How can i get into my daughters ipad when she cant remember the passcode

how can i get into my daugters ipad when she cant remember the passcode

You will need to restore your iPad from the same computer that you most recently synced to.
Read this: http://support.apple.com/kb/ht1212
If you can't do the restore then you will need to try recovery mode.
Read this: http://support.apple.com/kb/ht1808

Similar Messages

  • How can I get into my ipod 5th generation if I forgot the passcode?

    How can I get into my ipod 5th generation if I forgot my passcode?

    Forgotten Screen-Lock Passcode
    Connect the iOS device to your computer and try to make a backup
    iOS: How to back up
    Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store   
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • How can i get into my sons ipod touch since he forget his passcode?

    How can i get ito my sons ipod touch since he forgot his passcode??? need help

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code, then skip Step 9 and restore as New.

  • HT1414 How can I get into my iPod Touch when its disabled because I forgot the password?

    Hi,
    My name is Amanda Davis and my daughter, Sydney Davis, got an iPod Touch. A few days ago, she changed her password to what she thought was her name, but instead she changed to something else and she can't get into it. She tried to put her password in it and it locked her out every single time. Now it is disabled.

    1: Connect the device to your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.

  • Trying to organise video clips but can not find them in iphoto under Movies but do appear idvd under movies.How can I get into iphoto movies section to edit and organise the video clips

    In iphoto '08 in my Library section "Movies" doesn't show as a seperate folder so to find my video c;ips I have to go through 13,000 photos and yet in iDVD they do show up in the media area. How can I edit them and put them into specific files?

    Tell me if a video has been recorded on its side! or even upside down, can you turn it round the proper way?
    If you have Quicktime Pro you can rotate the video. There's a plugin for iMoive that can rotate clips.  Go to MacUpdate.com and do a search for "rotate video" and you'll find several apps that can do the job and the plugin: MacUpdate: Search for '+rotate +video'
    OT

  • How can I get into my iTunes if I don't know the answers I put I in for the security questons

    How can I change security questions since I don't know the answers to the ones they are Asking me?

    http://support.apple.com/kb/ht1808

  • How Can I get My iMac Running again when its stuck in the Loading boot up Screen?

    My 2010 21.5 Imac wont  stop loading, The wheel just keeps spinning and it doesn't even boot in safe mode. the only thing i can do is get into single user mode. My Mac doesn't respond to command + r. I am able to pull up a disk to boot from but it doesn't show a recovery disk, only "Macintosh HD", when i click it I'm back at the apple logo screen with spinning wheel.At this point i want to do one thing and that is factory reset the computer. a fresh install, delete everything, NO BACK UPS. I don't have the install CD (This Computer had a previous owner). If i were to buy a copy of the OS X from the apple store (I believe my computer was running 10.6.8, Im not 100%sure and i dont now how to find out at this point) would i be able to even put the CD in the disc drive? would it read the CD even though its stuck in the boot up(loading) screen? How would i get it out if the Drive doesn't read the disk? Do I have Other options? Thanks guys!

    You are using Snow Leopard. There is no COMMAND-R for a startup. That's for Lion or later.
    Call Apple and purchase replacement discs for your model. You cannot use the retail version of Snow Leopard on your model. You have no other options unless you have the original discs that came with the computer. When you get the discs:
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • HT1689 How can I change my security questions/answers as I cant remember the answers to my old questions and it keeps locking me out

    How can I cahange my security questions and answers?...I keep getting locked out as I cant remeber the answers to the questions I originally set.

    Kappy's Some Solutions for Resetting Forgotten Security Questions
    (only solutions)

  • HT1414 How can I get into my daughters iPod  5 when she has forgot the code?

    I have tried this and when the process is finished all is restored and as I started.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • How can I get into my account that I do not have the password for

    A new Photoshop serial number was created for me earlier.  It was put in an old account that was still on Adobe's books and I do not have a password for it.  My current account has all of my software licenses but does not have the new one that replaced what is listed in my main account.  

    Customer service can merge both of your accounts into a single one.
    Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
    Click on the link below, and after that click on "Still need Help? Contact us."
    Then on the next page, click Chat
    There is also a phone option. 1 (800) 833-6687
    http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

  • HT4061 how do i get into my iphone 4 when i have forgotten the password?

    I have locked my iphone 4 and cannot unlock it for i have forgot my password. I am asking for help on how i can unlock it again. i have tried asking frineds and they don't know, ither my parents. please help...

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • How can I get into my ipad if I don't have the password or the original computer to reset or resynch? It's locked now since the passwords I thought are not correct. What can I do?

    How can I get into my ipad if I don't have the password or the original computer to reset or resynch? It's locked now since the password I thought was set is not correct. What can I do to get back in or reset? Thanks

    http://support.apple.com/kb/ht1808

  • I forgot my passcode, how can i get into my iPad?

    I set a passcode and cannot seem to remember it.  How can I get into my iPad without resetting it?

    Force iPad into Recovery Mode
    1. Turn off iPad
    2. Connect USB cable to computer only
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times.

  • HT1349 My iPad is disabled. I have only just been able to find the serial number on the back of my product by using a magnifying glass but even now from "Support" I get an unknown serial number advice. How can I get into it?

    My iPad is disabled. I have only just been able to find the serial number on the back of my product by using a magnifying glass but even now from "Support" I get an unknown serial number advice. How can I get into it?

    Explain exactly what happended - disabled how - and why are you trying to read the serial number? So that you can use it on this site?
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • How can I get into IPF on my iPad?

    How can I get into my IPF on my ipad.  It says I need to log in but there isn't a place to log in??
    Thank you.

    I just double checked this using the IPF app, download it for free, just Tap on login and fill in the necessary info.
    Select "Save login"  if you wish.

Maybe you are looking for

  • How can I publish my site on host

    This is my first site , so I do not know how to publish my site on the host. I buy host from IX WEB HOSTING. I use Dreamweaver 8.0 to design my site. Thanks for any help.

  • 'Description Field' - only shows in Contract Screen not Quotation Screen

    Hi All, I am in the process of creating some functionality where an Opportunity is created in CRM, then Quotations are created from these Opportunities... The winning Quotation is released through to R/3 and then a Contract is created from that Quota

  • Query relating to posting key

    hii all i am new in sap. I have a very basic question. my  question is when we post any transaction, how the system determine the posting key determine automatically? Suppose I am posting a customer invoice  through f-22. where system autumatically d

  • SboGuiApi.Connect(sConnectionString)

    I have a problem in establishing a connection to SbouiApi My command line argument returns an exception The connection string is : "C:\Program Files\SAP\SAP Business One SDK\Samples\UDO\BlanketAgreement"|"C:\Program Files\SAP\SAP Business One\AddOnIn

  • How can I put folders within folders in alphabetical order in MAIL?

    In Mail I have several folders covering my major areas of work.  in each of these folders I may have 10 to 50 subfolders,  which represent my clients. All I ant to do is put these sub-folders in alphabetical order so I can locate them rapidly.  Can I