How can I configure Oracle Forms???

I have Oracle Forms 9.4.0. for solaris sparc, i have problems when i try to get in to database, the explorer gives me next message error
ORA-12154: TNS: could not resolver service name
the file tnsnames.ora haves this configuration:
REP_SUNSICREAAPLICA =
(ADDRESS = (PROTOCOL = tcp)(HOST = sunsicreaaplica)(PORT = 1950))
DB1_SUNSICREAAPLICA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.48.22)(PORT = 1521))
(CONNECT_DATA =
(SID = DB1)
(SERVICE_NAME = DB1)
and the listener.ora is:
LISTENER_INFRA =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = sunsicreaaplica )(PORT = 1521))
SID_LIST_LISTENER_INFRA =
(SID_LIST =
(SID_DESC=
(GLOBAL_DBNAME=DB1)
#(ORACLE_HOME= /Oradata1/metadata)
(SID_NAME=DB1))
i apreciate so much your help.
Thanks

#(ORACLE_HOME= /Oradata1/metadata)Why is this line commented ? Try to stop the listener, uncomment that line and restart the listener.

Similar Messages

  • How can i open oracle forms in windows 7

    Dear Members
    i was install windows 7 professional edition and install oracle database and forms 10 last edition from oracle.com
    now , when i open the forms application and open any form message appear inform me that stopped working and windows can check online for solution
    i am trying to open any form by many ways but all my tries failed
    can any one help me .
    Regards

    The picture you provided is so small it cannot be seen. So, it does not help.
    There are numerous reasons why a module would not be able to open, but because you are on an unsupported platform it may be difficult to determine as this may be the cause. Other reasons might include the following:
    1. You can only open source files. You cannot open compiled modules. In other words, only FMB, MMB, PLL, and OLB files will open in the Builder. FMX, MMX, and PLX will not.
    2. Files are of an new version. Meaning, you cannot open a version 11.1.1 FMB in a version 10.1.2 Builder
    3. Attempting to access files stored on network shares (mapped drives) may sometimes fail due to delay access times (timeout). This is most common in Windows networks.
    4. If the module has dependencies on other modules, but those modules cannot be found or accessed, a failure to open may occur.
    There are a variety of other causes, but these are the most common. However, the fact that you are using an old Forms version on a new Operating System, which we know to have problems is not a good idea.

  • How can i store oracle forms in the database.

    hi,
    i m using oracle 10g and forms 6i. is it possible to store the forms in the database, is it possible plz tell the steps.
    with thanks and regads
    anish kumar

    It's possible to store any file in a database as a blob. The steps are the same for a FMX as it is for any other type of file.
    See
    http://www.dbasupport.com/oracle/ora9i/storing_word_docs.shtml
    However, if you are doing this because you want to use Forms Builder to to query the database for a form and run it, then that may not be possible.

  • How can I convert Oracle Developer 2000 forms?

    How can I convert Oracle Developer 2000 forms and menus to the Oracle 9ids forms and menus

    Check out the upgrade and migration section on
    http://otn.oracle.com/products/forms
    We will soon have a new section on OTN about Forms upgrades, keep checking back for more info.

  • Adobe is asking for Java SE 6 runtime. How can I use Oracle's Java 7 instead?

    Platform: Mac OS X, version 10.9.2 (the latest available as of May 11, 2014)
    When trying to open my old Adobe Illustrator, as part of Creative Suite CS4, I get the following error message:
    To open "Adobe Illustrator CS4," you need a Java SE 6 runtime. Would you like to install one now?
    I have the latest Oracle Java 7 (Version 7 Update 55) installed and I don't want the historic Apple Java 6. How can I configure Adobe software to use the already installed Java 7?
    Best, regards
    Tom

    despite this being for a different os, read (especially the end paragraphs) Install Java (JRE) | Mac OS 10.7 Lion

  • How create animation in oracle forms 6i

    any one can guide me how create animation in oracle forms 6i

    hello to every one..
    my dear friend developer is a busniness application tool.you can create
    animaiton on flash and other animaiton softwares and then you can call on froms.
    best regard
    amk

  • How to deploy the Oracle Forms and Reports 10g in Web?

    Currently I am working in Oracle forms & Reports conversion project (6i to 10g).
    As of now 6i forms working as a standalone application. After migrated it to 10g, I need to deploy the forms and reports in web.
    Any one know how to deploy the Oracle forms and Reports in web?
    Please help me out. Thanks in advance.
    Vimal

    Hello Frank,
    for development, you need to install Oracle Developer
    Suite 10g. This includes Forms and Reports.this topic interests me too, because I've downloaded Developer Suite and Database (both for 10g) from Oracle website, installed them, but I couldn't connect to a database.
    What should be done for me to create a database link and be able to connect locally, in my personal Desktop computer? (Not to a server)
    Once it was told me here that I should download 10g Database - I did it, and installed it, but it didn't work. Later, some of my job partners said I should install them in a sequence - that is, 1st the Developer, and 2nd the Database. But it has failed too. And I don't know how to configure a database connection.
    Best regards,

  • How can I open a Form located in UNIX

    Hi all,
    I have a problem!
    The system in my company is a 3-tier architecture:
    Database-tier: SUN SOLARIS
    Middle-tier (Oracle Application 11i): SUN SOLOARIS
    Clien-tier: Windows 2000/98
    I want to customize the Oracle application's forms. How
    can I open the forms source located in the UNIX (middle tier)
    with forms 6i in Windows 2000?
    If I FTP the source forms from UNIX to my working environment
    (windows 2000), the attached library will be lost. How can
    I easily do the development in such situation?
    Thank you very much!!!!!!

    Just remember,
    the binaries will not be compatible. You can open an .fmb file and modify it on windows machine (assuming you are going to use the same version of developer), after the modifications are don on the windows end, you need to move (copy, ftp, your choice) back to Solaris, and recompile the same form on Solaris to generate a binary (.fmx) for that particular platform. If you made modifications on libraries and/or menus of the same application on windows end, you need to do the same thing - recompile it on the unix end to have the related plx and mmx files.

  • How to make the oracle forms 10g applet or runtime the size of 1024x768?

    Hi,
    Can anyone tell me
    How to make the oracle forms 10g applet or runtime the size of 1024x768?
    Thanks in advans..

    Please post your question in Forms Topic
    Kamran Agayev A. (10g OCP)
    http://kamranagayev.wordpress.com
    [Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

  • HOW CAN I GET ORACLE DEMO PROJECT, SAMPLE PROJECTS.....

    how can i get oracle sample projects on forms and reports...........
    give me the link so i can download it and look at it how it works
    thanks

    You're looking for Microsoft Access. Try www.microsoft.com.
    Using Oracle Forms requires an Oracle database instance. It is client-server architecture. It is not a matter of merely downloading example-install.exe, installing it, and being on your way looking at "how everything works".
    That is what you are seemingly expecting. And in that case, you do not want to use Oracle. You want to use a mickey mouse little file based database tool like MS Access.

  • How can i config Oracle Services for Microsoft Transaction Server in  9.2

    how can i config Oracle Services for Microsoft Transaction Server in 9.2

    There's nothing to configure on the client side. On the database side you just need to run a script once to setup an ORAMTS admin account and some other infrastructure.

  • How can i get oracle 10g and Xquery

    sir,
    How can i download Oracle 10g and Xquery.I need it urgently for my project work...
    thanks..
    somesh

    The following link provides a good starting point for your endeavour:
    http://www.oracle.com/technology/sample_code/products/forms/index.html

  • How can I export oracle e-business suite online help?

    hi,dear expert
    how can I export oracle e-business suite online help?
    I want to view it when I works offline,please help me ,thank you!!
    null

    I think Oracle Apps Help system is built in to Apps installation and you can’t easy enough export it. I have got a few things in mind:
    1. You can install Apps on your laptop and by that way make ONLINE Help available offline ;) Online help describes Forms, fields, navigation and really ONLINE things. To me it sounds a bit illogical to have ONLINE help without access to the application.
    2. The Apps Doc Set is available on the OTN. You can easy download it for OFFLINE reading. And this documentation is intended for offline reading.
    3. Help files for each module located in $APPL_TOP/*/11.5.0/help/US directories. You can try to copy a directory for a module you are interested in on you PC and try to read it offline.
    Just my 0.0.2£,
    Yury

  • How can i run my form application on the other site?

    how can i run my form application(already compiled) on the other computer without developer/2000 environment?
    What should i do ?
    Thanks in advance!

    Well you have to install ORACLE developer runtime on your client side. then just copy your complied forms (fmx) files to your client machine and set it up to run.
    Hope this helps
    Faisal

  • Do anyone knows where can I download oracle forms 6.0?

    hi all,
    Do anyone knows where can I download oracle forms 6.0?
    This is quite urgent.
    Please help.
    amy

    Hi all,
    I know this is no longer supported forms 6.0, however, I have an application which is running on forms 6.0 for solaris. Unfortunely, I lost the CD and I have to make some changes on this application. On the mininal changes if I can get back oracle forms 6.0 for solaris.
    Could anyone can tell me where can I download from the web site? I have been search for whole day long, but I could find any.
    Many Thanks,

Maybe you are looking for