How can I convert the "AI one pt" symbol from LabVIEW 6.3 to LabVIEW 8.0?

Hi,
I've got an assignment with LabVIEW and I work with LabVIEW 8.0. The program I work with is written in LabVIEW 6.3 and had to be converted to LabVIEW 8.0. That went very well, except for one symbol. The "AI one pt" symbol (see enclosed figure) turned into an empty box (question mark). My question to you is how can I overcome this problem, or how can I simulate this symbol with LabVIEW 8.0?
With kind regards,
Sander Smeets

Hello,
Graziano is right about this. To make it completly clear: The block you refer to as a symbol is a VI belonging to the Traditional NI-DAQ driver. Currently there are two drivers for DAQ boards: DAQmx (the new one) and Traditional NI-DAQ (the old one). Since your VI was written in LabVIEW 6.x (6.3 never existed) the VI uses the old driver. What you need to do is: install Traditional NI-DAQ on your PC to get the support VI's for the driver in LabVIEW. This Traditional NI-DAQ installer should be on the driver CD which was delivered along with LabVIEW 8.0 or you can download it here:
http://joule.ni.com/nidu/cds/view/p/id/586/lang/en
There is one good point though which Graziano already mentioned: Which DAQ board are you using? It could be that you will need an ever older version of NI-DAQ (traditional) to get your DAQ board supported. Let me know if you have any more questions
Regards,
RikP - National Instruments Applications Engineering
Rik Prins, CLD
Applications Engineering Specialist Northern Europe, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

Similar Messages

  • How can i convert the quantity of one unit to other unit in BI 7?

    Hi ,
    I have developed an RFC function module in SAP BW (BI 7.0).
    For this function module I have to populate material  number and  Quantity required and UNIT.Every thing working good. If the user forgets to enter unit  or enters other unit  where Quantity in ODS is not mentioned in terms of that unit.WE have to Convert the Quantity requested into the Qunantity that exist in ODS or DATA BASE  based on the unit of measure .
    Please suggest me how can I convert the UNIT of measure of quantity?
    Thanks,
    Suresh.

    I have to do this with conversion table /BIO/PMAT_UNIT.
    IN THIS TABLE I DON'T KNOW HOW CAN I CONVERT?
    REGARDS,
    SURESH.

  • How can I convert the ringtone (m4r file) I made into an mp3 file on itunes?

    How can I convert the ringtone (m4r file) that I made into an mp3 file on iTunes? I want to put it on a CD, but I can't figure out how to convert it. I didn't buy it, I made it by converting a YouTube video into an mp3 (I wanted to get the little song in the video for a ringtone.) I'm not sure what to do. 

    Hello ed2345,
    Thanks for the help, but this is not the problem.
    It's hard to describe the problem, but I'll try it again, this time with pictures.
    I was left with the following folders in the iTunes Downloads folder.
    http://www.picfront.org/d/7yb3
    These TMP Folders have a download.m4a and a Info.plist file.
    After moving the audio files in iTunes a bit I get this.
    http://www.picfront.org/d/7yb2
    As you can see no other Information for the download.m4a than the length.
    That's how the .m4p file looks like
    http://www.picfront.org/d/7yb1
    And this is how the same .m4a file currently looks
    http://www.picfront.org/d/7yb0
    Like I said, I could edit all these download.m4a files by myself but that would leave some information out.
    Note: Sorry, I hope the links do not spam you with annoying ads. I don't get any but I was told that there can be some annoying one.

  • How can I convert the attribut lastLogon ...

    Hi,
    How can I convert the attribut lastLogon on an Active
    Directory Microsoft?
    Attributes ar = ctx.getAttributes(dn, attrs);
    if (ar != null) {
    for (int i=0; i<attrs.length; i++) {
    Attribute attr = ar.get(attrs);
    if (attr != null) {
    String values="";
    for ( Enumeration vals=attr.getAll();
    vals.hasMoreElements(); ) {
    values += vals.nextElement();
    if ( vals.hasMoreElements() )
    values += "\t";
    entry += SRV.SEPARATOR + values;
    When I take the value of the restrained attribut of the
    enumeration how I make convert it for example in a date ?
    I am using Windows2000 Advanced server.
    An example of lastLogon attribue is "126949578544450976".
    Any help is greatly appreciated.
    R.F.

    It looks to be the same format at accountExpires.
    If so, your in luck, I worked that one out back in January:
    http://forum.java.sun.com/thread.jsp?forum=51&thread=346718

  • How can I make the background one solid color?  It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop.  So, how can I have just a solid white background?

    How can I make the background one solid color?  It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop.  So, how can I have just a solid white background?

    When talking about a specific image posting the image may be useful.
    One can use a Layer Mask and add a white Layer underneath.

  • I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one?  Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

    I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one?  Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

    You can't merge accounts or copy content to a different account, so anything that you bought or downloaded via the old account is tied to that account - so any updates that those apps get you will only be able to download via that account. You can change which account is logged in on the iPad via Settings > Store

  • How can i convert the HTML information in XML form to a PDF?

    Hi does any body know how can i convert the content of an HTML field in a XML Form in a regular text to include in a PDF in a Java program?

    Hi ,
    On the tool bar you have an option "Browser" which is next to "HTML Editor" .
    You know that for using these elements wo have to map them with Data Schema.
    Step by step
    1. In data Model Under Data Schema Add a child and name it Read_More.
    2. In the left hand corner ,click on tab Type and from the drop down select "rid"
    3.Click on the "Browser" from the toolbar (as told earlier) and drag and drop it on the form.
    4. Drag the Data schema which u have made(Read_more) and drop it on the browser on form. On right hand side u will se the mapping done.
    5.Click on the "Browser" which is there in the form and on the right hand side of the form u will see the property window.
    6.In property window change the value of action property to "Item Entry point"
    7. Repeat step 3 and 4 in Render and show form but using "label" nad not browser.
    Do not forget to add Save button in Edit Form.
    This will solve your problem.
    PS:Rewards Point Please.
    Regards,
    Naveen Gupta

  • I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software

  • I have a 2 page PDF (portrait format), how can I convert the format to landscape?

    I have a 2 page (portaait format) PDF file how can I convert the PDF file into landscape format before I change it to XL?

    Hi jsremick,
    To change the page orientation of a PDF, you need to use Acrobat. (Reader allows you to rotate the page view, but not the pages  themselves).
    If you don't have Acrobat, feel free to give it a try. You can download the free 30-day trial from http://www.adobe.com/products/acrobat.html.
    Best,
    Sara

  • How can I convert the volume directory into a single file installer?

    How can I convert the volume directory into a single file installer? I would like to hide all the miscillaneous files that I don't care for and be able to have the installer double click a single file and have it automatically install.

    On the second prompt screen when prompted 'What kind of self-extracting Zip file file do you want to make?'
    Are you choosing the second option (self-extracting Zip file for software installation)?
    I have a word file that I created to help me remember - is there anyway to email it to you?

  • How can i convert the firefox-history-timestamp in places.sqlite into a normal date format? The firefox-timestamp is not equivalent to the unix-timestamp, that's why I ask. I could not find a conversion function. Does anyone know something about this?

    As I opened the places.sqlite with an sqlite-editor I found out that firefox saves the last_visit_date via a timestamp which is 16 digits long. I realized that the first 10 digits are similar to the corresponding unix-timestamp but not equal. So.. how can i convert the firefox-timestamp into a normal date? Or into the corresponding unix-timestamp?

    Write a bash script or 'C' program to change the date format and then use the sql update function to receive the stdio output 'where date_field='embeded date value'.

  • How can I convert the ITHMB photo files to PC readable format like JPEG?

    How can I convert the ITHMB photo files on my new Iphone 4s to a PC readable format like JPEG

    Look at the link and follow instructions to convert the file taken from a different thread in this forum:
    https://discussions.apple.com/thread/2640386?start=0&tstart=0

  • How can i pass the value one from to another form?

    hi all
    how can i pass the value one from to another form  with out use it when ever i want to needed this value that ican useit?
    like i have two fields U_test1 and U_test2  table name @AUSR
    that i have  four form  A! , A2,A3,A4    please tell me in details....?

    Hi,
    U can assign the values to some variables and access then in ur required forms.
    Vasu Natari.

  • How can i convert the data from mutiple-table to the other database(MSSQL)?

    Dears,
    How can i convert the data from mutiple-table to the other database such as MS-SQL?
    I have a third party system based on MS-SQL 2000.
    Now we want to make a integration between SAP R/3(Oracle) and SQL server.
    When my user releases the purchase order in R/3, the application we coded will convert the releated data to the temp database on the SQL server.
    But i don't know which tools will help me reach the purpose.  BAPI, LSMW, IDoc... ???
    Would anybody tell me which way is better and how to do?
    Thanks a lot!
    Kevin Wang

    Hello Kevin,
    The question to use which method depend on your detail requirements. If you use BAPI, you need to find which Bapi can provide the data you want. Bapi normally use as a function called by external system. So you need to develop an external program like VB/Java to call this Bapi and move it to SQL. LSMW is use when you want to upload data from an external system to SAP. So it does not serve your requirement. Idoc can be use to export data to an external system. Again like Bapi, you need to find what Idoc can provide the data you want. However, it does not any programming from the external system. If I were you, based on your requirements, I think writing an Abap program that read the data you want and download it to NT/SQL server will be faster and easier.

  • I had 2 games of clash of clans on 1 game centre.  Now I can only see one?  How can I find the other one?

    My kids had 2 games of clash of clans on 1 game centre.  Now I can only see one?  How can I find the other one?
    My daughter set up a game centre on her ipad.  My son, on his ipad used the same game centre log in.  He then set up his own game of clash of clans.  After my son set up his Clash of Clans, my daugher set up her own Clash of Clans using the same game centre log in on her ipad.  Both were using the Clash of Clans successfully on their own ipads using the same game centre log in. 
    One day my son signed into someone elses Clash of Clans, since then he is unable to go back to his Clash of Clans and can only see his sisters.
    Please let me know if this can be resolved.
    We wish to delete my daughters Clash of Clans - as she does not use it at all.  We would like to regain access to my sons. 
    My son can visit his Clash of Clans - his clan name is 'The Big Boys'  He has a shield that is blue with a yellow lightning from top right to bottom left.  His name is Fat Poo (I know ridiculous).
    If you can help us or advise us what to do we would make my son very happy
    thanks

    Thanks for taking a stab at it: that didn't prove to be the problem. That option in the settings for tabbed browsing was not checked.
    I may be a bit behind the times: I am used to tabbed browsing showing all the tabs it possibly can, instead of just the last one. Sometimes it won't even show the last tab: I can have 15 tabs open, and not see a single tab. I've been confused by this into closing a window with lots of tabs open, because it looks like a single page-window.
    My main problem with the tab-bar flashing to the end of the row is that it means a great deal more mouse-clicking around to browse.
    I haven't tried installing the latest beta. Maybe that would fix the problem.
    Toddo

Maybe you are looking for

  • A problem about change request release se10,urgent!

    hello,everyone, when I use tcode se10 to release my change requestno, an error occured: 'test call of transport control program (tp) ended with return code 0232',what it mean?who knows? pls give me help,.thanks very much.

  • How to send e-mails with attachments using microsoft exchange servers?

    I was wondering if there was a way to send e-mails with attached data files.  The e-mail server utilizes a Microsoft Exchange Server.  I would appreciate any help that is provided.

  • Change emergency restart to external optical drive?

    My four year old emac has had increasingly more frequent incidents where there is no display after restarting. I am quite adept at resetting the PRAM. However, this last time, nothing worked: I reset the PRAM; reset firmware; pressed the reset button

  • Unable to override printer settings anymore!

    I use IDCS2 and a Konica Minolta Magicolor 2450 printer. My problem is that I can no longer override the default printer settings from InDesign! To give an example: I have a document in color, that I need to print in grayscale using ONLY the black to

  • Illustrator CS2: Crash on Start-up

    I am running (or, trying to run!) Illustrator CS2 on an XP-Professional OS. It used to run fine. But now, whenever I try to start it, I get a "Runtime Error" during initilization, and it won't go any farther. Any tips on what I can do? Thanks!