How can I generate a staircase waveform in Labview

Hello,
How can a staircase waveform be created in Labview. I have attached the waveform needed.
Ams
Attachments:
staircase.xls ‏16 KB

A waveform typically has a constant time increment between points. Your xls example has two y values for each even timepoint so to reproduce your example directly would be a bit tricky. Attached is one possible very simple solution that has a constant dt.
Modify as needed.
Message Edited by altenbach on 12-17-2006 10:36 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
staircaseII.png ‏18 KB
staircaseII.vi ‏14 KB

Similar Messages

How Can I generate 2 different WaveForm in the same time

Hello,
I use a NI 6733 card and measurement studio 8 with MFC class.
I would like to generate 2 different waveform in the same time on 2 diffrent analog output channel.
I would like to know how can i do that bescause I succeed to generate one wafeform on one channel but not the second.
I would like to create 2 task one per analog output channel and waveform and launch the task in the same time.
I use the buffer FIFO and I think I have a probleme to share the buffer between the to different channel.
thank you for your attention.

Hello,
This corresponds of the third case detailed in this KnowledgeBase. You have to use one task with two channel, and feed it with your two independant waveforms (at the same sampling rate).
Cordially,
.mrLeft{float:left} .mrInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898}
Mathieu R.
  CTD - Certified TestStand Developer / Développeur TestStand Certifié
  CLAD - Certified LabVIEW Associate Developer

How can i generate variable pulse waveform using PWM outputs of 7344.

Hi
I want to generate a pulse waveform using the pwm outputs of 7344. How can i very the frequency of the PWM programatically.

If you are programming in LabVIEW, you can use the Configure PWM Output VI to set up the frequency of the pulse train. If you are in any other language, you can use the NI-Motion API and call the flex_configure_pwm_output function to achieve the same result. Please refer to the NI-Motion C reference help that gets installed with the NI-Motion 6.0 driver or follow this link:
http://digital.ni.com/manuals.nsf/websearch/92003B670CC3CB3F862567C800755B95?OpenDocument&node=132090_US
for more information on this function.

How can I generate a map file with LabVIEW?

We wish to use a product which inserts code into our executable to prevent tampering with it by crackers. The program, however, takes the executable file, as well as the map file (which is commonly generated by c++ compilers) and uses the map file to determine where in the exe the critical routines that need protection are at. I can not, however, determine how to create such a map file for a LabVIEW generated executable. Is there a special build option I need to invoke?

Yes, I'm familar with NI's licensing technology, having talked with someone (you, Dennis, I believe) about it before. The problem we have is our software is sold to factories in China where there are no internet connections. We have a physical key 'dongle' which must be present in order for the executable to be willing to run. However, it appears that people are taking the executable which LabVIEW creates and they are editing it, probably by using a a debugger and tracing to the the code which checks for the dongles presence and bypassing it. To my knoweledge, NI's products don't do anything to prevent this, right?
We found a company which sells a product that encryptes, checksums, etc... an executable file, but it needs to know the layout of functions in the exe in order to determine which areas to focus the obfuscation on. They were sort of matter of fact when they said it needs the exe and the map file, as if they expected any language which produced an exe could produce a map file.

How can i generate AMI line codes in LabView signal express?

i wish to conduct a project that uses AMI line codes. but i have a hard time using signal express to generate it. can anyone help me with that?

Hello Barry,
That is really a problem, in LabVIEW, we can only convert vi to the previous version, I have version 7.1 and so I can only convert to version 7.0 and you cannot open this too.
But I think that it's very easy to do what I'm trying to explain you.
Go to the cluster group in the functions pallete. Place an unbundle by name function in the diagram and connect it to the data that's comming out of the FFT Power spectrum vi - the pink (or watever) wire.
Click in the white part of it (it should contain something like f0), choose magnitude.
This is now an array that you can connect to the peak detector function.
Take care about the threshold and width parameters of the peak detector.
Take a look at your signal and decide the amplitude and width of the peaks you want to detect. The threshold is the amplitude above what you consider as a peak, the width is a little bit more complicated - to begin, 3 or 4 should be a good number if you signal is not too noisy - bigger widths will somehow do a kind of a low pass filtering to your signal.
The position output of your peak detector is an array of locations where your peaks were found.
Keep in mind you are now working in frequency domain and that position means something in the frequency domain.
The array you placed as input of the peak detector is an array of points starting in f0 and separated by df (the other elements of the cluster).
So to calculate the real value of the peaks, you have to multiply them by df and add them f0.
Sorry by the big text and sorry if I went too much in detail,
Hope it helps,
Paulo

How can i print out the waveform chart?

hello everybody,
how can i print out the "waveform chart". can i do it just push the button. ( example; stop button is stop the program etc..)
i checked the NI examples but i can't understand. i'm new to the Labview.
pls help me.
i added the my program
look forward your reply
regards from turkey...
Message Edited by hknmkt on 05-29-2008 04:15 AM
Attachments:
29.05.2008_11.vi ‏37 KB

hi jim,
i tried the program but it's not running. When i run the program, it's print out without run the program
i added the printed file.
look forward your reply
hakan
Attachments:
error8.JPG ‏8 KB

How can I Generate two different reports from single execution of Test cases in NI teststand

Hi,
My requirement is to generate two different reports from NI teststand. One for the Logging of error descriptions and the other report is by default generated by the Teststand. How can i generate a txt file that contains error descriptions other than that mentioned in the default report?
Solved!
Go to Solution.

Do you need to do that just for these two sequences but not for other sequences? I don't see a problem to use SequenceFilePostStepRuntimeError. Create this callback in both sequence files and configure them to log into the same file. SequenceFilePostStepRuntimeError callback is called after each step of the sequence file if it has runtime error. You can access the calling step error information via RunState.Caller.Step.Result.Error property. Take a look to attached example.
The "other way" is useful if you need to log errors not for every step of the sequence file, but for some of them. This is more complex, because you need to create a custom step types for these steps. For the custom step you can create substeps (post-step in your case) which will be executed every time after step of this type executed. Then, this is you job to determine if error happened in the step, acces to step's error information is via Step.Result.Error property.
Also, be aware that step's post-expression is not executed in case of error in the step.
Sergey Kolbunov
CLA, CTD
Attachments:
SequenceFilePostStepRuntimeError_Demo.seq ‏7 KB

How can I generate SSL Keys from a Oracle 9iAS server version 1.0.2.2.0

How can I generate SSL Keys for use on Oracle 9iAS server
version 1.0.2.2.0. I have tried using the open_ssl method but
was unsuccessful.

<?xml version="1.0" encoding="UTF-8" ?>
<nodes>
<node>
<category_id>3</category_id>
<parent_id>2</parent_id>
<name>Mobile</name>
<is_active>1</is_active>
<position>1</position>
<level>2</level>
<children>
<node name="Nokia" category_id="6" parent_id="3" is_active="1" position="1" level="3">
<node name="Nokia N79" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
<node name="Nokia N95" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
<node name="Nokia N97" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
</node>
<node name="Samsung" category_id="7" parent_id="3" is_active="1" position="2" level="3">
</node>
</children>
</node>
<node>
<category_id>4</category_id>
<parent_id>2</parent_id>
<name>Laptop</name>
<is_active>1</is_active>
<position>2</position>
<level>2</level>
<children></children>
</node>
<node>
<category_id>5</category_id>
<parent_id>2</parent_id>
<name>Monitor</name>
<is_active>1</is_active>
<position>3</position>
<level>2</level>
<children></children>
</node>
<node>
<category_id>8</category_id>
<parent_id>2</parent_id>
<name>Camera</name>
<is_active>1</is_active>
<position>4</position>
<level>2</level>
<children></children>
</node>
</nodes>
Is this correct format to create dynamic menu?

How can we generate the reports in html or text file formats?

Hi,
Is there any package that can help in creating HTMLDB reports in .txt files or .html files? (Similar to TEXT_IO in Oracle Forms)
How can we generate the reports in html or text file formats from HTMLDB?
Thanks in Advance
Renjith

Hello all.
Bi Publisher is great, but has a very high price tag. It's even more expensive than Forms & Reports Services. We are considering APEX to replace Forms & Reports on the web, but the reporting limitations are still a problem.
I wonder if there is another option.
Thanks

How can we generate the report of backup,tablesapcefrom OEM / RMAN

How can we generate the report of backup status,tablesapce(usedf,free space) for all the databases from OEM / RMAN
1.)we need generate the report of tablespace used,free, archive...
2.)How can we generate the Backup status report also

user13584223 wrote:
How can we generate the report of backup status,tablesapce(usedf,free space) for all the databases from OEM / RMAN
1.)we need generate the report of tablespace used,free, archive...There are DBA_* views that expose the necessary information. They are documented in the Reference Manual.
2.)How can we generate the Backup status report alsoThere are rman commands that give that. They are documented in the Backup and Recovery User's Guide.
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to [url tahiti.oracle.com]tahiti.oracle.com.
Locate the link for your Oracle product and version, and click on it.
You are now at the entire documentation set for your selected Oracle product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab (for 10.x) or the "Master Book List" link (for 11.x) you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

How can I generate a table of contents from bookmarks

How can I generate a Table of Contents from bookmarks in Adobe Acrobat XI?

Something to try.
Rick Bostein provided a "Create Bookmark Report" Acrobat Action.
With this report as a PDF you could insert it at the start of your PDF document to serve as a "TOC".
Go here:
https://acrobatusers.com/actions-exchange
Scroll down some.
Be well...

How can I generate javadoc in PDF format?

Hi,
How can I generate javadoc in PDF format?
Thanks,
Fayezin

HTML to PDF with Java, using OpenOffice.org - example here: [http://www.dancrintea.ro/html-to-pdf/|http://www.dancrintea.ro/html-to-pdf/]
You can use OpenOffice.org, running as a server and command it remotely for document convertion.
Besides HTML to PDF, there are also possible other convertions:
doc --> pdf, html, txt, rtf
xls --> pdf, html, csv
ppt --> pdf, swf
Code example:
import officetools.OfficeFile; // this is my tools package
FileInputStream fis = new FileInputStream(new File("c:/test.html"));
FileOutputStream fos = new FileOutputStream(new File("c:/test.pdf"));
// suppose OpenOffice.org runs on localhost, port 8100
OfficeFile f = new OfficeFile(fis,"localhost","8100", true);
f.convert(fos,"pdf");
-----------------------------------------------------------------------------------------------------------------------------------------

How can we generate result set report?

how can we generate result set report ?means the out put of one query be the input of another query?how it is?

Hi
You have to use APD ( analysis process designer) to use results of one query as the input for the other queries.
Check this link
http://help.sap.com/saphelp_nw70/helpdata/en/49/7e960481916448b20134d471d36a6b/frameset.htm
Regards

I am using an NI PCI 6024 E board device for an analog output application. Can I generate two independent waveforms, one on each analog output channel?

I am using an NI PCI 6024 E board device for an analog output application. Can I generate two independent waveforms, one on each analog output channel? In attach I send a example of my vi to control one chanel, but i need to control both but with diferent waveforms.
Is the vi correctly programed to this propose?

Yes you should be able to do that. look at the signal generation examples shipped with LabView
You can create a 2 D array, with each row representing a wave form per channel. The number of points of the wave form (per row of the 2 D array) represent the number of points in the output buffer
The wave forms can have different amplitudes/shapes, and therefore they are independent in this sense.
However, you need to set the update rate,which is the same for both channels. The update rate together with number of points per buffer determines the frequency of the wave forms. This means the two wave forms will have the same frequency.
To have different frequencies, you need to have say, on wave form with one cycle per buffer, and the other waveform have 2 cycles
per buffer. in a case like that the frequency of the second channels is twice that of the first channel, and so on
The two wave forms are then not truly independent, they may have different amplitudtes/shapes, but related in frequency.

How can we generate a usage report

Hi Friends,
As my application is going to live, for that i want to usage report.
how can we generate a usage reopts ?
Thanks in advance

Hi,
Take a look at Usage Tracking; http://apex.oracle.com/pls/apex/f?p=44785:24:370475959673014::NO:24:P24_CONTENT_ID,P24_PREV_PAGE:4152,2
Good Luck,
Daan Bakboord
http://obibb.wordpress.com

How can I generate a staircase waveform in Labview

Similar Messages

Maybe you are looking for