How can I interactively create a New File in LabVIEW 2011?

I am trying to create a new binary file interactively in LabVIEW, but the File Path control only offers the ability to either type in the full path and file name (cumbersome for the user), or browse for an existing file. I want to open a "New File" dialog that will allow the user to browse to the target directory, then be able to enter the name of a non-existing file to save the data to.
The way I'm currently doing it is creating a TXT file using the Windows Explorer "New Text Document" pop-up, then changing the file extension to the new value...which is again, very cumbersome.
The only thing I've found online is that there used to be a "New File.VI" in an older version of LabVIEW apparently...but I can't seem to find it in 2011.
Solved!
Go to Solution.

You can create a new file using the browse button.
Did your right click on the file path control and check the settings in the "Browse Options" menu?

Similar Messages

I bought iPhone 4 for my wife, didn't create a separate apple ID account for her at that time. How can I now create a new one for her, sync her phone to the same PC that I sync my iPhone with without loosing all of her data, contacts, etc. Please help!

I bought iPhone 4 for my wife, didn't create a separate apple ID account for her at that time. How can I now create a new one for her, sync her phone to the same PC that I sync my iPhone with without loosing all of her data, contacts, etc. Please help!

I bought iPhone 4 for my wife, didn't create a separate apple ID account for her at that time. How can I now create a new one for her, sync her phone to the same PC that I sync my iPhone with without loosing all of her data, contacts, etc. Please help!

How do I automatically create a new file at the beginning of a new day, otherwise I only want to append that days file?

In my robotics application I store my data using "Write to Spreadsheet.vi". I would like to append the file each time I run the program on any given day. On a NEW day I would automatically like to create a new file with a smiliar name and append that file for the day on which it is created. It's easy to do using the "Write to Measurement File. vi" but the text file created is vertical rather than horizontal, so I would like to use "Write to Spreadsheet". Any suggestions?
Also how to I include my VI as part of this question for others to see?
Thank you.
Attachments:
Untitled 4 (SubVI).vi ‏7 KB

Does the file you are writing have a timestamp in it? If so you could read the timestamp from the last time it was written and see if the day has changed, handling the name of the file appropriately. The easiest way to record the timestamp is probably to write the timestamp as the number of seconds that have elapsed since 12:00 am on Firday January 1st 1904 in UT. The "Get Date/Time in Seconds" function will give you this value.
Message Edited by jmcbee on 03-05-2009 12:56 PM
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

How can i re-create the download file on my dock

i accidently removed the download and document folders on my dock..those are the ones that were pre-made when i purchased the macbook air. how can i re-create them?

See image below - left side - gray area - click on documents folder then drag it down to your dock.
do the same with the downloads folder.
good luck

How can I delete / create a new Discussions Account?

I would like to change my user name. It appears that can't be done.
I'd like to delete my account and start over. It appears that can't be done.
I'd like to create an additional account using my same Apple ID. It appears that can't be done.
If there's something I'm missing here, please advise. Otherwise I hope the admins will consider (re-consider?) what is I'm sure an annoyance for others as well.
Thanks.

HollywoodGeek wrote:
I would like to change my user name. It appears that can't be done.
I'd like to delete my account and start over. It appears that can't be done.
I'd like to create an additional account using my same Apple ID. It appears that can't be done.
If there's something I'm missing here, please advise. Otherwise I hope the admins will consider (re-consider?) what is I'm sure an annoyance for others as well.
Thanks.
No it can't. This should work - Try using another browser to set up a new account. After you do that (if it works), go back to your favorite browser & enter your new account information.

How can i convert .gif/.bmp/.jpeg file to labview code(vi)?

Hi,
I am having a .gif file which consists of vi code. I want to convert that .gif file into vi & complile it. I am using LV 6.1 & 7 express. Is is possible?
Reverse is surely possible like we can convert the vi diagram into .gif/.bmp file? But above i dont know?
Your help will really appreciated.
Best Regards,
Nirmal

If I understand your desire, it's to be able to convert a graphical image (bit map or screen photo, for example) into a functional block of LabView code, with all of the wire work done, etc. This is a task approximately equivalent to performing optical character recognition.
In the case of a non-system subvi, unless that subvi is loaded, so that it's graphical representation can be recognized by comparing the bit-map image for the subvi on the photo with the available vi's.
Another difficult problem to solve is when the bit-map has been scaled up or down, such that there's a pixel count mismatch between the VI iconic bitmap and the photographic bitmap you wish to import into your code diagram.
And if you try to do recognition on objects that have h
ad their RGB color representations changed, as can happen when JPG compression or other compression forms are used that reduce to total number of colors saved, that challenges the object recognition further.
Also, what you're interested in having is only of value to Labview programmers, so there's not a very large market for such a tool to be sold to - unlike bitmaps of scanned text to ASCII or wordprocessor applications - traditional OCR software.
All this ins't to say it can't be done, but that it's difficult, and for the person or company that undertakes it, the sales potential is limited.
Regards,
Bob Donnell

How can I locate my iTunes library files. When I click on my itunes icon the message appears, "The file iTunes Library.itl." cannot be found because it was created by a newer version of iTunes."

How can I locate my iTunes library files? When I click on my iTunes icon rather than my iTunes files I receive, " The file iTunes Library.itl." cannot be read because it was created by a newer version of iTunes." I have already tried to update my iTunes program.

Had same problem and solved it without having to reinstore any music or movies:
1. Delete old Library file
2. Go to the 'Previous iTunes Libraries' folder and copy one of the earlier files - note, they have a date extension, e.g. 'iTunes Library 2011-11-01'.
3. Paste this file in your iTuners folder and rename file by removing the date extension - 'iTunes Library'
You should have all your music and paylists in tact, unless it was a really old previous file.

How can I use an old XMP file on a new set of images??

I have an older XMP file that contains settings used to retouch some previous images in a particular way. I'd like to apply those same settings to a new set of images. How can I use that older XMP file on a new set of images in Lightroom?
The contents of the XMP file are as follows:
<x:xmpmeta xmlns:x="adobe:ns:meta/" x:xmptk="Adobe XMP Core 4.2-c020 1.124078, Tue Sep 11 2007 23:21:40
">
<rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
<rdf:Description rdf:about=""
xmlns:crs="http://ns.adobe.com/camera-raw-settings/1.0/">
   <crs:Version>6.0</crs:Version>
   <crs:ProcessVersion>5.7</crs:ProcessVersion>
   <crs:WhiteBalance>Custom</crs:WhiteBalance>
   <crs:Temperature>4700</crs:Temperature>
   <crs:Tint>+4</crs:Tint>
   <crs:Exposure>-0.35</crs:Exposure>
   <crs:Shadows>5</crs:Shadows>
   <crs:Brightness>+50</crs:Brightness>
   <crs:Contrast>+25</crs:Contrast>
   <crs:Saturation>-8</crs:Saturation>
   <crs:Sharpness>25</crs:Sharpness>
   <crs:LuminanceSmoothing>0</crs:LuminanceSmoothing>
   <crs:ColorNoiseReduction>25</crs:ColorNoiseReduction>
   <crs:ChromaticAberrationR>0</crs:ChromaticAberrationR>
   <crs:ChromaticAberrationB>0</crs:ChromaticAberrationB>
   <crs:VignetteAmount>0</crs:VignetteAmount>
   <crs:ShadowTint>-1</crs:ShadowTint>
   <crs:RedHue>0</crs:RedHue>
   <crs:RedSaturation>0</crs:RedSaturation>
   <crs:GreenHue>0</crs:GreenHue>
   <crs:GreenSaturation>0</crs:GreenSaturation>
   <crs:BlueHue>0</crs:BlueHue>
   <crs:BlueSaturation>0</crs:BlueSaturation>
   <crs:FillLight>0</crs:FillLight>
   <crs:Vibrance>+5</crs:Vibrance>
   <crs:HighlightRecovery>24</crs:HighlightRecovery>
   <crs:Clarity>+8</crs:Clarity>
   <crs:Defringe>0</crs:Defringe>
   <crs:HueAdjustmentRed>0</crs:HueAdjustmentRed>
   <crs:HueAdjustmentOrange>0</crs:HueAdjustmentOrange>
   <crs:HueAdjustmentYellow>0</crs:HueAdjustmentYellow>
   <crs:HueAdjustmentGreen>0</crs:HueAdjustmentGreen>
   <crs:HueAdjustmentAqua>0</crs:HueAdjustmentAqua>
   <crs:HueAdjustmentBlue>0</crs:HueAdjustmentBlue>
   <crs:HueAdjustmentPurple>0</crs:HueAdjustmentPurple>
   <crs:HueAdjustmentMagenta>0</crs:HueAdjustmentMagenta>
   <crs:SaturationAdjustmentRed>0</crs:SaturationAdjustmentRed>
   <crs:SaturationAdjustmentOrange>0</crs:SaturationAdjustmentOrange>
   <crs:SaturationAdjustmentYellow>0</crs:SaturationAdjustmentYellow>
   <crs:SaturationAdjustmentGreen>0</crs:SaturationAdjustmentGreen>
   <crs:SaturationAdjustmentAqua>0</crs:SaturationAdjustmentAqua>
   <crs:SaturationAdjustmentBlue>0</crs:SaturationAdjustmentBlue>
   <crs:SaturationAdjustmentPurple>0</crs:SaturationAdjustmentPurple>
   <crs:SaturationAdjustmentMagenta>0</crs:SaturationAdjustmentMagenta>
   <crs:LuminanceAdjustmentRed>0</crs:LuminanceAdjustmentRed>
   <crs:LuminanceAdjustmentOrange>0</crs:LuminanceAdjustmentOrange>
   <crs:LuminanceAdjustmentYellow>0</crs:LuminanceAdjustmentYellow>
   <crs:LuminanceAdjustmentGreen>0</crs:LuminanceAdjustmentGreen>
   <crs:LuminanceAdjustmentAqua>0</crs:LuminanceAdjustmentAqua>
   <crs:LuminanceAdjustmentBlue>0</crs:LuminanceAdjustmentBlue>
   <crs:LuminanceAdjustmentPurple>0</crs:LuminanceAdjustmentPurple>
   <crs:LuminanceAdjustmentMagenta>0</crs:LuminanceAdjustmentMagenta>
   <crs:SplitToningShadowHue>138</crs:SplitToningShadowHue>
   <crs:SplitToningShadowSaturation>13</crs:SplitToningShadowSaturation>
   <crs:SplitToningHighlightHue>0</crs:SplitToningHighlightHue>
   <crs:SplitToningHighlightSaturation>0</crs:SplitToningHighlightSaturation>
   <crs:SplitToningBalance>0</crs:SplitToningBalance>
   <crs:ParametricShadows>0</crs:ParametricShadows>
   <crs:ParametricDarks>0</crs:ParametricDarks>
   <crs:ParametricLights>0</crs:ParametricLights>
   <crs:ParametricHighlights>0</crs:ParametricHighlights>
   <crs:ParametricShadowSplit>25</crs:ParametricShadowSplit>
   <crs:ParametricMidtoneSplit>50</crs:ParametricMidtoneSplit>
   <crs:ParametricHighlightSplit>75</crs:ParametricHighlightSplit>
   <crs:SharpenRadius>+1.0</crs:SharpenRadius>
   <crs:SharpenDetail>25</crs:SharpenDetail>
   <crs:SharpenEdgeMasking>0</crs:SharpenEdgeMasking>
   <crs:PostCropVignetteAmount>0</crs:PostCropVignetteAmount>
   <crs:GrainAmount>0</crs:GrainAmount>
   <crs:ColorNoiseReductionDetail>50</crs:ColorNoiseReductionDetail>
   <crs:ConvertToGrayscale>False</crs:ConvertToGrayscale>
   <crs:ToneCurveName>Medium Contrast</crs:ToneCurveName>
   <crs:ToneCurve>
<rdf:Seq>
<rdf:li>0, 0</rdf:li>
<rdf:li>32, 22</rdf:li>
<rdf:li>64, 56</rdf:li>
<rdf:li>128, 128</rdf:li>
<rdf:li>192, 196</rdf:li>
<rdf:li>255, 255</rdf:li>
</rdf:Seq>
   </crs:ToneCurve>
   <crs:CameraProfile>Adobe Standard</crs:CameraProfile>
   <crs:CameraProfileDigest>3DA8CE4A626CE36A1D0C55BF157793C9</crs:CameraProfileDigest>
   <crs:HasSettings>True</crs:HasSettings>
</rdf:Description>
</rdf:RDF>
</x:xmpmeta>

I’m pretty sure Adobe NEVER intended for someone to copy an XMP file from one photo to another outside of LR as a way to replicate settings.   You can make a preset from a photo, as discussed, or if you don’t want to do that, copy-paste the settings from a representative photo that you initially select to one or more new photos. You could have a special LR folder that holds standard photos to copy/paste from. Of course creating a Develop preset from the representative photo is the “normal” way to handle such situations, but maybe you have hundreds of different situations to copy settings from and don’t want to create presets for each one, but I’d argue that you could create a complex folder hierarchy for your presets and still have them findable without that much problem.
As far as the mystery about why some photos show Reset and some show From Metadata, is the Process Version (down in Camera Calibration) of the photo before reading the settings the same between the two situations? And in general, are these virgin photos newly imported into LR or have some been modified in LR, already? Does an XMP file already exist for any of these, where that XMP is being overwritten by your external-to-LR copying? Or do you have auto-write-XMP enabled and your hand-copied XMP is getting overwritten by LR, automatically, before you have a chance to read in anything?

Can't create a new file

When trying to create a new file, I get the following prompt and AI hangs and stops opening existing files.
"Can't create a new illustration. Problems occurred while saving the print file. -1"
Anyone know what's going on?
- CS6 AI v16.2.0
- MacBook Pro 2012
- OSX 10.8.2
- 8GB RAM

There's a problem with your original account. It is really hard to guess what might be the problem. How much do you use AI? Is it a hassle to use AI in the new account? You might try uninstalling the Creative Suite, run the CS Cleaner tool (do a google search for it), and reinstall the software. If you choose to do this, be sure to check the box to Delete Preferences when rinning the uninstall.

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings?

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings? Please help. Thanks.

You should have asked this before you tried: Changing username or short name- User Account and Short Name- OS X- How to change user account name or home directory name.

On my mac when i click on pages, a new document doesn't open instantly but a window with my files open and then have to click on the left bottom new document in order to open one. How can i have directly a new document when i click on pages icon

On my mac when i click on pages, a new document doesn't open instantly but a window with my files open and then have to click on the left bottom < new document> in order to open one. How can i have directly a new document when i click on pages icon

How to open an existing Pages document?
Click Pages icon in the Dock to launch Pages.
When Pages is open, click File menu in the Pages menu bar.
Select “Open”.
When the select document dialog box opens up, highlight/select the document and click “Open”
at the bottom right corner of the dialog box.
s
https://support.apple.com/kb/PH15304?locale=en_US

How can I transfer all of the files from my old iPhone 4S to my new iPhone 5?

how can I transfer all of the files from my old iPone 4S to my new iPhone 5?

Download the media content from an iTunes library or the iTunes Store, and follow these instructions to transfer your personal settings and data.
(83108)

Hi all, i'm new and facing a problem while creating a new file for Xcode. I can't select the box "with XIB for user interface" if the subclass is "UIViewController".this problem happen after i upgrade Xcode to 4.6 version.Appreciate for any help rendered.

Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
Appreciate for any help rendered.

Mikko777 wrote:So what is the best?
I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
Mikko777 wrote:PS:You produce a lot of text and welcome smile
Yeah. Wonder why I'm still employed? So do I ...

How can i make sure the graphic file from my subcontract create is really llegal?

how can i make sure the graphic file from my subcontract create is really llegal?
They have creat the PNG file which creat from Adobe Illustrator CS5.
I have try checking on Metadata In Adobe Bridge, and it seem to be blank.
So i would likt to know how can i make sure the graphic file from my subcontract create is really llegal?
Thanks

I have try checking on Metadata In Adobe Bridge, and it seem to be blank.
So i would likt to know how can i make sure the graphic file from my subcontract create is really llegal?
shoo: if i had to do that for every file i get i would go insane, as scott said, post contract: files that they (sub contractor) supply you, presume them ok unless you KNOW otherwise, or a copyright flag pops up contradicting ownership.
G

How to create a new file - help please.

hi there
i need to create a new file in my program, i did the following:
/*code--------------------
PrintWriter out = new PrintWriter(new FileOutputStream(new File("c:\\somedirectory\\outputfile.txt")));
out.println("product code:"+productCode);
out.println("product price:"+productPrice);
out.println("product description:"+productDes);
out.flush();
out.close();
the directory c:\somedirectory\ does not exist yet. i was hoping that when the new file is created, so was the directory. when i run it. the program could not find the path with following error message:
c:\somedirectory\outputfile.txt (The system cannot find the path specified)
can anyone of you experts point a rigth solution? thank you.

thanks
so the steps to create a new file in a new directory is as follow:
//create a file object with the directory path
File d = new File("c:\\xx\\");
d.mkdir();
//then create another file object with the path and the file name
File f = new File("c:\\xx\\abc.txt");
is this right?

How can I interactively create a New File in LabVIEW 2011?

Similar Messages

Maybe you are looking for