How can I change 3D graph Axis captions programmatically?

Hi All,
          I'm using a 3D graph to display results of a particular set of tests. I wish to change the caption on an axis depending on which test I'm running, e.g. the x-axis to change its caption from Deg C to Time (nS), there doesn't seem to be a property node to facillitate this. Could someone please point me in the right direction?
        Thanks
           Rgds,
            ds1
Solved!
Go to Solution.

If you are using the CW 3d graph then see this thread where I illustrate how to change a property by using the CW 3d graph proprty screen as a guide.
If you are not using the CW 3d graph .... I can not help you.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

How can I change the X-axis increment in a waveformgraph

The X-axis always increments by 1, but I am acquiring one point of data every 100 ms. So my chart moves 10 times fater that the real time. How can I set my x-axis to increment 0.1 every time I add data to my Waveformgraph in VB net?
The X-axis collection is not showing any property to change that.
I have a continuous data acquisition giving me timed data at 100 ms rate.

Thank you for posting to the NI forums. You can set the update increment of the WaveformGraph plot function by using the overloaded function as follows:
PlotYAppendMultiple( ByVal yData As Double(,),
ByVal orientation As DataOrientation,
ByVal increment As Double )
I did this in the VB.NET example program, "ContAcqVoltageSamples_IntClk", by adding the following line to the dataToDataTable function.
WaveformGraph1.PlotYAppendMultiple(sourceArray, NationalInstruments.UI.DataOrientation.DataInRows, 0.1)
The increment will be set to 1 / (sampling frequency), so in your case, it will be set to 0.1. This function is documented in the NI-DAQmx .NET Framework 2.0 Help.
I hope this helps. Post back if you have any further questions.
Ed W.
Applications Engineer
National Instruments
Message Edited by Ed W on 05-04-2007 10:36 AM

How Can I change Color of Button Caption

Hi all ,
I want to change color of button caption in my add on . but I cannot .
I change forecolour of button properties but it doesn't work .
If you have any idea help me please .
Thanks in advance,
msw

As far as I know buttons cannot change forcolor or backcolor - SDK Limitation

How can I change the Y-axis (circular) grid spacing, in Polar Plot VI?

When using Polar Plot VI, I need more control over the plotting parameters. This means tweaking the sub-VIs in various ways. What I need to do most is make the polar magnitude axis less busy, i.e. only draw circles every 10 instead of every 5 divisions, when using a range of 0 (outermost) to -80 (innermost).
The magic 'magnitude axis subdivisions' variable seems to be generated in Calc Scale Specs sub-VI, and output as an array of clusters, but I can't quite see how it's created and from what.
Please can anyone help me gain control over the number of magnitude division circles generated?
Many thanks!

I think if you go inside the Calc Increment.vi and modify the Increment output terminal it might change what you want to see. Try putting a multiply by 5 or ten into the case structure for when the log is false.
Attachments:
polar plot calc increment.jpg ‏90 KB
modify calc increment.jpg ‏104 KB

How can I change the Y axis to show my values in a descending order in Numbers. eg zero at the top and the maximum value at bottom?

Hi,
I'm just about getting to grips with Numbers, but I'm stumped at the moment with this problem.
I want to show zero at the top on the (y) axis, as zero is the goal and 100 is the starting point?
can it be done? i would really appreicate some help on this.
Kind regards
Rob

Is it so difficult to read given answers ?
Barry described the correct scheme.
In the table "to_chart", the cell A1 contains :
=ROUNDUP(ABS(MIN(Tableau 1 :: B:E))/10,0)*10
The cell B2 embed the formula :
=$A$1+Tableau 1 :: B2
Apply fill down and fill to the right.
On the left edge, the colored rectangle is a text block in which I inserted the label values.
Of course if you dislike this scheme, you are perfectly free to use an other application.
Yvan KOENIG (VALLAURIS, France) lundi 4 juillet 2011 14:37:56 iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How can i change my graph title dynamically in my workbook

I've created a chart and saved as a work-book. i need to somehow show the date they selected from the filter. i've tried adding the text box and point to the filter but they enter a quarter and the graph shows a rolling 4 quarters. I want it to say from Q2-2006 - Q2-2007.

figured out on my own.

How can I change Output Method and Mailbox# programmatically (without GUI)?

We have several iR5075s and about 300 workplaces. For security reasons we only allow "Store" output method. So every user has access to some printers and for every printer they need to reconfigure printing preferences.
For convenience we'd like to do the following automatically (via Group Policy or scripts):
1) Change "Output Method" to "Store".
2) Set the correct mailbox number.
The problem is that the related settings seem to be stored in registry as a binary blob (HKCU\Printers\Connections\<printer name>\DevMode). I've been searching for a while but I couldn't find anything that would explain what's what in that blob.
Any clues?
Or maybe there's another way?
P.S. I'm familiar with scripting, regular expressions, etc. Acquiring the necessary parameters (such as mailbox#) is not a problem at all. I only need to know where and what I should change (in registry or elsewhere).
[Edit] Update: Actually it seems the settings are stored in HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows NT\CurrentVersion\Print\Providers\Client Side Rendering Print Provider\<user sid>\Printers\Connections\,,<server name>,<printer name>\RemotePrinterCache. It's also a binary blob though.
Eventually I'll reverse engineer it enough for my goals. I just don't understand why it must be so complicated...

https://mega.co.nz/#!5QQWmaTI!cryW-pykueRNffdDYnj1OpxiHgG0mcAqLOh4Gmt2PJk
But I'm not sure how useful you'll find it. I wrote it as a temporary solution (we're now migrating to UniFlow) and it's anything but universal. At best, I guess, you'll be able to salvage some of my code while writing your own.

How can i change the color of the graph in agreement of the program's condition

Hi,
I am using labview 5.1 in my graduation's project final. (sorry by my english, but i am ina hurry)
How can i change the color of the graph in agreement of the program's condition?
I am developing a VI to control the temperature of termistors,but i have another sensor too.
In a graph i have the situation of the termistors,but i want to change the color of the graph when the sensor is active.
Thanks a lot
Rafael Wajnsztajn - Brasil

To change the color of the line itself, you can use the attribute Plot>>Plot Color.
To change the color of the points, you can use the attribute Cursor>>Cursor Color.
To select the color, you should have a color box constant inside the Numeric>>Additional Numeric Constants palette.
This is all in LV 7.0. I'm not sure how it similar it is in 5.1.
One important thing is to place the attribute node inside a case structure which will execute only when your condition has been filled.
If this didn't help you, I suggest you post the relevant piece of code, or at least an image of it (no BMPs, please).
Try to take over the world!

The caption on an annotation is off the plot area. Even if I cahnge the x and y scaling I still can't see the annotation caption. How can I change it so that I can see it?

The caption on an annotation is off the plot area. Even if I cahnge the x and y scaling I still can't see the annotation caption. How can I change it so that I can see it?

Try calling SetCoordinates on the annotation's Caption property. This method lets you explicitly set the x and y coordinates of the caption.
- Elton

How can I format the y-axis to display durations?

How can I cause the y-axis of this chart to reflect the values in Row 6 [Average Pace (Minutes per Mile)] of the corresponding table in duration format rather than number format. In other words, I need the y-axis to be a list of durations appearing like the figures in Row 6. Also, I need it to begin with the longest duration (10:00) and to climb to the shortest duration (5:00) at the top. I'll should mention that I already tried using the Inspector, but the "Duration" formatting option for the y-axis was not selectable while other formats were. I also tried formatting the y-axis this way to "Same as source data," and this didn't cause it to display durations either, though I had expected it to. Thanks in advance!
Ryan

Hi Ryan,
Numbers can display only numeric values on the Y axis, and those values are always arranged from highest to lowest, with highest at the top.
That said, here's what is possible:
There is, of course, some manipulation of the data involved in this, as well as replacement of the value axis labels with custom labels in a text box.
Here's what's happenng with the man behind the curtain:
While the chart shows the data from row 6, it is actually graphing the data from row 7 (or whatever row you choose to place this data in.
Row 7 uses a formula ( =-60*24*STRIPDURATION(B6) ) to first strip the Duration from the data in row 6, returning a number representing the fraction of a 24 hour day equivalent to the duration in row 6.
It multiplies that number by 24*60 to convert it to the number of minutes (and fractions of minutes) in the duration, and changes the sign of the number to - (negative) so that the shorter values will be higher in the chart.
Selecting row 7 and choosing Line Chart from the Charts Button's menu produces, with one difference, the chart shown after setting the min and max values on the Y axis to -10 and -5 respectively, and incrementing the number of steps on the Y axis from 4 to 5).
The difference, of course, is that the Y axis value labels all show negatic=ve numbers, with no m to indicate they show 'minutes.' To correct this, insert a text box and enter the six numbers 5 to 10, with each followed by an m and a return.
Select the Text box, change the alignment to Right aligned (with the alignment button in the format bar), then drag the box in front of the Value axis labels with the 5s aligned.
In the Inspector, choose Text inspector, then Text. Use the Space after Paragraph stepper to increase the setting until the 10 in the box aligns with the 10 in the Value Axis labels box. You may have to tweak the height of the chart slightly to achieve this alignment.
Select the chart, then choose the Chart Inspector, then Axis. Use Choose Axis Options (for the Value Axis) to uncheck Show Value Labels.
Regards,
Barry

How Can You Change the Look and Feel of Charts in OBIEE 11g

How Can You Change the Look and Feel of Charts in OBIEE 11g?
Edited by: user11973122 on Jul 18, 2012 12:13 AM

Check these files
OFM_HOME\Oracle_BI1\bifoundation\web\msgdb\s_blafp\viewui\chart\dvt-graph-skin.xml
OFM_HOME\Oracle_BI1\bifoundation\web\msgdb\views\dvtchart\obips.dvtchart.xml
OFM_HOME\Oracle_BI1\bifoundation\web\display\chartfontmapping.xml
Pls mark correct or helpful if helps

Array of clusters and in the cluster is a bar meter, how can I change the color individually?

Array of clusters and in the cluster is a bar meter, how can I change the color of the bar meter individually for each element of the array? I have just figured out that you can't change properties of one element of the array without all elements changing. For the scaling I had to make numeric indicators for each tick of the scale so that each bar meter in the clustered array would have individual scales. I also had to do some math to scale each barmeter to display correct proportions from 0 to 100%. Now I'm stumped on the color of the bar meter. Basically, if the value goes over a setpoint, the bar meter needs to turn red. It has to be in an array to be infinitely scalable.
Thanks
Matt
Solved!
Go to Solution.

You can't do that-
without a little trick.
You could consider laying a custom color box over the bar graph in the cluster you can set the color based on the value of the bar graph or even make a "Pseudo"- bar graph using a series of color boxes stacked to look lie a bar and changing values of the Color boxs from empty to full to red.
Here is an example to demonstrate
Jeff
Attachments:
Pseudo bar.vi ‏12 KB

How can I get my graph to plot vs. my data points instead of vs. time?

how can I get my graph to plot vs. my data points instead of vs. time?

Maybe you could exaplin in a few more words what "my data" is. Are the values equally or randomly spaced?
If they are equally spaced, just adjust offset and multiplier, and axis label.
If they are randomly spaced you are probably looking for an X-Y graph. Check the shipping examples.
LabVIEW Champion . Do more with less code and in less time .

How can I enlarge the graph in a BI JSP Page?

I create a BI JSP Page, the graph is too narrow, so not enough wide. How can I change the sizew of the graph?
Thanks in advance.

Read this:
http://help.apple.com/pages/ipad/2.2/#/tana29e86157

If I chose the wrong folder as defaulf for downloads to go to, how can I change it?

I use download manager. I hit '''yes''' when asked if I wanted to make the folder shown as the default for future downloads of that type. I did not mean to do that. How can I change the default folder?

Hi belladonna82,
You should take a look at the [[Downloads window]] and [[Options window - General panel]] Knowledge Base articles. They will give you all the details you need. Unless you are talking about the default action and not the actual download folder? If so, you should look at [[Options window - Applications panel]].
Hopefully this helps!

How can I change 3D graph Axis captions programmatically?

Similar Messages

Maybe you are looking for