How can I get gridlines to print on my template that I created in Numbers?

I am trying to create a template in Numbers and I want the gridlines to print. The drop downs for x-axis and y-axis under Chart inspector are shaded gray and are not able to be clicked on. How can I get those gridlines to print?

Suzy1107 wrote:
Its a spreadsheet that looks like excel, has two columns at the top and 49 rows at the left side
You seem to be looking in the Chart Inspector for formatting options for the table. Use the Table Inspector, or the Format Bar for Table Cell Border format options.
I have circled the border format controls in the Format Bar in the attached screen shot:
Regards,
Jerry

Similar Messages

How can I get rid of shimmer effect in videos that I create in iMovie?

How can I get rid of shimmer effect in videos that I create from photos in iMovie?

Well, not sure - so exactly what resolution do you use to shoot? Go in your camera settings and check. And, is there a settings to choose for regular/extra/fine/superfine quality? I shoot at the highest quality - period. My size/resolution is either widescreen or larger than what I need for the movie. My TV is HD 720p - that means the screen will display 1200 x 720 pixels in HD; if you have a 1080p, it'd be 1920 x 1080. So shoot in a size a bit larger than that because they can be adjusted down without any quality loss, but can't be made larger without significant loss of quality.
But,again, the problem usually doesn't start until you add movement, but camera quality has something to do with it as well. I know that a previous camera I had was not as good and a lot of my slideshows/movies didn't come out as perfect as I would have liked. So I bought a more expensive camera - shoots in full 1080 HD and I haven't had a problem since.
As for exporting a slideshow: finish it in Photo to Movie and export to desktop at highest quality (will take a while). Here is a screenshot of my export settings:
Once done, you can simply choose that movie by going to "import movies" in iMovie and navigating to the location (I usually save to desktop - easy to find).

Downloaded iTunes 11.0.2.26,the print CD jewel case does not print right,all the songs listed are printed in about a 1/2in. space,how can I get it to print right

Downloaded iTunes 11.0.2.26,the print CD jewel case does not print right,all the songs listed are printed in about a 1/2in. space,how can I get it to print right

I recently upgraded to itunes 11.0.1.12 and that fixed the CD Jewel Case Insert song titles problem. Thanks itunes. It's working great!!.

How can I get it to print output of inputstream?

Please forgive me for running two similar thread but the other thread ahs strayed from primal concern of coding.
Some help with the code please???
I have set up an inputstream and outputstream to the "ftp process" of java.lang.Runtime I have sent the command "dir" to ftp.
But How can I get it to print all the files etc of the "dir" sent to ftp process?
Also I have just read that it is perhaps better to buffer the STREAMS.
How do I do this for outputsteam? I think I have some clue to do for inputstream with bufferedreader?
import java.lang.*;
import java.io.*;
public class RuntimeFTP{
public static void main(String[] arg){
Runtime rt = Runtime.getRuntime();
String[] callAndArgs = { "ftp.exe", "jaguar.wmin.ac.uk" };
Process process = null;
OutputStream os = null;
InputStream is = null;
String login = "w0109699";
String password = "11041976";
String dircommand = "dir";
byte[] barraylogin = login.getBytes();
byte[] barraypassword = password.getBytes();
byte[] barraydircommand = dircommand.getBytes();
try
process = rt.exec(callAndArgs);
process.waitFor();
System.out.println("Process exit code is: " + process.exitValue() );
catch(IOException e)
System.err.println("IOException starting process!");
catch(InterruptedException e)
System.out.println("Interrupted waiting for process!");
try
os = process.getOutputStream();
os.write(barraylogin);
os.write(barraypassword);
os.write(barraydircommand);
catch(IOException io)
System.out.println("io exception write to outputstream");
try
is = process.getInputStream();
while (is.read() != -1)
How can I print the data to the user
i.e all the data obtained from the "dir" command sent to ftp?????????
catch(IOException io)
System.out.println("io exception read fron inputstream");

the above code does not work so I have abondaned it.
I want to integrate an ftp program into a program I am working on. I have scoured the net for reuse able code and come across a "t or Linlyn ftp program" which claims is easily integrate able into larger applications.
The problem is did does not seem to work and gives me errors. I would be grateful if someone could tell me why I am getting the error, here is the error:
C:\My_DL_Dap\ftp in java>appletviewer t.java
Warning: <applet> tag requires width attribute.
java.security.AccessControlException: access denied (java.net.SocketPermission j
aguar.wmin.ac.uk resolve)
at java.security.AccessControlContext.checkPermission(AccessControlConte
xt.java:270)
at java.security.AccessController.checkPermission(AccessController.java:
401)
at java.lang.SecurityManager.checkPermission(SecurityManager.java:542)
at java.lang.SecurityManager.checkConnect(SecurityManager.java:1042)
at java.net.InetAddress.getAllByName0(InetAddress.java:909)
at java.net.InetAddress.getAllByName0(InetAddress.java:890)
at java.net.InetAddress.getAllByName(InetAddress.java:884)
at java.net.InetAddress.getByName(InetAddress.java:814)
at java.net.InetSocketAddress.<init>(InetSocketAddress.java:109)
at java.net.Socket.<init>(Socket.java:118)
at Linlyn.ftpConnect(t.java:326)
at Linlyn.<init>(t.java:236)
at t.init(t.java:83)
at sun.applet.AppletPanel.run(AppletPanel.java:341)
at java.lang.Thread.run(Thread.java:536)
I would also be grateful if someone could try out the program and tell me if it works for them, then I could determine if it is because ftp clients are being blocked by my server. The ftp program is very small, here is the url:
http://www.afu.com/jdownload.html
1) compile the code
2) fill in everywhere it requests "your-server" "username" and "password"
3) to run appletviewer t.java

PDF's print two sided. How can I get them to print on single pages?

PDF's print two sided. There is no option shown. How can I get thelm to print on single pages?

1: Go into iTunes.
2: Right click on the song and choose 'Get Info' (or press cmd+i on a Mac).
3: In 'Info' change the album name to the one you want it to go into, when you start typeing it should automatically come up.
4: Check that the disk number and track number is correct. It should be automatic.
4: Press OK.
You should see it go into the album now.

Somehow my iTunes app has been put into the trash. How can I get this and all of the stuff that was in it back to my Application folder? I try to drag it out of trash, but it won't work.

Somehow my iTunes app has been put into the trash. How can I get this and all of the stuff that was in it back to my Application folder? I try to drag it out of trash, but it won't work.

Also, when I do try to drag it out of the Trash to put it back into Applications (on the Finder sidebar), it asks me to authenticate with the administration password. I enter it, and then a window appears saying that I can't do that because I do not have permission to modify iTunes. Please help.

How can I get a refund for an unwanted app that I just purchased?

How can I get a refund for an unwanted app that I just purchased?

Click here and ask the iTunes Store staff for a refund. Consider whether or not you want to do this now carefully first; if they grant one, you'll need a very good reason to get another from them.
(111524)

HT201302 Hi People! please help...I want to know how can i get photos from ipad to the computer, that were synchronized previously to ipad but from another pc that i dont have access anymore and these pics are now only found in this ipad and no other plac

Hi People!
Please help...I want to know how can i get photos from ipad to the computer, that were synchronized previously to ipad but from another pc that i dont have access anymore and these pics are now only found in this ipad and no other place.

Hi Alan,
Thanks for the help, but i've actually done that before.
It does not help, because it only shows the photos on the camera roll and do not show the photos synchronized with that pc that i dont have access anymore.
The photos/albums all appear on the ipad, i can see it without problems but i cant get them out of the ipad to save onto pc for backup.
And i reaaly need it, as it is the only place that i actually have these photos now...

When I switched computers my songs now cut off and don't play out. How can I get my songs back to play fully that I purchased from ITunes over the past years?

When I switched computers my songs now cut off and don't play out. How can I get my songs back to play fully that I purchased from ITunes over the past years?

Other people have been having similar problems with songs over the last few days, I assume that there has been a problem with Apple's servers.
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting those tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link.

I need in more lines of the Index some words in Bold text and some others in Kursiv text. How can i get it? It seems to me that either i can have all the Style in Bold Text or in Kursiv Text :(

I need in more lines of the Index some words in Bold text and some others in Kursiv text. How can i get it? It seems to me that either I can edit a Style only in Bold Text or in Kursiv Text
I make you an example to clear what I really need:
Index
Introduction
I. Leonardo's Monnalisa
II. Leonardo's Battaglia
Bibliography
Please HELP HELP HELP

What version of Pages are you referring to?
Basically if you are talking about the Table of Contents in Pages and want to have different character styles within paragraphs in the T.O.C. you will have to export the T.O.C. and bring it back in as text and change that.
Peter

How can I get the standard Adobe CS4 sample templates, like the photo slideshow? Thanks

I just got Flash CS4. I think it is supposed to have several categories of templates. I only have the advertising category. How can I get the standard Adobe CS4 sample templates, like the photo slideshow? I cannot find anyplace on the Adobe.com site for template downloads.
Thanks
Mark

I have the same question-- I don't see any template categories apart from "Advertising"-- where are they?
- Jesse

V5 How can I get the code from an itunes gifcard that got scraped off

How can I get the code from an itunes gifcard that got scraped off

Try Here > http://support.apple.com/kb/TS1292
If no joy...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

How can I remove a signature on a PDF file that I created using Preview on iMac computer??

How can I remove a signature on a PDF file that I created using Preview on iMac computer?? I inadvertently hit the icon on the Preview tool bar with an xS and a line through it. There is my signature in the middle of the PDF file I was editing. How do I get rid of it? Cannot select it. Cannot find any tools that allow me to delete it. The Preview documentation tells how to create and apply a signature, but not how to remove it. I think when a signature is added the doucment becomes locked from any editing.

Hey needadobehelp10,
Using Adobe Acrobat/Reader, you can simply change your PDF view settings under "View > Page Display > Single Page View"
Is this really you wish for?
Please let me know.
Regards,
Anubha

How can I edit material from 1 or more dvds that I created from my own filmed material in iMovie but which I no longer have in iMovie

How can I edit material from 1 or more dvds that I created from my own filmed material in iMovie but which I no longer have in iMovie

You need to 'reverse engineer' them :
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

How can I get my network printer to print in color?

I have a Dell 3110cn color printer on my network. Since I did the Maverick update the printer will no longer print in color only b&w. It's using a generic printer driver. I had no problems before the update. It's a great workhorse printer. How can I get this connected properly?

Bruce777 solved this for me, thank you Bruce! My printer now works perfectly on my new wifi network!
Bruce's instructions, for anyone else having the same issue:
- delete any previously set up printers
- scrub old hp software and update software to get the hp 2.8 drivers
- remove the usb cable from the printer if you have one connected
- reset the printer network to hpsetup (hold down the power button and press network button 2x and then cancel 3x, release power button.)
- print out the wireless network test report (hold down the network button and press the update button 2x). verify the network name / ssid is hsetup
- got to sys prefs > network and change the mac wireless network to hpsetup
- go to the sys pref > print scan
- add the HP 8000 printer
- click on the options and supplies button and click on the Show Printer Webpage
- click on the networking tab > wireless in the left pane > start network wizard and change the network from hpsetup to your network
- finish (this page may freeze up. close the browser)
- go back to the sys prefs and change the wireless network back to your networt
- go to the printer and print out the wireless network test report (press network button and update button 2x). Check that the SSID is your network
- go to sys prefs > print scan > select your printer > options & supplies > show printer webpage > network info (check ssid and compare to wireless network test report)
- try printing something to your printer. It might take a little time the first print.

How can I get gridlines to print on my template that I created in Numbers?

Similar Messages

Maybe you are looking for