How can I choose data objects which is not displayed

hi.
I want to migrate setup data that like as lookups, value set values, users, responsibilities and so on.
but can not find them in list of data objects.
az_apis table has all of these list. but why can't see them.
'iSetup user's guide' guides that it is possible to migrate them. but i don't know how to do.
plz give me the way.
thanks a lot.

# When we configure webserver, we define a port (in your case 8345).
# If an user connects to the webserver at that port (i.e. 8345), it redirects the request to underlying manage servers of WLS domain, depending on the algorithm and the list mentioned in conf file of webserver (obj.conf)
# now if you have already configured a virtual host, that is listening on 80 port, and your client/user directly hits it, they will get the application running.
it is very similar like ---> if you have two Manage servers MS1 and MS2 running on 7001 and 7002 respectively, and you have webserver configured, the client have two choice. Either directly hit the manage servers or hit the webserver. (Here the obvious question is that client should know the manage server ports and ip)
(I am sorry, iincase I have misunderstood your question, if so could you please re describe the question.)

Similar Messages

  • Can I filter by value which is not displayed in grid columns?

    In excel it is possible to filter by value of measure which is not displayed in the report.
    How can I possibly do this in Performance Point Grid? (in filter by value there I only see the measures in columns).
    Please advise
    Namnami

    I found it is possible to filter by value by changing the MDX in the query tab.
    (I filtered by certain existing value in design, then switched to Query and changed to the measure which is not displayed). I shows up correctly.
    The problem is, once I change the query, I get an error when tring to connect a filter on a grid column:
    "consumer parameter no-longer exists in the consumer webpart"
    The grid looks "frozen"- cannot drill up / down etc.
    How can I filter by value which is not displayed without loosing the ability to attach a filter to the grid?
    Namnami

  • How can I find the profiles which are not in a role

    Hi all,
    how can I find all profiles which are not used in a role. Its important for a security check.

    Hi Stefan,
    you do one thing use the transaction SUIM
    SUIM>>Profile>>By Roles
    give all the role name and execute you will get roles with profiles
    and extract to excel sheet
    to get only profiles
    suim>>profile>>by profile name or text give * and execute
    and extract in excel sheet no compate profile coloumns get the profiles which does not there in any roles
    hope ds helps
    thanks
    kishore

  • How can we find delivery documents which are not goods issued?

    Hi All,
    How can we find delivery documents which are not goods issued?
    Thanks in advance

    hi,
    please check in VL06O.
    there will be plenty of options on the same.
    you are requested togo for push button FOR GOODS ISSUE from there u will go to VL06G only
    your requrient will be satisfied.
    regards,
    balajia
    Edited by: balaji timmampalli achari on Nov 11, 2010 12:39 PM
    Edited by: balaji timmampalli achari on Nov 11, 2010 12:40 PM

  • How can I create a object for a note?

    Hi experts,
        I need to apply the note 501905 but when I try in the SNOTE transacction I receive this error:
    Object REPS Z_MRM_DELETE_PP does not exist; create it
    Diagnosis
    The SAP Note that you want to implement contains changes to an object that does not yet exist in your system.
    SAP Notes contain only changes to objects that already exist. This means that the the system cannot automatically create new objects during the implementation of this SAP Note.
    Procedure
    1. Cancel the SAP Note implementationl.
    2. Create an empty object REPS Z_MRM_DELETE_PP with the corresponding object editor.
    3. Restart the SAP Note implementation.
    How can I create that Object??
    Thanks for the help!

    Hi Carlos,
    It says that you have to create a new program with a name Z_MRM_DELETE_PP.
    Once you create and activate the program you can execute the SAP Note.
    All this processure will be written in the SAP Note.
    Please Go through the Note using below:
    Step1: Use T.code SNOTE.
    Step2: Use menu GOTO --> NOTE BROWSER. Provide the Note no and EXECUTE.
    Step3: Double click on the displayed line.
    Here you will get the information to do before implementing the note.
    Go through all the documentation, and once you did all the development given in the note then you can implement the note.
    Regards,
    Sreekanth.

  • How can i distill the invoice which has not verified?

    hello evryone:
       my problem is I want to distill the invoice which has not 
       verified through the tcode MIRO.
       thanks in advance!

    Hello,
    Have you tried breaking your structure into 255 chunks? I don't know what the structure you are moving from looks like, but you should be able break it back up into the SOLI structure. The end of a line in SOLI doesn't create a Carriage Return/Line Break. You have to insert these yourself like in the following:
    * Create document
          clear mail_line.
          move 'This is a test E-Mail'(d01) to mail_line.
          concatenate mail_line
                      cl_abap_char_utilities=>newline
                      into mail_line.
          append mail_line to l_mailtext.
    What kind of attachment are you wanting to create - a text tab delimited file for reading in a spreadsheet application such as excel? You might try reassembling your data table into a single string with newlines where you need them. Then use function module SCMS_STRING_TO_FTEXT to turn it back into SOLI. This is what I have done in the past. I'm afraid without knowing more about your source structure and attachment type, this is about all I can tell you.
    Vasanth

  • How can I choose the volume which I want to restore by Time Machine? I have two volumes.

    Does anyone know how to restore one of two volumes from Time Machine?
    I have been using SSD and HDD on my MBP.Today, I replaced an old HDD to a new HDD and tried to restore from Time Machine.
    Unfortunately, Migration Assistant couldn't choose which volume I want to restore.
    On Time Machine, I could choose the location, but it was just a copy, not a restore.
    Some files address has been changed, so I have to correct the location for every apps on SSD.
    For example, "/Volumes/Macintosh HD/Users/" has changed to "/Volumes/Macintosh HD//Macintosh HD/Users/"
    I want to make a new HDD be exactlly same as an old HDD, so I don't need to adjust file locations or rename the address.
    Thank you in advance.

    In SCORM-compliant LMSs the "mechanism" for transferring interaction data is via JavaScript variables.  SCORM uses a standard JavaScript API that all compliant LMSs are supposed to understand and interpret correctly.  (I use the words "supposed to" because the reality tends to be that they all interpret the standard a little differently.)
    If this is a "locally developed LMS" then all bets are off.  You should in theory be able to transfer quite a bit of information, but with a home-grown roll-your-own system at the other end, you have no way of knowing how it will handle that information.
    You need to talk to whoever built or is currently in charge of this LMS, hopefully someone with technical knowledge and expertise.  Get them to tell you how much of the SCORM standard is actually supported.  Only then will you know if you can use some more advanced Captivate functionality to pass more scoring information (e.g. interaction data as well as score/pass/fail).
    If your current LMS is truly only able to accept a couple of values, and your customer wants more than this, handball the issue back to them.  They'll either have to upgrade their LMS or revise their requirements.

  • How to have fact and dimension which are not joined in same report

    Hi All,
    suppose we have 2 dimensions and 1 of them is joined to fact but we want to pull both these dimensions along with fact and fact column shows null but we dont want that .how can we have 2nd dimension which is not joined to fact in the same report .Actually i have a column called equipment schedueled time and it can be shown only with equipment dimension but I want to pull both equipment,geography and equipment scheduled time in report if I do it now it shows equipment scheduled time as null because its not joined with geography dimension.I want even if the geography dimension exists it should show the value of equipment scheduled time .
    Can someone please help me.
    Thanks in Advance

    Hi ,
    Can you please tell me what are fact and dimension tables of your requirement.If you want display the data from 2 dims and a fact table ,you have to establish the joins between facts and dimensions.
    mark if helpful/correct...
    thanks,
    prassu

  • Several contacts have the same email address. How can I choose which contact name appears on the address line in Mail?

    Several contacts have the same email address. How can I choose which contact name appears on the address line in Mail?

    you can't really, but you might be able to filter them by message content into folders for each, or color them with tags

  • When sending from a mobile app, how can I choose which of my computers to open the document on?

    I have a laptop and a desktop computer connected to creative cloud. How can I choose which machine to open up a document from my iOS app? I don't want it to open on both overtime I send something from my iOS device.

    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • How can you move the objects from one server to another?

    how can you move the objects from one server to another?

    Hi,
    Collecting objects for Transporting
    1. rsa1->transport connection
    2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
    3. then choose your infocube and 'transfer'
    4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
    5. after objects collection finished, create request
    6. If they are $TMP, then change the package.
    7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
    8. You can check the request in SE09 to confirm.
    Releasing Transport Request  
    Lets say you are transporting from BWD to BWQ
    Step 1: In BWD go to TCode SE10
    Step 2: Find the request and release it (Truck Icon or option can be found by right click on request #)
    Note: First release the child request and then the parent request
    Steps below are to import transport (generally done by basis )
    Step 1: In BWQ go to Tcode STMS
    Step 2: Click on Import queue button
    Step 3: Double Click on the line which says BWQ (or the system into which transport has to be imported)
    Step 4: Click on refresh button
    Step 5: High light the trasnport request and import it (using the truck icon)
    Transport
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
    Hope this helps.
    thanks,
    JituK

  • How can I cache an object for unlimited time or for ever.

    Hi,
    How can I cache an object for ever or unlimited time. What values should be used to in cache-config.xml i.e.
    <expiry-delay system-property="tangosol.coherence.zerostage.expiry.delay">XXXms</expiry-delay>
    <flush-delay system-property="tangosol.coherence.zerostage.flush.delay">XXXms</flush-delay>
    thanks a lot in advance.

    Hi Suhas,
    If you look in the documentation http://download.oracle.com/docs/cd/E14526_01/coh.350/e14509/toc.htm and more specifically here http://download.oracle.com/docs/cd/E14526_01/coh.350/e14509/appcacheelements.htm#BABDHGHJ you will see the explination for the two configuration items you mention.
    The default expiry-delay is zero which means no expiry - that is the data will stay in the cache forever (or until you do a remove). If expiry is zero then flush-delay has a default of zero is used and automatic flushes are disabled.
    JK

  • HT1338 WHAT IS 802.1 MEANING? HOW CAN I CHOOSE ABOUT OPTION INSIDE BETWEEN 802.1WEP OR WPA ENTERPRISE? WHAT'S DIFFERENT? T

    WHAT IS 802.1 MEANING? HOW CAN I CHOOSE ABOUT OPTION INSIDE BETWEEN 802.1WEP OR WPA ENTERPRISE? WHAT'S DIFFERENT?

    802.11 refers to a document that specifies how wireless networking works. It goes into detail about the radio signals, frequencies, signal strengths, encoding of data, etc. From a practical standpoint, the typical person really only care about a couple of things: speed and encryption.
    802.11b - describes networks that transmit 11 mbps using a 2.4 GHz radio frequency
    802.11g - describes networks that transmit 54 mbps using a 2.4 GHz radio frequency
    802.11n - describes networks that transmit up to 600 mbps using 2.4 GHz and 5 GHz frequencies
    n is faster than g which is faster than b. The speed of a network connection is limited to the slowest part (so, if you have an 'n' router, but your laptop only supports 'g', you get the 'g' speed).
    WEP, WPA, and WPA2 refer to data encryption schemes specified in parts of the 802.11 document. With Wi-Fi, you are broadcasting your network activity over a radio, and it's pretty obvious that anyone could eavesdrop on the transmission. By using cryptography, you can scramble the data being passed back and forth so that the sender and receiver still understand the messages sent, but an eavesdropper cannot.
    WEP is a very simple encryption scheme, one that the methods to decrypt the data is pretty straight-forward. It's not effective against someone that wants to intentionally eavesdrop on your activities (or access your computer) because they can use software to determine the password simply enough.
    WPA and WPA2 are improvements over WEP that make cracking the password even more difficult (WPA2 being better than WPA).
    The "enterprise" version of WPA2 refers to a variation on WPA2 that requires special security servers, security certificates, and other complicated systems most likely only applicable to a corporate or military environment. It's impractical for a home or small office.
    To connect to a wireless network, you generally don't have to worry about the encryption used since the computer will receive a notice from the wireless network about how it is setup and use the appropriate method. It's probably good for you to pay attention whether the network you are connecting to is secure or not.
    If you are setting up a network at home using a cable modem or broadband router, or even just a Wi-Fi access point, you want to set it up to use WPA2 unless you have some very old computers that only support WPA. You should avoid using WEP.

  • I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

    i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

    Well I'll guess you're using iPhoto 11:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • How can we append data in existing flat file

    how can we append data to a existing flat file (Text file).

    just fill the itab from data which suppose to append to text file.than read text file from GUI_UPLOAD and loop on itab and with the use of read statements you may append the data.

Maybe you are looking for

  • Kindles in the classroom

    I'm interested in hearing your thoughts about deploying Kindle fire on a K-12 environment, and if you already doing it in your network, how do you manage the devices?   This topic first appeared in the Spiceworks Community

  • Illustrator CC Free Transform and Snapping

    It seems that in CC the Free Transform tool does not snap to grid when resizing (for example) a rectangle. If I have "Snap to Grid" turned on, it only is taking effect with new objects getting drawn. Am I understanding this correctly? If I draw a rec

  • Soundbooth CS4 crashes consistently - can't use!

    I have a new copy of Creative Suite Web Premium CS4. I am trying to use Soundbooth to edit some small WAV files. It will open any file, display the waveform, and then crash. I cannot open ANY files at all! I let the updater look for updates, and appa

  • Need to idiot-proof an iMac with 2 different size printers

    Have an iMac with a Kodak 500 photo printer (ONLY prints on a 4.17in x 7.25in "postcard" size) and laser printer (8.5x11 only) connected (Kodak via USB, Laser via network) ... need to get it to automate the page setup (size) based on the printer sele

  • Wifi is connected but showing limited connectivity

    hi when i connect in my home wifi its connected but its showing limited connectivity i cant access internet from my home wifi but in others wifi its connecting and i can access internet too why please solve my problem thanks