How can I compare two summary field in cross-tab?

Dear expert:I have one question for how can I compare two summary field in cross-tab? I have following cross-table:Type Sector1 Sector2 Sector3 Total Outlook 10 11 9 30 Target 5 3 1 9I want to compare the summary field(total) relationship percent, I want to get "9/30". Someone told me I must create the DB view or table via SQL, then can implete in Crystal Report. Can I implete it in Crystal Report via fomula or other function?Thanks so much for your warm-hearted help!Steven

Hello Steven, yes you can compare summary fields, If you are comparing Summary to Target, or vice versa - you can do it within Crystal Reports.
1. In Suppress conditional formula, create 2 Global variables: CurrentOutlook and CurrentTarger and get the current value.
2. In Display String formula for Total show ToText(CurrentTarget/CurrentOUtlook) + "%".
For more difficult cases of compariing fields in cross--tab, you may look into http://www.relasoft.net/KB10001.html.
Best,
Alexander

Similar Messages

How can i compare the character fields?

I have a requirement to compare the character fields .
I have to compare the 2 character fields of a table CDPOS
As follows .
If CDPOS-VALUE-OLD GT CDPOS-VALUE-NEW
      Populate    REDATED = YES.
ELSE
      Populate REDATED = NO.
My doubt here is how can we compare the character fields.?
   When I do Extended Program Check: I am getting error like this ?
Greater than/less than comparisons with character type operands may not be portable
Please give me idea .
Thanks ,
Suresh Kumar.

Hi suresh,
DATA : a TYPE char10 VALUE 'DBCD',
       b TYPE char10 VALUE '4234',
       c TYPE char10 VALUE '3456',
       d TYPE char10 VALUE 'ADA',
       e TYPE char10 VALUE '234567'.
IF b GT c.        "this case checks for numeric values
WRITE :/ 'B is bigger'.
ELSE.
WRITE :/ 'C is bigger'.
ENDIF.
IF a GT d.      "this case checks for alphbetical order
WRITE :/ 'A is bigger'.
ELSE.
WRITE :/ 'D is bigger'.
ENDIF.
IF strlen( a ) GT strlen( d ). "this case checks for no of chars
WRITE :/ 'A is bigger'.
ELSE.
WRITE :/ 'D is bigger'.
ENDIF.
IF a GT c.      "this case first alph then numerics
WRITE :/ 'A is bigger'.
ELSE.
WRITE :/ 'D is bigger'.
ENDIF.

How can I avoid the null values in cross tab?

How can I avoid the null values in cross tab?

Hello Anindita,
Let me explain you the problem in detail.
I have selected User and Program as rows in the cross tab. In Summarized Field I am counting the Programs.
In DB I can have both User and Program null.
Letu2019s take these scenarios...
1) For a User, Program can be null
2) For a Program, User can be null
3) And both can be null.
A null Program does not give problem since Cross tab does not count the null values and in my case too, it remove the Program which are null from the Cross tab because of the counting its doing on Program. Hence scenario 1 and 3 is not a Problem.
Problem comes in scenario 2 (For a Program, User can be null).
In this case since Program is not null it will get counted and will be grouped under null user but I donu2019t want to show the null user Grouping in my cross tab.
"Suppress empty rows" and "suppress empty colums" does not help.
Thanks & Regards,
Amrita

How can I compare two periods in a report based on parameters

Hi all,
I'm wondering how can I create a matrix report which compares the sales of two periods. These periods are variable and coming from the parameter section that the user is using. For example, I have got the following table "Sales". Columns are:
ID (not visible in report, can be used to lookup)
Country
Customer
Year
Quarter
Month
Gross sales
The output that I would like to get is the following
Parameter period 1: 2013 Q1
Parameter period 2: 2013 Q3
The report should look something like this:
2013 Q1
2013 Q3
USA Microsoft 50000 75000
So in the third column you'll see the sales based on parameter period 1, and the fourth column shows the sales based on parameter period 2.
Thanks for the help!

Just to be sure I understand...
You have 1 primary dataset that returns records that will be displayed in a tablix in your report. The data will include sales information records from various years, quarters, etc. You want your report user to be able to select 2 sets of data for comparison
based on quarter. Is this correct?
To do this, start by adding a Matrix to the report. Set the Column Group to group on the expression:
=CStr(Fields!Year.Value)+" "+Fields!Quarter.Value
Set this same formula as the group header. Now Set the existing Row Group to group on Customer. Add a parent group above this Row Group and group on Country. In the detail cell set the value to:
=Sum(Fields!GrossSales.Value)
You will also need to access the tablix properties and set a filter as follows:
Expression: =CStr(Fields!Year.Value)+" "+Fields!Quarter.Value
Operator: In
Value: @Quarters
For this filter to work, you will need to create the @Quarters parameter as follows:
On General tab:
Name - Quarters
Prompt - Select Quarters to Compare
Data type - Text
Allow multiple values - Checked
Visible - Selected
Available Values:
Get values from query - Selected
Dataset - dsQuarters
Value field - YearQuarter
Label field - YearQuarter
Default Values:
No default value - Selected
Advanced: Leave at default settings
For the parameter to work you need to create the dsQuarters dataset. This dataset needs to return a single column of distinct values for Year + " " + Quarter based on the same query that you use for your primary dataset. Add the distinct keyword (if using
TSql) or equivelent and eliminate all of the unnecessary columns. Set it to return Year + " " + Quarter AS YearQuarter.
Let me know if you have questions or if I missed something.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

How can I compare two collections at the same time? (View two grid views)

I have two collections containing some of the same images. (My Nikon D70 did not put an end-of-file on some images. I recovered them into a different collection.) Now I want to display both collections side-by-side in grid view. I will select those images in the "recovered" collection that correspond to the bad images in the "main" collection, add the ratings etc, and move just these to another collection.
It is extremely frustrating to have to bounce back and forth between collections, remembering each image one by one and selecting it in the "recovered" collection. (The image names are not preserved in the "recovered" collection -- I have to go by what the image looks like.)
LightRoom allows me to compare photos in the compare view. I want to compare collections in two grid views.

CaptureTheLight,
you have ran into a situation when you have to compare two sets of images and now you're wondering how come Lightroom doesn't have such "obviously necessary" functionality? But you have to admit it, this is not such a common situation in a photographer's workflow recovers broken files and tries to compare them against themselves. I think it's a pretty specific feature you need. Still, Lightroom has enough powerful tools for editing and sorting images.
For example...
You could just put them all - "main" and "recovered" - into a single collection or into the Quick Collection. Label the entire "recovered" collection with, say, red and sort by capture time. Now you'll have everything side by side, ordered chronologically. The "recovered" images will stay next to the "main" images since their capture time will be the same, and they will also stand out since they have the red label.
Make the thumbnails bigger and set up the grid view so it tints the thumbnail cell are tinted with the label color. Now, you can go quickly through them visually checking labeled vs unlabeled.

How can i compare two databases and their tables

i have a text.txt file then
i will insert it into db_header and db_details
db_header has tbl_pcountheader with fld_Rack_No(char) PK and fld_DateAdded(date) PK
db_details has tbl_pcountdetails with fld_Rack_No(char) PK, fld_Barcode(char) PK and fld_Quantity(int)
then i will lookup in db_products
db_products has tbl_products and tbl_barcodes
tbl_products has fld_ItemCode
tbl_barcodes has fld_Barcode and fld_ItemCode
now i want to make a prompt contains
Rack No: Date:
Counter No:
Barcode | Item Code | Item Description | Quantity
how can i fill up this by comparing db_details and db_products?
Private Sub bt_upload_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles bt_upload.Click
If saveCheckBox.Checked = False Then
MsgBox("Please click the box to continue.")
Return
End If
If lb_file.SelectedItem Is Nothing Then
MessageBox.Show("Please select a file.")
Exit Sub
End If
' Obtain the file path from the list box selection.
Dim filePath = lb_file.SelectedItem.ToString
' Verify that the file was not removed since the Browse button was clicked.
If System.IO.File.Exists(filePath) = False Then
MessageBox.Show("File Not Found: " & filePath)
Exit Sub
End If
' Obtain file information in a string.
Dim fileInfoText As String = GetTextForOutput(filePath)
'LookUP db_header, db_details and db_products
Dim cs As String = "Database=;Data Source=localhost;" _
& "User Id=root;Password=1234"
Dim conn As New MySqlConnection(cs)
Dim ds As New DataSet
Dim da As New MySqlDataAdapter
Dim cmd As New MySqlCommand
Dim dt As New DataTable
Dim stm As String = "SELECT tbl_pcountheader.fld_Rack_No, tbl_pcountheader.fld_DateAdded, tbl_pcountdetails.fld_Barcode, tbl_products.fld_ItemCode, tbl_products.fld_ItemDesc, tbl_pcountdetails.fld_Quantity FROM db_header.tbl_pcountheader INNER JOIN db_details.tbl_pcountdetails ON db_details.tbl_pcountdetails.fld_Rack_No = db_header.tbl_pcountheader.fld_Rack_No INNER JOIN db_products.tbl_barcodes ON db_details.tbl_pcountdetails.fld_Barcode = db_products.tbl_barcodes.fld_Barcode INNER JOIN db_products.tbl_products ON db_products.tbl_barcodes.fld_ItemCode_fk = db_products.tbl_products.fld_ItemCode GROUP BY tbl_pcountheader.fld_Rack_No, tbl_pcountheader.fld_DateAdded ORDER BY tbl_pcountheader.fld_Rack_No"
ds = New DataSet
Try
conn.Open()
da = New MySqlDataAdapter(stm, conn)
da.Fill(ds, "tbl_pcountheader")
DataGridView1.DataSource = ds.Tables("tbl_pcountheader")
Dim headers = (From header As DataGridViewColumn In DataGridView1.Columns.Cast(Of DataGridViewColumn)() _
Select header.HeaderText).ToArray
Dim rows = From row As DataGridViewRow In DataGridView1.Rows.Cast(Of DataGridViewRow)() _
Where Not row.IsNewRow _
Select Array.ConvertAll(row.Cells.Cast(Of DataGridViewCell).ToArray, Function(c) If(c.Value IsNot Nothing, c.Value.ToString, ""))
Using sw As New IO.StreamWriter("c:\report.txt", append:=True)
sw.WriteLine(String.Join(",", headers))
For Each r In rows
sw.WriteLine(String.Join(",", r))
Next
End Using
ds.WriteXmlSchema("Sample.xml")
Dim cr As New CrystalReport1()
cr.SetDataSource(ds)
CrystalReportviewer1.ReportSource = cr
CrystalReportviewer1.Refresh()
Catch ex As MySqlException
MsgBox("Error: " & ex.ToString())
Finally
conn.Close()
End Try
' Show the file information.
Dim PrintPrompt As String
PrintPrompt = MsgBox(fileInfoText, MsgBoxStyle.YesNo, "ProofList")
If PrintPrompt = vbYes Then
'fileInfoText.print()
If saveCheckBox.Checked = True Then
' Place the log file in the same folder as the examined file.
Dim bakFolder As String = System.IO.Path.GetDirectoryName(filePath)
Dim bakFilePath = System.IO.Path.Combine(bakFolder, "back-up.bak")
Dim bakText As String = "Backed-Up: " & Date.Now.ToString & vbCrLf & fileInfoText & vbCrLf & vbCrLf
' Append text to the log file.
'System.IO.File.AppendAllText(bakFilePath, bakText)
My.Computer.FileSystem.WriteAllText(bakFilePath, bakText, append:=True)
'My.Computer.Network.UploadFile(bakFilePath, "C:\Documents and Settings\SAPC-TECH\My Documents\back-up file.bak", "", "", False, 1000)
'My.Computer.FileSystem.DeleteFile(bakFilePath)
'Form2.Show()
End If
'Note: This message box shows that you've uploaded a file and back up it.
MessageBox.Show("Already backed-up to ")
Else
'Me.Close()
'Application.Exit()
'End
End If
'Me.DialogResult = System.Windows.Forms.DialogResult.Cancel
'Form2.Close()
'Me.Close()
End Sub
here's my final code that solves my problem.
i just make the environment of vb into mysql console
so that i can call all the database that i wanted.

Private Sub bt_upload_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles bt_upload.Click
If saveCheckBox.Checked = False Then
MsgBox("Please click the box to continue.")
Return
End If
If lb_file.SelectedItem Is Nothing Then
MessageBox.Show("Please select a file.")
Exit Sub
End If
' Obtain the file path from the list box selection.
Dim filePath = lb_file.SelectedItem.ToString
' Verify that the file was not removed since the Browse button was clicked.
If System.IO.File.Exists(filePath) = False Then
MessageBox.Show("File Not Found: " & filePath)
Exit Sub
End If
' Obtain file information in a string.
Dim fileInfoText As String = GetTextForOutput(filePath)
'LookUP comparison db_details to db_products
'Dim connString As String = "Database=db_products;Data Source=localhost;" & "User Id=root;Password=1234"
'Dim conn As New MySqlConnection(connString)
'Dim cmd As New MySqlCommand()
'Try
' conn.Open()
' cmd.Connection = conn
' cmd.CommandText = "SELECT Database1.dbo.TableName.ColumnName, Database2TableName.Name, 'The reason why Database 2 isnt defined is the fact that it has been defined in the connection" _
' FROM Database2TableName INNER JOIN _
' Database2TableName2 INNER JOIN _
' WHERE (Database1.dbo.TableName.ColumnName = '')"
' cmd.Prepare()
' cmd.ExecuteNonQuery()
' conn.Close()
'Catch ex As Exception
'End Try
' Show the file information.
Dim PrintPrompt As String
PrintPrompt = MsgBox(fileInfoText, MsgBoxStyle.YesNo, "ProofList")
If PrintPrompt = vbYes Then
'fileInfoText.print()
If saveCheckBox.Checked = True Then
' Place the log file in the same folder as the examined file.
Dim bakFolder As String = System.IO.Path.GetDirectoryName(filePath)
Dim bakFilePath = System.IO.Path.Combine(bakFolder, "back-up.bak")
Dim bakText As String = "Backed-Up: " & Date.Now.ToString & vbCrLf & fileInfoText & vbCrLf & vbCrLf
' Append text to the log file.
'System.IO.File.AppendAllText(bakFilePath, bakText)
My.Computer.FileSystem.WriteAllText(bakFilePath, bakText, append:=True)
'My.Computer.Network.UploadFile(bakFilePath, "C:\Documents and Settings\SAPC-TECH\My Documents\back-up file.bak", "", "", False, 1000)
'My.Computer.FileSystem.DeleteFile(bakFilePath)
Form2.Show()
End If
'Note: This message box shows that you've uploaded a file and back up it.
MessageBox.Show("Already backed-up to ")
Else
Me.Close()
Application.Exit()
End
End If
Me.DialogResult = System.Windows.Forms.DialogResult.Cancel
Form2.Close()
Me.Close()
End Sub
here's my code wherein i have to compare the two database and save it into .txt file
i just have to get this items
Rack No:
Date:
Counter No:
Barcode:
Item Code:
Item Description:
Quantity:
as a prooflist to be print out.

How can i compare two color images in vision builder for AI?

What i want to do is to compare two images. I have a base color image that represents the desired colors and tones. I have another image to be compared to the base image. What i want to do is to compare this two images to know how close they are regarding contents of color and tones. In other words, i want to know how close is image 2 to image 1 (base sample)....
I would like to know how to get the content of certain colors in an image and then compare this values with the same values from another image.
For example..i have two sheets of paper that contain various mixed colors...i want to know the amount of green, red an blue in each image and then comapre this values.
What i want to do is to compare difer
ent samples of fabrics. this fabrics must be of a specified color...but due to the process they may vary in tone or even color...so i want to compare this fabrics to a amster sample to see how close they are in color and tone..
Anything would help since i dont have experience in this type of comparisons...thanks

VBAI allows you to work with grayscale images only. You can acquire an image, use the vision assistant to convert it grayscale by extracting the luminance plane (or any of the other color planes) and then analyze the resulting grayscale image. To do what you are talking about, though, it would really be better to get Vision for labview. You could then take color images, compare color plains, use statistical functions to determine average color values, and so on.

How can i compare two excel files with different no. of records.

Hi
I am on to a small project that involves us to compare two excel files. i am able to do it but am struck up at a point. When i compare 2 different .csv files with different no. of lines i am only able to compare upto a point till when the number of lines is same in both the files.
Eg. if source file has 8 lines and target file has 12 lines. The difference is displayed only till 8 lines and the remaining 4 lines in source lines are not shown.
Can you help me in displaying those extra 4 lines in source file. I am attaching my code snippet below..
while (((strLine = br.readLine()) != null) && ((strLine1 = br1.readLine())) != null)
 String delims = "[;,\t,,,|]";
 String[] tokens = strLine.split(delims);
 String[] tokens1 = strLine1.split(delims);
 if (tokens.length > tokens1.length)
 for (int i = 0; i < tokens.length; i++) {
 try {
 if (!tokens.equals(tokens1[i])) {
System.out.println(tokens[i] + "<----->" + tokens1[i]);
out.write(sno + " \t" + lineNo1 + " \t\t" + tokens[i] + "\t\t\t\t" + tokens1[i]);
out.println();
sno++;
} catch (Exception exception)
out.write(sno + " \t" + lineNo1 + " \t\t" + tokens[i] + "\t\t\t\t" + "");
out.println();
Thanks & Regards

A CSV file is not an Excel file.
But apart from that your logic makes no sense.
If the 2 files are of different sizes the files are different by definition, so further comparison isn't needed, you're done.
If you want to compare individual records, you need to compare all records from one file with all records from the other, unless the order of records is important in which case your current system might work.
That system however is overly complicated for comparing CSV files.
As you assume a single record per line, and if one can assume those records to have identical layout (so no leading or trailing whitespace in or between columns in one file that's not in the other) comparing records is simply a matter of comparing the entire lines.

How can i compare two XML files storeds in a LONG column

Hi,
I need to compare two xml files. My xmls are stored in two table like this:
Table 1
ID_COL number(5);
XML1 LONG()
Table 2
ID_COL number(5);
XML2 LONG()
I need compare the values of the tags of this xmls files e to list de differences.
Tks,
Fernando.

yes odie you are right...i think that my xml is wrong...
I would like to compare every element/attribute...
Bellow is another xml...this is ok....tks
<?xml version="1.0" encoding="UTF-8" ?>
- <nfeProc xmlns="http://www.portalfiscal.inf.br/nfe" versao="2.00">
- <NFe xmlns="http://www.portalfiscal.inf.br/nfe">
- <infNFe Id="NFe31121059106377000172550010003957681605366269" versao="2.00">
+ <ide>
<cUF>31</cUF>
<cNF>60536626</cNF>
<natOp>VDAS PROD ESTABELECIMENT</natOp>
<indPag>1</indPag>
<mod>55</mod>
<serie>1</serie>
<nNF>395768</nNF>
<dEmi>2012-10-03</dEmi>
<dSaiEnt>2012-10-03</dSaiEnt>
<hSaiEnt>18:30:00</hSaiEnt>
<tpNF>1</tpNF>
<cMunFG>3159605</cMunFG>
<tpImp>1</tpImp>
<tpEmis>1</tpEmis>
<cDV>9</cDV>
<tpAmb>1</tpAmb>
<finNFe>1</finNFe>
<procEmi>0</procEmi>
<verProc>1.0</verProc>
</ide>
+ <emit>
<CNPJ>59106377000172</CNPJ>
<xNome>METAGAL IND E COM LTDA</xNome>
<xFant>METAGAL INDUSTRIA E COMERCIO LTDA</xFant>
- <enderEmit>
<xLgr>ROD BR 459</xLgr>
<nro>333</nro>
<xCpl>KM 121</xCpl>
<xBairro>DISTRITO INDUSTRIAL</xBairro>
<cMun>3159605</cMun>
<xMun>SANTA RITA DO SAPUCAI</xMun>
<UF>MG</UF>
<CEP>37540000</CEP>
<cPais>1058</cPais>
<xPais>BRASIL</xPais>
<fone>3534719100</fone>
</enderEmit>
<IE>5969141300009</IE>
<IM>01183</IM>
<CNAE>2949299</CNAE>
<CRT>3</CRT>
</emit>
+ <dest>
<CNPJ>59275792000150</CNPJ>
<xNome>GENERAL MOTORS DO BRASIL LTDA</xNome>
- <enderDest>
<xLgr>AV GOIAS</xLgr>
<nro>1805</nro>
<xBairro>BARCELONA</xBairro>
<cMun>3548807</cMun>
<xMun>SAO CAETANO DO SUL</xMun>
<UF>SP</UF>
<CEP>09501970</CEP>
<cPais>1058</cPais>
<xPais>BRASIL</xPais>
</enderDest>
<IE>636003724112</IE>
<email>[email protected]</email>
</dest>
- <det nItem="1">
+ <prod>
<cProd>XM20C9500PPR</cProd>
<cEAN />
<xProd>ESPELHO RETROVISOR EXTERNO</xProd>
<NCM>70091000</NCM>
<CFOP>6501</CFOP>
<uCom>PC</uCom>
<qCom>80.0000</qCom>
<vUnCom>35.8700000000</vUnCom>
<vProd>2869.60</vProd>
<cEANTrib />
<uTrib>PC</uTrib>
<qTrib>80.0000</qTrib>
<vUnTrib>35.8700000000</vUnTrib>
<indTot>1</indTot>
<xPed>XRW001RV</xPed>
<nItemPed>000001</nItemPed>
</prod>
- <imposto>
- <ICMS>
- <ICMS00>
<orig>0</orig>
<CST>00</CST>
<modBC>3</modBC>
<vBC>2869.60</vBC>
<pICMS>12.00</pICMS>
<vICMS>344.35</vICMS>
</ICMS00>
</ICMS>
- <IPI>
<CNPJProd>00000000000000</CNPJProd>
<cEnq>0</cEnq>
- <IPINT>
<CST>54</CST>
</IPINT>
</IPI>
- <II>
<vBC>0.00</vBC>
<vDespAdu>0.00</vDespAdu>
<vII>0.00</vII>
<vIOF>0.00</vIOF>
</II>
- <PIS>
- <PISNT>
<CST>08</CST>
</PISNT>
</PIS>
- <COFINS>
- <COFINSNT>
<CST>08</CST>
</COFINSNT>
</COFINS>
</imposto>
<infAdProd>PC.93378954-COMPL.PED.XRW001RV</infAdProd>
</det>
+ <total>
- <ICMSTot>
<vBC>2869.60</vBC>
<vICMS>344.35</vICMS>
<vBCST>0.00</vBCST>
<vST>0.00</vST>
<vProd>2869.60</vProd>
<vFrete>0.00</vFrete>
<vSeg>0.00</vSeg>
<vDesc>0.00</vDesc>
<vII>0.00</vII>
<vIPI>0.00</vIPI>
<vPIS>0.00</vPIS>
<vCOFINS>0.00</vCOFINS>
<vOutro>0.00</vOutro>
<vNF>2869.60</vNF>
</ICMSTot>
<retTrib />
</total>
+ <transp>
<modFrete>0</modFrete>
- <transporta>
<CNPJ>00980331000488</CNPJ>
<xNome>THALE TRANSPORTES E LOG. LTDA</xNome>
<IE>5963866160070</IE>
<xEnder>ROD BR 459-KM 121 - DIST INDL, S/N</xEnder>
<xMun>SANTA RITA DO SAPUCAI</xMun>
<UF>MG</UF>
</transporta>
- <veicTransp>
<placa>DPF8048</placa>
<UF>SP</UF>
</veicTransp>
- <vol>
<qVol>20</qVol>
<esp>OUTROS</esp>
<pesoL>64.000</pesoL>
<pesoB>104.000</pesoB>
</vol>
</transp>
+ <cobr>
- <fat>
<nFat>000000395768</nFat>
<vOrig>2869.60</vOrig>
</fat>
- <dup>
<nDup>1</nDup>
<dVenc>2012-11-20</dVenc>
<vDup>2869.60</vDup>
</dup>
</cobr>
- <infAdic>
<infCpl>VIA DE TRANSPORTE RODOVIARIA CODIGO : 108061 PEDIDO NRO : ACIMA FABRICA :72480 REDESPACHO ATRAVES DE VELOCE LOGISTICA S/A ESTRADA DOS ALVARENGAS SAO BERNARDO CAMPO ASSUNCAO SP CNPJ : 10.299.567/0003-26 IE : 635.600.028.11 IPI - IMUNE CFE.ART.18, INCISO II, DO RIPI - DECRETO No.7.212/2010. REMESSA COM FIM ESPECIFICO DE EXPORTACAOMERC.A SER EXPORT.P/GENERAL MOTORS DO BRASIL LTDA.DECEX=3-0322/10-0007 ESTOCA-GEM TEMPORARIA NA VELOCE LOGISTICA S.A. ESTR.ALVARENGAS,4018 B.ASSUNCAO S.B.C. CNPJ10.299.567/0003-26IE.635.600.028.110 FT NR.431.183 ROMANEIO :131.588</infCpl>
</infAdic>
</infNFe>
+ <Signature xmlns="http://www.w3.org/2000/09/xmldsig#">
- <SignedInfo>
<CanonicalizationMethod Algorithm="http://www.w3.org/TR/2001/REC-xml-c14n-20010315" />
<SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1" />
- <Reference URI="#NFe31121059106377000172550010003957681605366269">
- <Transforms>
<Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature" />
<Transform Algorithm="http://www.w3.org/TR/2001/REC-xml-c14n-20010315" />
</Transforms>
<DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1" />
<DigestValue>jN2ozPH3/GvAS8Q5lh/t9bzuXCw=</DigestValue>
</Reference>
</SignedInfo>
<SignatureValue>GAXPLvMCtIYdwMxXDcyL0kr5hCDPCFw8/uNYHFcdTMqBhLgIcEtzHRf8qioWlUVSHNf5jnCLKGjhDV4bEJqkcBhWsKouMzojQ+Z6hkFQAWNuJfPIzutmtRy3AePc5tHK0lI3tF3ws9memboJ8sW21IOWHB6eB0jK2gmhcOlDejc=</SignatureValue>
- <KeyInfo>
- <X509Data>
<X509Certificate>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</X509Certificate>
</X509Data>
</KeyInfo>
</Signature>
</NFe>
- <protNFe versao="2.00">
- <infProt>
<tpAmb>1</tpAmb>
<verAplic>13_0_32</verAplic>
<chNFe>31121059106377000172550010003957681605366269</chNFe>
<dhRecbto>2012-10-03T17:35:55</dhRecbto>
<nProt>131120853536488</nProt>
<digVal>jN2ozPH3/GvAS8Q5lh/t9bzuXCw=</digVal>
<cStat>100</cStat>
<xMotivo>Autorizado o uso da NF-e</xMotivo>
</infProt>
</protNFe>
</nfeProc>

How can i compare two rows

hi all,
In my report there is a table with 3 rows. I have to put a direction image at 4th row based on the difference of 2nd and 3rd row.
can anyone help me?
Thanks in advance.

Hi Tanjima,
In what way you want ot compute the difference between the 2nd and 3rd rows of data?
It would be of great helps if you paste the report data here and Explain what you want in your rows?
You can't refer indivisual cell or individual row in WEBI everything you want to do you have to do it using column references.
Thanks..
Pratik

Comparing two rows field by field through a loop

Hi all,
I've got a tricky issue:
There are two tables (almost) identically designed;
In the first one there are lets say some new data and in the 2nd one there is data to be hold & adjusted;
I built up a third table, which contains the meta informations about the two other tables (i.e. it describes the tables, so for each field of these tables, there is the field name, field type, primary key marker, etc.);
The challenge now is, how can I compare two rows (of the same primary key) field by field and get out the differences (and adjusting the target table row) using PL/SQL procedures/functions.
I thought a create a cursor over the 3rd table and call functions to get the fields out (given by the field name of the cursor), compare the two fields and return if it's equal or different...
As I've seen, there is now direct way to replace a field name in a statement - but how to resolve this with a cool workaround?
In addition, there are about 120 pairs of such tables, to be compared in the same way - so I decided to prevent creating hard coded design for the software.
Even the selection of a pair of rows from the two tables should be parameterized, 'cause the primary keys are of course different in the 120 table pairs.
Any hints or suggestions?
Thanks in advance & regards,
Peter

Hi Peter,
I am very far from being an expert in Oracle but, everything I've read so far strongly suggests that PL/SQL is often the fastest among the customized solutions (beating even compiled C code). The reason - from what I've understood - is that PL/SQL is part of the Oracle kernel/engine, other languages simply aren't.
I suggest you do your own research to confirm what I've just said above.
On a completely different note, when I first read your post, I started writing a reply and decided to discard it because, I figured you probably would find it too far off your original thoughts. However, then you wrote:
>
There are some reasons to prevent hard coding, but it may be possible to generate the PL/SQL-code for each pair of tables by an external program.
>
This is exactly what I was mentioning in the post I ended up discarding. The basic step by step process I was going to mention is as follows:
STEP 1: If possible, write one PL/SQL program that does the job properly for one set of tables. Test it thoroughly and identify potential differences in the process if it had to be applied against other tables. Make it as generic as reasonably possible, that is, keeping the code as simple as possible.
STEP 2: turn the working code of step 1 into a template (usually replacing table names, columns, etc by some token that would not be a valid name).
STEP 3: generate a list of the tables and their corresponding columns you need to process. This list may need to be massaged a little to become the generating seed of 120 programs (or so based on what you've said).
STEP 4: if you don't know Perl or AWK then (don't be alarmed...) download AWK (not Perl) and learn it... you can learn the thing in a couple days (maybe even less). It is a very simple and straightforward text processing language, I know non progammers that learned enough in one day to do useful things with it. Using AWK you can easily generate the 120 programs you need from a working template in very little time (a few hours after you've become proficient). By the way, there is AWK, GAWK, NAWK, all pretty much the same thing and all free. The standard manual for AWK is the one written by the authors Aho, Weinberger and Kernigan, about 100 small pages, it's an easy read and no programmer should be without it :) (better than American Express!)
What you've described sounds just like the thing to use AWK for. I once used AWK to generate 27,000 (that's 27 thousand) lines of COBOL code, debugged and fully tested in 2 days! (testing was automated using AWK too!) It would have taken much longer to just type all that code.
Anyway, I hope that gives you something to think about and be of some help.
John.

How can I compare more than two VIs at a same time in labview 2009

How can I compare more than two VIs at the same time. I am an Lab Engineer I have to check assignments submitted by students and I want to know how many of them are copied from each other. Labview compare VI can only compare two VI at a time while I want to check about 30 VIs at same time.
Regards,

I'm not aware of a tool to compare multiple VIs. If you don't find anything, consider posting this to the LabVIEW Idea Exchange to expose this idea directly to NI R&D.
Thanks!
- Greg J

How can i compare the contents of two folders ?

how can i compare the contents of two folders and find out which files are in one but not in the other?? Knowing how to do this would be the best thing ever, especially when dealing with a large number of files. Often, for instance, I'm dealing with a large number of images, processing them, and saving the retouched ones to a new folder, and need to check that they are all there. If there are say three files missing in the second folder (out of say a hundred in total) being able to automate the process of elimination would be very useful. Please help!!!
B

I really wish I knew the answer to this. I work between two macs, a G5 and MacBook Pro when I'm on the go. Each time I move from one to the other I have to copy all my files to the computer I'm going to work on, so I end up with the same files being duplicated. It's not a problem if it's not much data but in my case the it can be to 30GB, mostly graphics files, photoshop, motion, final cut pro, etc.
There's has got to be a way automator can make a comparison between two folders to sort out what's changed and what's remained the same. It would be nice also if this feature could be done globally on the hard disk using spotlight's technology to stop files being duplicated in places you didn't even know about and taking up valuable disk space. I'm not sure how this could be done.
Any bright ideas Apple?

How can I get the "text" field from the actionEvent.getSource() ?

I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
 public static void main( String[] args ) {
 JFrame f = new JFrame("JFrame");
 f.setSize( 500, 500 );
 ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
 buttonsArr.add( new JButton( "first" ) );
 buttonsArr.add( new JButton( "second" ) );
 buttonsArr.add( new JButton( "third" ) );
 MyListener myListener = new MyListener();
 ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
 ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
 ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
 JPanel panel = new JPanel();
 panel.add( buttonsArr.get( 0 ) );
 panel.add( buttonsArr.get( 1 ) );
 panel.add( buttonsArr.get( 2 ) );
 f.getContentPane().add( BorderLayout.CENTER, panel );
 f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
 f.setVisible( true );
 public static class MyListener implements ActionListener{
 public MyListener() {}
 public void actionPerformed( ActionEvent e ) {
 System.out.println( "hi!! " + e.getSource() );
 // I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?

System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

How can I share a static field between 2 class loaders?

Hi,
I've been googling for 2 days and it now seems I'm not understanding something because nobody seems to have my problem. Please, somebody tell me if I'm crazy.
The system's architecture:
I've got a web application running in a SunOne server. The app uses Struts for the MVC part and Spring to deal with business services and DAOs.
Beside the web app, beyond the application context, but in the same physical server, there are some processes, kind of batch processes that update tables and that kind of stuff, that run once a day. Theese processes are plain Java classes, with a main method, that are executed from ".sh" scripts with the "java" command.
What do I need to do?
"Simple". I need one of those Java processes to use one of the web app's service. This service has some DAOs injected by Spring. And the service itself is a bean defined in the Spring configuration file.
The solution is made-up of 2 parts:
1. I created a class, in the web app, with a static method that returns any bean defined in the Spring configuration file, or in other words, any bean in the application context. In my case, this method returns the service I need.
public class SpringApplicationContext implements ApplicationContextAware {
     private static ApplicationContext appContext;
     public void setApplicationContext(ApplicationContext context) throws BeansException {
          appContext = context;
     public static Object getBean(String nombreBean) {
          return appContext.getBean(nombreBean);
}The ApplicationContext is injected to the class by Spring through the setApplicationContext method. This is set in the Spring configuration file.
Well, this works fine if I call the getBean method from any class in the web app. But that's not what I need. I need to get a bean from outside the web app. From the "Java batch process".
2. Why doesn't it work from outside the web app? Because when I call getBean from the process outside the web app, a different class loader is executed to load the SpringApplicationContext class. Thus, the static field appContext is null. Am I right?
So, the question I need you to please answer me, the question I didn't find in Google:
How can I share the static field between the 2 class loaders?
If I can't, how can I load the SpringApplicationContext class, from the "Java batch process", with the same class loader my web app was started?
Or, do I need to load the SpringApplicationContext class again? Can't I use, from the process, the class already loaded by my web app?
I' sorry about my so extensive post...
Thank you very much!

zibilico wrote:
But maybe, if the web service stuff gets to complicated or it doesn't fulfill my needs, I'll set up a separate Spring context, that gets loaded everytime I run the "Java batch process". It'll have it's own Spring configuration files (these will be a fragment of the web app's config files), where I'll define only the beans I need to use, say the service and the 2 DAOs, and also the DB connection. Additionally, I'll set the classpath to use the beans classes of the web app. Thus, if the service and DAOs were modified in the app server, the process would load the modified classes in the following execution.You'll almost certainly have to do that even if you do use RMI, Web services etc. to connect.
What I suggest is that you split your web project into two source trees, the stuff that relates strictly to the web front end and the code which will be shared with the batch. The latter can then be treated as a library used by both the batch and web projects. That can include splitting Spring configuration files into common and specific, the common beans file can be retrieved from the classpath with an include. I regularly split web projects this way anyway, it helps impose decoupling between View/Controller and Model layers.
On the other hand, you might consider running these batch processes inside the web server on background threads.

How can I compare two summary field in cross-tab?

Similar Messages

Maybe you are looking for