How can I convert to NTSC color space?

I'm developing graphics for a Roku application which requires that colors be broadcast safe in the SDTV NTSC color space. For instance, I cannot have true white or true black colors. They are not allowed.
There is an RGB color space available. When I create a new document in CS6, I can select that profile as the color space. However, I am still able to paste in images that have pure white in them. When I save the document for web & devices, it still saves with the pure white.
I'm positive I've done this conversion in the past before, but I cannot get it working in CS6. I've tried going to Edit -> Assign Profile and Edit -> Convert to Profile, but in both cases the colors I am dealing with still end up pure white.
How can this be done?

Hi,
See if Filter>Video>NTSC Colors makes any difference.

Similar Messages

How can I convert a pages color document to a PDF Black and White doc.

How can I convert a pages color document to a PDF Black and White doc. Or, covert the color to B&W in a new doc?

> How can I convert a pages color document to a PDF Black and White doc. Or, covert the color to B&W in a new doc?
The general idea is that you colour correct photographs once, archive, and convert with or without colour changes. The archived photograph is unchanged - or we would be colour correcting the same photographs again and again and again.
If you have a photograph with a corrected exposure, you can open the photograph in the Apple ColorSync Utility, apply a colour space conversion to a grayscale appearance using the preinstalled ICC profile, save the photograph under another name, and place that in your pagination.
If you have a paginated document with corrected exposures, and any such non-scalable bitmap or scalable spline graphics as you have chosen to add, you can render the pagination as a whole to PDF through the same ICC profile, carrying out the same colour space conversion on any and all objects.
Caveat: If you intend the pagination for certain processes, in particular offset lithography, then you are probably expected not to render the type to grayscale, but rather to render it to single ink solid black. No software can determine what printing process you intend, you have to understand a bit about printing, and how to set up general colour space conversions in software. Ask your prepress provider, and if the answer is not prompt and proficient, pick another provider.
/hh

How can I convert a space from ABAP to CSV data?

Hello guys,
how can I convert a string like
"This is a%test%"
to
"This is a test "
into CSV data?
I try to with   REPLACE ALL OCCURRENCES OF '%' IN string_above WITH space,
but I got the string without space, like
"This is atest"
I read some posts that CSV will ignore space.
But which kind of symbol in CSV represents space?
Thanks for any suggestion!
Regards,
Liying

USE THE CODE AS SHOWN BELOW...
TYPES : BEGIN OF tp_data,
          line(4096),
        END   OF tp_data.
*&      Form gui_upload
      Upload the data from the input file to the internal table
FORM gui_upload.
*--Local data declaration
DATA: l_filename_ip TYPE string,
        tl_data       TYPE STANDARD TABLE OF tp_data WITH HEADER LINE.
l_filename_ip = p_input.
*--Upload Data
CALL FUNCTION 'GUI_UPLOAD'
       EXPORTING
            filename                = l_filename_ip
            filetype                = 'ASC'
            has_field_separator     = ''
       TABLES
            data_tab                = tl_data
       EXCEPTIONS
            file_open_error         = 1
            file_read_error         = 2
            no_batch                = 3
            gui_refuse_filetransfer = 4
            invalid_type            = 5
            no_authority            = 6
            unknown_error           = 7
            bad_data_format         = 8
            header_not_allowed      = 9
            separator_not_allowed   = 10
            header_too_long         = 11
            unknown_dp_error        = 12
            access_denied           = 13
            dp_out_of_memory        = 14
            disk_full               = 15
            dp_timeout              = 16
            OTHERS                  = 17.
IF sy-subrc <> 0.
    MESSAGE ID   sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    IF sy-subrc = 1.
      MESSAGE e000 WITH text-e04.
    ENDIF.
ELSE.
    LOOP AT tl_data FROM 2.
*--Taking the contents of the input file leaving the header part
      PERFORM split_and_save USING tl_data-line.
    ENDLOOP.
ENDIF.
ENDFORM.                    " gui_upload
*&      Form split_and_save
      Splitting the contents from the input file and saving them into
      an internal table
     -->P_TL_DATA_LINE text
FORM split_and_save USING fp_data.
*--Local data declaration
DATA : tl_data TYPE STANDARD TABLE OF tp_data WITH HEADER LINE,
         l_type TYPE c,
         c_space(1) TYPE c VALUE ' '.
*--Split at the Comma
SPLIT fp_data AT c_space INTO TABLE tl_data.
CLEAR inputtab.
*--Move it to the target fields
DO.
    ASSIGN COMPONENT sy-index OF STRUCTURE inputtab TO <fs_field>.
    IF NOT sy-subrc IS INITIAL.
      EXIT.
    ENDIF.
*--Extract source data
    CLEAR tl_data.
    READ TABLE tl_data INDEX sy-index.
*--Populate the target
    <fs_field> = tl_data-line.
ENDDO.
*--Append this record
APPEND inputtab.
ENDFORM.                    " split_and_save
In the above code u can use make inputtab like tp_data and get the result as requires in an internal table as space seperated fields.
In place of space u can also use any other symbol.
And after that u can replace all occurences of space with the comma by using the statement that u have written below.

How can I convert Pdf from RGB to CMYK, keeping font color 100% K while working in Illustrator?

How can I convert Pdf from RGB to CMYK, keeping font color 100% K while working in Illustrator?
When I try to open the document in Illustrator and I convert to CMYK the black font converts to rich black, but to set up for Offset printintg I need the text to be only in Black (100%K).
The original source of the document is a Microsoft Word file, I have converted the Word file to Pdf in order to setup for OFfset Printing.
Thanks

I have tried that way, but the downside is that the fonts are set in gray not in a 100%K, also I have to deal with other fonts that are composites and meant to stay Full Color. I could select text by text and convert to gray but, its a 64 page document and I wouldn't want to make a expensive mistake.

How can I convert (or switch) the RGB percent values from the LR histogram into RGB values which are shown e. g. in PS/CameraRAW?

In LR 5.5 (same in previous versions) the RGB values in the histogram are shown in percent (relativ) values. I prefere to see the absolute values, but I can`t find any way to switch. Maybe this option is intentional disabled, because LR works in 16-Bit mode this would result in values up to 2^16. But as i compared the relativ values from LR with the absolute values from PS i run into a conversion problem. The following example shows the differences:
CameraRAW : RGB, 128,0,0
Lightroom: RGB, 43,8%, 19,0%, 6,2%
CameraRAW: RGB, 0,128,0
Lightroom: RGB, 29,8%, 47,5%, 17,5%
Mainly i have two questions:
1. Is there any possibility to change the percent RGB values in LR to absolut values?
2. How can i convert CameraRAW values to LR values (see above)?

TThe reason that a design decision was made from the beginning of LR to show only the percentage values was that RGB values are dependent on the color space and the LR histogram and numerical readout are derived from the Develop module's display space which is a hybrid color space with ProPhoto RGB primaries and the sRGB TRC. Thus the numerical values in the display would be different from the exported RGB image (in an orthodox space) and it was feared that this would be misleading. When soft proofing was introduced, because it involved converting the display to an orthodox space, it became possible to use the 0-255 scale in that mode.

How can I convert output data (string?) from GPIB-read to an 1D array?

Hello all,
I am reading a displayed waveform from my Tektronix Oscilloscope (TDS3032) via the GPIB Read VI. The format of the waveform data is: positive integer data-point representation with the most significant byte transferred first (2 bytes per data point).
The output data of GPIB-Read looks like a string(?) where the integer numbers and a sign like the euro-currency sign are seperated by spaces e.g. #5200004C3 4 4 4 4 3C3C3........ (C represents the euro-currency sign).
How can I convert this waveform data into a 1D/2D array of real double floatingpoint numbers (DBL) so I can handle the waveform data for data-analysis?
It would be very nice if someone know the solution for this.
t
hanks

Hi,
First of all, I'm assuming you are using LabVIEW.
The first you need to do is parse the string returned by the instrument. In this case you need to search for the known symbols in the string (like the euro sign) and chop the string to get the numeric strings. Here are some examples on parsing from www.ni.com:
Keyword Search: parsing
Once you parse the numeric strings you can use the "String/number conversion VIs" in the String pallette.
Hope this helps.
DiegoF.Message Edited by Molly K on 02-18-2005 11:01 PM

How can I convert a version 9 PDF to version 10 or 11?

My scanner is a couple years old and it scanned it to version 9. The government website I'm trying to upload to is terrible and won't accept version 9 or earlier. I don't understand why; it's all PDF. Adobe Reader 11 can open version 9 so why can't theirs? How can I convert my PDF to version 10 or 11? I looked at pdfconverter, but it's free only for files <512 kb and mine is 1 MB. I'm certainly not paying $69 to convert one file.

https://bsaefiling1.fincen.treas.gov/NoRegSubmitServlet
"Please correct the errors before resubmitting the form:
Error: problem in processing the uploaded form.Please check a valid pdf form is attached"
They can't even put a space between sentences so how can they accept a PDF????
It waits about a second and then gives me an error.
They have a PDF form to fill out, but then it says to sign and attach it so I assume that means to scan it. It says "Click the above button to access the submission page in order to electronically file your completed Individual FBAR. Enter your email address, first name, last name and phone number and then browse on your computer to locate the individual FBAR you have completed. Once attached, you can file your FBAR electronically by clicking submit, at which time you should receive an email notification of acceptance." The bolded section must mean that I have to scan it. We're dealing with the government here, so not much makes sense.

How can I convert my logo 300dpi (274 pixels wide) from EPS to Gif format?

I have a logo that needs to be fixed for web purposes. It looks great in print but very poor quality on screen. I need one for my website and HTML email newsletters, along with a high quality GIF 300 DPI (274 pixels wide) for a HTML coded signature. I tried it in Photoshop to save this file as GIF format. But it seems my files is 274 pixel but it is 96 dpi rather than 300dpi. How can I convert it from EPS to 300 DPI (274 pixels wide) GIF file format??
I have an EPS file for it. Can anyone please help me ? Here is the LINK

If your logo is 274 pixel wide at 300DPI it will print .9" wide. DPI is meaningless for the web For displays and displaye drivers do not use the image file dpi setting. Displays are run at one resolution normally their manufactured pixel resolution. Display these days are manufactured with resolution ranging from 96PPI to over 300PPI so your logo will display 2.8" wide on a low 96ppi resolution display and .9" wide on a high 300ppi resolution display. The the difference between Jpeg and Gif is color Jpeg supports 8Bit color so 16M colors but does not support transparency. GIF only supports 256 mapped colors reduced to 255 colors it you want transparent empty pixels. You can also use PGN format which supports transparency and 8 or 16 bit color.

Hi Edge community, How can I set a custom colors

Hi Edge community,
How can I set a custom colors & font size
to the Adobe Edge Animate CC 2014
work space (stage, time lone, tools, etc...)
to get something close to this?
http://www.vrmall.eu/vr/EDGE_WORKSPACE_BLACK_n_WHITE/EDGE_WORKSPACE_BLACK_n_WHITE_r.01.jpg
Thanks a lot for Your time and help.

Hi Robyn_cpl,
thanks for the useful link - based on this I decided to
purchase the PDF of Adobe Edge Animate: The Missing Manual
by Chris Grover. Good book indeed, work space panels resizing
and docking are covered, but there is nothing on colors&fonts...
I've been searching intro's, tut's, forums on Edge, but no hint
on this... But I keep searching You Tube, Google, etc...
I'm intended to submit the subject to Adobe Edge Support.
Thanks again for Your attention

How can I convert .mov files for use with other apps?

When loading movies taken on a friend's digital camera to my PC, the video files were saved as Quicktime .mov files. I am now unable to pull those files into any other software program (I want to put them onto a CD or DVD and play on external players.) How can I convert .mov files to a .wmv or .avi or mpeg?
Thanks - J
RS720G Windows XP

Kodak Digital Camera QuickTime MOV Problems
After battling a number of serious problems with the videos taken by my new Kodak Digital Camera, I decided to write up this page so that anyone searching the web would find out the true answers without as much grief!
I’ve also made some other comments about my experience with the camera, in case anyone was considering buying a Kodak camera in the near future.
I bought the camera just before Christmas 2004 in the US. At the time of writing, it is a pretty good model for domestic use—about 5.2 megapixels, costing about US$400 (or AU$600 back here in Australia). From a company as reputable as Kodak, I expected no problems.
The first disappointing thing was that the spring inside the spring-loaded battery clip, inside the camera, came loose within days. It proved impossible to reattach it without completely dismantling the camera, which (despite my engineering qualifications) I was not willing to do. This would usually have been a warranty item, but Kodak’s warranty does not extend to other countries. I’ve since had to jam cardboard in to keep the battery clip engaged, and have taped the battery bay shut to avoid it opening accidentally when taking the camera out of the case. This works fine with the docking station (an extra AU$100!), but it means I can no longer charge the battery without the docking station (since you need to take it out to charge it). I was not impressed!
The camera takes good photos, and I have no complaint with that. The controls and camera menus are well-designed. The large display is excellent.
The EasyShare software is not as easy to use as it looks, has a habit of crashing, has a web update program that is always running in the background of Windows, and transferring images is nowhere as easy or quick as it should be. I’ve now uninstalled it completely, and simply copy the photos directly from the device. (If the camera memory is nearly full, and you just want to transfer the last few photos, then it’s impossible to use the EasyShare software to browse the camera’s photos without it actually downloading the whole lot through the USB cable—and it takes forever! Copying from the device directly doesn’t hit this bug.)
The capability to take video using the camera was a great attraction when I selected it, and, if it worked properly, it would make it quite a handy little camcorder in its own right. With a 512 MB memory card in it, over an hour of video can be recorded at Video-CD quality (320 x 240 24fps video, 8 kHz audio). It’s not full digital video, but it would still be a pretty good feature for a US$400 camera. If it worked.
The first disappointing thing about taking videos is that the optical zoom cannot be adjusted while the camera is recording. It can only be adjusted between video sequences. I don’t know why this restriction was made in the design.
The real problems, however, start when you try to do anything with the video clips captured by the camera. Kodak has chosen to capture the videos in QuickTime format. This is fine—QuickTime is, technically, excellent—except that there is no simple way to convert QuickTime MOV files to AVI or MPEG or VCD. The Kodak software comes with a QuickTime player, so you can see the video clips on the computer you installed the software on—and they look good. Problem is that you can’t just dump those MOV files onto your Video-CD creator (it will usually want AVI or MPEG files).
It takes some time to realise that Kodak have not even bothered to include any software with the camera that can convert these MOV files to a more useful format. This is a serious PR blunder, and anyone bitten by this is unlikely to go near the Kodak brand ever again.
After some web searching, owners of these cameras generally find that the best (only?) freeware solution to convert MOV to AVI is Bink and Smacker’s RADtools program.
RADtools is amazingly powerful for the price (i.e. free), but it hits two fundamental problems with Kodak Digital Camera MOV video files, that are the fault of the Kodak camera, not RADtools. (I know this because every other MOV converter hits the same problems—except one, as you will see below.)
The first problem is that the sound cannot be converted properly. When you convert any Kodak MOV files, there is an “aliasing” of the sound at the upper frequencies. This is a technical description—you get a whispery, tinny, C3PO type of echo to everything. It really destroys the quality of the video clips (especially bad when I am trying to capture priceless memories of my 4- and 7-year-old sons—I don’t want their voices destroyed for all time).
Every conversion program I tried ended up with the same audio problem. I concluded that it is something strange in the way the Kodak cameras store the MOV files.
Strangely enough, I noticed that the QuickTime player didn’t distort the audio like this. The audio sounds just fine through QuickTime. More on this shortly.
The second, more serious problem is that RADtools could not properly convert some of the video clips at all. (This problem only affected less than 10% of the clips I originally filmed, but most of those clips were very short—less than 20 seconds. It seems that the probability of this problem gets worse, the longer the clip.) RADtools would misreport the number of frames in the clip, and would stretch out a small number of frames of video (in slow motion) to match the length of the audio.
Again, I confirmed that this is a property of some of the MOV files stored by the camera. Other conversion tools also had problems with the same MOV clips.
After more angst, I found a number of websites in which frustrated owners of these Kodak cameras have reported the exact same problems.
It was only then that I discovered that QuickTime itself can convert MOV files to AVI. Believe it or not, it’s built into the QuickTime Player that Kodak supplies, or that you can download free from apple.com. The problem is that you can’t use it unless you pay Apple to upgrade to QuickTime Pro.
After realising that this would probably be the only way to get decent audio for these clips, I paid the AU$59 to Apple Australia to get the licence key that enables the extra “Pro” menu options in QuickTime.
Sure enough, you can “Export” any MOV file to a number of formats, including AVI. And guess what? The audio comes out fine!
So, the first piece of advice I can give is: pay Apple the US$29 (or whatever amount it is in your country) to upgrade QuickTime to QuickTime Pro.
From here, however, there are still a few snags to untangle.
The first is that the default settings for Exporting to AVI don’t give a great result. It defaults to the Cinepak codec, medium quality. This looks terrible compared to the original QuickTime movie. Even on maximum quality, that codec just doesn’t give good results.
I finally found that the best option is to use the Intel Indeo Video 4.4 codec, set on maximum quality. This creates AVI files that are 10 to 20 times larger than the original MOV files, but the quality is there. If (like me) you only want the AVI files so you can dump them into your Video-CD program, then you want to keep the quality as high as possible in this first step. The extra hard disk space is not really a concern. When your VCD program converts the AVI files to MPEG, it will compress them to the usual VCD size.
Now for the biggest snag: those problem MOV files are still a problem, even for QuickTime Pro. Unbelievably, these Kodak cameras are spitting out MOV files which have some sort of technical flaw in their data specifications. QuickTime is able to play them back fine—and that seems to be all that the Kodak engineers really checked. However, if QuickTime Pro tries to export them, then when the progress bar gets to the end, it never finishes. It just keeps going. If you check the output folder with Explorer, and keep hitting F5 to update the file listing, you can see the file getting bigger, and bigger, and bigger. It never stops.
That this happens even for QuickTime itself (the native format for these files) confirms that the problem is with the software built into these Kodak cameras. It would be nice it they issued a patch or a fix. I couldn’t find one.
Fortunately, there is a “workaround” for this problem. I found it when trolling the net trying to find solutions to all these problems. The workaround is to use QuickTime Pro’s cut and paste facility. Open the problem MOV file, then press Ctrl-A (the standard key combination for “select all”—in this case it selects the entire film clip, as you can see by the grey selection of frames at the bottom of the player). Then hit Ctrl-C (i.e. copy, which in this case copies all the frames, but not the incorrect data structure in the original MOV file). Now hit Ctrl-N (i.e. new, in this case a new MOV file or player). In this new player, press Ctrl-V (i.e. paste). Now you have a new version of the MOV file with the bad data structure exorcised. You can save this under a new name, but make sure you specify “Make movie self-contained”—otherwise, it will simply be a link to the original (bad) MOV file, which you are probably going to delete once you save the exorcised version. (You also cannot overwrite the original file, because it needs to access that to make the “self-contained” movie. You need to give it a slightly different name, save it “self-contained”, then delete the original and rename the new copy back to what you wanted it to be. A pain, I agree, but at least the **** thing works—finally!)
The exorcised MOV file can now be used to Export to AVI format. (I also keep all the MOV files on a separate CD, in case I want to reconvert them to a different format in the future. I figure it’s better keeping the exorcised ones than the haunted ones.)
So I hope that all this answers a few of your questions. No, you weren’t being incredibly stupid.

How can I convert a report/ ALV in PDF format?

Can you tell me how can I convert a report or ALV in PDF format?
Regards,
Subhasish

hi ,
check this..
*& Report ZSPOOLTOPDF                                                 *
*& Converts spool request into PDF document and emails it to           *
*& recipicant.                                                         *
*& Execution                                                           *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on      *
*& screen                                                              *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
                                    DEFAULT '[email protected]',
           p_sender LIKE somlreci1-receiver
                                    DEFAULT '[email protected]',
           p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
        INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
      wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
      gd_eventparm LIKE tbtcm-eventparm,
      gd_external_program_active LIKE tbtcm-xpgactive,
      gd_jobcount LIKE tbtcm-jobcount,
      gd_jobname LIKE tbtcm-jobname,
      gd_stepcount LIKE tbtcm-stepcount,
      gd_error    TYPE sy-subrc,
      gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject   LIKE sodocchgi1-obj_descr,
      it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      gd_sender_type     LIKE soextreci1-adr_typ,
      gd_attachment_desc TYPE so_obj_nam,
      gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
      gd_destination LIKE rlgrap-filename,
      gd_bytecount LIKE tst01-dsize,
      gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
        INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
           c_no(1)     TYPE c   VALUE ' ',
           c_device(4) TYPE c   VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
       to sap-spool
       spool parameters   %_print
       archive parameters %_print
       without spool dynpro
       and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
    PERFORM convert_spool_to_pdf.
    PERFORM process_email.
    if p_delspl EQ 'X'.
      PERFORM delete_spool.
    endif.
    IF sy-sysid = c_dev.
      wait up to 5 seconds.
      SUBMIT rsconn01 WITH mode   = 'INT'
                      WITH output = 'X'
                      AND RETURN.
    ENDIF.
ELSE.
    SKIP.
    WRITE:/ 'Program must be executed in background in-order for spool',
            'request to be created.'.
ENDIF.
      FORM obtain_spool_id                                          *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
                 INTO TABLE it_tbtcp
                 WHERE      jobname     = gd_jobname
                 AND        jobcount    = gd_jobcount
                 AND        stepcount   = gd_stepcount
                 AND        listident   <> '0000000000'
                 ORDER BY   jobname
                            jobcount
                            stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
    message s004(zdd) with gd_spool_nr.
    gd_spool_nr = wa_tbtcp-listident.
    MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
    MESSAGE s005(zdd).
ENDIF.
ENDFORM.
      FORM get_job_details                                          *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
       IMPORTING
            eventid                 = gd_eventid
            eventparm               = gd_eventparm
            external_program_active = gd_external_program_active
            jobcount                = gd_jobcount
            jobname                 = gd_jobname
            stepcount               = gd_stepcount
       EXCEPTIONS
            no_runtime_info         = 1
            OTHERS                  = 2.
ENDFORM.
      FORM convert_spool_to_pdf                                     *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount            = gd_bytecount
       TABLES
            pdf                      = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            OTHERS                   = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
    TRANSLATE it_pdf_output USING ' ~'.
    CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
    it_mess_att = gd_buffer.
    APPEND it_mess_att.
    SHIFT gd_buffer LEFT BY 255 PLACES.
    IF gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
ENDFORM.
      FORM process_email                                            *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
      FORM send_email                                               *
--> p_email                                                       *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject         = 'Subject'.
gd_attachment_desc = 'Attachname'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod        = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod        = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
    gd_sender_type = space.
ELSE.
    gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_mess_bod
                                      it_mess_att
                                using p_email
                                      'Example .xls documnet attachment'
                                      'PDF'
                                      gd_attachment_name
                                      gd_attachment_desc
                                      p_sender
                                      gd_sender_type
                             changing gd_error
                                      gd_reciever.
ENDFORM.
      FORM delete_spool                                             *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
       EXPORTING
            spoolid = ld_spool_nr.
ENDFORM.
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      Send email
FORM send_file_as_email_attachment tables it_message
                                          it_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
data:   t_packing_list like sopcklsti1 occurs 0 with header line,
        t_contents like solisti1 occurs 0 with header line,
        t_receivers like somlreci1 occurs 0 with header line,
        t_attachment like solisti1 occurs 0 with header line,
        t_object_header like solisti1 occurs 0 with header line,
        w_cnt type i,
        w_sent_all(1) type c,
        w_doc_data like sodocchgi1.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name   = ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
regards,
venkat.

How can I convert an int to a string?

Hi
How can I convert an int to a string?
/ad87geao

Here is some the code:
public class GUI
    extends Applet {
public GUI() {
    lastValue = 5;
    String temp = Integer.toString(lastValue);
    System.out.println(temp);
    showText(temp);
private void showText(final String text) {
    SwingUtilities.invokeLater(new Runnable() {
      public void run() {
        tArea2.setText(text + "\n");
}

How can I convert an InputStream to a FileInputStream ???

How can I convert an InputStream to a FileInputStream ???

Thanks for you reply, however, I am still stuck.
I am trying to convert my application (which runs smoothly) to a signed applet. The following is the original (application) code:
private void loadConfig() {
String fileName = "resources/groupconfig";
File name = new File(fileName);
if(name.isFile()) {
try {
     ObjectInputStream in = new ObjectInputStream(new FileInputStream(fileName));
     pAndGConfig = (PAGroupsConfig)in.readObject();
     in.close();
     return;
} catch(ClassNotFoundException e) {
     System.err.println("++ERROR: "+e);
} catch(IOException e) {
     System.err.println("++ERROR: "+e);
System.out.println("Can't find file: " + fileName);
Because all code and resources now reside in a Jar file (for the signed applet), I must use the following line to access the resources:
InputStream is = this.getClass().getResourceAsStream(fileName);
I then need to convert the 'InputStream' to 'ObjectInputStream' or 'FileInputStream' so that I can work with it.
I would be very grateful if you could help shed some light on the matter - Cobram

How can I convert an OVM vm (.img) to VDI (virtualbox)?

Hi,
how can I convert an OVM vm (.img) to VDI (virtualbox)?
Is .img format a raw image? If yes can I use "VBoxManage convertdd" to convert from .img to vdi?
tnx & regards,
S.

Hi,
"VBoxManage convertdd" solved.
Regards,
S.

How can I convert an AUDIO MPEG-4 to an MPEG3 format? I need it for a Powerpoint Presentation

How can I convert an AUDIO MPEG-4 to another type of file, such as MPEG3 or mp3

Use Handbrake.
You can download it for free from this site:
http://www.macupdate.com/info.php/id/12987/handbrake
Good luck

How can I convert to NTSC color space?

Similar Messages

Maybe you are looking for