How can i insert into dynamic table ?

i have regular internal table with data .
i have dynamic table <dyn_tab>
i insert the data from itab
MOVE-CORRESPONDING ITAB TO <LS_LINE>.
    INSERT <LS_LINE> INTO TABLE <DYN_TABLE>.
OK , NOW I WANT TO ADD THE DATA FROM OTHER TABLE
THAT HOLD THE DATA THAT ALL THE DYNAMIC TAB BUILD FOR
HOW CAN I DO THIS INSERT ?
I NEED TO INSERT "KOSTL" TO MATCH LINE in <DYN_TABLE>
THIS WHAT I TRIED TO DO :
      SHIFT INDX1 LEFT DELETING LEADING SPACE.
      CONCATENATE 'KOSTL' INDX1 INTO FIELD .
ASSIGN COMPONENT FIELD OF STRUCTURE <DYN_TABLE> TO <FS>.
<FS> = IT_EKKN-KOSTL.
but i get dump that <FS> not been assign .

hi,
pls chk the sample code below.
REPORT zmaschl_create_data_dynamic .
TYPE-POOLS: slis.
DATA: it_fcat TYPE slis_t_fieldcat_alv,
is_fcat LIKE LINE OF it_fcat.
DATA: it_fieldcat TYPE lvc_t_fcat,
is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data.
DATA: new_line TYPE REF TO data.
FIELD-SYMBOLS: <l_table> TYPE ANY TABLE,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
* Build fieldcat
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'SYST'
CHANGING
ct_fieldcat = it_fcat[].
LOOP AT it_fcat INTO is_fcat WHERE NOT reptext_ddic IS initial.
MOVE-CORRESPONDING is_fcat TO is_fieldcat.
is_fieldcat-fieldname = is_fcat-fieldname.
is_fieldcat-ref_field = is_fcat-fieldname.
is_fieldcat-ref_table = is_fcat-ref_tabname.
APPEND is_fieldcat TO it_fieldcat.
ENDLOOP.
* Create a new Table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = new_table.
* Create a new Line with the same structure of the table.
ASSIGN new_table->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
* Test it...
DO 30 TIMES.
ASSIGN COMPONENT 'SUBRC' OF STRUCTURE <l_line> TO <l_field>.
<l_field> = sy-index.
INSERT <l_line> INTO TABLE <l_table>.
ENDDO.
LOOP AT <l_table> ASSIGNING <l_line>.
ASSIGN COMPONENT 'SUBRC' OF STRUCTURE <l_line> TO <l_field>.
WRITE <l_field>.
ENDLOOP.
Regards
Anver
<i>if hlped pls mark points</i>

Similar Messages

How can I insert into a table other than the default table in a form

Hi,
I want to insert into a table with some fields value of a form of another table. I have written insert code On successful submission of that form, but after submit it gives the following error
An unexpected error occurred: ORA-06502: PL/SQL: numeric or value error (WWV-16016)
My code is like this
declare
l_trn_id number;
l_provider_role varchar2(3);
l_provider_id varchar2(10);
begin
l_trn_id := p_session.get_value_as_number(p_block_name=>'DEFAULT',p_attribute_name=>'A_TRANSACTION_ID');
l_provider_id := p_session.get_value_as_varchar2(p_block_name=>'DEFAULT',p_attribute_name=>'A_PROVIDER1');
l_PROVIDER_ROLE := p_session.get_value_as_varchar2(p_block_name=>'DEFAULT',p_attribute_name=>'A_PROVIDER_ROLE1');
if (l_provider_role is not null) and (l_provider_id is not null) then
insert into service_provider_trans_records(service_provider_id,transaction_id,role_type_id)
values(l_provider_id, l_trn_id, l_provider_role);
commit;
end if;
end;
Where 'PROVIDER1' and 'PROVIDER_ROLE1' are not table fields.
How can do that or why this error comes ? Any idea?
Thanks
Sumita

Hi,
When do you get this error? Is it while running or while creating the form.
Here is a sample code which inserts a non-database column dummy into a table called dummy. This is done in successful procedure.
declare
l_dummy varchar2(1000);
begin
l_dummy := p_session.get_value_as_varchar2(p_block_name=>'DEFAULT',
p_attribute_name=>'A_DUMMY');
insert into sjayaram903_1g.dummy values(l_dummy);commit;
end;
Please check in your case if the size of the local variable is enough to hold the values being returned.
Thanks,
Sharmila

How can I write into a table cell (row, column are given) in a databae?

How can I write into a table cell (row, column are given) in a database using LabVIEW Database Toolkit? I am using Ms Access. Suppose I have three columns in a table, I write 1st row of 1st column, then 1st row of 3rd column. The problem I am having is after writing the 1st row 1st column, the reference goes to second row and if I write into 3rd column, it goes to 2nd row 3rd column. Any suggestion?
Solved!
Go to Solution.

When you do a SQL INSERT command, you create a new row. If you want to change an existing row, you have to use the UPDATE command (i.e. UPDATE tablename SET column = value WHERE some_column=some_value). The some_column could be the unique ID of each row, a date/time, etc.
I have no idea what function to use in the toolkit to execute a SQL command since I don't use the toolkit. I also don't understand why you just don't do a single INSERT. It would be much faster.

How can I insert values from table object into a regular table

I have a table named "ITEM", an object "T_ITEM_OBJ", a table object "ITEM_TBL" and a stored procedure as below.
CREATE TABLE ITEM
ITEMID VARCHAR2(10) NOT NULL,
PRODUCTID VARCHAR2(10) NOT NULL,
LISTPRICE NUMBER(10,2),
UNITCOST NUMBER(10,2),
SUPPLIER INTEGER,
STATUS VARCHAR2(2),
ATTR1 VARCHAR2(80),
ATTR2 VARCHAR2(80),
ATTR3 VARCHAR2(80),
ATTR4 VARCHAR2(80),
ATTR5 VARCHAR2(80)
TYPE T_ITEM_OBJ AS OBJECT
ITEMID VARCHAR2(10),
PRODUCTID VARCHAR2(10),
LISTPRICE NUMBER(10,2),
UNITCOST NUMBER(10,2),
SUPPLIER INTEGER,
STATUS VARCHAR2(2),
ATTR1 VARCHAR2(80),
ATTR2 VARCHAR2(80),
ATTR3 VARCHAR2(80),
ATTR4 VARCHAR2(80),
ATTR5 VARCHAR2(80)
TYPE ITEM_TBL AS TABLE OF T_ITEM_OBJ;
PROCEDURE InsertItemByObj(p_item_tbl IN ITEM_TBL, p_Count OUT PLS_INTEGER);
When I pass values from my java code through JDBC to this store procedure, how can I insert values from the "p_item_tbl" table object into ITEM table?
In the stored procedure, I wrote the code as below but it doesn't work at all even I can see values if I use something like p_item_tbl(1).itemid. How can I fix the problem?
INSERT INTO ITEM
ITEMID,
PRODUCTID,
LISTPRICE,
UNITCOST,
STATUS,
SUPPLIER,
ATTR1
) SELECT ITEMID, PRODUCTID, LISTPRICE,
UNITCOST, STATUS, SUPPLIER, ATTR1
FROM TABLE( CAST(p_item_tbl AS ITEM_TBL) ) it
WHERE it.ITEMID != NULL;
COMMIT;
Also, how can I count the number of objects in the table object p_item_tbl? and how can I use whole-loop or for-loop to retrieve values from the table object?
Thanks.

Sigh. I answered this in your other How can I convert table object into table record format?.
Please do not open multiple threads. It just confuses people and makes the trreads hard to follow. Also, please remember we are not Oracle employees, we are all volunteers here. We answer questions if we can, when we can. There is no SLA so please be patient.
Thank you for your future co-operation.
Cheers, APC

How to Improve inserts into Template table for Query Processing

Hi guys!
I need your advice. How can i improve inserts into template table (/BI0/0P00000010 for exemple)? In my scenario i forced to load data from cube C_X to cubes C_1, C_2 and C_3.
To get a goal i created a transformations and a DTP process with delta upload to each of cubes (C_1, C_2, C3). And that proccess takes about 3 hours! (it doesn't matter 1.000 or 100.000 records). But when i tried to load data with full update (with a filter) a proccess get data takes about 1 minutes.
I traced process and saw that inserting into template table (which create each time when proccess started) take the longest time. How can i improve it?

Hi Mahendar,
It will require some efforts to investigate it so I propose to open a support ticket with Microsoft (through portal).
Your first question interest me and I am not sure if you are doing proactive or reactive real time reporting. You can try with
HBase for storing and retrieving data. HBase known for providing good read and write speed. If you are not comfortable writing HBase syntax then you can add an abstraction layer i.e. HIVE. It might take little more time when you
query HBase from Hive.
If you are doing real time analytic, then you can choose from Strom and Microsoft Azure Stream Analytic.
Thanks and Regards,
Sudhir Rawat

Can't insert into nested table

I can't inserted into a nested table and my SQL is listed below.
SQL> CREATE TYPE naming_t AS OBJECT (name VARCHAR2(30), alias VARCHAR2(30)) NOT FINAL;
2 /
Type created.
SQL> CREATE TYPE terminal_t;
2 /
Type created.
SQL> CREATE TYPE terminal_t_nt AS TABLE OF REF terminal_t;
2 /
Type created.
SQL> CREATE TYPE connectivitynode_t UNDER naming_t (terminals terminal_t_nt) NOT FINAL;
2 /
Type created.
SQL> CREATE TYPE connectivitynode_t_nt AS TABLE OF REF connectivitynode_t;
2 /
Type created.
SQL> CREATE TYPE terminal_t UNDER naming_t (connectivitynodes connectivitynode_t_nt) NOT FINAL;
2 /
Type created.
SQL>
SQL> CREATE TABLE naming_tb (name VARCHAR2(30), alias VARCHAR2(30));
Table created.
SQL> CREATE TABLE connectivitynode_tb (name VARCHAR2(30), terminals terminal_t_nt) NESTED TABLE terminals STORE AS terminals_tb;
Table created.
SQL> CREATE TABLE terminal_tb (name VARCHAR2(30), connectivitynodes connectivitynode_t_nt) NESTED TABLE connectivitynodes STORE AS connectivitynodes_tb;
Table created.
SQL>
SQL> INSERT INTO naming_tb (name) VALUES ('AP1.132.B/C.T1');
1 row created.
SQL> INSERT INTO terminal_tb (name) VALUES ('AP1.132.B/C.T1');
1 row created.
SQL> INSERT INTO naming_tb (name) VALUES ('AP1.132.B/C.T2');
1 row created.
SQL> INSERT INTO terminal_tb (name) VALUES ('AP1.132.B/C.T2');
1 row created.
SQL>
SQL> INSERT INTO naming_tb (name) VALUES ('AP1.132.B/C.N1');
1 row created.
SQL> INSERT INTO connectivitynode_tb (name) VALUES ('AP1.132.B/C.N1');
1 row created.
SQL> INSERT INTO TABLE (SELECT terminals FROM connectivitynode_tb WHERE name='AP1.132.B/C.N1') SELECT REF(p) FROM terminal WHERE p.name='AP1.132.B/C.T1' OR p.name='AP1.132.B/C.T2';
INSERT INTO TABLE (SELECT terminals FROM connectivitynode_tb WHERE name='AP1.132.B/C.N1') SELECT REF(p) FROM terminal WHERE p.name='AP1.132.B/C.T1' OR p.name='AP1.132.B/C.T2'
ERROR at line 1:
ORA-00942: table or view does not exist

I think you dont have the table terminal referred in following select statement
SELECT REF(p) FROM terminal WHERE p.name='AP1.132.B/C.T1' OR p.name='AP1.132.B/C.T2';
Chandar

How to capture insert into wf_notifications table

we are building a custom app, which needs to know as soon as a row in insterted into the wf_notifications table, and we want to avod creating a on insert trigger on this table.
Is there a way to figure out that a row is being inserted into this table without having to write a trigger.
Thanks
Tapash

Oracle Workflow raises a business event oracle.apps.wf.notification.send as soon a notification record is created in WF_NOTIFICATIONS table. This business event has parameters such as NOTIFICATION_ID, RECIPIENT_ROLE etc. If you have access to the notification id you may access all other information from WF_NOTIFICATIONS table.
You may create a subscription to this business event with On Error -> Skip property so that in case of an error, your subscription does not impact the normal processing of seeded subscriptions. You may have a PLSQL rule function in the subscription to process the logic required when the notification is created.
Please refer to Oracle Workflow Developer Guide for more information on using Business Event System.
Hope this helps.
Vijay

How can I INSERT INTO from Staging Table to Production Table

I’ve got a Bulk Load process which works fine, but I’m having major problems downstream.
Almost everything is Varchar(100), and this works fine.
Except for these fields:
INDEX SHARES, INDEX MARKET CAP, INDEX WEIGHT, DAILY PRICE RETURN, and DAILY TOTAL RETURN
These four fields must be some kind of numeric, because I need to perform sums on these guys.
Here’s my SQL:
CREATE
TABLE [dbo].[S&P_Global_BMI_(US_Dollar)]
[CHANGE]
VARCHAR(100),
[EFFECTIVE DATE]
VARCHAR(100),
[COMPANY]
VARCHAR(100),
[RIC]
VARCHAR(100),
Etc.
[INDEX SHARES]
NUMERIC(18, 12),
[INDEX MARKET CAP]
NUMERIC(18, 12),
[INDEX WEIGHT]
NUMERIC(18, 12),
[DAILY PRICE RETURN]
NUMERIC(18, 12),
[DAILY TOTAL RETURN]
NUMERIC(18, 12),
From the main staging table, I’m writing data to 4 production tables.
CREATE
TABLE [dbo].[S&P_Global_Ex-U.S._LargeMidCap_(US_Dollar)]
[CHANGE]
VARCHAR(100),
[EFFECTIVE DATE]
VARCHAR(100),
[COMPANY]
VARCHAR(100),
[RIC]
VARCHAR(100),
Etc.
[INDEX SHARES]
FLOAT(20),
[INDEX MARKET CAP]
FLOAT(20),
[INDEX WEIGHT] FLOAT(20),
[DAILY PRICE RETURN]
FLOAT(20),
[DAILY TOTAL RETURN]
FLOAT(20),,
INSERT
INTO [dbo].[S&P_Global_Ex-U.S._LargeMidCap_(US_Dollar)]
SELECT
[CHANGE],
Etc.
[DAILY TOTAL RETURN]
FROM
[dbo].[S&P_Global_BMI_(US_Dollar)]
WHERE
isnumeric([Effective Date])
= 1
AND
[CHANGE] is
null
AND
[COUNTRY] <>
'US'
AND ([SIZE] =
'L' OR [SIZE]
= 'M')
The Bulk Load is throwing errors like this (unless I make everything Varchar):
Bulk load data conversion error (truncation) for row 7, column 23 (INDEX SHARES).
Msg 4863, Level 16, State 1, Line 1
When I try to load data from the staging table to the production table, I get this.
Msg 8115, Level 16, State 8, Line 1
Arithmetic overflow error converting varchar to data type numeric.
The statement has been terminated.
There must be an easy way to overcome this, right.
Please advise!
Thanks!!
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Nothing is returned. Everything is VARCHAR(100). the problem is this.
If I use FLOAT(18) or REAL, I get exponential numbers, which is useless to me.
If I use DECIMAL(18,12) or NUMERIC(18,12), I get errors.
Msg 4863, Level 16, State 1, Line 41
Bulk load data conversion error (truncation) for row 7, column 23 (INDEX SHARES).
Msg 4863, Level 16, State 1, Line 41
Bulk load data conversion error (truncation) for row 8, column 23 (INDEX SHARES).
Msg 4863, Level 16, State 1, Line 41
Bulk load data conversion error (truncation) for row 9, column 23 (INDEX SHARES).
There must be some data type that fits this!
Here's a sample of what I'm dealing with.
-0.900900901
9.302325581
-2.648171501
-1.402805723
-2.911830584
-2.220960866
2.897762349
-0.219640074
-5.458448607
-0.076626094
6.710940231
0.287200186
0.131682908
0.124276221
0.790818723
0.420505119
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

How can i insert picture in table

how can i instert picture id in table
table name emp
emp id number(12);
emp_pi blop;
now how can i instert picture in that emp_pi field and how i retrive
plz help me argent
plz give me code here
thanks

create table imagetab
(imagfile blob)
create or replace procedure set_image
is
declare
v_bfile BFILE;
v_blob BLOB;
begin
insert into imagetab (imagfile)
values (empty_blob())
return imagfile into v_blob;
v_bfile := BFILENAME ('IMAGEFILES', '<path:\image_file.ext>');
Dbms_Lob.fileopen (v_bfile, Dbms_Lob.File_Readonly);
Dbms_Lob.Loadfromfile (v_blob, v_bfile, Dbms_Lob.Getlength(v_bfile));
Dbms_Lob.Fileclose(v_bfile);
commit;
end;
CHECK THIS CODE
HOPE IT HELPS...

How can I insert into a view cache???

I have a problem in JClient like that:
A form that have 3 JTable:
- Table1 get data from UserTable in DB
- Table2 get data from GroupTable in DB
- Table3 get data from GroupTable in DB
and 2 buttons: btnAdd, btnRemove.
When I select a row in Table1, Table2 will get all records in GroupTable that row in Table1 belonging to and Table3 will get all records in GroupTable that row in Table1 not belonging to.
I want that when I select some rows in Table3 and click btnAdd then those rows in Table3 will be insert into Table2 and remove those rows from Table3. And when I select some rows in Table2 and click btnRemove then those rows in Table2 will be insert into Table3 and remove those rows from Table2.
Can you show me how to show that problem.
Thanks.

Hi,
When do you get this error? Is it while running or while creating the form.
Here is a sample code which inserts a non-database column dummy into a table called dummy. This is done in successful procedure.
declare
l_dummy varchar2(1000);
begin
l_dummy := p_session.get_value_as_varchar2(p_block_name=>'DEFAULT',
p_attribute_name=>'A_DUMMY');
insert into sjayaram903_1g.dummy values(l_dummy);commit;
end;
Please check in your case if the size of the local variable is enough to hold the values being returned.
Thanks,
Sharmila

How can I insert in the table detail of a master/detail form??

Hello, I have created a master/detail form from the assistant, and with the code generated by APEX I do not manage to insert a row in the table detail, I press the button 'Add Row' and refill information, when I press the button ' to apply changes ' me the following mistake appears:
'Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "C85B64D53C8D63E9D3EE83B82728DFA3", item checksum = "244B1FED90DF5CC5B0DDB6728F4D02DD"., update "CRM_ADMIN"."ASIGNACIONES_AM_CONTACTOS" set "SECUENCIA" = :b1, "CODIGO" = :b2, "NOMBRE_CLIENTE" = :b3, "NOMBRE" = :b4, "COMENTARIOS" = :b5, "CODIGO_COMERCIAL" = :b6'
How I can solve and be able to insert in the table it detail?
Thanks

Hi Law,
Text in a shape or a text box will not feature in the table of contents.
To get a colour behind your titles, type them into your document (not a shape). Format as Heading or some other paragraph style the TOC will recognise.
Select the title text and Format Panel > Text > Font > Gearwheel > Advanced Options.
Choose Character Fill Color and choose a colour from the palette (left) or colour circle (right).
Example Titles (all on the same page for a smaller screen shot).
Chapter 3 (in a coloured Text Box or Shape) does not appear in the TOC:
Hint for cheats :
To give the titles a wider Character Fill Colour, add some Tab characters before and after.
Regards,
Ian.

Can you insert into a table without having the table structure in place

I have tried to use the import wizard insert data in a CSV file into a table;
I have 7 column headers, however, where there are extra commas in a field the wizard just combines the 2 fields so that i get a total of 7 columns even though there should be more.
any ideas how i can round this problem?
should i use bulk copy?
sukai

Are you using correct text qualifiers in the CSV?
Satheesh
My Blog |
How to ask questions in technical forum

Why I can not insert into a table?

Hi, all,
I have a table "personstudy" with records already. Its primary key is "subjectid". and I have added a new column named "personstatus" varchar2(20) to it. After that, I want to insert into the field with "enrolled" for all records there. My script is like this:
insert into personstudy (personstatus) values ('enrolled');
the system reports:
ERROR at line 1:
ORA-01400: cannot insert NULL into ("FLOWLIMS"."PERSONSTUDY"."SUBJECTID")
I just can not understand it. Is there any wrong with my script?
Thank you!
Qian

maybe want you need is not insert a new rows but to update the existing records to have the 'enrolled' value put into the column personstatus.
update personstudy
set personstatus = 'enrolled';

How do i insert into temp table

Hi ALL,
I have a table APP
APP_I Acronym Desc
1 ACC Accounts
PLTFRM
swr_pltfrm_i swr_pltfrm_x swr_pltfrm_typ_x
1 AIX-JAVA Execution
2 COBOL/BATCH Execution
3 COBOL/CICS Execution
4 CONSULTWORKS/MOBILE Delivery
5 CONSULTWORKS Delivery
PLTFRM_APP_ENVT
swr_pltfrm_i app_i
1 1
2 1
3 1
4 1
5 1
I want to create one temporary tab
TEMP_insert(app_i,desc, acrnymc ,delivery,execution) which have this columns
App_i desc acrnymc execution
1 Accounts ACC AIX-JAVA,COBOL/BATCH,COBOL/CICS
delivery
CONSULTWORKS,CONSULTWORKS/MOBILE
How do i insert the row in to the Temp_Insert table based on APP_I as input to my stored procedure.
Thanks

hopefully this will help
dev>declare
2      cursor c is select empno,ename,job from emp where deptno=20 and rownum<3;
3      str varchar2(100);
4 begin
5      for cur in c loop
6          str:=str||' '||cur.ename||' '||cur.job;
7      end loop;
8      insert into emp_test (ename) VALUES(str);
9 end;
10 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.00
dev>select ename from emp_test;
ENAME
SMITH CLERK JONES MANAGER
[pre

How can I insert a new table whose cells are linked to Cell Styles?

How can I define a Table Style so that cells in new tables are automatically linked to my Cell Styles? (Not sure if "linked" is exactly the appropriate word....I'm going for "connected in such a way that when the Style is changed, the character/paragraph/cell/table/object updates to reflect the change.")
I thought the whole point of using Cell Styles in Table Styles would be so the cells can be automatically linked to the desired Cell Styles when the table is created -- but that isn't happening for me. I don't know if I'm just confused or if this is a bug:
When I insert a new table of a Table Style I have defined, it seems all cells in the new table are simply linked to Cell Style [None], with overrides for each cell that are consistent with the applicable Cell Style as it was defined when the table was inserted. So although the appearance of each cell is consistent with the Cell Style I defined for for that region of the table, the cells don't update if I later make changes to the Cell Styles I defined.
(If, after inserting a new table, I manually select each cell and apply the desired Cell Style, then the cells do (of course) update when I change the Cell Styles.)
Is it possible to have cells be actually linked to Cell Styles when a new table is inserted, instead of cells being simply linked to style [None] with overrides?
(I'm using the up-do-date 2014 release of InDesign CC, in case that's relevant.)

there is a example on Page 1149 of book Graphic Java 2 mastering the JFC
by David M. Geary. ISBN: 0-L3-079667-0, Try to take a look the code. It will help.

How can i insert into dynamic table ?

Similar Messages

Maybe you are looking for