How can I change HTTP port in J2EE

Hi.
I installed Sneak Preview 640 and I want to change HTTP port for J2EE. (default port is 50000)
So, I started config tools and move to dispatcher -> service -> http -> port.
There is port information.
- Custom value : empty
- Default value : (Port:80,SocketQueue:200,AcceptingThreadsCount:10,BindAddress:,Type:http)(Port:443,SocketQueue:200,AcceptingThreadsCount:10,BindAddress:,Type:ssl)
My first question is that default port is "80" in above confirguration. Why we use "50000" ?
Second question is that I changed custom value but It doesn't work. How can I change HTTP port ?
Regards, Arnold.

you can use the "visual administrator" to set your http-port, too:
Dispatcher / Services / HTTP Provider / Ports
kr, achim

Similar Messages

How can I change the port of a running database ?

Hi Friends,
on my laptop there is running a 9i DB with port 1521 and a 10gR2 DB with port 1521 also.
The tnsping on these db's is successfully and
with any tools I get the error : ORA-12505 .
How can I change a port number e.g. of the 10g DB ?
Thanks,
Friedhold

These tools you are talking about, did you configure the tnsnames for them?
If you plan to change the default listening port, you need to modify the listener.ora file under $ORACLE_HOME/network/admin
After 9i, Oracle has service registration
A feature by which the PMON process automatically registers information with a listener. Because this information is registered with the listener, the listener.ora file does not need to be configured with this static information.
You can try to run one listener, see if both instances can register themselves in even they are different versions.

How Can I Change the Ports for WebDAV file shares.

Title says it all. I have another piece of software using port 80 and 443, I'd like to create iOS shares using WebDAV but I can't find anywhere in the GUI to change the port numbers and I can't work out whether I need to do something involving Apache virtual hosts and if so which config files are relevant to the WebDAV server.
Someone must have done this by now, anyone know how its done???!!!!
Thanks in advance.

OK, so I worked out which files to edit and I actually managed to change the Apache/WebDAV ports on a clean 10.8 Server.
By clean I mean I installed 10.8.0, updated to 10.8.3 via the combo updater, then installed the latest version of Server app and configured the services.
Having done that I was able to make the required changes and all is working well. I then replicated the process on my live server but it throws up an error when I try to start up the WebDAV sharing.
This thread outlines the same issue:
https://discussions.apple.com/thread/4199421?start=0&tstart=0
I am getting this exact problem, in that any manual change at all to the 0000_any_443_.conf file will cause WebDAV to fail to start. This is annoying because I need to change that file. Its also annoying because the problem isnt there on my 'clean' server.
I deleted the entire /Library/Server/ folder and the Server.app and reinstalled Server.app from the App Store, recreating the /Library/Server folder from scratch. This cleared out the apache config files which I tried to re-modify, but all the file sharing settings were retained. Does anyone think it would be worth deleting all the sharepoints? Any other ideas?

How can we change default port 8080 of application express

Hi all,
Does anyone know how to change default port 8080 in application express to run on only "80"? I have tried the following link, but when i am trying to run using 80, error is being thrown.
http://www.mypi.ch/?p=33
I have checked that no other thing is running on 80 port. I am using Windows Vista
With Regards,
Sunil Bhatia

I am really a newbie in this application express field.
I have installed oracle application express 3.2 over oracle 10G Database as per steps provided on forum. Can you let me know how can i find which webserver i am using? is there any query which i could run to find this out...thanks for ur help. Do reply soon
With Regards,
Sunil Bhatia

How can I change the port number generated in the returned url?

We have a hardware load balancer listening on port 80 and forwarding requests to weblogic 6.1 sp2 servers on port 8090. The web servers generate urls containing the port number (and ip address of the load balancer). The browser tries to acces the load balancer at port 8090 and fails. So, how can I tell weblogic not to put a port number in the url?
TIA, Reinier

Generated WSDL will use the URL of the incoming
HTTP GET request (request to retrieve wsdl) to create:
service->port->location->address
attribute inside the WSDL.
This attribute is used by the client to send the SOAP
request.
So the HTTP GET request to retrieve the WSDL
should use the address of the load balancer (ie 80).
Then the generated WSDL will also have a url with
port 80.
http://manojc.com
"reinier" <[email protected]> wrote in message
news:3ea95116$[email protected]..
We have a hardware load balancer listening on port 80 and forwardingrequests to weblogic 6.1 sp2 servers on port 8090. The web servers generate
urls containing the port number (and ip address of the load balancer). The
browser tries to acces the load balancer at port 8090 and fails. So, how can
I tell weblogic not to put a port number in the url?
TIA, Reinier

How can I change the "port" the printer uses?

I want to access a Canon LBP3000 printer set as shared on a Windows PC. The Canon driver download does not allow me to find the driver when I try to add it to the shared printer.
However, if I plug the Canon in directly to the Macbook I can install the driver.
Is there a way I can change this "local" printer to point to the Windows PC printer?
In Windows, I would just change the "port" from "USB001" to "\\Windows\Canon".

dougham wrote:
Having connected the printer to the macbook, and added the printer, how can I now tell the macbook that the printer is not attached to a USB port, but is found at \\<windowspc>\<printersharename>? It is a simple problem on a Windows PC to change the port of a printer. Surely it is also possible on a macbook.
It is possible on a Mac but this is not your problem. What Canon told you is wrong. Your problem is not with the Mac but with the Canon driver. The Canon CAPT driver for the LBP-3000 has not been designed to be used when shared from a Windows computer. It expects a direct USB connection to the Mac. The same applies to another proprietary driver called UFR2 for Mac. So no amount of queue changing will resolve your issue.
For the record, to connect to the PC share via Mac, you would normally select to add and then select the Windows icon. This lets you browse the local network, starting at the workgroup level. After selecting the workgroup, then computer, then share name, the URL will look like \\computernamesharename.
In a situation where you need to manually add the address because you cannot browse the network, you can modify the Add Printer toolbar to add the Advanced icon. This is done by Control-clicking on the Add Printer toolbar, selecting Customize Toolbar and dragging the Advanced icon to the toolbar. Then when you click the Advanced icon, a pane appears that lets you select a number of different protocol options, one of which is Windows. Here, in the URL field, after the "smb://" you can enter the computer share name followed by the share name, for example smb://windoze7/myprinter (don't be too concerned that the slashes are the opposite direction).
Pahu

How can I change the port for Adobe Media Player?

After instaling Adobe Media Player I lost my IIS. AMP has hijacked my port 80. Now how could I alter configuration so that AMP will use a different port.
I have many programs configured for Port 80 and I dont want to go and change all of the hardcoded ports in Javascript and CSS files.
http://hodentek.blogspot.com/2009/04/adobe-media-player-internet-information.html
http://hodentek.blogspot.com/2009/04/adobe-media-player-and-iis-part-2.html

These tools you are talking about, did you configure the tnsnames for them?
If you plan to change the default listening port, you need to modify the listener.ora file under $ORACLE_HOME/network/admin
After 9i, Oracle has service registration
A feature by which the PMON process automatically registers information with a listener. Because this information is registered with the listener, the listener.ora file does not need to be configured with this static information.
You can try to run one listener, see if both instances can register themselves in even they are different versions.

How can I change network port configuration default setting?

Hello,
I am having trouble connecting to the internet. When I try to connect, it dials, rings, and then has a long tone, then disconnects. Preferences>Network>Assist Me>Diagnostics>Location>Network Port has Built in Ethernet chosen. I unchoose it, choose Internal Modem. It goes on to try to connect, than asks me if I have DSL or Cable (I don't) I choose no, asks me if there is anything else to restart, no, I choose. It then says to check configuration. I go back till the location page then continue, continue, then it connects. It won't stay selected to Internal Modem. I have checked its box and dragged it to the top (and unchecked and dragged Ethernet to the bottom). This happens 90% of the time but not always. I can connect to the internet, but have to go through this. I don't have Built in Ethernet.
Thanks,
Maria

Open Network preferences. Select Internal Modem from the list and click on the Configure button. Click on the PPP tab. Fill in the required information for your dial up ISP including your username and password (for your dial up account.) Check the box to save your password. Click on the Apply button. Click on the TCP/IP tab and select DHCP from the Configure IPv4 drop down menu, click on the Apply button. Click on the Modem tab and select the modem from the drop down menu that corresponds to the one you are using or have installed internally in your computer. Click on the Apply button. Quit Network preferences. This should have you all set. Use Internet Connect to initiate the dial up.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

How can we change the default port 50000 of SAP WAS?

Hi,
1. How can we change the default port 50000 of SAP WAS?. Can we assign 8080?
2. Can we assign default context ("/") for the application we have developed?
Regards,
Sudheesh

Hi Sudheesh,
just refer this help..
http://help.sap.com/saphelp_nw04/helpdata/en/5b/82d3c3ee9691418e6b0281f933a37d/frameset.htm
U have to restart the sever after changing the port.
One more main thing here , no other services must not be using the port.
It will cause port binding exception.
Regards
Kishor Gopinathan

How can I change the fonts in my address book? I'd like to change them to make fun mailing labels.

How can I change fonts in my address book so I can print clever mailing labels?

Hello, I think you'll have to Export them & use another Application...
How to Export Your Mac OS X Mail Address Book Contacts to a CSV File...
Export Your Mac OS X Mail Address Book Contacts to a CSV File
To save your contacts from the Mac OS X Address Book to a CSV (comma-separated values) file, which lets you import the data to many other address books:
Download and install AB2CSV.
Open AB2CSV.
Select Mode | CSV from the menu.To configure which fields will be exported, you can select AB2CSV | Preferences… from the menu and go to the CSV tab.
Now select File | Export from the menu.
Go to your Documents folder.
Click Choose.
The exported address book contacts are saved to a file called "everyone.csv" in your Documents folder.
http://email.about.com/od/macosxmailtips/qt/How-To-Export-Your-Mac-Os-X-Mail-Add ress-Book-Contacts-To-A-Csv-File.htm
Then again, AB can be imported into...
Might look into NeoOffice...
http://www.neooffice.org/
Or Open Office...
http://porting.openoffice.org/mac/download/index.html
And most likely MS Office.

HT5624 I would like to change ,my password. I signed in but I don't know what was my answer for the 2 security question. How can I change my password?

would like to change ,my password. I signed in but I don't know what was my answer for the 2 security question. How can I change my password?

Hello, dot mac & MobtleMe no longer exist, though it may be possible to still use a dot mac addy... or maybe not if expired.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
    •    Server name: imap.mail.me.com
    •    SSL Required: Yes
    •    Port: 993
    •    Username: [email protected] (use your @me.com address from your iCloud account)
    •    Password: Your iCloud password
SMTP (outgoing mail server) information:
    •    Server name: smtp.mail.me.com
    •    SSL Required: Yes
    •    Port: 587
    •    SMTP Authentication Required: Yes
    •    Username: [email protected] (use your @me.com address from your iCloud account)
    •    Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

How can I change Connection parameters when promoting to Production ???

Hi Everyone !
Do you know how can I change Connection Framework parameters in a Webdynpro Application? The app was deployed in TEST, now I want to move it to Production...
In my application I am using Connection Framework to connecto to a BAPI.
The connection was created using
SAP Connectivity > SAP Enterprise Connector.
I provided connection parameters for a TEST environment (Host name, system number, client, logon name...).
I deployed the application in TEST, but how can I change these parameters prior to promote it to Production? Were and how do I fill the new parameter values?
Many Thanks,
Silvio Hirashiki

Hi Silvio,
AFAIK, you need to provide JCO connection to proxy port type and all connection specific data is there. (http://help.sap.com/saphelp_nw04/helpdata/en/ed/897483ea5011d6b2e800508b6b8a93/frameset.htm). You can use configuration files for this or RFC destination.
You only need to regenerate proxy when interfaces of functional modules are dufferent for TEST and Production.
BTW, why are you using SAP EC instead of adaptive RFC model in WD application?
Best regards, Maksim Rashchynski.

How can I change the SocketFactory at runtime?

I have a question, maybe someone has had a similar problem. I have a client-server application with communication over RMI. The client may, through a dialog box, choose a connection "submethod":
* a simple RMI
* RMI over fixed ports
* RMI over HTTP.
After selection the application registers the proper socket factory with the RMISocketFactory.setSocketFactory(...) method. So, if the user disconnects from the server and tries to reconnect with another "submethod", the application throws the following exception:
java.net.SocketException: factory already definedAPI says "The RMI socket factory can only be set once", so how can I change the connection submethod at runtime?
Regards,
Marek.

You can't.

How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

How can you change your security question for I tunes?

How can you change your security question for I tunes?

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

How can I change HTTP port in J2EE

Similar Messages

Maybe you are looking for