How can i handle error in my apex form

Hi experts,
I have designed a form where i record values.I have a create button and when i press it without entering any values i have the following error. How can i handle tat error so that if i dont enter any values i have an error message being displaying prompting the user to enter values
ORA-01400: cannot insert NULL into ("LOTTO_BI"."HOURLY_SALES"."ACT_AMT")
Error Unable to process row of table HOURLY_SALES.

As far as I understand your problem you just have to add a validation to your page processing.
In the third step when creating a validation you can choose "Item not null".

Similar Messages

In call transaction how can we handle error records.

hai..tellme how can we handle error records in call transaction..we can get error records into one flatfile ok...then we have to execute the same bdc program with dat flat file (error records) once again...is it wright ..

Hi,
check this program u will get idea
seee this prog. its will help u .
copy and run this prog.
TYPES : BEGIN OF t_disp ,
vendorno(9),
compcc(13),
purchorg(14),
accgroup(15),
title(7),
name(5),
country(8),
ordcurr(14),
END OF t_disp.
TYPES : BEGIN OF t_err,
msgtyp LIKE bdcmsgcoll-msgtyp,
l_mstring(250),
END OF t_err.
DATA: i_disp TYPE STANDARD TABLE OF t_disp,
wa_disp TYPE t_disp,
i_err TYPE STANDARD TABLE OF t_err,
wa_err TYPE t_err.
data definition
Batchinputdata of single transaction
DATA: bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
messages of call transaction
DATA: messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
error session opened (' ' or 'X')
DATA: e_group_opened.
message texts
TABLES: t100.
PARAMETER : p_file1 LIKE ibipparms-path,
p_cmode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
*selction screen.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file1.
AT SELECTION-SCREEN ON p_file1.
IF p_file1 IS INITIAL.
MESSAGE 'FILE IS NOT FOUND' TYPE 'E'.
ENDIF.
START-OF-SELECTION.
PERFORM f_disp_file1.
END-OF-SELECTION.
PERFORM f_disp_errs.
*& Form F_DISP_FILE1
text
--> p1 text
<-- p2 text
FORM f_disp_file1 .
DATA: l_filename1 TYPE string.
MOVE p_file1 TO l_filename1.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = l_filename1
filetype = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = i_disp
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*? prepare BDC data
DELETE i_disp INDEX 1.
LOOP AT i_disp INTO wa_disp .
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
wa_disp-vendorno.
'ztest_1'.
PERFORM bdc_field USING 'RF02K-BUKRS'
wa_disp-compcc.
'0001'.
PERFORM bdc_field USING 'RF02K-EKORG'
wa_disp-purchorg.
'0001'.
PERFORM bdc_field USING 'RF02K-KTOKK'
wa_disp-accgroup.
'0001'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'LFA1-ANRED'
wa_disp-title.
'Mr.'.
PERFORM bdc_field USING 'LFA1-NAME1'
wa_disp-name.
'test name'.
PERFORM bdc_field USING 'LFA1-SORTL'
'TEST NAME'.
PERFORM bdc_field USING 'LFA1-LAND1'
wa_disp-country.
'in'.
PERFORM bdc_field USING 'LFA1-SPRAS'
'en'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-AKONT'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=UPDA'.
PERFORM bdc_field USING 'LFM1-WAERS'
wa_disp-ordcurr.
'inr'.
PERFORM bdc_transaction USING 'XK01'.
WRITE:/ WA_DISP-VendorNo,
WA_DISP-COMPCC,
WA_DISP-PURCHORG,
WA_DISP-ACCGROUP,
WA_DISP-title,
WA_DISP-name,
WA_DISP-country,
WA_DISP-ORDCURR.
CLEAR: wa_disp.
REFRESH bdcdata.
ENDLOOP.
ENDFORM. " F_DISP_FILE1
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field *
FORM bdc_field USING fnam fval.
IF FVAL NODATA.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDIF.
ENDFORM. "BDC_FIELD
*& Form bdc_transaction
text
-->P_0322 text
FORM bdc_transaction USING tcode.
DATA: l_mstring(480),
l_subrc LIKE sy-subrc.
REFRESH messtab.
CALL TRANSACTION tcode USING bdcdata
MODE p_cmode
UPDATE 'L'
MESSAGES INTO messtab.
l_subrc = sy-subrc.
IF SMALLLOG 'X'.
WRITE: / 'CALL_TRANSACTION',
TCODE,
'returncode:'(I05),
L_SUBRC,
'RECORD:',
SY-INDEX.
LOOP AT messtab.
SELECT SINGLE * FROM t100 WHERE sprsl = messtab-msgspra
AND arbgb = messtab-msgid
AND msgnr = messtab-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH messtab-msgv1 INTO l_mstring.
REPLACE '&2' WITH messtab-msgv2 INTO l_mstring.
REPLACE '&3' WITH messtab-msgv3 INTO l_mstring.
REPLACE '&4' WITH messtab-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH messtab-msgv1 INTO l_mstring.
REPLACE '&' WITH messtab-msgv2 INTO l_mstring.
REPLACE '&' WITH messtab-msgv3 INTO l_mstring.
REPLACE '&' WITH messtab-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
WRITE: / messtab-msgtyp, l_mstring(250).
*? Send this errors to err internal table
wa_err-msgtyp = messtab-msgtyp.
wa_err-l_mstring = l_mstring.
APPEND wa_err TO i_err.
ELSE.
WRITE: / messtab.
ENDIF.
CLEAR: messtab, wa_err.
ENDLOOP.
SKIP.
ENDIF.
ENDFORM. " bdc_transaction
*& Form f_disp_errs
text
--> p1 text
<-- p2 text
FORM f_disp_errs .
SORT i_err BY msgtyp.
LOOP AT i_err INTO wa_err.
AT FIRST.
WRITE : / text-002.
ULINE.
ENDAT.
AT NEW msgtyp.
IF wa_err-msgtyp = 'S'.
WRITE : / text-003.
ULINE.
ELSEIF wa_err-msgtyp = 'E'.
WRITE : / text-001.
ULINE.
ENDIF.
ENDAT.
WRITE : / wa_err-msgtyp, wa_err-l_mstring.
CLEAR wa_err.
ENDLOOP.
ENDFORM. " f_disp_errs
Regards

How can i handle error 500 ?

i want to implement simple error handling by using the erro-page construction in web.xml. so i create the following code:
<error-page>
<error-code>400</error-code>
<location>/fehler400.html</location>
</error-page>
when i produce error 400 the server goes to page fehler400.html.
when i use the same construction for error 500 (internal server error):
<error-page>
<error-code>500</error-code>
<location>/fehler500.html</location>
</error-page>
and i produce such an error it don't work correctly. The server goes into a endless loop. All time the server wanted to use the startpage of my application.
What can i do ?

when logout from application and than query a page inside the applicationen the server produces an error an whant to open the login site with event = init.
therewith this work i defined a default event on my login page.
<event name="*">
<null/>
</event>
now when i query a page inside the application without login the server brings automatically up the login page.

How can I handle runtime errors in Java

Please some one tell me what are runtime errors and How can I handle them using java code
This is important
Thanks in Advance
Chowdary AK

The java equivalent of function pointers is the one-instance class, as used to pass handlers to swing components, for example. Often an anonymous class is used.
Put your function signature in an interface, and pass an object that implements that interface:
public Class1 {
public interface CallBack {
    void myMethod(String arg1);
CallBack callb;
public Class1(CallBack callb) {
   this.callb = callb;
callb.myMethod("A string");
class2 {
   first = new Class1(new Class1.CallBack() {
     public void myMethod(String arg1) {
       ... do something ...

Errors in flat file records? how can i handle them?

Hi All,
I am new for BDC. I am uploading customer(XD01) records using BDC caltransaction method.my problem is when i am running the program, some times my program is not updating the records because of my flat file errors. after i correcting the error records and if i run the same program already updated records not processing. my program not running. what i need to do? how can i handle the flat file for reprocessing the error records?
i have around 50,000 records in my flat file.

your program accepts a flat file say the structure of it is structure_load and you create another structure similar to structure_load and name it structure_error.
loop at itab_load.
call transactions...
if success..
commit work and wait X sec.
else.
move-corresponding field to structure_error
append structure_error.
endif.
endloop.
write the file stru_error to PC or app server and make the changes to the data and use the str_error as input to your code again..

Can any one tell me How can I handle internal error in smartforn

Hi,
How can I handle internal error in smartforn, what type of problem can be.
Regards
chandra

Look at [SAP Smart Forms (BC-SRV-SCR)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf]
Runtime Errors
Each Smart Form can trigger a number of exceptions during its execution. To limit this number of exceptions, you can bundle the occurring errors in error classes and store them in an error log in the composer. For each error, you store an internal error number and (if possible) a message from table T100 (work area, message number, message text and parameters) in addition to the error class. To each error class, you assign an exception, which means that if the recognized error teminates the form processing, the system triggers exactly this exception. When an exception occurs, the caller of the Smart Form can use predefined function modules to read the error log and then decide which reaction is appropriate in the respective error context.
Possible exceptions for the generated function module are:
- FORMATTING_ERROR
- INTERNAL_ ERROR
- SEND_ERROR
- USER_CANCELED
In addition, you can define your own exceptions.
If an error (or a warning) occurs, the system internally fills an error table. The application can now read this table as soon as the function module for the form is processed to the end. To read the table that contains all errors and warnings that occurred, call function module SSF_READ_ERRORS. The table has structure SSFERROR. The fields in the table are the number of the document within the job, the form name, an error number, a message class, a message type, a message number and four additional message variables. If processing is terminated, the application can dynamically display a message. The error numbers are defined in the include SSF_ERROR.
If you want to trigger your own exception in the free coding of the Smart Form, you can use one of the following methods:
- Use the macro user_exception <exception>, which triggers the exception <exception> and fills the above tables. After the termination additional system variables for the error (symsgno, sy-msgtyp, and so on) do not contain the values required for your own exception.
- If you want to access the system variables sy-msgno, sy-msgtyp, and so on for your exception directly, proceed as follows: Call function module SSF_MESSAGE and trigger your exception yourself using the RAISE statement.
The system field &SFSY-EXCEPTION& contains the name of the triggered exception.
Then debug your program.
Regards

I made a website and the domainname is tschantré with that special é (egue). but it gives me an error, how can i handle that?

how can i handle that i can gibe the domainname with é - any code? or something else?

Could you please confirm the error message you are getting and whether it is while adding domain in File > Export as HTML or File > Upload to FTP host option or if there is a different location you are referring to?
I checked and both the Export and Upload to FTP options both accept the accented characters in domain name field.
Cheers,
Vikas

How can I handel errors in .ksh file

Hi All
I am writing a .ksh file which will create FTP a file to the ftp location ..
My file looks like this :-
cd ${RUNTIME}
NOW=$(date +"%y%m%d%H%M%S")
ftp -i -n -v ${TEST_TP_SERVER} <<END
user $TEST_TP_USER_ID $TEST_TP_USER_PWD
lcd ${OUTDIR}
put "TEST.txt" "$NOW.ABC"
quit
END
My question is how can I handel errors here in this file . If something happens after cd ${RUNTIME} line then I can write like this :
if [ "$?" -ne "0" ]; then echo "Can not connect , wrong user name / password " exit 1 fi
But after ftp -i -n -v ${TEST_TP_SERVER} <<END line I cant write the same . So can anyone please tell me how can I write error handling part after FTP command ?

Moreover, I need to send that page as a whole by email, so even if the white spaces between parts of picture
could be removed during printing, it wouldn't be a solution =(
You can email the new PDF document.

How can we handle multiple applications in session method

how can we handle multiple applications in .. session method.
can any body reply me.
thanks

Hari,
hi Check out this sample code to use session method
REPORT ztest_report
NO STANDARD PAGE HEADING
                        LINE-SIZE 255
                        MESSAGE-ID ZRASH.
                Internal Table Declarations                          *
*--Internal Table for Data Uploading.
DATA : BEGIN OF IT_FFCUST OCCURS 0,
         KUNNR(10),
         BUKRS(4),
         KTOKD(4),
         ANRED(15),
         NAME1(35),
         SORTL(10),
         STRAS(35),
         ORT01(35),
         PSTLZ(10),
         LAND1(3),
         SPRAS(2),
         AKONT(10),
       END OF IT_FFCUST.
*--Internal Table to Store Error Records.
DATA : BEGIN OF IT_ERRCUST OCCURS 0,
         KUNNR(10),
         EMSG(255),
       END OF IT_ERRCUST.
*--Internal Table to Store Successful Records.
DATA : BEGIN OF IT_SUCCUST OCCURS 0,
         KUNNR(10),
         SMSG(255),
       END OF IT_SUCCUST.
*--Internal Table for Storing the BDC data.
DATA : IT_CUSTBDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA : IT_CUSTMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_FLAG1(1) VALUE ' ',
"Flag used for opening session.
       V_TLINES LIKE SY-TABIX,
       "For storing total records processed.
       V_ELINES LIKE SY-TABIX,
       "For storing the no of error records.
       V_SLINES LIKE SY-TABIX.
       "For storing the no of success records.
         Selection screen                                            *
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS : V_FNAME LIKE RLGRAP-FILENAME,
             V_SESNAM LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
         Start-of-selection                                          *
START-OF-SELECTION.
*-- Form to upload flatfile data into the internal table.
PERFORM FORM_UPLOADFF.
       TOP-OF-PAGE                                                   *
TOP-OF-PAGE.
WRITE:/ 'Details of the error and success records for the transaction'
ULINE.
SKIP.
         End of Selection                                            *
END-OF-SELECTION.
*-- Form to Generate a BDC from the Uploaded Internal table
PERFORM FORM_BDCGENERATE.
*--To write the totals and the session name.
PERFORM FORM_WRITEOP.
*&      Form form_uploadff
    Form to upload flatfile data into the internal table.
FORM FORM_UPLOADFF .
*--Variable to change the type of the parameter file name.
DATA : LV_FILE TYPE STRING.
LV_FILE = V_FNAME.
*--Function to upload the flat file to the internal table.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                      = LV_FILE
    FILETYPE                      = 'ASC'
      HAS_FIELD_SEPARATOR           = 'X'
    HEADER_LENGTH                 = 0
    READ_BY_LINE                  = 'X'
    DAT_MODE                      = ' '
IMPORTING
    FILELENGTH                    =
    HEADER                        =
    TABLES
      DATA_TAB                      = IT_FFCUST
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      NO_AUTHORITY                  = 6
      UNKNOWN_ERROR                 = 7
      BAD_DATA_FORMAT               = 8
      HEADER_NOT_ALLOWED            = 9
      SEPARATOR_NOT_ALLOWED         = 10
      HEADER_TOO_LONG               = 11
      UNKNOWN_DP_ERROR              = 12
      ACCESS_DENIED                 = 13
      DP_OUT_OF_MEMORY              = 14
      DISK_FULL                     = 15
      DP_TIMEOUT                    = 16
      OTHERS                        = 17
IF SY-SUBRC = 0.
*--Deleting the headings from the internal table.
    DELETE IT_FFCUST INDEX 1.
*--Getting the total number of records uploaded.
    DESCRIBE TABLE IT_FFCUST LINES V_TLINES.
ENDIF.
ENDFORM.                    " form_uploadff
*&      Form Form_bdcgenerate
    Form to Generate a BDC from the Uploaded Internal table
FORM FORM_BDCGENERATE .
*--Generating the BDC table for the fields of the internal table.
LOOP AT IT_FFCUST.
    PERFORM POPULATEBDC USING :
                                'X' 'SAPMF02D' '0105',
                                ' ' 'BDC_OKCODE' '/00' ,
                                ' ' 'RF02D-KUNNR' IT_FFCUST-KUNNR,
                                ' ' 'RF02D-BUKRS' IT_FFCUST-BUKRS,
                                ' ' 'RF02D-KTOKD' IT_FFCUST-KTOKD,
                                'X' 'SAPMF02D' '0110' ,
                                ' ' 'BDC_OKCODE' '/00',
                                ' ' 'KNA1-ANRED' IT_FFCUST-ANRED,
                                ' ' 'KNA1-NAME1' IT_FFCUST-NAME1,
                                ' ' 'KNA1-SORTL' IT_FFCUST-SORTL,
                                ' ' 'KNA1-STRAS' IT_FFCUST-STRAS,
                                ' ' 'KNA1-ORT01' IT_FFCUST-ORT01,
                                ' ' 'KNA1-PSTLZ' IT_FFCUST-PSTLZ,
                                ' ' 'KNA1-LAND1' IT_FFCUST-LAND1,
                                ' ' 'KNA1-SPRAS' IT_FFCUST-SPRAS,
                                'X' 'SAPMFO2D' '0120',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0125',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0130',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0340',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0360',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0210',
                                ' ' 'KNB1-AKONT' IT_FFCUST-AKONT,
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0215',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0220',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0230',
                                ' ' 'BDC_OKCODE' '=UPDA'.
*--Calling the transaction 'fd01'.
    CALL TRANSACTION 'FD01' USING IT_CUSTBDC MODE 'N' UPDATE 'S'
    MESSAGES INTO IT_CUSTMSG.
    IF SY-SUBRC <> 0.
*--Populating the error records internal table.
      IT_ERRCUST-KUNNR = IT_FFCUST-KUNNR.
      APPEND IT_ERRCUST.
      CLEAR IT_ERRCUST.
*--Opening a session if there is an error record.
      IF V_FLAG1 = ' '.
        PERFORM FORM_OPENSESSION.
        V_FLAG1 = 'X'.
      ENDIF.
*--Inserting the error records into already open session.
      IF V_FLAG1 = 'X'.
        PERFORM FORM_INSERT.
      ENDIF.
*--Populating the Success records internal table.
    ELSE.
      IT_SUCCUST-KUNNR = IT_FFCUST-KUNNR.
      APPEND IT_SUCCUST.
      CLEAR IT_SUCCUST.
    ENDIF.
*--Displaying the messages.
    IF NOT IT_CUSTMSG[] IS INITIAL.
      PERFORM FORM_FORMATMSG.
    ENDIF.
*--Clearing the message and bdc tables.
    CLEAR : IT_CUSTBDC[],IT_CUSTMSG[].
ENDLOOP.
*--Getting the total no of error records.
DESCRIBE TABLE IT_ERRCUST LINES V_ELINES.
*--Getting the total no of successful records.
DESCRIBE TABLE IT_SUCCUST LINES V_SLINES.
*--Closing the session only if it is open.
IF V_FLAG1 = 'X'.
    PERFORM FORM_CLOSESESS.
ENDIF.
ENDFORM.                    " Form_bdcgenerate
*&      Form populatebdc
      FOrm to Populate the BDC table.
FORM POPULATEBDC USING    VALUE(P_0178)
                           VALUE(P_0179)
                           VALUE(P_0180).
IF P_0178 = 'X'.
    IT_CUSTBDC-PROGRAM = P_0179.
    IT_CUSTBDC-DYNPRO = P_0180.
    IT_CUSTBDC-DYNBEGIN = 'X'.
ELSE.
    IT_CUSTBDC-FNAM = P_0179.
    IT_CUSTBDC-FVAL = P_0180.
ENDIF.
APPEND IT_CUSTBDC.
CLEAR IT_CUSTBDC.
ENDFORM.                    " populatebdc
*&      Form FORM_OPENSESSION
      Form to Open a session.
FORM FORM_OPENSESSION .
*--Variable to convert the given session name into reqd type.
DATA : LV_SESNAM(12).
LV_SESNAM = V_SESNAM.
*--Opening a session.
CALL FUNCTION 'BDC_OPEN_GROUP'
   EXPORTING
     CLIENT                    = SY-MANDT
     GROUP                     = LV_SESNAM
     HOLDDATE                  = '20040805'
     KEEP                      = 'X'
     USER                      = SY-UNAME
     PROG                      = SY-CPROG
IMPORTING
   QID                       =
   EXCEPTIONS
     CLIENT_INVALID            = 1
     DESTINATION_INVALID       = 2
     GROUP_INVALID             = 3
     GROUP_IS_LOCKED           = 4
     HOLDDATE_INVALID          = 5
     INTERNAL_ERROR            = 6
     QUEUE_ERROR               = 7
     RUNNING                   = 8
     SYSTEM_LOCK_ERROR         = 9
     USER_INVALID              = 10
     OTHERS                    = 11
IF SY-SUBRC <> 0.
    WRITE :/ 'Session not open'.
ENDIF.
ENDFORM.                    " FORM_OPENSESSION
*&      Form FORM_INSERT
      fORM TO INSERT ERROR RECOED INTO A SESSION.
FORM FORM_INSERT .
*--Inserting the record into session.
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE                  = 'FD01'
    POST_LOCAL             = NOVBLOCAL
    PRINTING               = NOPRINT
    SIMUBATCH              = ' '
    CTUPARAMS              = ' '
    TABLES
      DYNPROTAB              = IT_CUSTBDC
    EXCEPTIONS
      INTERNAL_ERROR         = 1
      NOT_OPEN               = 2
      QUEUE_ERROR            = 3
      TCODE_INVALID          = 4
      PRINTING_INVALID       = 5
      POSTING_INVALID        = 6
      OTHERS                 = 7
IF SY-SUBRC <> 0.
    WRITE :/ 'Unable to insert the record'.
ENDIF.
ENDFORM.                    " FORM_INSERT
*&      Form FORM_CLOSESESS
      Form to Close the Open Session.
FORM FORM_CLOSESESS .
CALL FUNCTION 'BDC_CLOSE_GROUP'
    EXCEPTIONS
      NOT_OPEN    = 1
      QUEUE_ERROR = 2
      OTHERS      = 3.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM.                    " FORM_CLOSESESS
*&      Form FORM_FORMATMSG
      Form to format messages.
FORM FORM_FORMATMSG .
*--Var to store the formatted msg.
DATA : LV_MSG(255).
CALL FUNCTION 'FORMAT_MESSAGE'
    EXPORTING
      ID        = SY-MSGID
      LANG      = SY-LANGU
      NO        = SY-MSGNO
      V1        = SY-MSGV1
      V2        = SY-MSGV2
      V3        = SY-MSGV3
      V4        = SY-MSGV4
    IMPORTING
      MSG       = LV_MSG
    EXCEPTIONS
      NOT_FOUND = 1
      OTHERS    = 2.
IF SY-SUBRC = 0.
    WRITE :/ LV_MSG.
ENDIF.
ULINE.
ENDFORM.                    " FORM_FORMATMSG
*&      Form form_writeop
      To write the totals and the session name.
FORM FORM_WRITEOP .
WRITE :/ 'Total Records Uploaded :',V_TLINES,
           / 'No of Error Records :',V_ELINES,
           / 'No of Success Records :',V_SLINES,
           / 'Name of the Session :',V_SESNAM.
ULINE.
ENDFORM.                    " form_writeop
Don't forget to reward if useful..

How can I handle exception? - to give user more friendly notification

Hi!
User gets an error:
'Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum =...'
How can I handle this exception (when two users want to modify the same set of data at the same time)? I would like to hide the above error message and give user more friendly notification.
Thanks in advance,
Tom

Thanks Vikas for your answer.
These workarounds are really creative and I want to use one of them. BUT my problem is to 'catch' the exception/error when two users want to modify the same set of data at the same time.
Those solutions which we can read about in this link you gave me describe handling exceptions in pl/sql processes. How can I catch the error I am talking about in pl/sql code?
Code would be like this:
DECLARE
two_users EXCEPTION;
BEGIN
IF --catch the error
THEN RAISE two_users;
END IF;
EXCEPTION WHEN two_users
THEN :HIDDEN_ITEM := 'Error Message';
END;
What should I put in a place where there is '--catch the error' ??
Thanks in advance,
Tom

How can i handle BLOB.

How can i handle BLOB data.

Thank you for the input, but it wasn't so usefull. I found a soluten to get the get a blob from the database.
<snip>
MimeBodyPart mbp = new MimeBodyPart();
// Create the Multipart to be added the parts to
     Multipart mp = new MimeMultipart();
while( rs.next()) {
BLOB Attachment     = rs.getBLOB("att");
String FileName     = rs.getString("nam");
String FileType     = rs.getString("ext");
// Create and fill the second message part (Attachements)
     MimeBodyPart mbp1 = new MimeBodyPart();
     String type = (FileType != null ? FileType : dftMime);
     String fileName = (FileName != null ? FileName : dftName);
     mbp1.setDisposition(Part.ATTACHMENT);
     mbp1.setFileName(fileName);
     mbp1.setDataHandler(new
     DataHandler(new BLOBDataSource(Attachment, type)));
     mbp1.setHeader( "Content-Transfer-Encoding", "base64" );
     mp.addBodyPart(mbp1);
Now i get the following stacktrace:
A send error is occured. Exit program.null
javax.mail.internet.ParseException
at javax.mail.internet.ContentType.<init>(ContentType.java:89)
at javax.mail.internet.MimeBodyPart.updateHeaders(MimeBodyPart.java:1249)
at javax.mail.internet.MimeBodyPart.updateHeaders(MimeBodyPart.java:1001)
at javax.mail.internet.MimeMultipart.updateHeaders(MimeMultipart.java:333)
at javax.mail.internet.MimeBodyPart.updateHeaders(MimeBodyPart.java:1255)
at javax.mail.internet.MimeMessage.updateHeaders(MimeMessage.java:2012)
at javax.mail.internet.MimeMessage.saveChanges(MimeMessage.java:1980)
at javax.mail.Transport.send(Transport.java:97)
at miag.app.mail.SendMail.send(SendMail.java:150)
at miag.app.mail.SendMail.main(SendMail.java:37)
The email will not be sent.
Thank you
Rene

How can we trigger error message in BADI PARTNER_UPDATE

Hi All,
I have implemented a BADI PARTNER_UPDATE. In this I have validation ( Error Message ) on saving buisness partner.
It is giving the error message but it freeze all the fields. On pressing enter it goes for short dump.
In short dump it gives error The COMMIT WORK processing must not be interrupted.
Kindly suggest me that how can we pass error message and it also does not freeze the fields.
Regards,
Narendra Goyal

Hi Narendra,
How are you trying to display message.
Is it using message service class instance of message statement (which should not be used, as that is for GUI messages) or using collect FM or by adding to genil message class container.
Please try different approaches and see what works for you.
Thanks,
Rohit

How can we handle browser settings while dealing with the security ?

Hi ,
how can we handle browser settings while dealing with the security ?When we configured security in web.xml , during the first request the container is asking for the authentication credentials once they are provided it go's on. but when the user gives a fresh request from the second window within the same browser that time it is not asking for authentication. How can we overcome this.Is there anything to do with server configurations?
How can we make the container no to keep the things or act like session?

Ya... I am taking a small example need not happen always but a kind of possibility i am thinking off.
once the user sign out and just left without closing the browser and a friend (suppose not a good friend ... just kidding...) of that user may open the same jsp or file .This time the security is breached. If that feature or property exists....
I know what you might say ... the user will log-out before leaving where a programer might invalidate the session at the time of log out.
Consider the case of a bad Programing or just a programer might forget to invalidate,At that time as a application administrator how can he solve that issue.
Thanks.......
Edited by: user8483670 on Jun 6, 2011 1:08 AM
Edited by: user8483670 on Jun 6, 2011 1:09 AM

How can i remove JUNK TEXT from APEX

Hi ,
In our project Apex has integrated with oracle apps,every time we will open apex front end from oracle application(EBS).so we have two kinds of instances 1) development and other is production
every time we export the apex application from developement instance and import in production instance . after imported into production * we got JUNK TEXT like "TEXT:TEXT" in apex front end* so how can i remove JUNK TEXT from APEX
Apex 4.0.0.00.46 version
please somebody help on this issue
Help would be appreciated
Regards
Narender B

Hi,
It is not clear what you are seeing here. Also we don't know how you have integrated Apex with EBS. My guess is you have linked an Apex page to the EBS menu and when you click on the menu link you see the additional text on the Apex page.
You need to give details of how you have integrated Apex with EBS and where and when this additional text is being displayed for me to give you any help on this issue.
Rod West

How can I resolve error code -54 in iTunes? I am using the latest iTunes. No new updates are available.

How can I resolve error code -54 in iTunes? I am using the latest iTunes. No new updates are available. I'm using iTunes 11.3 on a MacBook Pro, OS X 10.6.8. I can't save my library in iTunes, the message just keeps popping up.

From an OS9 reference, error -54 is a software lock on a file or a permissions error. (Although there is no formal list of OSX error code some of the old codes still apply to OSX .)
First, try simply restarting your computer.
Try quitting iTunes, then deleting the .xml (not .itl !) version of the library file in the iTunes folder (iTunes will generate a new one).
iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814 - various things to try.
Unknown error (-54) while syncing ipod - https://discussions.apple.com/thread/1082953 - problem was locked files
Why does iTunes keep showing a -54 error when I sync my iPad? - https://discussions.apple.com/thread/3727114
Error -54 possibly related to Touch Copy - https://discussions.apple.com/thread/3727114 - cleared by deleting preferences on iPad.
iTunes: Missing folder or incorrect permissions may prevent authorization - http://support.apple.com/kb/ts1277
Troubleshooting permissions issues in Mac OS X - http://support.apple.com/kb/HT2963

How can i handle error in my apex form

Similar Messages

Maybe you are looking for