How can I get a check box automatically checked when other check boxes are checked?

A little tongue twister there, but the attached image should clarify.
I'm trying to create a form to measure achievements. When all achievements are met/checked I want the green check box with a star to auto-check.
If not all achievements are checked, I want the orange check box to auto check...
Can I get this working by using export values?
Thanks!

I would use a custom JavaScript to count the number of check boxes whose value is not "Off" and set the final box on the result of the count.

Similar Messages

  • How can I get new tabs to automatically open when I click on a new site (rather than replace the existing page I am using)?

    For some reason when i click on to a new site or link, tabs no longer automatically open so if i forget to manually click on the little plus sign at the end of the tab strip, my new destination replaces where i currently was. This was not the case in the past and I cannot find where to reset this so that a new tab will once again auto create. !
    I tried options/tabs: open new windows in a new tab instead, but this did not fix the issue. Can anyone tell me what i need to do get firefox to create auto creat a new tab when i move to a new link rather than replace the one currently in use? Thank you!

    You can middle click a link to open that link in a new tab.
    *Open Link in New Tab: https://addons.mozilla.org/firefox/addon/open-link-in-new-tab/
    *Tab Utilities Lite: https://addons.mozilla.org/firefox/addon/tab-utilities-lite/

  • How can I get the book box in preferences' general tab to show up so I can start adding books to my ipad?

    How can I get the book box in preferences' general tab to show up so I can start adding books to my ipad? I am running OSX 10.9 and Itunes version 11.1.3(8) 64 bit.  I have tried re-installing Maveriks and reinstalling Itunes but the box for books is never there when I click on Preferences' General Tab.
    I am unsure what to do.  Please help.

    There is no "book box in preferences' general".
    There is a new iBooks application that appears on Mavericks' dock.  It looks like this:
    Go there to add books from your Mac to your iPad.

  • How can I get Mail to stop automatically opening on startup of my MacBook?

    How can I get Mail to stop automatically opening on startup of my MacBook Pro? It's not in my startup items folder. But it auto-opens every time I boot up

    In System Preferences / General make sure the Restore Windows ...... is unchecked.
    Also uncheck in the shutdown dialog box

  • How can i get a beat box in garage band

    How can I get a beat box(drums) in garage band?

    Do you want to record yourself beatboxing? Or are you looking for an effect that sounds like a beatboxer? For the latter: there is a "Human Beat Box" instrument in the Vocals Jam Pack.

  • How can I get a small window to open when a link is clicked (AS2)

    Hi i,m developing a HTML site and used one animated flash button(AS2) I want a small sized window to open when a user clicks on a button.
    The window will contain information that i want to display.It dosnt require a normal 800x600 window to open. I just want a 1/4 size of 800x600 etc. Is this possible and if so how.
    I havnt done this before
    Thanks
    Manoj

    HELLO NED,
    I WAS RECEIVING MANY MAILS FROM YOU, BUT I DON'T UNDERSTAND WHY DOESN'T RELATED WITH MY PETITION, I SEND
    TO YOU AGAIN MY QUESTION, AND IF YOU CAN HELP ME I APPRECIATED VERY MUCH LET ME KNOW.
    THIS IS MY QUESTION....."ABOUT DATAGRID AS3
    Hello Ned, I appreciate very much your soon answer, I believe you have understand me, but how can I do that? could you give some help? This is part of the code and this is the function that I use
    var url: String = "xmls/rests.xml";
    var req:URLRequest = new URLRequest(url);
    var myLoader:URLLoader = new URLLoader();
    myLoader.addEventListener(Event.COMPLETE, completeHandler);
    myLoader.load(req);
    function completHandler(event:Event):void {
           var myLoader:URLLoader = event.currentTarget as URLLoader;
           var xmlDP:XML = new XML (myLoader.data);
           XML.ignoreWhitespace = true;
           dp = new DataProvider(xmlDP);
           dp = sortOn("name", Array.CASEINSENSITIVE);
           dDg.dataProvider = dp;
           aDg.addEventListener(Event.CHANGE, changeHandler);
           function changeHandler(event:Event): void {
                var thisItem:Object = eve.target.selectedItem;
                descripTa.text = thisItem.description;
                aUI.source = (thisItem.image);
                preloader_mc.visible = true;
    My intention is that when a button from a main (swf) loads the swf it displayed the first selected item with a image (UILoader) and the description (TextArea)
    Thanks in advance Ned
    Joselyn             .................."
    THANKS AGAIN NED
    REGARDS
    JOSELYN
    Date: Thu, 13 Oct 2011 07:49:02 -0600
    From: [email protected]
    To: [email protected]
    Subject: How can I get a small window to open when a link is clicked (AS2)
    Re: How can I get a small window to open when a link is clicked (AS2) created by Ned Murphy in Flash Pro - General - View the full discussion
    Look at the Methods section and choose whichever suits your needs, the first one listed does not.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3969302#3969302
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3969302#3969302. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Flash Pro - General by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • How can I get my books that I download from the Library that are WMA files into my I tunes so I can listen to them

    How can I get my books that I download from the Library that are WMA files into my I tunes so I can listen to them. They have a ton of books but I can only listen to them from my windows media player and I wouldlove to download to my I pod but I have tried everything I can think of it they won't go over.  Someone said all I had to do was copy them over and they would convert but I can't even get them to copy.  Thanks.

    Well it started happening AGAIN with my 2nd IPod. No matter what I did, it Itunes would NOT restore it!
    I finally installed Itunes on my hubby's PC at work and managed to get it restored there.
    Apparently, there must be some sort of compatibility issue with the windows version of Itunes and some other piece of software on my pc.
    And one more important thing! I had to follow the instructions in the other thread that talks about how to correctly uninstall itunes and quicktime, in order to completely eliminate ALL traces of my "first" ipod's existence so it wouldn't demand that I restore it.
    I think the software got "confused" and thought when I connected my 2nd ipod, that it was the 1st and that it still needed to be restored.
    Basically, this is just POORLY written and POORLY tested software!

  • How can I get my iPod to play noise when it says my headphones are in but they arnt and I can't get it to play music with out my headphones in ?

    How can I get my sound to play my iPod says my headphones are in all the time and they arnt so it will only play sound when my headphones are in

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem..
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • How can I get the cd that was provided when I bought the book dummies for bass guitar to play on my ipad thanks

    How can I get the cd that was provided when I bought the book bass guitar for dummies from iTunes to play on my ipad.probably someone should provide me with a file or download?thanks

    You need to import the CD into iTunes on your computer and then sync the tracks to your iPad.
    Regards.

  • How can I get rid of a 1202 error when downloading products from itunes

    How can I get rid of an 1202 error when downloading products from itunes?

    You have probably downloaded the Norton program which is one of the least desirable helpmates you can invite in.
    Read this thread and follow the suggestions by Thomas R, one of our gurus in this field.
    https://discussions.apple.com/message/20005609#20005609

  • How can I get my LT monitor to sleep when I have an external display connected, If I close the lid both displays go out

    How can I get my LT display to sleep when I am using another external display, right now if I close the lid both of them go to sleep?

    This is called Clamshell mode,  to operate with the lid closed you need:
    Requirements for closed display mode:
    Power adapter
    External keyboard, mouse, or trackpad
    External display
    Here are the details:
    http://support.apple.com/kb/ht3131
    Regards,
    Captfred

  • How can I get my instructional text to display when I open the pdf?

    I have some fields which I have set up which have help/instructions for completing the information required.  This is a questionnaire.  When I save it as a pdf, the instsructional text does not display.  I would really appreciate if someone can tell me how to fix this.

    Thanks for taking the time to respond to my query.  The text does not display when I hover my mouse over it.
    cheers    Deborah Frow
          From: Ajlan huda <[email protected]>
    To: Deborah Frow <[email protected]>
    Sent: Monday, 12 January 2015, 5:24
    Subject: Reply marked as helpful on How can I get my instructional text to display when I open the pdf?
    |
    How can I get my instructional text to display when I open the pdf?
    Ajlan huda marked SumitV's reply on How can I get my instructional text to display when I open the pdf? as helpful. View the full replyMarked as helpful:Hi Pacific Immigration, In Adobe Acrobat/ Adobe Reader there is no “?” shown for help, but if you mouse over the field for 1-2 seconds the Help text is shown.
    Following How can I get my instructional text to display when I open the pdf? in these streams: Inbox
    |

  • How can i get the small sircul contact pic when I receive or make calls instade of the full screen pic ?? Cannu help me plz

    How can i get the small sircul contact pic when I receive or make calls instade of the full screen pic ?? Can u help me plz

    Settings you make in ACR for a Raw file are written to the separate XMP side car file. (The Camera Raw preferences has this set by default and to my opinion it should stay so, but the other option is to save them in a central database)
    However, opening the same file in ACR and make new adjustments the previous settings are overwritten by the new ones. You can save them separately but that would be a hell of a job. If you want to be on the safe side you should make a proper back up of the whole folder (be sure to have the XMP files included, by default those are hidden files in Bridge) before someone else starts playing with the settings. However, you can always go back to the default version using the option in the little menu icon next to the name op f the panel (first panel is Basic). click on the icon and from the provided menu choose 'Reset Camera Raw Defaults' to go back to the originals.
    I don't use jpeg in ACR very often but I believe ACR settings for jpeg and tiff are written in the XMP data in the file itself instead of a separate XMP file. You can revert to default or make new settings that also overwrite the older settings.
    Making adjustments in ACR shows the results in Bridge (it uses the XMP data for the preview) but to make it visible in other apps you also have to save them in Photoshop itself to make the changes persistent so that mail and print reflect your settings.
    So basically, let her play with the files and either chose the option to save the files (bottom left in ACR Window and choose the wanted provided options or open and save them in Photoshop to get the proper result. And if you want to be on the safe side let here use her own copies and keep the originals to your self.

  • How can I get my editing changes to stay when uploading to Facebook?

    How can I get my editing changes to stay when uploading to Facebook? For example, I have a picture that I have adjusted the sharpness,highlights and I De-noise it,however,when uploaded it to Facebook, the changes I made are not reflected in the picture.

    exactly how are you uploading?
    LN

  • Have set Yahoo Mail as my mailto yet when I try to "send a link" I get a Yahoo sign in page and am then taken to my inbox. How can I get an email box to send the link?

    I can't get Firefox to send either photos out of Picasa or "send a
    link" using my Yahoo!Mail option. Have set Yahoo as my default
    and have set Yahoo as my mailto using tools/apps. When I
    use "send a link" I am sent to my Yahoo sign in page and it takes
    me to my inbox. How can I get a blank email form to come up?

    Typing in additional text seems to get the job done.  This seems to be a feature of the latest IOS update, I have never had the problem before the last update.
    I use the box with the arrow just to the left of the URL block at the top of the page to send myself links to pages of interest.  Adding the extra text seems like a pointless step, but it does work.
    Thanks.

  • How can you get the mail boxes in yahoo onto the e.mail app

    How can you get your yahoo mail boxes onto the e.mail app on an IPad mini?

    Go to the Settings App
    Pick Mail, Contacts, Calendars
    On the right side you'll see under the Mail section "Add Account”
    Pick that and fill out the requested information

Maybe you are looking for