How can I do to build a java FAX?

Hi to everyone. I need an help for my problem. I have to implement a FAX in java language, but I don't know how can I do it.
I have a server that I use to send and receive mail and I'd like to use this server to send FAX. I can connect the FAX machine to this server, so I think it is possible to implement something that use this server and this fax.
I don't know if it is possible to implement a program that read every x second if there are some messages in a particular table (used to store the message to send by fax) and then send them by FAX....If it is possible do it... do you know an open source code that can do it? Or can you help me with some information about it?
Thanks to everyone!!!!

Hi to everyone. I need an help for my problem. I have
to implement a FAX in java language, but I don't know
how can I do it.
I have a server that I use to send and receive mail
and I'd like to use this server to send FAX. I can
connect the FAX machine to this server, so I think it
is possible to implement something that use this
server and this fax.
I don't know if it is possible to implement a program
that read every x second if there are some messages in
a particular table (used to store the message to send
by fax) and then send them by FAX....If it is possible
do it... do you know an open source code that can do
it? Or can you help me with some information about
it?
Thanks to everyone!!!!
Have/know no open source for this, but you could take following approach:
- Scan open-sources like Linux etc. for FAX-implementations. The'll probably be in C/C++.
- If possible, port it to Java.
Implementing a program that runs/checks is relatively easy when using thread-programming in Java.
Maybe you should also check out www.programmersheaven.com for fax-implementations....

Similar Messages

  • How can i open the popup from java class

    Hi,
    Please tell me how can i open the popup from java class.
    I am using jdev 11.1.1.7.0
    I have used the below code which works fine in jdev 2.1 but it will have some errors in 11.1.1.7.0.
    Please tell me some way to do this in all jdev versions.
    Bean obj = (Bean)RequestContext.getCurrentInstance.getExternalContext.getPageFlowScope(“obj”);
    Code for hide pop-up
    FacesContext context = FacesContext.getCurrentInstance();
    String popupId = obj.getPopUpBind().getClientId()
    ExtendedRenderKitService service = Service.getRenderKitService(FacesContext.getCurrentInstance(),
    ExtendedRenderKitService.class);
    String hidePopup = "var popupObj=AdfPage.PAGE.findComponent('" + popupId +
    "'); popupObj.hide();";
    service.addScript(FacesContext.getCurrentInstance(), hidePopup);
    Code to Show pop-up
    StringBuffer showPopup = new StringBuffer();
    showPopup.append("var hints = new Object();");
    showPopup.append("var popupObj=AdfPage.PAGE.findComponent('" +
    obj.getPopUpBind().getClientId() + "');popupObj.show(hints);");
    service.addScript(FacesContext.getCurrentInstance(), showPopup.toString());
    Code need to be added in jsff pop tag
    binding="#{pageFlowScope.bean.popUpBind}
    Variable need to be added in Bean.java
    private RichPopup popUpBind;

    Hari,
    Since you're using a non-public build of JDeveloper, you should be using a non-public forum.
    John

  • How can i display the result of java class in InputText ?

    Hi all,
    How can i get the result of java class to InputText Or OutputText ???
    also can every one in the forum give me road map for dealing with java in oracle adf because i'm beginner in oracle adf
    i saw some samples in oracle adf corner but it's difficult for me.

    User,
    Always mention your JDev version, technologies used and clear usecase description (read through this announcement : https://forums.oracle.com/forums/ann.jspa?annID=56)
    How can i get the result of java class to InputText Or OutputText ???Can you elaborate on your requirement? Do you mean the return value of a method in a class as output text? Or an attribute in your class (bean?) as text field?
    -Arun

  • How can i execute Spaces API in java main class?

    Hi
    I am able to execute Spaces API through portal application. However if i try to execute it in java main class, its throwing an exception
    "SEVERE: java.io.FileNotFoundException: .\config\jps-config.xml (The system cannot find the path specified)"
    oracle.wsm.common.sdk.WSMException: WSM-00145 : Keystore location or path can not be null or empty; it must be configured through JPS configuration or policy configuration override.
    How can i set this path, so that i can execute Spaces API from java main class.
    Need this main class to configure in cron job, to schedule a task.
    Regards
    Raj

    Hi Daniel
    Currently i have implemented create functionality in my portal application using Spaces API, which is working fine. Now the requirement is, i need to implement a "Cron Job" to schedule a task, which will execute to create space(for example once in a week). Cron job will execute only the main method. So I have created java main class, in which I have used Spaces API to perform create space operation. Then it was giving exception.
    Later I understood the reason, as I am executing the Space API with a simple JSE client, its failing since a simple java program has no idea of default-keystore.jks, jps-config.xml, Security Policy. Hence i have included those details in main class. Now I am getting new error,
    SEVERE: WSM-06303 The method "registerListener" was not called with required permission "oracle.wsm.policyaccess"
    For your reference i have attached the code below, please help. How can i use Spaces API in java main method(i mean public static void main(String[] args) by giving all required information.
        public static void main(String[] args) throws InstantiationException,
                                                      GroupSpaceWSException,
                                                      SpacesException {
            Class2 class2 = new Class2();
            GroupSpaceWSContext context = new GroupSpaceWSContext();
            FactoryFinder.init(null);
            context.setEndPoint("http://10.161.226.30/webcenter/SpacesWebService");
            context.setSamlIssuerName("www.oracle.com");
            context.setRecipientKeyAlias("orakey");
            Properties systemProps = System.getProperties();
            systemProps.put("java.security.policy","oracle/wss11_saml_or_username_token_with_message_protection_client_policy");
            systemProps.put("javax.net.ssl.trustStore","C:\\Oracle\\Middleware11.1.7\\wlserver_10.3\\server\\lib\\cacerts.jks");
    systemProps.put("oracle.security.jps.config","C:\\Oracle\\Middleware11.1.7\\user_projects\\domains\\workspace\\system11.1.1.7.40.64.93\\DefaultDomain\\config\\fmwconfig\\jps-config.xml");
            systemProps.put("javax.net.ssl.keyStore",C:\\Oracle\\Middleware11.1.7\\user_projects\\domains\\workspace\\system11.1.1.7.40.64.93\\DefaultDomain\\config\\fmwconfig\\consumer.jks");
            systemProps.put("javax.net.ssl.keyStorePassword", "Test12");
            System.setProperties(systemProps);
            GroupSpaceWSClient groupSpaceWSClient;
            try {
                groupSpaceWSClient = new GroupSpaceWSClient(context);
                System.out.println("URL: " +
                                   groupSpaceWSClient.getWebCenterSpacesURL());
                //delete the Space
                List<String> groupSpaces = groupSpaceWSClient.getGroupSpaces(null);
                System.out.println("GroupSpaces:: " + groupSpaces.size());
            } catch (Exception e) {
    Regards
    Raj

  • How can i use Unix database in java?

    How can i use Unix database in Java?
    Message was edited by:
    JPro

    I have not a clue about FoxPro, but the db then is FoxPro and not Unix. The better question would be "How do I connect to FoxPro DB running on Unix with JDBC?".
    My answer to that would be, search the Internet for a JDBC driver.

  • How can I check what version of Java Web Start is installed on the client ?

    hi,
    Can anyone tell me how can I check what version of java web start is installed on the client and display a message if the client has not the good version ?
    I mean:
    I'd like all people running my application use java 5 and if someone using java 1.4 try to run the application get a nice screen telling him to download the latest version of Java Web Start.
    Is this possible ?
    Thanks in advance.

    Of course, I put this on my jnlp file,
    <resources>
        <j2se version="1.5+"/>
        <jar href="..... "/>
    </resources> But even with that, it doesn't display a nice message but a kind of exception instead.
    Thanks in advance.

  • How can i use C/Javascript/php/Java in flex?

    can i embed these language into my flex project?
    since i have to check harddisk space, free memory remain. Also, i need to check the pixel of photos before the photos becoming bitmapdata
    please help~

    saipanBETTY0509 wrote:
    Subject: How can i use C/Javascript/php/Java in flex?
    can i embed these language into my flex project?
    You can't.  Why do you want to do this?
    saipanBETTY0509 wrote:
    since i have to check harddisk space, free memory remain. Also, i need to check the pixel of photos before the photos becoming bitmapdata
    I think what this means is "I want to check to see how much hard disk space is available.  Also, I need to check the pixel dimensions of an image."
    Is that right?
    There is no way in the Flash Player (as far as I know) that you can determine the amount of free disk space.  However, in AIR you can use air.File.applicationStorageDirectory.spaceAvailable to determine the storage space available in the application storage directory.
    As far as determining the dimensions of an image, there are plenty of good resources out there on that.  Maybe this one will be helpful to you?
    http://www.yswfblog.com/blog/2008/12/22/flash-10-experiments-the-warholizer-loading-and-pr ocessing-local-images/
      -Josh

  • How can i modify exe resource in java?

    How can i modify exe resource in java?
    No jni
    thx.

    if it is .NET code decompilation is possible if, and only if the code is not Packed by protections!
    but if the EXE file is native and created by VB 6.0,C/C++,Delphi,... it is not possible to obtain source code from it, not as far as i know.
    (some program does it , but the returned source code is as useful as its assembly code in debugger).
    if decompilation was that easy then Reverse Engineering was no longer needed!
    What program it is so that can put two exe file into each other ?
    the program you seen might put second exe file into its DATA section then when it executes ,
    it jumps to data section of itself!
    otherwise it is not possible.
    Good luck.
    Edited by: 0mega7 on Apr 5, 2008 8:27 AM
    Edited by: 0mega7 on Apr 5, 2008 8:29 AM

  • How can I have a #defined  in Java?

    How can I have a #defined in Java that
    works like C/C++?
    Edited by: thunderball1234 on Mar 25, 2009 7:55 AM

    BigDaddyLoveHandles wrote:
    I just threw up in my mouth a little. Why do you want to preprocess Java files?I have some code that works with primitive arrays and I want to use that code for byte, char, double, float and long. I first wrote this as a file to be processed by cpp, I then changed to use perl and now I use XSLT.
    What is interesting to me is that the perl version was easiest to write and easiest to maintain. The XSLT version is bloody difficult to understand.
    Edited by: sabre150 on Mar 25, 2009 4:03 PM

  • How can we prevent back button  using java script

    how can we prevent back button using java script

    Would be quicker for you to google for javaScript
    javascript:window.history.forward(-1);

  • How can I avoid automatic build of an User Code Block at SystemBuild

    Hi,
    I've created a simulation with a User Code Block at SystemBuild. I want the building process to be performed manually, so I changed the buildProcess tag in xml file which is generated by SystemBuild to "Manual". Unfortunately it doesn't work. When I try to execute the simulation, the xml file is overwriten, the buildProcess tag is set to "Automatic" and the software tries to build the library again. How can I avoid automatic build of an User Code Block at SystemBuild?
    Thanks.
    Attachments:
    fileInterface.zip ‏1 KB

    The xml file generated when a UserCodeBlock is linked usually contains the following at the top of the file:
    <DynamicLib xmlVersion="1"
                architecture="WIN32_DLL"
                rtLibLinkage="Dynamic"
                buildProcess="Automatic"
                debug="no">
    To prevent sim from automatically rebuilding your UCB dll change the tag buildProcess to "Manual"
    Bob Wilson
    MATRIXx R&D

  • How can we position the cursor in Java?

    how can we position the cursor in Java? Please help me.
    and also provide me the list of threading practical question?

    I am talking in context of console.Note that the console can be a number of things in Java; command shell, teletype, etc. You can use either JNI or a third-party library such as jcurses for this sort of thing.
    ~

  • How can i merge javafx code and java fxml code in a single project

    how can i merge javafx code and java fxml code in a single project.
    Please let me Know as soon as possible.

    Everything that it is possible to retrieve from a class file can be deduced from the class file definition.
    http://java.sun.com/docs/books/vmspec/2nd-edition/html/ClassFile.doc.html
    Sylvia.

  • How can i migrate Power Builder 8.0 Function into oracle PL/SQL

    Hi Oracle Experts...
    How can i migrate Power Builder 8.0 Function into oracle PL/SQL.. I had migrate some of the coding from PB to PL/SQL. But i don't know how can i convert PB structure(here structure is a data type) into oracle PL/SQL.
    Instead of structure what is the equivalent in oracle plsql
    Below i pasted my POWER BUILDER FUNCTION:
    Long ll_perd,ll_lnperd,ll_mon,ll_effmon,ll_instno,ll_odno
    Decimal{5} ldl_actual,ldl_diff,ldl_inst
    Datetime ldt_first,ldt_exp,ldt_oddt, ldt_lastprod
    String ls_instmode,ls_inst
    str_batch lstr_od //Structure to store odamt and oddate
    Select pay_c_final,lon_d_expiry, lon_d_lastprod
    Into     :ls_inst,:ldt_exp, :ldt_lastprod
    From      loan_mast
    Where branch_c_code = :gs_branch and
              act_c_type      = :as_actype and
              act_c_no           = :as_acno;
    If Sqlca.Sqlcode = -1 Then
         f_message('FT-0189',Sqlca.Sqlerrtext)
         lstr_od.batchslno = -1
         Return lstr_od
    End If
    If adt_prodt > ldt_exp Then
         Select Ceil(months_between(:adt_prodt,:ldt_exp)) Into :lstr_od.batchslno From dual;
         lstr_od.cheqdt = ldt_exp
         lstr_od.batchslno = DaysAfter(Date(ldt_lastprod), Date(adt_prodt))
    Else
         If ls_inst = 'N' Then
              If adt_prodt > ldt_exp Then
                   Select Ceil(months_between(:adt_prodt,:ldt_exp)) Into :lstr_od.batchslno From dual;
                   lstr_od.cheqdt = ldt_exp
              Else
                   lstr_od.batchslno = 1
              End If
         ElseIf ls_inst = 'Y' Then
              Select first_d_due,lon_c_instperd,lon_n_perd
              Into     :ldt_first,:ls_instmode,:ll_lnperd
              From     loan_mast
              Where branch_c_code = :gs_branch and
                        act_c_type      = :as_actype and
                        act_c_no          = :as_acno;
              If Sqlca.Sqlcode = -1 Then
                   f_message('FT-0189',Sqlca.Sqlerrtext)
                   lstr_od.batchslno = -1
                   Return lstr_od // Return Structure
              End If
              Select Ceil(months_between(:adt_prodt,:ldt_first)) Into :ll_mon from dual;
              If ll_mon > 0 Then
                   Select Nvl(ln_n_balance,0),Nvl(ln_n_instlamt,0),Nvl(ln_n_instlno,0)
                   Into     :ldl_actual,:ldl_inst,:ll_instno
                   From     loan_inst_sch
                   Where act_c_type = :as_actype and
                             act_c_no     = :as_acno and
                             ln_d_effdate = (Select Max(ln_d_effdate)
                                                           From     loan_inst_sch
                                                           Where act_c_type = :as_actype and
                                                                     act_c_no     = :as_acno and
                                                                     ln_d_effdate < :adt_prodt);
                   If Sqlca.Sqlcode = -1 Then
                        f_message('FT-0224', Sqlca.Sqlerrtext)
                        lstr_od.batchslno = -1
                        Return lstr_od
                   ElseIf Sqlca.Sqlcode = 100 Then
                        lstr_od.batchslno = 1
    *                    Return lstr_od*
                   End If
                   If adl_bal > ldl_actual Then
                        If ldl_inst > 0 Then
                             lstr_od.batchslno = (adl_bal - ldl_actual) / ldl_inst
                        End If
                   Else
                        lstr_od.batchslno = 1
                   End If     
                   If lstr_od.batchslno = 0 Then lstr_od.batchslno = 1
                   //For full OD
                   If ll_mon > ll_lnperd Then
                        lstr_od.batchslno = (ll_mon - ll_lnperd) + lstr_od.batchslno
                   End If
                   If ls_instmode = 'Q' Then
                        lstr_od.batchslno = lstr_od.batchslno * 3
                   ElseIf ls_instmode = 'H' Then
                        lstr_od.batchslno = lstr_od.batchslno * 6
                   ElseIf ls_instmode = 'Y' Then
                        lstr_od.batchslno = lstr_od.batchslno * 12
                   End If
                   Select :adt_prodt - :lstr_od.batchslno Into :lstr_od.cheqdt From dual;
                   If ls_instmode = 'M' Then
                        ll_odno = ll_instno - lstr_od.batchslno // To get OD Date
                        Select ln_d_effdate
                        Into     :lstr_od.cheqdt
                        From     loan_inst_sch
                        Where act_c_type = :as_actype and
                                  act_c_no     = :as_acno and
                                  ln_n_instlno = :ll_odno;
                        If Sqlca.Sqlcode = -1 Then
                             f_message('FT-0224', + Sqlca.Sqlerrtext)
                             lstr_od.batchslno = -1
                             Return lstr_od
                        End If
                   End If
              Else
                   lstr_od.batchslno = 1
              End If
         End If
    End if
    Return lstr_od
    Thanks in adance
    Arun M M

    What are you going to return the structure to? What I would normally use here if the code was going to be used by other PL/SQL would be a PL/SQL object type.
    However, if PowerBuilder is still in the equation (you're moving the logic to PL/SQL but keeping PowerBuilder for the GUI ), then you'll have to return something else, because PowerBuilder doesn't understand PL/SQL object types. Perhaps passing a REF CURSOR as a OUT argument and populating it from the procedure. PowerBuilder could then retrieve the result of the procedure using a stored procedure based DataWindow.

  • How can i get system variable using java

    Hi,
    I just want to know how can i get system variables using java code.
    for example i want to get the the date for today or i want to get the number of processes that's running.
    Thanks alot

    Hi,
    I just want to know how can i get system variables
    using java code.
    for example i want to get the the date for today or i
    want to get the number of processes that's running.
    Thanks alotSome generic "system variables" are available though Java, usually through the System class.
    Date today = new Date();
    is instantiated with the current date and time.
    Other system values, like environment values, should be passed to java through the command line (-D option) by setting system properties.
    Finally, platform specific values like the number of processes running will have to be written in platform specific code and executed by JNI (java native interface).
    Java is platform or system agnostic. Common system values, like time, are implemented. Hopefully you won't need platform specific values.

Maybe you are looking for