How can I extend(resolve) a Path with a Stream of String

I have following two variables;
final Path root; // /a/b/c final Stream<String> split; // 'd', 'e', 'f' Path path; // /a/b/c/d/e/f
I want to resolve every element in split to the root.
Currently I'm trying to do like this.
// is the final combiner ok? final Path path = split.reduce(root, (p, s) -> p.resolve(s), (p1, p2) -> p1);
Is this the right way? Is there any other way to do this?
Is following code better than the above code?
Path path = root; split.forEach(s -> path = path.resolve(s)); // path must be final?
Thanks.

dear friend,
your 'key' transaction is SU01
and please look here:
http://help.sap.com/saphelp_47x200/helpdata/EN/52/671261439b11d1896f0000e8322d00/frameset.htm
good luck!

Similar Messages

How can i extend a wireless network with time capsule

How can i extend an existing wifi verizon wireless network with time capsule? the router is connected on the bottom floor. want to boost the signal to a home office on the top floor, four flights up. connect time capsule via ethernet cable to iMac on 4th floor? Do I have to start a second wifi network or can I set it to just boost the one I have? thank you

How can i extend an existing wifi verizon wireless network with time capsule?
It all depends on what you mean by "extend".
If you plan to "extend" by connecting the Time Capsule to the Verizon router using a wired Ethernet cable, this can be accomplished.
If you were hoping to connect the Time Capsule to the Verizon router using wireless only, unfortunately the Time Capsule and Verizon products are not compatible for that purpose.
Check with Verizon to see if they offer an "extender" or "repeater" that could be located very close to the Time Capsule.
This would provide both more wireless coverage and also allow you to connect the Time Capsule using an Ethernet cable from the "extender" or "repeater".

How can I extend my wireless network with the Time Capsule?

I recently bought a Time Capsule and set it up, backed up all my data, etc. It is currently plugged in to my AT&T Uverse wireless router via a LAN CAT5e cable. I am wondering if it is possible to wirelessly extend my preexisting network with the Time Capsule so I can move it somewhere else in my house where it can still pick up the signal but extend it. And if possible, how so? Or does it ALWAYS have to be wired'connected to my router for the internet to work?
Thanks in advance.

I am wondering if it is possible to wirelessly extend my preexisting network with the Time Capsule so I can move it somewhere else in my house where it can still pick up the signal but extend it.
Sorry but no. Extending using only wireless would require that the Time Capsule connect to another Apple router that is producing the wireless network.
Another way of saying the same thing is that you must have two Apple routers to be able to extend the signal wirelessly.

How can I extend a wireless network with my AirPort Extreme Base Station?

Today I purchased a brand new, dual-band base station to replace my Belkin N router, as I have had a handful of firewall, coverage, and other networking problems in my house lately. First off, I really like this router and it was very easy to setup. My MacBook Pro could use both bands and established a 300 Mbit/s link very quickly. After tweaking various settings to my liking, I was also able to maximize the connections on many of my non-Apple machines and devices. I noticed that the range of its network was better than my Belkin's, but unfortunately, it failed to completely saturate the area sufficiently. Since the Belkin still works well enough, I was hoping I could bridge them together one way or the other.
The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct? I would like to place them at opposite ends of my home so I can get strong WiFi signals everywhere inside. However, when I try to get the base station to connect to my preexisting WiFi connection, it tells me that I can't extend the network and fails to join.
So is this possible? And if it is, how would I go about setting it up? I know it would probably be easier if I had a simple range booster such as an AirPort Express, but I didn't buy one while I was at Fry's since I hoped I could make use of the older Belkin. This is its product page, if needed. Thanks for any suggestions.
-MacUser

The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct?
Sorry, but no. The AirPort Extreme Base Station cannot "join" a network like the AirPort Express or Time Capsule, but you wouldn't want to do this anyway because in this configuration these devices will only perform as wireless clients ... not routers.
Instead, the AirPort Extreme can either be extended or can extend another 802.11g or 802.11n AirPort ... or a very very few non-AirPort devices.
One option for your Belkin would be to connect it to the AirPort Extreme by Ethernet but this may not meet your requirements or be a desirable situation. Otherwise, you would need to get another AirPort to extend your current one.

How can I read generic-type object with object stream?

I declared a class like this
class Storage<K extedns Key, D extends Data> implements Serializable {
class Key implements Serializable {
interface Data extends Serializable {
}and I used ObjectOutputStream to save.
Storage<MyKey, MyData> storage = new Storage<MyKey, MyData>();
ObjectOutputStream out = new ObjectOutputStream(new FileOutputStream(new File("file")));
out.writeObject(storage);after save code, I tryed to write loading code like
ObjectInputStream in = new ObjectInputStream(new FileInputStream(new File("file")));
Storage<MyKey, MyData> storage = (Storage<MyKey, MyData>)in.readObject();but, it occurs a casting error. How can I downcast my Object object to Storage<MyKey, MyData> object?

Gone are the days where one could achieve completely warning free code, it seems since generics has arrived. Is this an ideal compilation environment? What about the rest of us developers that have molded our processes into such where the resulting code compiled without deprecation warnings and all other such warnings? Why does it make us feel as though we're doing something wrong when we suppress a warning, when we really aren't because we know what we are suppressing? why doesn't it feel as squeaky clean as it once did? Are there plans to deal with this in the future or is this how we proceed to develop from now on?

How can I extend my battery life with IOS 7 on my Ipad?

I didn't have this issue when I was using IOS 6. Ever since I upgraded the battery just drains away without me even using it. I've never had this problem before. I even went in and shut off all my apps etc.

When turning off any location or notification services, if you aren't turning it right off completely, be sure to check thru the hidden list and then those off as well. I can't look at which it's in because I did this last night on my iPhone and can't read my phone anymore. It's an eye strain to look into that.
There is a hidden one in location, called favorite places. That's a waste, unless you want it.
Turn wifi off when leaving the house to go to places where there is no wifi. It's constantly searching.
Turn airdrop off as well.
Last night I found really good tips on imore.com site, but I lost the page it was on to copy here. The result is I actually woke up this morning to an almost full battery on my iPhone. I need the list to do my iPad now.

How can I process Raw Images taken with a Nikon D7000 in PS4 Extended?

How can I process Raw Images taken with a Nikon D7000 in PSE Extended?

Hi there
Unfortunately, CS4 does not support the Nikon D7000. You'll have to download the Adobe DNG converter (links below) to process RAW files from your camera.
DNG converter 6.3 - Mac
DNG converter 6.3 - Windows
Here are some answers to similar questions asked over in the Photoshop General discussion:
If you need further information on this topic, please feel free to post in the Photoshop General Discussion or in the Camera Raw forum.
Camera Raw | Supported cameras
Camera Raw | compatible applications
Cheers,
Kendall

First, i want to know how can i pair my iPhone 5 with my lenovo laptop?

First, i want to know how can i pair my iPhone 5 with my lenovo laptop? and second i want to extend my warranty under apple care in india. how can i do that??

There are many apps in the App Store for transferring files between a computer and an iPhone using a cable, WiFi, or a cloud connection. Box and Dropbox cloud services are the easiest to use; I use Dropbox routinely to transfer business documents to our offices around the world.
Evernote is another widely used cloud service.
For local WiFi transfers there's Documents to Go, Airsharing, QuickOffice, and several dozen more. Documents to Go and QuickOffice also let you edit MS Word documents on the iPhone.

How can I print the "number lines" with the code in Visual Studio?

How can I print the "number lines" with the code in Visual Studio?

Hi BillionaireMan,
What about your issue now?
If you have resolved it, you can share the solution here, which will be beneficial for other members with the same issue.
If you did not, please tell us more information,we will try my best to help you.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am trying to load iTunes and keep getting a error 126 and reinstall program. I have uninstalled and reinstalled twice and keep getting the same error message. How can this be resolved.

I am trying to load iTunes and keep getting a error 126 and reinstall program. I have uninstalled and reinstalled twice and keep getting the same error message. How can this be resolved?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I have set up a Time Warner email account in Mac Mail but can't send email because the Road Runner SMPT server is "offline." How can this be resolved? ecause the Road Runner SMPT server is offline. How can I resolve this problem?

I have set up a Time Warner email account in Mac Mail but can't send email with this account because the Road Runner SMPT server is "offline." How can this be resolved?

Is this any help?
http://www.timewarnercable.com/en/residential-home/support/faqs/faqs-internet/e- mailacco/how-do-i-set-up-my-twc-mail-for-mac-osx.html
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
Outgoing ports are...
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

How can I get the element value with namespace?

I tried to get a element value in xml has namespace but i can't.
I removed the namespace, i can get a element value.
How can i get a element value with namespace?
--1. Error ----------- xml ------------------------------
<?xml version="1.0" encoding="UTF-8"?>
*<TaxInvoice xmlns="urn:kr:or:kec:standard:Tax:ReusableAggregateBusinessInformation:1:0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:kr:or:kec:standard:Tax:ReusableAggregateBusinessInformation:1:0 http://www.kec.or.kr/standard/Tax/TaxInvoiceSchemaModule_1.0.xsd">*
<ExchangedDocument>
<IssueDateTime>20110810133213</IssueDateTime>
<ReferencedDocument>
<ID>318701-0002</ID>
</ReferencedDocument>
</ExchangedDocument>
<TaxInvoiceDocument>
<IssueID>201106294100</IssueID>
<TypeCode>0101</TypeCode>
<IssueDateTime>20110810</IssueDateTime>
<PurposeCode>02</PurposeCode>
</TaxInvoiceDocument>
<TaxInvoiceTradeLineItem>
<SequenceNumeric>1</SequenceNumeric>
<InvoiceAmount>200000000</InvoiceAmount>
<TotalTax>
<CalculatedAmount>20000000</CalculatedAmount>
</TotalTax>
</TaxInvoiceTradeLineItem>
</TaxInvoice>
--2. sucess ----------- xml ---------remove namespace---------------------
<?xml version="1.0" encoding="UTF-8"?>
<TaxInvoice>
<ExchangedDocument>
<IssueDateTime>20110810133213</IssueDateTime>
<ReferencedDocument>
<ID>318701-0002</ID>
</ReferencedDocument>
</ExchangedDocument>
<TaxInvoiceDocument>
<IssueID>201106294100</IssueID>
<TypeCode>0101</TypeCode>
<IssueDateTime>20110810</IssueDateTime>
<PurposeCode>02</PurposeCode>
</TaxInvoiceDocument>
<TaxInvoiceTradeLineItem>
<SequenceNumeric>1</SequenceNumeric>
<InvoiceAmount>200000000</InvoiceAmount>
<TotalTax>
<CalculatedAmount>20000000</CalculatedAmount>
</TotalTax>
</TaxInvoiceTradeLineItem>
</TaxInvoice>
---------- program ------------
procedure insert_table
l_clob clob,
wellformed out boolean,
error out varchar2
is
l_parser dbms_xmlparser.Parser;
xmldoc xmldom.domdocument;
l_doc dbms_xmldom.DOMDocument;
l_nl dbms_xmldom.DOMNodeList;
l_n dbms_xmldom.DOMNode;
l_root DBMS_XMLDOM.domelement;
l_node DBMS_XMLDOM.domnode;
l_node2 DBMS_XMLDOM.domnode;
l_text DBMS_XMLDOM.DOMTEXT;
buf VARCHAR2(30000);
xmlparseerror exception;
TYPE tab_type is Table of xml_upload%ROWTYPE;
t_tab tab_type := tab_type();
pragma exception_init(xmlparseerror, -20100);
l_node_name varchar2(300);
begin
l_parser := dbms_xmlparser.newParser;
l_doc := DBMS_XMLDOM.newdomdocument;
dbms_xmlparser.parseClob(l_parser, l_clob);
l_doc := dbms_xmlparser.getDocument(l_parser);
l_n := dbms_xmldom.makeNode(l_doc);
l_nl := dbms_xslprocessor.selectNodes(l_n, '/TaxInvoice/TaxInvoiceDocument');
FOR cur_tax In 0..dbms_xmldom.getLength(l_nl) - 1 LOOP
l_n := dbms_xmldom.item(l_nl, cur_tax);
t_tab.extend;
t_tab(t_tab.last).ed_id := '5000000';
dbms_xslprocessor.valueOf(l_n, 'IssueID/text()', t_tab(t_tab.last).tid_issue_id);
dbms_xslprocessor.valueOf(l_n, 'TypeCode/text()', t_tab(t_tab.last).tid_type_code);
END LOOP;
FORALL i IN t_tab.first .. t_tab.last
INSERT INTO xml_upload VALUES t_tab(i);
COMMIT;
dbms_xmldom.freeDocument(l_doc);
wellformed := true;
exception
when xmlparseerror then
--xmlparser.freeparser(l_parser);
wellformed := false;
error := sqlerrm;
end insert_table;

l_nl := dbms_xslprocessor.selectNodes(l_n, '/TaxInvoice/TaxInvoiceDocument');try to change as follow
l_nl := dbms_xslprocessor.selectnodes(l_n,'/TaxInvoice/TaxInvoiceDocument','xmlns="urn:kr:or:kec:standard:Tax:ReusableAggregateBusinessInformation:1:0"');Edited by: AlexAnd on Aug 17, 2011 12:36 AM

How can I find the all path available for a MPLS VPN in SP network

How can I find the all path available for a MPLS VPN in SP network between PE to PE and CE to CE?

Hi There
If we need to find all the available paths for a remote CE from a local PE it will depend upon whether its a RR or non-RR design. If the MP-iBGP deisgn is non-RR the below vrf specific command
sh ip bgp vpnv4 vrf "vrf_name" will show us the MP-iBGP RT for that particular VPN. It will show us the next hop. Checking the route for same in the Global RT will show us the path(s) available for same ( load-balancing considered) .Then we can do a trace using the Local PE MP-iBGP loopback as source to remote PE's MP-iBGP loopback to get the physical Hops involved.
However if the design is RR-based there might be complications involved when the RR is in the forwarding path ie we have NHS being set to RR-MP-iBGP loopback and the trace using the Local PE MP-iBGP loopback as source to remote PE's MP-iBGP loopback will get us the physical Hops involved.
If we have redundant RRs being used with NHS being set then the output of sh ip bgp vpnv4 vrf "vrf_name" will show us two different available paths for the remote CE destination but just one being used.
RR-based design with no NHS being used will always to cater to single path for the remote CE detsination.
So in any case the actual path used for the remote CE connectivity would be a single unless we are using load-balancing.
Hope this helps you a bit on your requirement
Thanks & Regards
Vaibhava Varma

How can I extend the MRP Areas?

How can I extend the MRP Areas of a material for different warehouses by LSMW? Is there a specific field for it?

Ok, this is how my recording is built up (it ends with the same screen from the start):
RMMDDIBE 1000
    BDC_CURSOR                     SO_WERKS-LOW
    BDC_OKCODE                     =UCOMM4
    SO_MATNR-LOW                                        MATNR                matnr
    SO_WERKS-LOW                                        WERKS                plant
    BDC_SUBSCR                     RMMDDIBE
RMMDDIBE 1000
    BDC_OKCODE                     =CMDM
    SO_MATNR-LOW                                        MATNR                matnr
    SO_WERKS-LOW                                        WERKS                plant
    BDC_SUBSCR                     RMMDDIBE
    BDC_CURSOR                     SO_BERID-LOW
    PANE                           X
    SO_BERID-LOW                                        MRP_AREA             mrp_area
RMMDDIBE 0101
    BDC_CURSOR                     SDIBE_MASSFIELDS-XLGP
    BDC_OKCODE                     =SAVE
    SDIBE_MASSFIELDS-XDISGR        X
    MDMA-DISGR                                          DISGR                MRP_group
    SDIBE_MASSFIELDS-XDISMM        X
    MDMA-DISMM                                          DISMM                planningskenmerk
    SDIBE_MASSFIELDS-XMINBE        X
    MDMA-MINBE                                          MINBE                bestelpunt
    SDIBE_MASSFIELDS-XDISPO        X
    MDMA-DISPO                                          DISPO                Mrp controller
    SDIBE_MASSFIELDS-XDISLS        X
    MDMA-DISLS                                          DISLS                lotzsize
    SDIBE_MASSFIELDS-XBSTFE        X
    MDMA-BSTFE                                          BSTFE                fixed lotsize
    SDIBE_MASSFIELDS-XSOBSL        X
    MDMA-SOBSL                                          SOBSL                special procurement key
    SDIBE_MASSFIELDS-XLGPRO        X
    MDMA-LGPRO                                          LGPRO                issueing storage loc
    SDIBE_MASSFIELDS-XLGFSB        X
    MDMA-LGFSB                                          LGFSB                stor location external procurement
    SDIBE_MASSFIELDS-XPLIFZ        X
    MDMA-PLIFZ                                          PFLITZ               planlevertrijd
    MDMA-PLIFZX                    X
RMMDDIBE 1000
    BDC_CURSOR                     PA_PROSA
    BDC_OKCODE                     =ONLI
    SO_MATNR-LOW                                        MATNR                Matnr
    SO_WERKS-LOW                                        WERKS                plant
    PA_PROSA                       X
    BDC_SUBSCR                     RMMDDIBE
    PANE                           X
    SO_BERID-LOW                                        MRP_AREA             mrp_area

My time capsule backup space is full yet, how can i extend the backup space?

how can i extend the backup space?

Two possibilities:
Add a new USB hard drive to the Time Capsule and start a new full backup and move forward from that point.
(Unfortunately, it is not possible to have Time Machine simply continue backups on a new drive. You have to start over with a new full backup.)
Or, if you decide that you really do not need all the old backups on the Time Capsule, the disk can be erased and you can start over with a new full backup and move forward.

How can I extend(resolve) a Path with a Stream of String

Similar Messages

Maybe you are looking for