How can i convert a .img disk image to a .dsk disk image?

I own an intel-iMac running MacOS 10.5.6.
I own both an Apple //c and Apple System Disk 4.0.2.
I now have an emulator called Virtual ][.
I also have a disk image of the Apple System Disk 4.0.2,
but it is in the .img format. I need it to be in the .dsk
format so the emulator can "see" the disk and run it.
How can I convert from .img to .dsk?
Thanks,
Apple //GS

have a look here:
http://discussions.apple.com/thread.jspa?threadID=246070

Similar Messages

How can I convert an array to image(8bit)

I can convert an array(acquire from usb camera)to a picture,but not images(8 bit grayscale),how can I do it.many thanks!
Attachments:
array to image.vi ‏249 KB

Sorry, this is the kind of thing that happens when you have been out for too long.
Message Edité par chilly charly le 10-22-2006 11:09 AM
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
array%20to%20image[1].png ‏3 KB

How can I convert an OVM vm (.img) to VDI (virtualbox)?

Hi,
how can I convert an OVM vm (.img) to VDI (virtualbox)?
Is .img format a raw image? If yes can I use "VBoxManage convertdd" to convert from .img to vdi?
tnx & regards,
S.

Hi,
"VBoxManage convertdd" solved.
Regards,
S.

I recored a video with my ipad, downloaded it to my mac but I cant upload it to Youtube because the format IMG is not a video format. How can I convert it?

How can I convert a video I took with my ipad on the format IMG to a supported format for Youtube?

To upload videos to YouTube we have to make sure videos are in a format that YouTube accepts. Here’s the list of some well-known video formats which YouTube supports:
WebM files (Vp8 video codec and Vorbis Audio codec)
MPEG4, 3GPP and MOV files – (typically supporting h264 and mpeg4 video codecs and AAC audio codec)
AVI (Many cameras output this format – typically the video codec is MJPEG and audio is PCM)
MPEGPS (Typically supporting MPEG2 video codec and MP2 audio)
WMV)
FLV (Adobe – FLV1 video codec, MP3 audio)
But I think you get the wrong video file. iPad recorded video files are in m4v, mp4, mov, avi format but not the img files. Anyway, if you need a video converter, Format factory or iFunia video converter are good choice.
Good luck!

How can I convert an Image ( or BufferedImage ) to Base64 format ?

Hi folks...
How can I convert an Image, or BufferedImage, to the Base64 format ?
The image that I want to convert, I get from the webCam connected to the computer...
Anyone can help me ?
Rodrigo Kerkhoff

I suggest you read this thread concerning this:
http://forum.java.sun.com/thread.jspa?forumID=31&threadID=477461
Failing that, Google is your friend.
Good luck!

How can I convert a pdf to a tif image?

How can I convert a pdf to a tif image? Which software package would I need to have this capability, Adobe XI Standard, or Adobe XI pro, etc.?

Both Standard and Pro can export to a tif file.

How can I convert .mov files for use with other apps?

When loading movies taken on a friend's digital camera to my PC, the video files were saved as Quicktime .mov files. I am now unable to pull those files into any other software program (I want to put them onto a CD or DVD and play on external players.) How can I convert .mov files to a .wmv or .avi or mpeg?
Thanks - J
RS720G Windows XP

Kodak Digital Camera QuickTime MOV Problems
After battling a number of serious problems with the videos taken by my new Kodak Digital Camera, I decided to write up this page so that anyone searching the web would find out the true answers without as much grief!
I’ve also made some other comments about my experience with the camera, in case anyone was considering buying a Kodak camera in the near future.
I bought the camera just before Christmas 2004 in the US. At the time of writing, it is a pretty good model for domestic use—about 5.2 megapixels, costing about US$400 (or AU$600 back here in Australia). From a company as reputable as Kodak, I expected no problems.
The first disappointing thing was that the spring inside the spring-loaded battery clip, inside the camera, came loose within days. It proved impossible to reattach it without completely dismantling the camera, which (despite my engineering qualifications) I was not willing to do. This would usually have been a warranty item, but Kodak’s warranty does not extend to other countries. I’ve since had to jam cardboard in to keep the battery clip engaged, and have taped the battery bay shut to avoid it opening accidentally when taking the camera out of the case. This works fine with the docking station (an extra AU$100!), but it means I can no longer charge the battery without the docking station (since you need to take it out to charge it). I was not impressed!
The camera takes good photos, and I have no complaint with that. The controls and camera menus are well-designed. The large display is excellent.
The EasyShare software is not as easy to use as it looks, has a habit of crashing, has a web update program that is always running in the background of Windows, and transferring images is nowhere as easy or quick as it should be. I’ve now uninstalled it completely, and simply copy the photos directly from the device. (If the camera memory is nearly full, and you just want to transfer the last few photos, then it’s impossible to use the EasyShare software to browse the camera’s photos without it actually downloading the whole lot through the USB cable—and it takes forever! Copying from the device directly doesn’t hit this bug.)
The capability to take video using the camera was a great attraction when I selected it, and, if it worked properly, it would make it quite a handy little camcorder in its own right. With a 512 MB memory card in it, over an hour of video can be recorded at Video-CD quality (320 x 240 24fps video, 8 kHz audio). It’s not full digital video, but it would still be a pretty good feature for a US$400 camera. If it worked.
The first disappointing thing about taking videos is that the optical zoom cannot be adjusted while the camera is recording. It can only be adjusted between video sequences. I don’t know why this restriction was made in the design.
The real problems, however, start when you try to do anything with the video clips captured by the camera. Kodak has chosen to capture the videos in QuickTime format. This is fine—QuickTime is, technically, excellent—except that there is no simple way to convert QuickTime MOV files to AVI or MPEG or VCD. The Kodak software comes with a QuickTime player, so you can see the video clips on the computer you installed the software on—and they look good. Problem is that you can’t just dump those MOV files onto your Video-CD creator (it will usually want AVI or MPEG files).
It takes some time to realise that Kodak have not even bothered to include any software with the camera that can convert these MOV files to a more useful format. This is a serious PR blunder, and anyone bitten by this is unlikely to go near the Kodak brand ever again.
After some web searching, owners of these cameras generally find that the best (only?) freeware solution to convert MOV to AVI is Bink and Smacker’s RADtools program.
RADtools is amazingly powerful for the price (i.e. free), but it hits two fundamental problems with Kodak Digital Camera MOV video files, that are the fault of the Kodak camera, not RADtools. (I know this because every other MOV converter hits the same problems—except one, as you will see below.)
The first problem is that the sound cannot be converted properly. When you convert any Kodak MOV files, there is an “aliasing” of the sound at the upper frequencies. This is a technical description—you get a whispery, tinny, C3PO type of echo to everything. It really destroys the quality of the video clips (especially bad when I am trying to capture priceless memories of my 4- and 7-year-old sons—I don’t want their voices destroyed for all time).
Every conversion program I tried ended up with the same audio problem. I concluded that it is something strange in the way the Kodak cameras store the MOV files.
Strangely enough, I noticed that the QuickTime player didn’t distort the audio like this. The audio sounds just fine through QuickTime. More on this shortly.
The second, more serious problem is that RADtools could not properly convert some of the video clips at all. (This problem only affected less than 10% of the clips I originally filmed, but most of those clips were very short—less than 20 seconds. It seems that the probability of this problem gets worse, the longer the clip.) RADtools would misreport the number of frames in the clip, and would stretch out a small number of frames of video (in slow motion) to match the length of the audio.
Again, I confirmed that this is a property of some of the MOV files stored by the camera. Other conversion tools also had problems with the same MOV clips.
After more angst, I found a number of websites in which frustrated owners of these Kodak cameras have reported the exact same problems.
It was only then that I discovered that QuickTime itself can convert MOV files to AVI. Believe it or not, it’s built into the QuickTime Player that Kodak supplies, or that you can download free from apple.com. The problem is that you can’t use it unless you pay Apple to upgrade to QuickTime Pro.
After realising that this would probably be the only way to get decent audio for these clips, I paid the AU$59 to Apple Australia to get the licence key that enables the extra “Pro” menu options in QuickTime.
Sure enough, you can “Export” any MOV file to a number of formats, including AVI. And guess what? The audio comes out fine!
So, the first piece of advice I can give is: pay Apple the US$29 (or whatever amount it is in your country) to upgrade QuickTime to QuickTime Pro.
From here, however, there are still a few snags to untangle.
The first is that the default settings for Exporting to AVI don’t give a great result. It defaults to the Cinepak codec, medium quality. This looks terrible compared to the original QuickTime movie. Even on maximum quality, that codec just doesn’t give good results.
I finally found that the best option is to use the Intel Indeo Video 4.4 codec, set on maximum quality. This creates AVI files that are 10 to 20 times larger than the original MOV files, but the quality is there. If (like me) you only want the AVI files so you can dump them into your Video-CD program, then you want to keep the quality as high as possible in this first step. The extra hard disk space is not really a concern. When your VCD program converts the AVI files to MPEG, it will compress them to the usual VCD size.
Now for the biggest snag: those problem MOV files are still a problem, even for QuickTime Pro. Unbelievably, these Kodak cameras are spitting out MOV files which have some sort of technical flaw in their data specifications. QuickTime is able to play them back fine—and that seems to be all that the Kodak engineers really checked. However, if QuickTime Pro tries to export them, then when the progress bar gets to the end, it never finishes. It just keeps going. If you check the output folder with Explorer, and keep hitting F5 to update the file listing, you can see the file getting bigger, and bigger, and bigger. It never stops.
That this happens even for QuickTime itself (the native format for these files) confirms that the problem is with the software built into these Kodak cameras. It would be nice it they issued a patch or a fix. I couldn’t find one.
Fortunately, there is a “workaround” for this problem. I found it when trolling the net trying to find solutions to all these problems. The workaround is to use QuickTime Pro’s cut and paste facility. Open the problem MOV file, then press Ctrl-A (the standard key combination for “select all”—in this case it selects the entire film clip, as you can see by the grey selection of frames at the bottom of the player). Then hit Ctrl-C (i.e. copy, which in this case copies all the frames, but not the incorrect data structure in the original MOV file). Now hit Ctrl-N (i.e. new, in this case a new MOV file or player). In this new player, press Ctrl-V (i.e. paste). Now you have a new version of the MOV file with the bad data structure exorcised. You can save this under a new name, but make sure you specify “Make movie self-contained”—otherwise, it will simply be a link to the original (bad) MOV file, which you are probably going to delete once you save the exorcised version. (You also cannot overwrite the original file, because it needs to access that to make the “self-contained” movie. You need to give it a slightly different name, save it “self-contained”, then delete the original and rename the new copy back to what you wanted it to be. A pain, I agree, but at least the **** thing works—finally!)
The exorcised MOV file can now be used to Export to AVI format. (I also keep all the MOV files on a separate CD, in case I want to reconvert them to a different format in the future. I figure it’s better keeping the exorcised ones than the haunted ones.)
So I hope that all this answers a few of your questions. No, you weren’t being incredibly stupid.

How can I do an startup disk with DiskWarriori included?

How can I do an startup disk with DiskWarrior included?
I want to do it with System 9.2.2. for those days that apperas an ? in the disk... buf!
I did one but the Mac didn't recognize it...
Thanks

xjulia...
Remember what I said earlier? ""The tricky parts... Then install your wanted version of Mac OS 9""...
Install is a key word here.
Launch your latest Mac OS 9 CD and run the Installer targeting the mounted image. I prefer to do a minimum universal install from within the installer. Uncheck items of no use. If your CD is an older version of Mac OS 9, run the following version of an updater. Same can be done to update your utilities so long as there is a updater available for the utility.
<hr width="300">
Copying an already installed System Folder, is a bit to be desired, as you have tons of manual trashing (fixing, weeding, etc.) to do.
<--OR-->
Bootable CDs normally contain a copy protected System Folder that is equivalent to fooling around with mother nature. It unfortunately leaves you with many CD cake boxes of coasters in the process.
<hr width="300">
By the way— A mounted image gets refreshed in a funny way. Drag the mounted image to the trash and "chug-chug". Click on the [your named].img file and a fresh image gets mounted. Just keep an eye on both as you get the feel.
...Ron

How can I make a bootable disk for Mountain Lion?

How can I make a bootable disk for Mountain Lion?

Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.

How can I convert a large batch of NEFs to JPGs in one step or action?

How can I convert a large batch of NEFs to JPGs in one step or action? I'm very new to Lightroom and know almost nothing about it, so I need to know step-by-step. I've seen online advise about exporting but I don't know what that means - export from where to where? Can anyone help me? Thanks!

I suggest you take a little time to watch some tutorials. If you are that new to Lightroom that you don't understand what export means then it would probably be a good idea for you to get some other information as well. If you don't I think you'll find Lightroom can be very confusing. You haven't indicated what version of Lightroom you are using. The link I'm providing you is a series of getting started videos for Lightroom 5. And just about everything in this series will apply to other versions. You will note that there is one video devoted exclusively to exporting images. But I think you really need to watch the whole series.
Getting Started with Adobe Photoshop Lightroom 5 | Adobe TV

How can I convert iWeb page to html with NO javascript for email campaign?

I have a holiday greeting I made in iWeb '09 for my business. The service I'm using to use to manage my mailing list wants me to strip all javascript code from the page so it is not seen as spam when it is emailed.
How can I convert the page made in iWeb to an html page with no javascript?
Thanks

How can I convert the page made in iWeb to an html page with no javascript?
You cannot. There will be nothing left. iWeb pages rely a lot on JavaScript.
Use a template from Mail.app. Or create such template. These are simple TABLES and have no JavaScript in it.
Do Cmd-Shift-G in the finder and type :
/Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/
Open one of the folders and open each successive folder until you see files like Picnic.mailstationery.
Right-click to show the package content.
Then navigate thru Contents, Resources until you see the files and images you need.
Edit them to your hearts content.
Double-click the file Picnic.mailstationery and it will open in Mail.app for further processing.

How can I convert (or switch) the RGB percent values from the LR histogram into RGB values which are shown e. g. in PS/CameraRAW?

In LR 5.5 (same in previous versions) the RGB values in the histogram are shown in percent (relativ) values. I prefere to see the absolute values, but I can`t find any way to switch. Maybe this option is intentional disabled, because LR works in 16-Bit mode this would result in values up to 2^16. But as i compared the relativ values from LR with the absolute values from PS i run into a conversion problem. The following example shows the differences:
CameraRAW : RGB, 128,0,0
Lightroom: RGB, 43,8%, 19,0%, 6,2%
CameraRAW: RGB, 0,128,0
Lightroom: RGB, 29,8%, 47,5%, 17,5%
Mainly i have two questions:
1. Is there any possibility to change the percent RGB values in LR to absolut values?
2. How can i convert CameraRAW values to LR values (see above)?

TThe reason that a design decision was made from the beginning of LR to show only the percentage values was that RGB values are dependent on the color space and the LR histogram and numerical readout are derived from the Develop module's display space which is a hybrid color space with ProPhoto RGB primaries and the sRGB TRC. Thus the numerical values in the display would be different from the exported RGB image (in an orthodox space) and it was feared that this would be misleading. When soft proofing was introduced, because it involved converting the display to an orthodox space, it became possible to use the 0-255 scale in that mode.

How can I convert my logo 300dpi (274 pixels wide) from EPS to Gif format?

I have a logo that needs to be fixed for web purposes. It looks great in print but very poor quality on screen. I need one for my website and HTML email newsletters, along with a high quality GIF 300 DPI (274 pixels wide) for a HTML coded signature. I tried it in Photoshop to save this file as GIF format. But it seems my files is 274 pixel but it is 96 dpi rather than 300dpi. How can I convert it from EPS to 300 DPI (274 pixels wide) GIF file format??
I have an EPS file for it. Can anyone please help me ? Here is the LINK

If your logo is 274 pixel wide at 300DPI it will print .9" wide. DPI is meaningless for the web For displays and displaye drivers do not use the image file dpi setting. Displays are run at one resolution normally their manufactured pixel resolution. Display these days are manufactured with resolution ranging from 96PPI to over 300PPI so your logo will display 2.8" wide on a low 96ppi resolution display and .9" wide on a high 300ppi resolution display. The the difference between Jpeg and Gif is color Jpeg supports 8Bit color so 16M colors but does not support transparency. GIF only supports 256 mapped colors reduced to 255 colors it you want transparent empty pixels. You can also use PGN format which supports transparency and 8 or 16 bit color.

How can I get a recovery disk for Satellite P300-1CI?

Hi everybody,
first, sorry for my english, I'm a belgian and I speak french.
Yesterday I bought a toshiba Satellite P300-1CI, when I started, I must installed Vista home.
I would like to format my disk and reinstall my old Windows XP.
My question is : How can keep an image disk with Vista? I don't have an installation disk of Vista and don't know my registration key of it.
How can I have a recovery disk ?
Can you help me please.
PS : Sorry for my english

Hi mate
User manual is really interesting document and in most cases it answer all you questions ;)
Anyway, the Toshiba recovery disk should be created before you would format and install on the HDD.
You have to use the preinstalled Toshiba Recovery Disk Creator application in order to create the Recovery DVD.
Now to you other question;
The Vista image which is preinstalled and placed on the Recovery disk (after recovery disk has been created) is activated already and you dont need to insert any keys or activate anything.
Greets

How can I convert a Slideshow to an .m4v file?

I am trying to convert a slideshow, with audio, created with iDVD to a movie file to transfer into iMovie to be able to post on iWeb. How can I convert to an .m4v file?

You'll have to rip the iDVD disk that you burned with HandBreak or similar app and then import the resulting movie file into iMovie.
OT

How can i convert a .img disk image to a .dsk disk image?

Similar Messages

Maybe you are looking for