How can I get an audiobook's playback position synced between Mac and iPhone?
I have several Audible audiobooks, both on my iMac and on my iPhone. I listen to the audiobook on either the computer or the phone, depending on the circumstances. Both the iMac and the iPhone will independently remember the playback position within the audiobook, but I cannot get them to sync those playback positions to each other. So if I'm on chapter 2 on the iMac, listen for a couple of hours, and end at chapter 4, then the Mac will remember the correct playback position when I return to the book, but if I sync the iPhone to the Mac, and check the audiobook on the phone, it is still at the playback position it was the last time I listened to the book on the phone. Should the playbook position in the audiobook sync when the phone is synced to the computer via iTunes? I've tried both wired and wireless syncs, and that doesn't seem to make a difference on my case. Should this work, and if so, is there a particular setting that I'm missing?
I am tracking the movement of various objects by subtracting the current image from the previous image and displaying the result. Anything that moves is white and anything that doesn't is black. I then have vision assistant give me a list of particles and their pixel positions based on certain criteria. I then use the data from my two cameras pointing at 45 degrees inward in order to triangulate the object's 3-D position in space (this takes a few steps). Then I use the frame rate of the camera and the scalar distance between an object in multiple frames to determine its scalar and vector velocities. All of this is done in real time.
I was originally having issues with the pixel positions but have since wrote a vi that interprets a matrix of the pixel positions which then feeds them into my position/velocity vi.
The vi I attached is built to work with my "bitflow alta frame grabber" so feel free to ask questions if anything is not understood.
My new task has been to develop a way to only track one object at a time, and have that object be the same object in both cameras.
Questions or comments welcomed
Attachments:
continuous grab example_chad.vi 45 KB
Similar Messages
-
How can i get back my purchased items after a hard drive and iphone failure?
My itunes was loaded on my parents computer and the hard drive crashed. I didnt get round to backing up to my laptop and then my iphone crashed and removed everything. How can i get back my purchased items?
Downloading past purchases from the App Store, iBookstore, and iTunes Store
-
Cannot get messages to sync between mac and iphone
Just upgraded to the 5s, my iMessages now has my old Apple ID stored (thought the rest of the phone has the current apple ID) and will not let me change it to so it syncs properly with my Mac (using the up to date ID). Every time I try to get messages to send through the Apple ID, it tries to make me sign into the old ID, but does not give me a chance to change to the current ID. Any advice on how to do this?
Thank you!Welcome to the Apple Community.
First check that all your settings are correct, that notes syncing (mail and notes on a computer) is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the notes you are adding are added to your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by checking in accounts on an iOS device, or the left side panel in mail on a computer), non iCloud notes will not sync.
If you are sure that everything is set up correctly and your notes are in the iCloud group, you might try unchecking notes syncing (mail and notes on a computer) in the iCloud settings, restarting your device and then re-enabling notes syncing. -
In mail, my attachments, both photos and documents, appear in the body of the message. How can I get my attachments to appear as a separate attachment and not as part of the main message???? Thanks for your help, Karen.
softwater wrote:
...and costs $14.99
Yep! And if you absolutely need (or think you need) that functionality, it is worth every penny.
As Don already pointed out, exactly what the recipient sees will depend on how they've set up their machine and what unnecessary 3rd party apps they might've installed to display attachments the way they want.
In theory, that is true. In practice, Attachment Tamer will cause more of your messages to show up as plain-jane icons on the other end. The problem is, after all, people running Outlook 2003 and 2007. These people likely aren't doing many system modifications.
If I were you, I'd use the free solutions provided above, save my money and let my recipients decide how they will handle their mail.
I completely agree. -
i have made with iweb a website on my macbook, now i want to change it, through my imac, how can I get in the program , which is on the mac book. On both computer I have Lion
You need to transfer your domain.sites file from your MacBook to your iMac. This is the file where iWeb stores all info and can be found under User/Library/Application Support/iWeb/domain.sites.
Transfer this file from your MacBook to the same place on your iMac and double click the domain.sites file and iWeb will open it on your iMac and you can update your site from there too. -
Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????
It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this. -
when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resetting it?
What version of iTunes are you running on your computer? You need to update to the current version.
-
I have an iPad 2 and recently purchased an iPad mini. My husband will take over the iPad2. How can he get an icloud account for this iPad (eliminating me) and his iPhone5?
Delete your iCloud account on the iPad 2, then he can follow the instructions to create his own iCloud account on it:
http://www.apple.com/icloud/setup/ios.html
Then he can setup his own account on his iPhone. -
my old ipod has lots of music on it this was connected to a computer that was stolen, I now have a new ipod thats all connected with music on to my replacement computer, how can i get my old ipod music onto my new library and new ipod
Try these 2 User Tips...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991 -
How can i retrieve purchased audiobooks that were not synced (problem encountered during sync process)? My account shows the purchase history, but the apps are no longer displayed in itunes or on my ipad or iphone. I'm not very savvy with using iTunes - I don't think is very intuitive (unlike me:)). Any help would be appreciated.
ThanksHello mcegirl4,
Thanks for using Apple Support Communities.
Please refer to the instructions in the following article to assist in downloading those previous purchases from iTunes and the App Store:
Download past purchases
http://support.apple.com/kb/HT2519
Take care,
Alex H. -
My laptop got formatted and so did all my itunes information like music, contacts, and games. So how can I get all that back because if I just plug my iPhone into the laptop all my stuuf that was on my phone will be gone? help please
http://www.wideanglesoftware.com/touchcopy/index.php
-
My computer crashed and I lost everything. It was the only computer with Sync on it and I cannot get my recovery key: how can I get all my bookmarks from that Sync account? I have a ton of bookmarks/saved password and the only way to get on sync is create a new recovery key and lose all of my information.
Is there any way to get my stuff back without creating a new recovery key and losing all my old stuff?It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
Use your backup copy to put everything back. -
how can I get all of my music off of my laptop and onto an external hard drive? I bought a new hard drive for it but it got turned into a Time Machine drive... I want to have all of my music on the external hard drive, and NOT on my macbook pro. Thanks everyone
Hello lramospsych,
To move your iTunes media library to a different location, take a look at the article below to walk you through that process. Make sure that you have everything organized before you move everything over.
iTunes for Mac: Moving your iTunes Media folder
http://support.apple.com/kb/ht1449
Regards,
-Norm G. -
How can i get my data from an application that deleted from my iphone
how can i get my data from an application that deleted from my iphone????
Which application?
With many applications, when deleting the app the app's data is deleted with it. -
HT4623 How can I get a copy of 5.1.1 IPSW for my iPhone?
How can I get a copy of 5.1.1 IPSW for my iPhone?
You can't. Apple is no longer signing iOS 5
Maybe you are looking for
-
About using Bluetooth on My 2009 24inch Widescreen Apple iMac Computer.
i need to get info on My Apple iMac Computer does My Apple iMac Computer can Handle Bluetooth 4.0? cause I Wanted to get this New Mac App called Notifyr & it's also Available for Apple iPhone as a iPhone App you can read more about it here --> http:/
-
Licensing for this product has expired (I paid for CS4)
I bought Adobe Creative Suite 4 (Design Premium) in mid November 2008. After installing and entering the serial number, all was well until this morning. Now when I try to launch any CS4 application I am given the pop up: License Expired Licensing for
-
My external microphone isn't working, how do I fix that?
I have a new HP Pavilion g series notebook, and I also have an external microphone I use for singing, I had Best buys geek squad fix the settings so tha it would work, now a few updates have gone by and now it doesn't work again. I did some tweaking
-
Implementation costs SuS-SRM scenario (service procurement/web-based)
Hi out there, I am currently trying to rough-estimate the implemantation costs for a SuS-SRM scenario (service procurement - supplier enablement/web-based) with all the components it requires: software-wise: SRM with SuS and XI would be needed Hardwa
-
Why can't I read one of these properties?
This is just not the kind of problem I need with my cold fogged brain! I have this array collection [parentApplication.displayDraw.details]: (mx.collections::ArrayCollection)#0 filterFunction = (null) length = 1 list = (mx.collections::ArrayList)#1 l