How can I edit custom query in Data Insight

1. Whenever I click the edit sql query by right clicking on the custom query, the system hangs up and does not proceed further
2. Once you create a query without retrieving data results, is it possible to change to retrieve the data and how.
Thanks - Mahrukh

Hi Mahrukh,
I do not have this issue. What version of Data Insight are you using? What database is your metadata repository? What database is your source data in for the Data Insight query you are writing? Have you tried double clicking on the custom query - this should open it up for you to be able to edit it as well!
You should be able to open the query to edit it and either click the return data box or un-check it for any type of query.
Thanks,
Denise

Similar Messages

How can I make a query by date with several TDMS files?

Hi,
I have a project that can write and read TDMS files everyday (a file for each day with date and time). There, I can import those files to excel (I choose a file and load it). But, I have a question: How can I make a query by date with those TDMS files? I'd like make a time stamp for start date and stop date, where I could compare the TDMS file dates and sum the values that are in the channels where these files are similar. For example, I save a file with "02/01/2013" name, in other day "03/01/2013", in other day "04/01/2013"... so, i'd like put in time stamp for start date "02/01/2013" file and to stop date "04/01/2013" file, than, sum all values that range with my TDMS files existing. How can I make that?
Thanks all,
Val

Hello Val_Auto.
You're Brazilian, no? Me too. = ^ - ^ =
I converted VI to version of your LabVIEW (8.5). Is attached in this reply.
This VI search all your TDMS in a range of dates and join them in a single TDMS. I hope this is what you wanted.
Query TDMS is the main VI. The TDMS VI Search changes the date format that out from calendar control (which is DD / MM / YYYY) to DD-MM-YYYY. This is because you can't name files using "/". I chose "-" but, if necessary, you should change to keep the same format of your TDMS files.
If you have any doubt as to its operation or how to make changes to adapt VI for your application, keep at your disposal.
Thank you for your contact; I hope have helped you and succeed in your application.
Wesley Rocha
Application Engineer
National Instruments Brazil
Visite a nossa comunidade em PORTUGUÊS!!!
Attachments:
Query TDMS.vi ‏62 KB
tdms search.vi ‏24 KB

(How) can TLF recognize custom attributes/format/data?

Is there anyway we can associate custom data with specific range/span/elements of text?

The FlowElement class, which is the base class for all elements that make up a TextFlow in TLF, has the ability to store 'custom' data in at least three places:
1. The 'id' property. The 'id' property is a simple string property on all FlowElement descendents. You can set it directly on the flow elements or by using the ApplyElementIDOperation through the EditManager of the TextFlow containing the element. There are some methods on TextFlow for locating elements by their ID (recursive iteration over the child elements).
2. The 'stylename' property. The 'stylename' property can be utilized to implement named styles for text formats, etc., possibly in conjunction with a class that implements IFormatResolver. Although it's intended for that type of behavior, it could be used for other purposes. The TextFlow class has some utility methods to find elements by stylename, etc., so it can be a useful way to attach a 'category' or other designation to certain flow elements that you would like to locate as a group or things along those lines. Similarly to the 'id' property, 'stylename' can be set directly on flow elements or via the ApplyElementStyleNameOperation.
3. User styles. Every flow element has the capability to store key/value pair user data via getStyle()/setStyle() methods. There is also a corresponding operation called ApplyElementUserStyleOperation for user styles. This is the most flexible way to add additional data to flow elements. You can put almost anything you like in here.
See ASDoc API Reference for the FlowElement class here:
http://help.adobe.com/en_US/FlashPlatform/beta/reference/actionscript/3/flashx/textLayout/ elements/FlowElement.html
There are some notes (outdated, but still somewhat useful) from back when these capabilities were added to TLF in this blog post:
http://blogs.adobe.com/tlf/2009/02/tlf-api-changes-in-build-370-1.html
Keep in mind that if you set id/stylename/userstyles on a flow element directly (without using an operation via the edit manager), that causes a model change to be dispatched up through the TextFlow, which causes 'damage'. This is not a big deal, but you would need to call compose/update methods on the flow composer manually to recompose the TextFlow after the 'model' changes.
One other thing to keep in mind is that if you are using an edit manager that has an undo manager assigned, any changes that are performed via operations are automatically undoable/redoable. You can also avoid some of the headache that will result if you try to modify the flow elements directly, as mentioned in the previous paragraph. The edit manager will automatically trigger composition after an operation is performed.
And another thing is inheritance. Certain styles and properties are inherited down the text flow child tree. I believe that includes user styles. If you decide to use any of these methods for storing custom data, you'll probably want to understand how the inheritance is going to affect what you're trying to implement before you go too far. I don't have a good enough grasp on inheritance rules to give you an understandable explanation.
Hope this helps. My info may not be 100% accurate, but this is what things look like for custom data from my point of view.
Good luck,
Brent

How can I edit large amount of data using Acrobat X Pro

Hello all,
I need to edit a catalog that contains large amount of data - mainly the product price. Currently I can only export the document into excel file and then paste the new price onto the catalog using Acrobat X Pro one by one, which is extremely time-consuming. I am sure there's a better way to make this faster while keeping the accuracy of the data. Thanks a lot in advance if any one's able to help!

Hi Chauhan,
Yes I am able to edit text/image via tool box, but the thing is the catalog contains more than 20,000 price data and all I can do is deleteing the orginal price info from catalog and replace it with the revised data from excel. Repeating this process over 20,000 times would be a waste of time and manpower... Not sure if I make my situation clear enough? Pls just ask away, I really hope to sort it out, Thanks!

HT2486 how can I export the contact book data to a csv file for editing?

how can I export the contact book data to a csv file for editing?

You can edit a card right in Contacts. No need to export and re-import.
Select a name and on the right side, click the Edit button:

How can I create a query with web service data control?

I need to create a query with web service data control, in WSDL, it's query operation, there is a parameter message with the possible query criteria and a return message contains the results. I googled, but cannot find anything on the query with web service. I cannot find a "Named Criteria" in web service data control like normal data control. In Shay's blog, I saw the topics on update with web service data control. How can I create a query with web service data control? Thanks.

Hi,
This might help
*054. Search form using ADF WS Data Control and Complex input types*
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html

Hello, How can I edit or delete a custom label in the contacts list on iOS 7.0.3 on iPhone 4S ?

Hello, How can I edit or delete a custom label in the contacts list on iOS 7.0.3 on iPhone 4S ?
i need it so muchhh!

Sort of depend on what you are trying to do precisely. In Edit mode, if you tap on any label, you will be given a list of options, plus an Add Custom Label option near the bottom of the list

How can I edit or delete a custom label in the contacts list on iOS 7 on iPhone 4S ?

How can I edit or delete a custom label in the contacts list on iOS 7 on iPhone 4S ?

Alfre311 wrote:
I've been trying to find a way to do this since I updated to IOS 7, and I've just found the solution/explanation, even tho is a bit heavy to carry out.
IOS 6 creates custom labels and save them giving you the option to delete them.
IOS 7 creates custom labels but don't save them, so there is no need to have the option to delete them.
But here comes the problem, if you have some custom labes saved in you Iphone / Ipad with IOS 6 and you update it to IOS 7, the device will keep those labels saved, but you wont be able to delete them.
I realized this by going to contacts on Icloud. There those labels that I had on my devices weren't there. So simply restoring your device and configuring it as a new one to later sync your Icloud Contacts, will solve the problem.
I know this post is old, but I might just try this with iOS 8. I have outdated custom labels that annoy me, because I still seem them in the list as options. If I get desperate enough, I may try your solution.

How can i edit a date

how can i edit a date or a address

no header on page to use just my converted page or invation just need to change date

How can I create a query

Hi BWers,
How can I create a query, when the Customer run the report today he should see this month data.when the customer run the report for previous month he should see previous months data.How can I do this without going for Select options.

Hi,
If your customer run this report when he input a day in previous month, they want the whole previous month total data, you can use Replacement Path variable to get the previous month. If your customer run this report when he input a day in previous month, they want the data from 1st day to input day in the month, you can use customer exit variable to calculate 1st day in the previous month.
When the Customer run the report today he can see this month data, those two type variables can do.

How can I edit photos in iPhoto in Photoshop Elements? I select PE in iPhoto preferences but they stay in iPhoto for editing.

How can I edit photos in iPhoto in Photoshop Elements? I select PE in iPhoto preferences but they stay in iPhoto for editing.

Here's something you can try with a copy of your current library.
1 - go to iPhoto's Events preference pane and set the auto split option to 1 day per even.
2 - go the the Events mode, select all Events.
3 - go to the Events menu and and select Autosplit Selected Events.
which will give you an event for each day.
4 - again select all events (although it might be better do to fewer at a time) and export them to your desired destination via the File ➙ Export ➙ File Export menu option with the following settings:
The workflow above will produce a folder for each days photos with the date as the folder's title.

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external HD from the mbp, I get the following pop up window: The disk "external hard drive A" couldn't be ejected because "Lightroom" is using it. Quit that application and try to eject this disk again. When I do that and restart Lightroom 5, the Adobe Photoshop Lightroom - Select Catalog screen pops up but doesn't list my external hard drive A as a choice.
I've reviewed Adobe's Lightroom Help | Smart Previews Lightroom 5 web page and still haven't been able to figure what I'm doing wrong. Any help would be appreciated.

Your internal HDD. by default, is named 'Macintosh HD'. From what information you supplied, it looks like there is already a Lightroom catalog installed on you local (internal) HDD using the standard naming convention Adobe uses as well as a Lightroom catalog on your external drive which you created. To be sure of which catalog Lightroom is loading when it starts up, To do this, start Lightroom as you normally would. After it starts, select the Lightroom menu item, then select the Catalog Preferences item and finally, navigate to the General tab. The Location information will tell you exactly what catalog Lightroom is opening by default. This will likely be the Photography Mac Book Pro Versions catalog on your external HDD. Once that is confirmed, you are ready to proceed. As an additional test/verification, you can shut down Lightroom and, this time, start Lightroom while holding down the ALT/OPTION key. This will cause Lightroom to pause and display a screen which will allow you to chose a different catalog to open. Navigate to the /Users/[user name]/Pictures/Lightroom folder and select the Lightroom 5 Catalog.lrcat file. When Lightroom comes up, there should be no previews or folders as this catalog should be empty. Now you can be certain which catalog is being used and which catalog has all your data and you are ready to migrate your current catalog. Shut down Lightroom.
To migrate your current catalog, use Finder to locate your Photography Mac Book Pro Versions folder on your external drive. Select the folder and select COPY from the context menu. Next, use Finder to navigate to the /Users/[user name]/Pictures/Lightroom folder on you internal HDD. You can start at the Macintosh HD level and work your way down by opening each level (Macintosh HD/Users/[user name]/Pictures). Select the /Pictures folder and then select PASTE... from the context menu. When the COPY/PASTE is complete, you should see the following files on the Macintosh HD:
Macintosh HD/Users/[user name]/Pictures/Lightroom/ and
Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions
The Macintosh HD/Users/[user name]/Pictures/Lightroom folder will contain the empty default catalog the Adobe created when Lightroom was installed and Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions will contain a copy of the catalog you created on your external HDD.
You are almost done now. Make sure your external drive is still attached for this step. Restart Lightroom using the ALT/OPTION key again. When the Select Catalog screen appears, select the Choose a Different Catalog button (lower left side). When you do, a Finder window will open to allow you to navigate to a catalog of your choosing. Navigate to Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions and select the file Photography Mac Book Pro Version.lrcat. This is the copy you just created. Select the Open button and Lightroom should start. You should see all of your previews and settings just as before. Also, in the left hand panel, all of your folder should show up and none of them should be dimmed and none of your previews should display a small exclamation point badge. Either a dimmed folder name or an exclamation point badge indicates that Lightroom can't find the associated image file. If everything looks good, go to the Lightroom menu, select Preferences and then select the General tab. Under Default Catalog, select an option to either load the LAST catalog opened or select the Users/[user name]/Pictures/Photography Mac Book Pro Versions catalog from the drop down. Shut down Lightroom and then restart it normally. This time, when Lightroom starts, you should be viewing the new copy of your catalog. You can confirm this by looking at the General tab on the Catalog Preferences screen (Lightroom/Catalog Preferences menu items). Shut down Lightroom once again and this time, eject your external drive before restarting. This time, your folders in the left hand panel will be dimmed but you should be able to work with your smart previews. If Lightroom should display a Select Catalog screen with the external drive detached, double check your settings as it indicates Lightroom is still looking at the copy of the catalog on the external drive rather than the new copy you made.
Finally, if you are seeing dimmed folders and/or exclamation point badges with the external drive attached, this indicates a problem. You can select any folder and select Update Folder Location from the context menu. This will allow you to navigate to the copy on the external drive and select it. Lightroom will then update the catalog (select to synchronize the content). This will not only clear the dimmed folder problem but also remove the exclamation point badges for all photos in that missing folder. However, it may indicate that not all went well with the copy of the catalog so make sure to verify all went well. You can use the Get Info option on the two folders. You should see the same number of files/folders for both the copy on the internal drive as well as on the external drive but you can't rely on the byte count because of the possibility of differences between the geometry of the two drives. Hope this all helps!

In ST03 , how can i see the Query name, user id,how many times .

HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
Points will be awarded.
BR
sivs

Hi Siva,
Reporting statistics data is only written to the database table if BW statistics have been manually activated for the corresponding InfoProvider first. If this has not been done, it is therefore not possible to display any reporting statistics in transaction ST03.
Therefore activate the reporting statistics for all relevant InfoProviders. To do this, set the OLAP flag in the BW Administrator Workbench (transaction RSA1) in the area Tools ® BW Statistics for InfoProvider.
Check here...........
http://help.sap.com/saphelp_nw04/helpdata/en/ca/86df4254d81e1fe10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
Hope this will help you shiva.........
Regrads,
Vijay

How can I execute a query from a BSP application?

How can I execute a query from a BSP application?
I´m trying to execute a Query from intranet. I´ve been looking for examples, but the templates I´ve found doesn´t help me.
does anybody has an example?
Thanks.

Hi
Have you designed the BSP application ?
design it first with one page
page will have layout and Event handlers
Design the layout with the fields
in the event handler there are events
in the event On Initiailization or ON inputprocessing write the select query similar to what we write in routine ABAp and fetch the data into ITAB and that has to be passed to the Layout
see the doc
BSP
To learn how to create Web applications with Business Server Pages, you can work through the simple tutorials that build on each other. You should be able to run through all of the steps described here in your own system.
If you want to develop Web applications with BSPs, your system must meet the following requirements: Prerequisites for Creating Web Applications.
The following tutorials are available:
· First Tutorial: First Steps with Business Server Pages
· Second tutorial: A Small BSP Application and A Small BSP Application with HTMLB
· Third tutorial: Our First Online Bookshop
· Fourth tutorial: Further Developing the Bookshop
· A small Tutorial is also available for your first steps with the Model View Controller design pattern.
· For a more complex MVC tutorial based on the third tutorial, see: Our Little Online Bookshop Using MVC and HTMLB
When creating BSP applications, note the browser dependencies described in Note 598860.
steps:
1) start the transaction RZ10.
2) now u u have to select Profile name, so select the INSTANCE Profile from the list of options given with the Profile parameter list.U may find multiple instance profile in the list, so select the profile in which ur server name is given.
3) u will also find three options in the same window.
Administrator data, Basic Maintenance, and Extended Maintenance. So select the last one from that.
4) Now click on change button.
5) here u will find parameter icm/host_name_full, so now set it as FQDN.
6) Now copy ur settings with new version number.
7) Activate that version.
8) And now please restart ur WAS.
So this will set ur FQDN, and also don't forget to login using Admin User.
Now u also check for following service are active in your ICF setting or not,( just start transaction code SICF)
/default_host/sap/bc/bsp/sap
/default_host/sap/bc/bsp/sap/system
/default_host/sap/bc/bsp/sap/public/bc
/def ault_host/sap/public/bc
/default_host/sap/public/bc/ur
/default_host/sap/public/bsp/sap/public
/default_host/sap/public/bsp/sap/public/bc
/defaul t_host/sap/public/bsp/sap/system
/default_host/sap/public/bsp/sap/htmlb
if not then activate all.
check this link
Read this weblog...
/people/brian.mckellar/blog/2003/09/25/bsp-in-depth-fully-qualified-domain-names
http://www.thespot4sap.com/articles/SAP_WAS_Creating_BSP_Apps.asp
it consists of screen shots also
Check it.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/101c3a1cf1c54be10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e9/bb153aab4a0c0ee10000000a114084/frameset.htm
Regards
Anji

In Pages, how do I edit the "My Card" data?

in Pages, how do I edit the "My Card" data?
I can't get a sender field to select my Email address or mobile phone.
I've searched the Help file for "My Card" and come up with nothing.
I've looked in My Contacts and edited the data where my name has a little blue bust (figuring MAYBE that's the My Card),
but everything looks correct in there, so the sender field isn't pulling data from here.
So WHERE DO SENDER FIELDS COME FROM?

Peter:
First of all, THANKS for the quick reply. However it’s not working, either from the Link Inspector, or directly from the Menu. Here’s the steps to reproduce the problem:
I start with a new blank document, then pull down the Insert menu / Sender Field / Name / First Name, all it does is insert the word “First Name” into the document.
Pull down the Insert menu / Sender Field / Phone / Home Phone, all it does is insert the words “Home Phone”.
Same with all the other fields.
In other words, Sender Fields are not pulling data from the Contacts list.
I have done as you suggested, even closing both the Pages program AND Contacts, then starting Contacts first before starting Pages, in the hope that the link between the two will be established when starting Pages. Still no good.
I got it to work once last night (which was a good sanity-check for me to know I was doing it right) after editing my contact data inside the Contacts program, but I can’t get it to work today. I’ve tried rebooting, restarting Contacts, starting contacts BOTH before and after starting Pages. But it still won’t go.
It’s hard to believe this program is an Apple product, seeing how unreliable it is.
Any other suggestions?
Vic

How can I edit custom query in Data Insight

Similar Messages

Maybe you are looking for