
    The libraries that have been imported to create the project are in separate folders:
    libreria1/libreria1.jar
    libreria2/libreria2.jar
    libreria1, libreria2, dist folders are all located inside the project folder.
    I added the following code to the build.xml:
    <target name="-post-jar">
    <jar jarfile="dist/software.jar">
    <zipfileset src="${dist.jar}" excludes="META-INF/*" />
    <zipfileset src="dist/lib/libreria1.jar" excludes="META-INF/*" />
    <zipfileset src="dist/lib/libreria2.jar" excludes="META-INF/*" />
    <manifest>
    <attribute name="Main-Class" value="pacco.classeprincipale"/>
    </manifest>
    </jar>
    </target>
    Of course there is also the project folder:
    src/pacco/classeprincipale.form
    src/pacco/classeprincipale.java
    Can you tell me what is wrong? The error message I get is as follows:
    C:...\build.xml:75: Problem creating jar: archive is not a ZIP archive BUILD FAILED (total time: 2 seconds)

    This is not a NetBeans forum, it is a JDeveloper forum. You might want to try http://forums.netbeans.org/. I also saw your other question - try looking in the New to Java forum: New To Java

Maybe you are looking for