How to Improve inserts into Template table for Query Processing
Hi guys!
I need your advice. How can i improve inserts into template table (/BI0/0P00000010 for exemple)? In my scenario i forced to load data from cube C_X to cubes C_1, C_2 and C_3.
To get a goal i created a transformations and a DTP process with delta upload to each of cubes (C_1, C_2, C3). And that proccess takes about 3 hours! (it doesn't matter 1.000 or 100.000 records). But when i tried to load data with full update (with a filter) a proccess get data takes about 1 minutes.
I traced process and saw that inserting into template table (which create each time when proccess started) take the longest time. How can i improve it?
Hi Mahendar,
It will require some efforts to investigate it so I propose to open a support ticket with Microsoft (through portal).
Your first question interest me and I am not sure if you are doing proactive or reactive real time reporting. You can try with
HBase for storing and retrieving data. HBase known for providing good read and write speed. If you are not comfortable writing HBase syntax then you can add an abstraction layer i.e. HIVE. It might take little more time when you
query HBase from Hive.
If you are doing real time analytic, then you can choose from Strom and Microsoft Azure Stream Analytic.
Thanks and Regards,
Sudhir Rawat
Similar Messages
-
How can I insert into a table other than the default table in a form
Hi,
I want to insert into a table with some fields value of a form of another table. I have written insert code On successful submission of that form, but after submit it gives the following error
An unexpected error occurred: ORA-06502: PL/SQL: numeric or value error (WWV-16016)
My code is like this
declare
l_trn_id number;
l_provider_role varchar2(3);
l_provider_id varchar2(10);
begin
l_trn_id := p_session.get_value_as_number(p_block_name=>'DEFAULT',p_attribute_name=>'A_TRANSACTION_ID');
l_provider_id := p_session.get_value_as_varchar2(p_block_name=>'DEFAULT',p_attribute_name=>'A_PROVIDER1');
l_PROVIDER_ROLE := p_session.get_value_as_varchar2(p_block_name=>'DEFAULT',p_attribute_name=>'A_PROVIDER_ROLE1');
if (l_provider_role is not null) and (l_provider_id is not null) then
insert into service_provider_trans_records(service_provider_id,transaction_id,role_type_id)
values(l_provider_id, l_trn_id, l_provider_role);
commit;
end if;
end;
Where 'PROVIDER1' and 'PROVIDER_ROLE1' are not table fields.
How can do that or why this error comes ? Any idea?
Thanks
SumitaHi,
When do you get this error? Is it while running or while creating the form.
Here is a sample code which inserts a non-database column dummy into a table called dummy. This is done in successful procedure.
declare
l_dummy varchar2(1000);
begin
l_dummy := p_session.get_value_as_varchar2(p_block_name=>'DEFAULT',
p_attribute_name=>'A_DUMMY');
insert into sjayaram903_1g.dummy values(l_dummy);commit;
end;
Please check in your case if the size of the local variable is enough to hold the values being returned.
Thanks,
Sharmila -
How to capture insert into wf_notifications table
we are building a custom app, which needs to know as soon as a row in insterted into the wf_notifications table, and we want to avod creating a on insert trigger on this table.
Is there a way to figure out that a row is being inserted into this table without having to write a trigger.
Thanks
TapashOracle Workflow raises a business event oracle.apps.wf.notification.send as soon a notification record is created in WF_NOTIFICATIONS table. This business event has parameters such as NOTIFICATION_ID, RECIPIENT_ROLE etc. If you have access to the notification id you may access all other information from WF_NOTIFICATIONS table.
You may create a subscription to this business event with On Error -> Skip property so that in case of an error, your subscription does not impact the normal processing of seeded subscriptions. You may have a PLSQL rule function in the subscription to process the logic required when the notification is created.
Please refer to Oracle Workflow Developer Guide for more information on using Business Event System.
Hope this helps.
Vijay -
How do i insert into temp table
Hi ALL,
I have a table APP
APP_I Acronym Desc
1 ACC Accounts
PLTFRM
swr_pltfrm_i swr_pltfrm_x swr_pltfrm_typ_x
1 AIX-JAVA Execution
2 COBOL/BATCH Execution
3 COBOL/CICS Execution
4 CONSULTWORKS/MOBILE Delivery
5 CONSULTWORKS Delivery
PLTFRM_APP_ENVT
swr_pltfrm_i app_i
1 1
2 1
3 1
4 1
5 1
I want to create one temporary tab
TEMP_insert(app_i,desc, acrnymc ,delivery,execution) which have this columns
App_i desc acrnymc execution
1 Accounts ACC AIX-JAVA,COBOL/BATCH,COBOL/CICS
delivery
CONSULTWORKS,CONSULTWORKS/MOBILE
How do i insert the row in to the Temp_Insert table based on APP_I as input to my stored procedure.
Thankshopefully this will help
dev>declare
2 cursor c is select empno,ename,job from emp where deptno=20 and rownum<3;
3 str varchar2(100);
4 begin
5 for cur in c loop
6 str:=str||' '||cur.ename||' '||cur.job;
7 end loop;
8 insert into emp_test (ename) VALUES(str);
9 end;
10 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.00
dev>select ename from emp_test;
ENAME
SMITH CLERK JONES MANAGER
[pre -
NULL values are inserted into interface table for read only columns
Hi, I developed a custom Integrator where some of the columns has to be displayed as read only in the layout. I am using SQL content to populate the data. When I upload the data NULL values are inserted into table interface? Is there any work around for this?
Thanks
Edited by: user593879 on Jan 12, 2010 7:21 PMDoesn't WebADI drive you insane at times?
I must say, when it's all working it looks great and it is very user friendly (end-user that is, NOT for developers!) but before you get to that stage… please please Oracle invest some time making Web ADI a bit more logical an coherent, get the obvious bugs out, please let us not have to update BNE tables anymore to get things done.
Anyway, I sorted this one out by setting the Width to zero (0) in the Layout. HTH. -
Insert into one table by query from other table
Dear sir, i have inserted in to Table A as below:
ROLE_ID
USER_ID
AUTH_STAT
BRANCH_CODE
Teller1
Phearom
A
001
Teller2
Phearom
A
001
I want to insert the same more value for field ROLE_ID, USER_ID and AUTH_STAT, except BRANCH_CODE must change. Value of field BRANCH_CODE in can query form Table B.
Kindly give me some idea.
Thank and Regard.
Phearom7d8870ae-222b-4d73-8251-86f34b1ad49e wrote:
Dear sir, i have inserted in to Table A as below:
ROLE_ID
USER_ID
AUTH_STAT
BRANCH_CODE
Teller1
Phearom
A
001
Teller2
Phearom
A
001
I want to insert the same more value for field ROLE_ID, USER_ID and AUTH_STAT, except BRANCH_CODE must change. Value of field BRANCH_CODE in can query form Table B.
Kindly give me some idea.
Thank and Regard.
Phearom
You don't seem to have taken any notice of the advice given in your last thread: Insert multi row
about reading Re: 2. How do I ask a question on the forums?
and following the advice there.
In fact, I suspect this is just another thread on the same problem.
Unless you give us the information required, we can't really help -
How can i insert into dynamic table ?
i have regular internal table with data .
i have dynamic table <dyn_tab>
i insert the data from itab
MOVE-CORRESPONDING ITAB TO <LS_LINE>.
INSERT <LS_LINE> INTO TABLE <DYN_TABLE>.
OK , NOW I WANT TO ADD THE DATA FROM OTHER TABLE
THAT HOLD THE DATA THAT ALL THE DYNAMIC TAB BUILD FOR
HOW CAN I DO THIS INSERT ?
I NEED TO INSERT "KOSTL" TO MATCH LINE in <DYN_TABLE>
THIS WHAT I TRIED TO DO :
SHIFT INDX1 LEFT DELETING LEADING SPACE.
CONCATENATE 'KOSTL' INDX1 INTO FIELD .
ASSIGN COMPONENT FIELD OF STRUCTURE <DYN_TABLE> TO <FS>.
<FS> = IT_EKKN-KOSTL.
but i get dump that <FS> not been assign .hi,
pls chk the sample code below.
REPORT zmaschl_create_data_dynamic .
TYPE-POOLS: slis.
DATA: it_fcat TYPE slis_t_fieldcat_alv,
is_fcat LIKE LINE OF it_fcat.
DATA: it_fieldcat TYPE lvc_t_fcat,
is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data.
DATA: new_line TYPE REF TO data.
FIELD-SYMBOLS: <l_table> TYPE ANY TABLE,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
* Build fieldcat
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'SYST'
CHANGING
ct_fieldcat = it_fcat[].
LOOP AT it_fcat INTO is_fcat WHERE NOT reptext_ddic IS initial.
MOVE-CORRESPONDING is_fcat TO is_fieldcat.
is_fieldcat-fieldname = is_fcat-fieldname.
is_fieldcat-ref_field = is_fcat-fieldname.
is_fieldcat-ref_table = is_fcat-ref_tabname.
APPEND is_fieldcat TO it_fieldcat.
ENDLOOP.
* Create a new Table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = new_table.
* Create a new Line with the same structure of the table.
ASSIGN new_table->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
* Test it...
DO 30 TIMES.
ASSIGN COMPONENT 'SUBRC' OF STRUCTURE <l_line> TO <l_field>.
<l_field> = sy-index.
INSERT <l_line> INTO TABLE <l_table>.
ENDDO.
LOOP AT <l_table> ASSIGNING <l_line>.
ASSIGN COMPONENT 'SUBRC' OF STRUCTURE <l_line> TO <l_field>.
WRITE <l_field>.
ENDLOOP.
Regards
Anver
<i>if hlped pls mark points</i> -
Upload csv file and insert into a table for user
Hello,
i want to create a Page on which, the User of my Application can upload a semicolon delimited file and the data of the file should automatically be stored in a table.
I can upload the file and the file is then stored in the htmldb_application_files table.
But I do not no how to parse the file....
Can anyone help me or is there anyone who have done that before?
Thank you,
TimTim...
Here is what I did in a similar situation.
Let the user download a csv file to use as an excel turnaround document.
I check digit the primary key. They are not supposed to touch that column.
They do their excel thing adding data in columns next to the ones they are updating. They now have the original and new data on the same row in the excel document. They save it on a share drive as a csv. A perl script wakes up and parses the csv. Verify's the check digit, checks that the old values still exist in the table... etc, and then does the update if all is well at the row level. The csv is replaced showing the success or failure of the update on each row.
Probably lots of other ways to accomplish this but I have gotten years of use out of the script. The original csv can come out of almost any application. Mine come from apex, discoverer and some excel queries.
Bob -
Inconsistent inserts into detail table of master-detail form
Hello,
[I am not sure if this is a bug or user error, so I've also put this in the bug tracking system. Apologize for the 'duplication']
I have a master-detail form: Orders is the master, and Order_Details is the detail. I have noticed some inconsistent behavior when inserting the detail information.
On occasion, the row will be inserted, and a null value will get inserted into the database for the first column of the detail table; all the other data values will be inserted fine. There doesn't seem to be any pattern to when it happens. I wrote down the following test steps:
1. Enter new order information and click 'Create'
2. Click 'Add Row' button so can add order detail info
3. Enter detail row information
4. Click 'Add Row' (I do this so I can see the success message that the detail data was actually inserted)
5. Click 'Apply Changes' at the master level.
I ran a query on the order details table and saw that the data inserted correctly. Then I ran the following test:
1. Enter new order information and click 'Create'
2. Click Add Row button so can add order detail info
3. Enter detail row information
4. Click 'Add Row' (success message appears that detail was inserted)
5. Enter second detail row information
6. Click 'Add Row' (success message appears that detail was inserted, however, now in the first column of that second detail row - the product name field/column - the data does not appear. I only see my null text value. The data in the first detail row is all correct)
7. Enter third row detail information
8. Click 'Add Row' (success message appears that detail was inserted, and this row's information appears correctly, as does the first row's, but the second row is still showing a null value for the product name column)
9. Click 'Apply Changes' to get out of the form
A query of the order details table shows that a null value (-) has indeed been inserted into the table for the product name column of the second detail row.
This behavior also happens when I don't have a null value for the LOV (i.e., it defaults to the first row of the lookup table).
Has anyone seen this before? Am I entering the data incorrectly?
Thanks.
-melissa
Message was edited by:
mblakenehaving the some problem. Any help with this ??
milowski were you able to solve it ? can you share the information.
Thanks -
How to insert into a table with a nested table which refer to another table
Hello everybody,
As the title of this thread might not be very understandable, I'm going to explain it :
In a context of a library, I have an object table about Book, and an object table about Subscriber.
In the table Subscriber, I have a nested table modeling the Loan made by the subscriber.
And finally, this nested table refers to the Book table.
Here the code concerning the creation of theses tables :
Book :
create or replace type TBook as object
number int,
title varchar2(50)
Loan :
create or replace type TLoan as object
book ref TBook,
loaning_date date
create or replace type NTLoan as table of TLoan;
Subscriber :
create or replace type TSubscriber as object
sub_id int,
name varchar2(25)
loans NTLoan
Now, my problem is how to insert into a table of TSubscriber... I tried this query, without any success...
insert into OSubscriber values
*(1, 'LEVEQUE', NTLoan(*
select TLoan(ref(b), '10/03/85') from OBook b where b.number = 1)
Of course, there is an occurrence of book in the table OBook with the number attribute 1.
Oracle returned me this error :
SQL error : ORA-00936: missing expression
00936. 00000 - "missing expression"
Thank you for your help1) NUMBER is a reserved word - you can't use it as identifier:
SQL> create or replace type TBook as object
2 (
3 number int,
4 title varchar2(50)
5 );
6 /
Warning: Type created with compilation errors.
SQL> show err
Errors for TYPE TBOOK:
LINE/COL ERROR
0/0 PL/SQL: Compilation unit analysis terminated
3/1 PLS-00330: invalid use of type name or subtype name2) Subquery must be enclosed in parenthesis:
SQL> create table OSubscriber of TSubscriber
2 nested table loans store as loans
3 /
Table created.
SQL> create table OBook of TBook
2 /
Table created.
SQL> insert
2 into OBook
3 values(
4 1,
5 'No Title'
6 )
7 /
1 row created.
SQL> commit
2 /
Commit complete.
SQL> insert into OSubscriber
2 values(
3 1,
4 'LEVEQUE',
5 NTLoan(
6 (select TLoan(ref(b),DATE '1985-10-03') from OBook b where b.num = 1)
7 )
8 )
9 /
1 row created.
SQL> select *
2 from OSubscriber
3 /
SUB_ID NAME
LOANS(BOOK, LOANING_DATE)
1 LEVEQUE
NTLOAN(TLOAN(000022020863025C8D48614D708DB5CD98524013DC88599E34C3D34E9B9DBA1418E49F1EB2, '03-OCT-85'))
SQL> SY. -
How to insert into 2 tables from the same page (with one button link)
Hi,
I have the following 2 tables....
Employees
emp_id number not null
name varchar2(30) not null
email varchar2(50)
hire_date date
dept_id number
PK = emp_id
FK = dept_id
Notes
note_id number not null
added_on date not null
added_by varchar2(30) not null
note varchar2(4000)
emp_id number not null
PK = note_id
FK = emp_id
I want to do an insert into both tables via the application and also via the same page (with one button link). I have made a form to add an employee with an add button - adding an employee is no problem.
Now, on the same page, I have added a html text area in another region, where the user can write a note. But how do I get the note to insert into the Notes table when the user clicks the add button?
In other words, when the user clicks 'add', the employee information should be inserted into the Employees table and the note should be inserted into the Notes table.
How do I go about doing this?
Thanks.Hi,
These are my After Submit Processes...
After Submit
30 Process Row of NOTES Automatic Row Processing (DML) Unconditional
30 Process Row of EMPLOYEES Automatic Row Processing (DML) Unconditional
40 reset page Clear Cache for all Items on Pages (PageID,PageID,PageID) Unconditional
40 reset page Clear Cache for all Items on Pages (PageID,PageID,PageID) Unconditional
40 reset page Clear Cache for all Items on Pages (PageID,PageID,PageID) Unconditional
40 reset page Clear Cache for all Items on Pages (PageID,PageID,PageID) Unconditional
50 Insert into Tables PL/SQL anonymous block Conditional
My pl/sql code is the same as posted earlier.
Upon inserting data into the forms and clicking the add button, I get this error...
ORA-06550: line 1, column 102: PL/SQL: ORA-00904: "NOTES": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
Error Unable to process row of table EMPLOYEES.
Is there something wrong with the pl/sql code or is it something else? -
Insert into two tables, how to insert multiple slave records
Hi, I have a problem with insert into two tables wizard.
The wizard works fine and I can add my records, but I need to enter multiple slave table records.
My database:
table: paper
`id_paper` INTEGER(11) NOT NULL AUTO_INCREMENT,
`make` VARCHAR(20) COLLATE utf8_general_ci NOT NULL DEFAULT '',
`model` VARCHAR(20) COLLATE utf8_general_ci NOT NULL DEFAULT '',
`gsm` INTEGER(11) NOT NULL,
PRIMARY KEY (`id_paper`)
table: paper_data
`id_paper_data` INTEGER(11) NOT NULL AUTO_INCREMENT,
`id_paper` INTEGER(11) NOT NULL,
`value` DOUBLE(15,3) NOT NULL,
`nanometer` INTEGER(11) NOT NULL,
PRIMARY KEY (`id_paper_data`)
I need to add multiple fields "value" and "nanometer"
Current form looks like this:
Make:
Model:
Gsm:
Value:
nanometer:
I need it to look like this:
Make:
Model:
Gsm:
Value:
nanometer:
Value:
nanometer:
Value:
nanometer:
Value:
nanometer:
and so on.
The field "id_paper" in table paper_data needs to get same id for entire transaction. Also how do I set default values for each field "nanometer" on my form the must be different (370,380,390 etc)?
Thanks.you can find an answer here: http://209.85.129.132/search?q=cache:PzQj57dsWmQJ:www.experts-exchange.com/Web_Development /Software/Macromedia_Dreamweaver/Q_23713792.html+Insert+Into+Two+Tables+Wizard&cd=3&hl=lt& ct=clnk&gl=lt
This is a copy of the post:
Hi experts,
Im using ADDT to design a page that needs to insert one record into a master ALBUMS table, along with three records into a GENRES table, all linked by the primary, auto-incremented ALBUMS. ALBUM_ID.
Ive tried many different ways of combining the Insert into Multiple Tables wizard and the insert record wizard with Link Transactions, all with no luck. Either only the album info gets inserted, or a ALBUM_ID cannot be null error from MySQL. Here is the structure of the tables
ALBUMS
ALBUM_ID, INT(11), Primary, Auto_Increment
alb_name, varchar
alb_release, YEAR
USER_ID, int
alb_image, varchar
GENRES
ALBUM_ID, int, NOT NULL
GENRE_ID, int, NOT NULL
ID, int, primary, auto-increment
Many thanks in advance...
==========================================================================================
//remove this line if you want to edit the code by hand
function Trigger_LinkTransactions(&$tNG) {
global $ins_genres;
$linkObj = new tNG_LinkedTrans($tNG, $ins_genres);
$linkObj->setLink("ALBUM_ID");
return $linkObj->Execute();
function Trigger_LinkTransactions2(&$tNG) {
global $ins_genres2;
$linkObj = new tNG_LinkedTrans($tNG, $ins_genres2);
$linkObj->setLink("ALBUM_ID");
return $linkObj->Execute();
function Trigger_LinkTransactions3(&$tNG) {
global $ins_genres3;
$linkObj = new tNG_LinkedTrans($tNG, $ins_genres3);
$linkObj->setLink("ALBUM_ID");
return $linkObj->Execute();
//end Trigger_LinkTransactions trigger
//-----------------------Different Section---------------------//
// Make an insert transaction instance
//Add Record Genre 1
$ins_genres = new tNG_insert($conn_MySQL);
$tNGs->addTransaction($ins_genres);
$ins_genres->registerTrigger("STARTER", "Trigger_Default_Starter", 1, "VALUE", null);
$ins_genres->registerTrigger("BEFORE", "Trigger_Default_FormValidation", 10, $detailValidation);
$ins_genres->setTable("genres");
$ins_genres->addColumn("GENRE_ID", "NUMERIC_TYPE", "POST", "GENRE_ID");
$ins_genres->addColumn("ALBUM_ID", "NUMERIC_TYPE", "VALUE", "");
$ins_genres->setPrimaryKey("ID", "NUMERIC_TYPE");
// Add Record Genre 2
$ins_genres2 = new tNG_insert($conn_MySQL);
$tNGs->addTransaction($ins_genres2);
$ins_genres2->registerTrigger("STARTER", "Trigger_Default_Starter", 1, "VALUE", null);
$ins_genres2->setTable("genres");
$ins_genres2->addColumn("GENRE_ID", "NUMERIC_TYPE", "POST", "GENRE_ID2");
$ins_genres2->addColumn("ALBUM_ID", "NUMERIC_TYPE", "VALUE", "");
$ins_genres2->setPrimaryKey("ID", "NUMERIC_TYPE");
// Add Record Genre 3
$ins_genres3 = new tNG_insert($conn_MySQL);
$tNGs->addTransaction($ins_genres3);
$ins_genres3->registerTrigger("STARTER", "Trigger_Default_Starter", 1, "VALUE", null);
$ins_genres3->setTable("genres");
$ins_genres3->addColumn("GENRE_ID", "NUMERIC_TYPE", "POST", "GENRE_ID3");
$ins_genres3->addColumn("ALBUM_ID", "NUMERIC_TYPE", "VALUE", "");
$ins_genres3->setPrimaryKey("ID", "NUMERIC_TYPE");
=========================================================================================
Hi Aaron,
Nice job!!
$ins_albums->registerTrigger("AFTER", "Trigger_LinkTransactions2", 98);
$ins_albums->registerTrigger("AFTER", "Trigger_LinkTransactions3", 98);
These lines, right? :-( Sorry I forgot to mention that
Thanks a lot for the grading! -
How to dynamic field insert into intenal table?
hi friends
this is my urgent requirements .... how to dynamic field insert into internal table if it possible please tell me
thanks & regards
pauldharmaHi,
Go through this
REPORT yusmm_text1 NO STANDARD PAGE HEADING
LINE-SIZE 199.
T A B L E S
TABLES: MARA,
MAKT,
THEAD.
GLOBAL TYPE-POOLS
TYPE-POOLS : SLIS.
GLOBAL TYPES
TYPES : BEGIN OF TP_FINAL,
MATNR TYPE MARA-MATNR,
BEGRU TYPE MARA-BEGRU,
MTART TYPE MARA-MTART,
MAKTX TYPE MAKT-MAKTX,
SPRAS TYPE MAKT-SPRAS,
LTXT(2000) TYPE C ,
SRNO TYPE N ,
END OF TP_FINAL.
TYPES : BEGIN OF TP_T002,
SPRAS TYPE T002-SPRAS,
LAISO TYPE T002-LAISO,
SRNO TYPE N ,
END OF TP_T002.
TYPES : BEGIN OF TP_MARA_MAKT,
MATNR TYPE MARA-MATNR,
BEGRU TYPE MARA-BEGRU,
MTART TYPE MARA-MTART,
SPRAS TYPE MAKT-SPRAS,
MAKTX TYPE MAKT-MAKTX,
END OF TP_MARA_MAKT.
Types: BEGIN OF tp_matnr,
matnr TYPE mara-matnr,
END OF tp_matnr.
GLOBAL ELEMENTARY VARIABLES
DATA : gv_date TYPE sy-datum.
DATA : gv_repid TYPE sy-repid.
DATA : g_var1(10) TYPE C.
DATA : gv_index TYPE sy-tabix.
DATA: gv_strg TYPE string,
gv_strg1(2000) TYPE C.
DATA : gv_lang TYPE sy-langu.
DATA : g_v(3) TYPE N .
DATA : gv_lines(3) TYPE N .
DATA : gv_var(3) TYPE N .
DATA : gv_var1(3) TYPE N.
DATA: gv_str TYPE STRING.
DATA: gv_str1 TYPE STRING.
DATA : gv_li TYPE I,
gv_lit TYPE I,
gv_lin TYPE I.
DATA: g_var11(3) TYPE N,
gv_li1(3) TYPE N,
g_var2(3) TYPE N.
DATA : gv_i1 TYPE I.
DATA : gv_i TYPE I.
DATA: gl_lenght TYPE I.
GLOBAL STRUCTURES
DATA: T_NEWTABLE TYPE REF TO DATA,
T_NEWLINE TYPE REF TO DATA,
T_FLDCAT1 TYPE SLIS_T_FIELDCAT_ALV,
T_FLDCAT TYPE LVC_T_FCAT,
WA_IT_FLDCAT TYPE LVC_S_FCAT,
WA_IT_FLDCAT1 TYPE SLIS_FIELDCAT_ALV,
WA_COLNO(2) TYPE N,
WA_FLNAME(5) TYPE C,
L_LT TYPE SLIS_LAYOUT_ALV.
GLOBAL INTERNAL TABLES (WITH INCLUDE STRUCTURE)
DATA : IG_MARA_MAKT TYPE STANDARD TABLE OF TP_MARA_MAKT,
WG_MARA_MAKT TYPE TP_MARA_MAKT.
DATA : IG_T002 TYPE STANDARD TABLE OF TP_T002,
WG_T002 TYPE TP_T002.
DATA : IG_FINAL TYPE STANDARD TABLE OF TP_FINAL,
WG_FINAL TYPE TP_FINAL.
data : IG_MATNR TYPE STANDARD TABLE OF TP_MATNR WITH HEADER LINE,
WG_MATNR TYPE TP_MATNR.
DATA:BEGIN OF IG_THEAD OCCURS 0.
INCLUDE STRUCTURE THEAD .
DATA: END OF IG_THEAD.
DATA:BEGIN OF IG_TLINE OCCURS 0.
INCLUDE STRUCTURE TLINE .
DATA:END OF IG_TLINE.
FIELD-SYMBOLS
FIELD-SYMBOLS: <T_DYNTABLE> TYPE STANDARD TABLE,"Dynamic internal
"tablename
<FS_DYNTABLE>, "Field symbol to create work area
<FS_FLDVAL> TYPE ANY. " Field symbol to assign values
COMPULSORY
FIELD-SYMBOLS: <FS_DATA> TYPE REF TO DATA,
<FS_DATA1> TYPE REF TO DATA,
<FS_2> TYPE STANDARD TABLE,
<FS_22> TYPE STANDARD TABLE,
<FS_1>,
<FS_11>,
<F>,
<FA>,
<LWA_LINE_WA>,
<LWA_LINE_WA1>.
------- Create Dyn Table From FC
DATA: LT_DATA TYPE REF TO DATA,
LT_DATA1 TYPE REF TO DATA,
LWA_LINE TYPE REF TO DATA,
LWA_LINE1 TYPE REF TO DATA,
LI_FIELD_CAT TYPE LVC_T_FCAT,
LWA_FIELD_CAT TYPE LVC_S_FCAT.
PARAMETERS & SELECT-OPTIONS
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_SPRAS FOR MAKT-SPRAS NO INTERVALS DEFAULT 'EN'
OBLIGATORY ,
S_MATNR FOR MARA-MATNR,
S_MTART FOR MARA-MTART.
PARAMETERS: GP_SIZE TYPE I DEFAULT '200'.
SELECTION-SCREEN : END OF BLOCK B1.
INITIALIZATION
INITIALIZATION.
gv_repid = sy-repid.
gv_date = sy-datum.
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
IF GP_SIZE < 0.
MESSAGE E002(00).
ENDIF.
IF GP_SIZE > 50000.
MESSAGE W130(26) WITH TEXT-004.
SET CURSOR FIELD 'gp_size'.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM DATA_FETCH.
PERFORM READ_DATA_TO_FINAL.
SORT ig_final BY matnr spras.
gv_lin = gv_li.
gv_li = gv_li - 2.
LOOP AT ig_final INTO wg_final.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = 'Material Number'.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = 'Authorization Group'.
g_VAR11 = wg_final-srno + 2.
gv_li1 = gv_li1 + 2.
MOVE : g_var11 TO gv_i1.
ASSIGN COMPONENT g_var11 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = 'MatDesc'.
g_var2 = g_var11 + gv_lines.
ASSIGN COMPONENT g_var2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = 'BasicData'.
APPEND <LWA_LINE_WA1> TO <FS_22>.
EXIT.
ENDLOOP.
LOOP AT ig_final INTO wg_final.
AT NEW matnr.
gv_index = sy-tabix.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = wg_final-matnr.
ENDAT.
AT NEW MATNR.
GV_INDEX = SY-TABIX.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = wg_final-matnr.
ENDAT.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = wg_final-begru.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = wg_final-begru.
gv_var = wg_final-srno + 2.
gv_li = gv_li + 2.
MOVE : gv_var TO gv_i.
ASSIGN COMPONENT gv_var OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = wg_final-maktx.
ASSIGN COMPONENT gv_var OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = wg_final-maktx.
gv_var1 = gv_var + gv_lines .
ASSIGN COMPONENT gv_var1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = wg_final-ltxt.
ASSIGN COMPONENT gv_var1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = wg_final-ltxt.
AT END OF matnr.
APPEND <LWA_LINE_WA> TO <FS_2>.
CLEAR <LWA_LINE_WA>.
ENDAT.
AT END OF matnr.
APPEND <LWA_LINE_WA1> TO <FS_22>.
CLEAR <LWA_LINE_WA1>.
ENDAT.
ENDLOOP.
PERFORM display..
*& Form data_fetch
text
--> p1 text
<-- p2 text
FORM DATA_FETCH .
SELECT matnr
from mara up to gp_size rows
appending corresponding fields of table ig_matnr
where matnr in s_matnr
and mtart in s_mtart.
loop at ig_matnr.
SELECT MARA~MATNR
MARA~BEGRU
MARA~MTART
MAKT~SPRAS
MAKT~MAKTX FROM MARA INNER JOIN MAKT
ON MARAMATNR = MAKTMATNR
appending corresponding fields of TABLE ig_mara_makt UP TO GP_SIZE
ROWS
WHERE makt~spras IN s_spras
AND mara~matnr IN s_matnr
AND mara~mtart IN s_mtart
AND mara~matnr EQ ig_matnr-matnr.
endloop.
IF sy-subrc = 0.
SORT ig_mara_makt.
ENDIF.
ENDFORM. " data_fetch
*& Form read_data_to_final
text
--> p1 text
<-- p2 text
FORM READ_DATA_TO_FINAL .
LOOP AT ig_mara_makt INTO wg_mara_makt .
wg_final-MATNR = wg_mara_makt-MATNR.
wg_final-BEGRU = wg_mara_makt-BEGRU.
wg_final-MTART = wg_mara_makt-MTART.
wg_final-SPRAS = wg_mara_makt-SPRAS.
wg_final-MAKTX = wg_mara_makt-MAKTX.
READ TABLE ig_t002 INTO wg_t002 WITH KEY spras = wg_final-spras.
IF sy-subrc = 0.
wg_final-srno = wg_t002-srno.
ENDIF.
CLEAR ig_thead[].
ig_thead-TDOBJECT = 'MATERIAL'.
ig_thead-TDNAME = wg_final-matnr.
ig_thead-TDID = 'GRUN'.
ig_thead-TDSPRAS = wg_final-spras.
CALL FUNCTION 'TEXT_READ'
EXPORTING
I_HEADER = IG_THEAD
I_READONLY = 'X'
IMPORTING
E_HEADER = IG_THEAD
TABLES
T_LINES = IG_TLINE[]
EXCEPTIONS
NOTFOUND = 1.
IF sy-subrc EQ 0.
LOOP AT ig_tline.
gv_strg = ig_tline-tdline.
IF gv_strg1 <> ' '.
CONCATENATE gv_strg1 ';' gv_strg INTO gv_strg1.
ELSE.
gv_strg1 = gv_strg.
ENDIF.
ENDLOOP.
wg_final-ltxt = gv_strg1.
APPEND wg_final TO ig_final.
CLEAR wg_final.
gv_strg1 = ' '.
ELSE.
APPEND wg_final TO ig_final.
ENDIF.
ENDLOOP.
ENDFORM. " read_data_to_final
" read_data_to_final
*& Form layout
text
--> p1 text
<-- p2 text
FORM LAYOUT .
CLEAR L_LT.
L_LT-ZEBRA = 'X'.
L_LT-COLWIDTH_OPTIMIZE = 'X'.
L_LT-WINDOW_TITLEBAR = 'MATERIAL DETAILS'.
ENDFORM. " layout
*& Form fieldcat
text
--> p1 text
<-- p2 text
FORM FIELDCAT .
SELECT SPRAS
LAISO FROM t002 INTO CORRESPONDING FIELDS OF TABLE ig_t002
WHERE spras IN s_spras.
DESCRIBE TABLE ig_t002 LINES gv_lines.
LOOP AT ig_t002 INTO wg_t002.
g_v = g_v + 1.
Wg_t002-srno = g_v.
MODIFY ig_t002 FROM wg_t002 TRANSPORTING SRNO.
ENDLOOP.
LOOP AT ig_t002 INTO wg_t002.
CLEAR WA_IT_FLDCAT.
MOVE SY-INDEX TO WA_COLNO.
CONCATENATE 'MD-' wg_t002-LAISO
WA_COLNO
INTO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = WA_FLNAME.
WA_IT_FLDCAT-INTLEN = 250.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
APPEND WA_IT_FLDCAT TO T_FLDCAT.
CLEAR wg_t002.
ENDLOOP.
LOOP AT ig_t002 INTO wg_t002.
CLEAR WA_IT_FLDCAT.
MOVE SY-INDEX TO WA_COLNO.
CONCATENATE 'BD-' wg_t002-LAISO
WA_COLNO
INTO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = WA_FLNAME.
WA_IT_FLDCAT-INTLEN = 250.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
APPEND WA_IT_FLDCAT TO T_FLDCAT.
CLEAR wg_t002.
ENDLOOP.
MOVE 'MATNR' TO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Material No'.
WA_IT_FLDCAT-INTLEN = 18.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO T_FLDCAT INDEX 1.
MOVE 'BEGRU' TO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Authorization Group'.
WA_IT_FLDCAT-INTLEN = 4.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO T_FLDCAT INDEX 2.
DESCRIBE TABLE T_FLDCAT LINES gv_li.
ASSIGN LT_DATA TO <FS_DATA>.
Creating the Dynamic Internal Table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = T_FLDCAT " Fieldcatalogue
IMPORTING
EP_TABLE = <FS_DATA> " Dynamic Internal Table
EXCEPTIONS
GENERATE_SUBPOOL_DIR_FULL = 1
OTHERS = 2.
Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA>->* TO <FS_1>.
Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_1> TO <FS_2>.
Creating a Workarea
CREATE DATA LWA_LINE LIKE LINE OF <FS_2> .
Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE->* TO <LWA_LINE_WA>.
LOOP AT T_FLDCAT INTO WA_IT_FLDCAT.
WA_IT_FLDCAT1-FIELDNAME = WA_IT_FLDCAT-FIELDNAME.
WA_IT_FLDCAT1-TABNAME = WA_IT_FLDCAT-TABNAME.
WA_IT_FLDCAT1-SELTEXT_L = WA_IT_FLDCAT-SELTEXT.
WA_IT_FLDCAT1-REF_TABNAME = 'MARC'.
APPEND WA_IT_FLDCAT1 TO T_FLDCAT1.
CLEAR : WA_IT_FLDCAT,WA_IT_FLDCAT1.
ENDLOOP.
ASSIGN LT_DATA1 TO <FS_DATA1>.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = T_FLDCAT " Fieldcatalogue
IMPORTING
EP_TABLE = <FS_DATA1> " Dynamic Internal table
EXCEPTIONS
GENERATE_SUBPOOL_DIR_FULL = 1
OTHERS = 2.
Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA1>->* TO <FS_11>.
Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_11> TO <FS_22>.
Creating a Workarea
CREATE DATA LWA_LINE1 LIKE LINE OF <FS_22> .
Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE1->* TO <LWA_LINE_WA1>.
ENDFORM. " fieldcat
*& Form show
text
--> p1 text
<-- p2 text
FORM Display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = GV_REPID
I_CALLBACK_PF_STATUS_SET = 'PF_STATUS_SET'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = L_LT
IT_FIELDCAT = T_FLDCAT1[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = <FS_2>
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " display
FORM PF_STATUS_SET USING RS_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'DISPLAY' .
ENDFORM. "PF_STATUS_SET
*& Form Name: user_command *
*& Form Desc: For Handling USER_COMMAND *
FORM USER_COMMAND USING IF_UCOMM TYPE SY-UCOMM
IS_SELFIELD TYPE SLIS_SELFIELD.
CASE IF_UCOMM.
WHEN 'DOWNLOAD'.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = ' '
DIAGNOSE_OBJECT = ' '
TEXT_QUESTION = 'Data download to excel'
TEXT_BUTTON_1 = 'Ja'(001)
ICON_BUTTON_1 = ' '
TEXT_BUTTON_2 = 'Nein'(002)
ICON_BUTTON_2 = ' '
DEFAULT_BUTTON = '1'
DISPLAY_CANCEL_BUTTON = 'X'
USERDEFINED_F1_HELP = ' '
START_COLUMN = 25
START_ROW = 6
POPUP_TYPE =
IMPORTING
ANSWER =
TABLES
PARAMETER =
EXCEPTIONS
TEXT_NOT_FOUND = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
FILENAME = 'C:\Material-Text.xls'
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = 'X'
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = 'X'
IMPORTING
FILELENGTH = GL_LENGHT
TABLES
DATA_TAB = <FS_22>
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF GL_LENGHT NE 0.
MESSAGE S398(00) WITH 'DATA downloaded to EXCEL'.
ENDIF.
Thanks
ENDCASE.
ENDFORM. "user_command -
How do i insert into more than one table from temp table?
Hi,
I have three tables such as temp,stck and stol
temp table contains data as below. It has 22 columns.
STOCK STOCKDESC ALIAS1 ALIAS2 ALIAS3 ALIAS4 ALIAS5 ALIAS6 ALIAS7 ALIAS8 ALIAS9 ALIAS10 ALIAS11 ALIAS12 ALIAS13 ALIAS14 ALIAS15 ALIAS16 ALIAS17 ALIAS18 ALIAS19 ALIAS20
bmg667691031 NOWE FINANSE LTD yy zz B282DV3 TESTICKER te te1 bmg667691031BM te 707943W ex IR-PRIME IR-ALTID IR-BLOOM NT-PRIME NT-ALTID NT-BLOOM AU-PRIME AU-ALTID AU-BLOOM mm
AA0098000181 UFACEX HOLDINGS VAR RT DUE 06-30-2010 kk yy mm TESTICKER aa ff AA0098000181GB bb 031969W cc IR-PRIME IR-ALTID IR-BLOOM NT-PRIME NT-ALTID NT-BLOOM AU-PRIME AU-ALTID AU-BLOOM ba
AC1350Z7M923 CDA GOVT TREAS BILLS CDS- 08-05-2010 ee ff gg TESTICKER hh ij AC1350Z7M923CA mn 1A1MTLU op IR-PRIME IR-ALTID IR-BLOOM NT-PRIME NT-ALTID NT-BLOOM AU-PRIME AU-ALTID AU-BLOOM op
stck table contains as below.It has six columns. But always first three columns will have values.
stock_id stock_code stock_description stock_type terriory_code preferred code
1185072 AED
1185073 ARA CURRENCY ARGENTINA PESO
1185074 ATS CURRENCY AUSTRIAN SCHS
stol table contains as below. It has 6 columns.Terriory_code is always empty.
stock_code territory_code stol_type stock_id stck_code_type sys_entry_date
AED 0 1185072 0 6/22/2007 3:59:13.000 PM
ARA 0 1185073 0 6/22/2007 3:59:13.000 PM
ATS 0 1185074 0 6/22/2007 3:59:13.000 PM
Now, i want to insert into stck and stol table based on temp table records. constraints to insert into stck and stol tables are as below
In temp table first column is called stock. This stock has to compare with stck table stock_code. If it is not present in stck table, then it has to insert into stck table with stock_id and stock_description. Here, I need to generate stock_id my self in the code.
In temp table, column 3 to column 22, i have alias. Each column has to check with stol table stock_code column. For instance, column3 check with stock_code column. Then column4 check with stock_code. If stock_code is not present in stol table, then i have to insert into stol table.
I need to generate stock,id in the code. How do i perform this insertion?
Edited by: user12852882 on Jun 12, 2010 2:37 AMIt can be done using SQL (no loops required)
insert into stock_table (stock_id,stock_code,stock_description)
select stock_id,get_stock_code,stockdesc /* get_stock_code is a function providing stock_code - usually a sequence value */
from (select t.stock stock_id,t.stockdesc,s.stock_id stock_stock_id
from temp_table t,stock_table s
where t.stock = s.stock_id(+)
where s.stock_id is null;
insert into stol_table (stock_code,sys_entry_date) /* not clear where other values to be inserted will come from */
select stock_code,sysdate
from (select t.stock_code,s.stock_code stol_stock_code
from (select distinct stock_code
from (select alias1 stock_code from temp_table union all
select alias2 from temp_table union all
select alias3 from temp_table union all
select alias4 from temp_table union all
select alias5 from temp_table union all
select alias6 from temp_table union all
select alias7 from temp_table union all
select alias8 from temp_table union all
select alias9 from temp_table union all
select alias10 from temp_table union all
select alias11 from temp_table union all
select alias12 from temp_table union all
select alias13 from temp_table union all
select alias14 from temp_table union all
select alias15 from temp_table union all
select alias16 from temp_table union all
select alias17 from temp_table union all
select alias18 from temp_table union all
select alias19 from temp_table union all
select alias20 from temp_table
) /* use unpivot instead if you are 11g */
where stock_code is not null
) t,stol_table s
where t.stock_code = s.stock_code(+)
where s.stock_code is null;
and think about damorgan's post, you'll never regret it (especially when you will not just think)
Regards
Etbin -
How to insert into a table in database1 from a table in database2?
hi!
how to insert into a table in database1 from a table in
database2?
can anyone help?
Tariq.using the EXEC_SQL package.
see form help for detail.
Regards.
Maybe you are looking for
-
This is totally insane!! They took someone's money in a sec by 'MISTAKE' but haven't returned after 10days. I already have chatted with two staffs about this but different from what they promised, this still has not solved yet! My devoted time for th
-
Which rechargeable batteries should I buy for the ...
Just wondering which batteries to buy for the phone as the person who last bought them has chucked the old ones out and now we don't know which ones to get? The range seems to be from 1300Mah downwards... Help!
-
Too much code in my answers report!
Hi experts! I'm trying to do a report but there is too much code in my columns. So I have (Removed Column) in the condicionals. Anyway that's an error! Is there any place too change the maximum length of the code I can write? Thanks for all!
-
Hi, Is there anyone who could help me debug this piece? I only get '1' in the print statement - instead of an expected 'ab1' Thanks. int RESULT; String testOut = new String(); String testIn1 = new String ("a"); String testIn2 = new String ("b"); RESU
-
Cached Thumbnail Size vs. Performance?
Has anyone increased the size settings for the cached thumbnails? If so, would you care to comment on the performance of PSE after doing so (as well as the size of your catalog)? Thanks! Sam