How can i change released BOR business object

Dear Gurus,
I am in the upgrade project. During dev upgrade I made BOR object types to unicode compatible by applying a note 563417. Out of these objects some objects are showing unicode checks are not active in quality system. For that I want to store the above zbusiness objects(released one) in a transport request. How I can do this.
Please help me.
Thanks and regards,
Ravi

Hi,
Once again in dev system create a new request and change the business object and then once again release the new request to quality.
Regards,
Nagaraj

Similar Messages

How can I refer to the PhotoShop Object library dynamically depend on the release of PhotoShop?

Recently, I make a program, now I face a big program:
I make the program by visual basic and photoshop script , but my client have different release of Photoshop, for example : photoshop 7.0 cs and cs2. I know every release of PhotoShop have ist own Object library, but in visual basic 6.0, I can only refer to one PhotoShop Object library. for example: if I refer to Photoshop 8.0 Object library, if my clients release of Photoshop is 7.0. there will be a error message : Run-time error '429 ( cant create object) Run-time error '430(Class does not support Automation or does not support expected interface), How can I refer to the PhotoShop Object library dynamically depend on the release of PhotoShop?
my email is : [email protected] .
any suggestion?

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-and try some steps such as changing browsers and turning off your firewall for downloads

How to change the Workflow Business Objects

Hi,
How to change the Workflow Business Objects. I need to add custom code to the Method. can I create only custom method or I need to copy the existing object to Custom object .
Thanks
Niranjan

Hi,
Check the following link:
http://www.sap-img.com/workflow/sap-workflow.htm
http://www.sapmaterial.com/badi.html
Regards,
bhaskar

I would like to create a new layer NOT AS SMART OBJECT. It is the default. How can I change it?

Hi!
I would like to create a few layers, non of them should be a smart object. But when I create the layer automatically it becomes a smart object. How can I change it?
Thanks!

Hi Roniarbel,
Go to general tab in Preferences and uncheck the option "Always create smart object when placing" Close Photoshop and then reopen it and check.
Thank you for posting on Adobe Forums.

How do I change DNS to Business Catalyst servers. I am having problems can anyone help please?

How do I change DNS to Business Catalyst servers. I am having problems can anyone help please?

What problem are you having?
Have you read this KB? - Domain name and DNS: Quick reference

The phone number and website for my business in iPhone Maps are wrong. How can I change them?

The phone number and website for my business in iPhone Maps are wrong. How can I change them?

SEARCH !!
http://lmgtfy.com/?q=report+a+problem+in+apple+maps

How can i change my membership from private to business because of the taxes?

How can i change my membership from private to business because of the taxes?
When i entered Adobe CC i used it privat, now as a freelancer. but i pay the sales tax. So i need to change my account from private tu business.
Where can i do that?
Best regards,
Dan

Hi Pearl34,
Welcome to the Adobe Forums.
Please, allow me to get in touch with you by email regarding your query.
Thank you.
Arnaud.

HT201320 I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

You are most welcome

How can I change the default "file type" in the open file dialog when using Firefox on certain web pages?

I work for a bankruptcy attorney. We use the Court's file upload to file our documents. When I am on the Court's site and I have to pick a file to upload, the "open file" dialog box pops up. In Firefox, the default "file type" is always "image" files. I need it to be "all files". How can I change this setting?

Two observations.
First — "Tools-> ...." is specific to Acrobat X and XI. It did not exist prior to Acrobat X.
Second — Acrobat 9 Pro / Standard (nor earlier release) does not support viewing a PDF page containing a scanned image and performing a right-click ... Save Image As.
The context menu provided by Acrobat 9 Pro with a right-click on a scanned image is:
The context menu,from a right-click with the TouchUp Object tool selected, for Acrobat 9 Pro is:
So, to paraphrase what Paul Harvey used to say ... What's the rest of the story?
Be well...

How can i change the default text "Query by Example"

Studio Edition Version 11.1.1.3.0
how can i change the default text *"Query by Example"* in a Panel Collection
Thx

Hi thieto,
The label you are looking for is af_panelCollection.LABEL_MENUITEM_QBE*
I'm currently writing a blogpost on this issue. In short, you will have to create a skin resource bundle.
In the skin definition, refer to this bundle class.
<?xml version="1.0" encoding="ISO-8859-1"?>
<skins xmlns="http://myfaces.apache.org/trinidad/skin">
<skin>
    <id>mySkin.desktop</id>
    <family>MySkin</family>
    <extends>blafplus-rich.desktop</extends>
    <render-kit-id>org.apache.myfaces.trinidad.desktop</render-kit-id>
    <style-sheet-name>skins/MySkin.css</style-sheet-name>
    <bundle-name>com.blogspot.lucbors.view.bundles.MySkinBundle </bundle-name>
</skin>
</skins>In this class, adjust the label text to your needs.
package com.blogspot.lucbors.view.bundles;
import java.util.ListResourceBundle;
public class MySkinBundle extends ListResourceBundle {
public MySkinBundle() {
    super();
@Override
public Object[][] getContents() {
    return _CONTENTS;
static private final Object[][] _CONTENTS = {
     {"af_panelCollection.LABEL_MENUITEM_QBE","the text that you want"}
}More in the blogpost
Good luck
Luc Bors
Edited by: lucbors on Jul 26, 2010 11:39 AM (blogpost finished - URL added)

How can I change the default "from" email account on my iPad/iPhone in IOS 8.2?

I currently use my phone & pad for business and personal use. My emails should come from my business account but they're coming from my Yahoo account. How can I change it without having to manually change each email? I've checked online but I don't see settings/mail,contacts,calendars/default account in this new revision of software.
Thanks!

Hi bschmidt0726,
Go to "Setting"; scroll down to the 4th box for "iCloud"; You need to turn on you "Mail" option in the "iCloud" settings.
Then,
Go into "Settings", scroll down to "Mail, Contacts, Calendars"; on the left panel, scroll down to the 4th box; there you'll find the "Default Account" settings.

How can I change my email account name to my alias?

The Verizon email address all my friends, family, and business associates have used for more than 8 years (Jxx Sxxxx) turns out to be an alias. My primary account name seems to be JSxxxx. I recently changed to high speed enhanced and these things happened:
Outlook, where I receive my email, continues to receive all mail addressed to Jxx Sxxxx, just as it always has. If I compose a new email or hit the reply button, my outgoing emails SHOULD show up in the recipient's mailbox as Jxx Sxxxxx. Instead, they appear with the sender name Mxx Sxxxx (the name of my husband, the account owner). I need my own name back in order to get my emails read by business associates and others who don't know who Mxx Sxxxx is.
In addition, only email addressed to JSxxxx comes to my regular Verizon account (accessed at webmail.verizon.net). NO email addressed to Jxx Sxxxx comes to that account, which means that if I am away from my computer I cannot access my email at all.
How can I change my so-called account name to my alias without losing all the emails in my Outlook account? That is, how can I get rid of my primary account name, and substitute my alias?

Verify Account https://forums.adobe.com/thread/1465499 may help
-wrong email https://forums.adobe.com/thread/1446019

How can I change the name of item in TableViewController iOS

How can I change the name of item in TableViewController? I want to be able to change the title of an item if I added one. Code:
// ViewController.m
// Movie List
// Created by Damian on 20/02/15.
// Copyright (c) 2015 Tika Software. All rights reserved.
#import "ViewController.h"
@interface ViewController ()
These outlets to the buttons use a `strong` reference instead of `weak` because we want
to keep the buttons around even if they're not inside a view.
@property (nonatomic, strong) IBOutlet UIBarButtonItem *editButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *cancelButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *deleteButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *addButton;
// A simple array of strings for the data model.
@property (nonatomic, strong) NSMutableArray *dataArray;
@end
#pragma mark -
@implementation ViewController
- (void)viewDidLoad
    [super viewDidLoad];
     This option is also selected in the storyboard. Usually it is better to configure a table view in a xib/storyboard, but we're redundantly configuring this in code to demonstrate how to do that.
    self.tableView.allowsMultipleSelectionDuringEditing = YES;
    // populate the data array with some example objects
    self.dataArray = [NSMutableArray new];
    NSString *itemFormatString = NSLocalizedString(@"Movie %d", @"Format string for item");
    for (unsigned int itemNumber = 1; itemNumber <= 0; itemNumber++)
        NSString *itemName = [NSString stringWithFormat:itemFormatString, itemNumber];
        [self.dataArray addObject:itemName];
    // make our view consistent
    [self updateButtonsToMatchTableState];
#pragma mark - UITableViewDelegate
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
    return self.dataArray.count;
- (void)tableView:(UITableView *)tableView didDeselectRowAtIndexPath:(NSIndexPath *)indexPath
    // Update the delete button's title based on how many items are selected.
    [self updateDeleteButtonTitle];
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
    // Update the delete button's title based on how many items are selected.
    [self updateButtonsToMatchTableState];
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
    // Configure a cell to show the corresponding string from the array.
    static NSString *kCellID = @"cellID";
    UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:kCellID];
    cell.textLabel.text = [self.dataArray objectAtIndex:indexPath.row];
    return cell;
#pragma mark - Action methods
- (IBAction)editAction:(id)sender
    [self.tableView setEditing:YES animated:YES];
    [self updateButtonsToMatchTableState];
- (IBAction)cancelAction:(id)sender
    [self.tableView setEditing:NO animated:YES];
    [self updateButtonsToMatchTableState];
- (void)actionSheet:(UIActionSheet *)actionSheet clickedButtonAtIndex:(NSInteger)buttonIndex
    // The user tapped one of the OK/Cancel buttons.
    if (buttonIndex == 0)
        // Delete what the user selected.
        NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
        BOOL deleteSpecificRows = selectedRows.count > 0;
        if (deleteSpecificRows)
            // Build an NSIndexSet of all the objects to delete, so they can all be removed at once.
            NSMutableIndexSet *indicesOfItemsToDelete = [NSMutableIndexSet new];
            for (NSIndexPath *selectionIndex in selectedRows)
                [indicesOfItemsToDelete addIndex:selectionIndex.row];
            // Delete the objects from our data model.
            [self.dataArray removeObjectsAtIndexes:indicesOfItemsToDelete];
            // Tell the tableView that we deleted the objects
            [self.tableView deleteRowsAtIndexPaths:selectedRows withRowAnimation:UITableViewRowAnimationAutomatic];
        else
            // Delete everything, delete the objects from our data model.
            [self.dataArray removeAllObjects];
            // Tell the tableView that we deleted the objects.
            // Because we are deleting all the rows, just reload the current table section
            [self.tableView reloadSections:[NSIndexSet indexSetWithIndex:0] withRowAnimation:UITableViewRowAnimationAutomatic];
        // Exit editing mode after the deletion.
        [self.tableView setEditing:NO animated:YES];
        [self updateButtonsToMatchTableState];
- (IBAction)deleteAction:(id)sender
    // Open a dialog with just an OK button.
    NSString *actionTitle;
    if (([[self.tableView indexPathsForSelectedRows] count] == 1)) {
        actionTitle = NSLocalizedString(@"Are you sure you want to remove this movie?", @"");
    else
        actionTitle = NSLocalizedString(@"Are you sure you want to remove these movies?", @"");
    NSString *cancelTitle = NSLocalizedString(@"Cancel", @"Cancel title for item removal action");
    NSString *okTitle = NSLocalizedString(@"OK", @"OK title for item removal action");
    UIActionSheet *actionSheet = [[UIActionSheet alloc] initWithTitle:actionTitle
                                                             delegate:self
                                                    cancelButtonTitle:cancelTitle
                                               destructiveButtonTitle:okTitle
                                                    otherButtonTitles:nil];
    actionSheet.actionSheetStyle = UIActionSheetStyleDefault;
    // Show from our table view (pops up in the middle of the table).
    [actionSheet showInView:self.view];
- (IBAction)addAction:(id)sender
    [self.dataArray addObject:@"New Movie"];
    // Tell the tableView about the item that was added.
    NSIndexPath *indexPathOfNewItem = [NSIndexPath indexPathForRowself.dataArray.count - 1) inSection:0];
    [self.tableView insertRowsAtIndexPaths:@[indexPathOfNewItem]
                          withRowAnimation:UITableViewRowAnimationAutomatic];
    // Tell the tableView we have finished adding or removing items.
    [self.tableView endUpdates];
    // Scroll the tableView so the new item is visible
    [self.tableView scrollToRowAtIndexPath:indexPathOfNewItem
                          atScrollPosition:UITableViewScrollPositionBottom
                                  animated:YES];
    // Update the buttons if we need to.
    [self updateButtonsToMatchTableState];
#pragma mark - Updating button state
- (void)updateButtonsToMatchTableState
    if (self.tableView.editing)
        // Show the option to cancel the edit.
        self.navigationItem.rightBarButtonItem = self.cancelButton;
        [self updateDeleteButtonTitle];
        // Show the delete button.
        self.navigationItem.leftBarButtonItem = self.deleteButton;
    else
        // Not in editing mode.
        self.navigationItem.leftBarButtonItem = self.addButton;
        // Show the edit button, but disable the edit button if there's nothing to edit.
        if (self.dataArray.count > 0)
            self.editButton.enabled = YES;
        else
            self.editButton.enabled = NO;
        self.navigationItem.rightBarButtonItem = self.editButton;
- (void)updateDeleteButtonTitle
    // Update the delete button's title, based on how many items are selected
    NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
    BOOL allItemsAreSelected = selectedRows.count == self.dataArray.count;
    BOOL noItemsAreSelected = selectedRows.count == 0;
    if (allItemsAreSelected || noItemsAreSelected)
        self.deleteButton.title = NSLocalizedString(@"Delete All", @"");
    else
        NSString *titleFormatString =
        NSLocalizedString(@"Delete (%d)", @"Title for delete button with placeholder for number");
        self.deleteButton.title = [NSString stringWithFormat:titleFormatString, selectedRows.count];
@end

Hey JB001,
Sounds like you have more going on than just a simple issue with Home Sharing and more dealing with Wi-Fi syncing. Start with the article below and see if that may resolve it.
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
http://support.apple.com/kb/TS4062
If it does not work out, then may I suggest contacting Apple for further assistance to walk you through it or just take that time that you were talking about to sort it out.
Contact Apple Support
https://getsupport.apple.com/GetproductgroupList.action
Regards,
-Norm G.

How can i change the column label text in a alv table display

how can i change the column label text in a alv table display??
A similar kinda of question was posted previuosly where the requirement was the label text was needed and following below code was given as solution :
<i>* declare column, settings, header object
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
DATA: lr_column_header type ref to CL_SALV_WD_COLUMN_HEADER.
get column by specifying column name.
lr_column = lr_column_settings->get_column( 'COLUMN_NAME1' ).
set Header Text as null
lr_column_header = lr_column->get_header( ).
lr_column_header->set_text( ' ' ).</i>
My specific requirement is i have an input field on the screen and i want reflect that value as the column label for one of the column in the alv table. I have used he above code with slight modification in the MODIFYVIEW method of the view since it is a process after input. The component gets activated without any errors but while run time i get an error stating
<i>"The following error text was processed in the system CDV : Access via 'NULL' object reference not possible."</i>
i have checked in debugging and the error occured at the statement :
<i>lr_column = lr_column_settings->get_column( 'CURRENT_YEAR' ).</i>Please can you provide me an alternative for my requirement or correct me if i have done it wrong.
Thanks,
Suri

I found it myself how to do it. The error says that it is not able to find the reference object i.e it is asking us to refer to the table. The following piece of code will solve this problem. Have to implement this in WDDOMODIFYVIEW method of the view. This thing works comrades enjoy...
DATA : lr_cmp_usage TYPE REF TO if_wd_component_usage,
         lr_if_controller TYPE REF TO iwci_salv_wd_table,
         lr_cmdl   TYPE REF TO cl_salv_wd_config_table,
         lr_col    TYPE REF TO cl_salv_wd_column.
DATA : node_year TYPE REF TO if_wd_context_node,
         elem_year TYPE REF TO if_wd_context_element,
         stru_year TYPE if_alv_layout=>element_importing,
         item_year LIKE stru_year-i_current_year,
         lf_string    TYPE char(x),
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_header TYPE REF TO cl_salv_wd_column_header.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
Get the entered value from the input field of the screen
node_year = wd_context->get_child_node( name = 'IMPORTING_NODE' ).
elem_year = node_year->get_element( ).
elem_year->get_attribute(
   EXPORTING
    name = 'IMPORT_NODE-PARAMETER'
   IMPORTING
    value = L_IMPORT_PARAM ).
WRITE L_IMPORT_PARAM TO lf_string.
Get the reference of the table
lr_cmp_usage = wd_this->wd_cpuse_alv( ).
IF lr_cmp_usage->has_active_component( ) IS INITIAL.
    lr_cmp_usage->create_component( ).
ENDIF.
lr_if_controller = wd_this->wd_cpifc_alv( ).
lr_column_settings = lr_if_controller->get_model( ).
get column by specifying column name.
IF lr_column_settings IS BOUND.
    lr_column = lr_column_settings->get_column( 'COLUMN_NAME').
set Header Text as null
    lr_column_header = lr_column->get_header( ).
    lr_column_header->set_text( lf_string ).
endif.

How can i change the color of the text on a button in Roll Over or Click state (Cs5.5)

Hello,
Here is the problematic:
1° How can i change the color of the text on a button in Roll Over or Click state (Cs5.5)
- I've many button in a doc im creating
- the color of the buttons is white with black stoke & black text
- in roll over state i want them to inverse the color coding (the text white & bottom black)
- currently the text becomes invisible as black on black cant be seen (ive stroked it white but that looks ugly)
- i would just like to know if there is a function made for this?
My other questions:
2° Ive a presentation on which Ive created buttons which tigger pop-up animations
- i have 5 buttons which trigger animations
- the viewer can chose to Click on any of the buttons randomly
- the problem is once the animation is open how can it be close... either:
a) by it self after "40" seconds
b) when ther viewer clicks another button
3° Ive created buttons linking pages..
- "go to page xxx"
- when i do a preview and click on the buttons the links dont take me to the right pages
- is that normal? (maybe in preview its suppose to be like that)
4° I would like to intergrate YouTube videos in the presentation so they play inside the docment.. when i tried.. it said the 'link isnt a flash video'
- what should i do?
5° Once i export it into Swf. how how can i visualize it? or put it online?
Thank you for your time.

stlbbl4u wrote:
Hello,
Here is the problematic:
1° How can i change the color of the text on a button in Roll Over or Click state (Cs5.5)
- I've many button in a doc im creating
- the color of the buttons is white with black stoke & black text
- in roll over state i want them to inverse the color coding (the text white & bottom black)
- currently the text becomes invisible as black on black cant be seen (ive stroked it white but that looks ugly)
- i would just like to know if there is a function made for this?
You should setup Object Styles - these can also include Paragarph Styles that can be triggered when the Style is selected.
http://help.adobe.com/en_US/indesign/cs/using/WS5CEDB81A-0011-4dc9-9DE8-AC7AD4C80076a.html
My other questions:
2° Ive a presentation on which Ive created buttons which tigger pop-up animations
- i have 5 buttons which trigger animations
- the viewer can chose to Click on any of the buttons randomly
- the problem is once the animation is open how can it be close... either:
a) by it self after "40" seconds
b) when ther viewer clicks another button
I'm not sure what you mean - I don't do files with Animations
3° Ive created buttons linking pages..- "go to page xxx"
- when i do a preview and click on the buttons the links dont take me to the right pages
- is that normal? (maybe in preview its suppose to be like that)
Does it work properly when you export it to the finished file?
4° I would like to intergrate YouTube videos in the presentation so they play inside the docment.. when i tried.. it said the 'link isnt a flash video'- what should i do?
InDesign won't link directly to youtube videos. I think your best bet would be to use Downloader to download the video and embed them directly in Indesign.
5° Once i export it into Swf. how how can i visualize it? or put it online?
Thank you for your time.
You can look up how to embed a SWF file into your HTML - but it depends what you mean by "online" there's a dozen ways to get a file "online".

How can i change released BOR business object

Similar Messages

Maybe you are looking for