How can I just display the selected value of a listbox in a report without the reverse display and selection buttons?

I am using a table which contains a text field with a lookup. I want to use the selected value of this field in a form which is acting as a selection form. No editing of the field's value is permitted. How do I just display the value of the field (which
is considered a listbox on the form) without the reverse display and the up and down selection buttons. 
I can provide an illustration of the condition I am trying to overcome, but this system doesn't accept it.
Thank you for any suggestions or clarification you can provide.
Marj Weir

Thank you.  I'll try that approach. 
I found, after much experimentation, on a similar problem involving a multiselect lookup field,  that if I make the field invisible, and add a  textbox that displays the fieldname plus .column(0), it displays all the selected entries. 
E.g.: staff.Column(0)
Staff is the field containing the last names of selected staff members. 
staff.Value only shows the first name in the lookup list whether it is checked or not, so this is useless.
staff.column(0), however, (inexplicably) shows all the selected names, e.g. Jones, Smith, Wiggins.
Marj Weir
 

Similar Messages

  • How can I get volume on my I6 to hear incoming calls . I went to setting , sounds, and selected a tone, but still no sound for incoming calls, texts, or other notifications.

    How can I get volume on my I6 to hear incoming calls . I went to setting , sounds, and selected a tone, but still no sound for incoming calls, texts, or other notifications.

    Hi rsample,
    Thank you for visiting Apple Support Communities.
    Your symptoms make it sound like the iPhone side switch is set to silent mode.
    iOS: Understanding sounds, ringtones, and alerts
    Set your device to silent mode
    iPhone: Toggle the Ring/Silent switch on the side of the device.
    Best Regards,
    Nubz

  • How can we make one view field value to be copied to other field of the the

    Hi   
       I am new  in CRM2007 I have enhanced sap component & enhanced SAP View but I wanted the field value of the enhanced view to be mapped to the field value of the same view which is added from EEWB
    Pls tell me if the added new field can be made as Dropdown list box without fixed values & Design Layer customizing I mean to say through coding can we made the input field as Dropdown
    Appreciate any help in advance
    Thanks
    Neel

    Hi,
    You can write your own ligic in GET_V_<FIELD> method. Select the values which needs to be displayed in the drop down list based on your own condition. Some sample code is given below:
    METHOD get_v_zzverksomr.
      DATA: lt_ddlb           TYPE bsp_wd_dropdown_table,
              ls_ddlb           TYPE bsp_wd_dropdown_line,
              lv_display_only   TYPE string,
              gr_ddlb_verksomr  type ref to CL_CRM_UIU_DDLB,
              ls_verksomr_values  TYPE LINE OF vrm_values.
        SELECT verksomr verksomrtxt FROM zkb_verks
           INTO TABLE lt_ddlb.
        IF sy-subrc EQ 0.
          INSERT INITIAL LINE INTO lt_ddlb INDEX 1.
        ENDIF.
      IF gr_ddlb_verksomr IS NOT BOUND.
        FREE gr_ddlb_verksomr.
        CREATE OBJECT gr_ddlb_verksomr
          EXPORTING
            iv_source_type = 'T'.
        LOOP AT gt_verksomr_values INTO ls_verksomr_values.
          ls_ddlb-key   = ls_verksomr_values-key.
          ls_ddlb-value = ls_verksomr_values-text.
          APPEND ls_ddlb TO lt_ddlb.
        ENDLOOP.
        gr_ddlb_verksomr->set_selection_table( it_selection_table = lt_ddlb ).
      ENDIF.
      rv_valuehelp_descriptor = gr_ddlb_verksomr.
    ENDMETHOD.
    Thanks
    Swagatika

  • How to update zero to a column value when record does not exist in table but should display the column value when it exists in table?

    Hello Everyone,
    How to update zero to a column value when record does not exist in table  but should display the column value when it exists in table
    Regards
    Regards Gautam S

    As per my understanding...
    You Would like to see this 
    Code:
    SELECT COALESCE(Salary,0) from Employee;
    Regards
    Shivaprasad S
    Please mark as answer if helpful
    Shiv

  • I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

    I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

    Hi kamfong,
    Went to Settings where?
    If you want to use your exisiting Apple ID on your iPad, you need to:
    1.     Go to Settings>iTunes & App Store and sign out the new ID, and then sign on the old one
    2.     Go to Settings>iCloud, scroll to the bottom and delete the iCloud account, and the sign back onto iCloud using the old ID
    You still have not indindated why you are saying that using your old ID originally "didn't work". What do you mean by that? Did you get some sort of error when you tried to sign on with your exisiting Apple ID?
    Cheers,
    GB

  • I bought a relative's original iPad. I want to leave the apps on it and add my own pdfs to read. My itunes account is really for my iPod. the computer says that if I "Sync" the iPad will be erase, and become like my iPods. how can I just get my files onto

    I am a first-time iPad owner/user. I bought a relative's original iPad. I want to leave the apps on it and add my own pdfs to read. My itunes account is really for my iPod. iTunes message says that if I "Sync" the iPad will be erase, and become like my iPods. If I make a new iTunes account, would the apps be erased when I tried to use it?
    How can I just get my files onto this iPad, and still have the apps that my relative left there for me?
    Thank you.

    iPads sync to 1 computer only.
    All media and apps are tied to the Apple ID that purchased them.
    Without your relatives ID and password, you cannot update any of the Apps.
    I am pretty certain he is also violating Apples terms of service by giving you the apps.

  • I have an iPhone5 16 gb and a 120 gb iPod. All my songs won't fit on the iPhone of course. How can I just get some of them on the iPhone? I want to keep all my music on the iPod. I am VERY new to all this so be gentle and thanks.

    I have an iPhone5, 16 gb and a 120 gb iPod. All my songs won't fit on the iPhone of course. How can I just get some of them on the iPhone? I want to keep all my music on the iPod, but just want SOME of my music on the iphone. I am VERY new to all this so be gentle and thanks.

    You Sync the Music you want on the Phone via iTunes on your computer.
    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/

  • How can I just disable "navigation toolbar" completely for the App Tabs? I don't want to disable this for other normal tabs.

    How can I just disable "navigation toolbar" completely for the App Tabs? I don't want to disable this for other normal tabs. This is important as otherwise while I am in the app tab, i mistakenly start browsing from that tab and meaning of the app tab is completely lost...

    How can I view my full billing history for the app and music stores without iTunes installed?
    No.
    If my account has been compromised
    If you even think this may have happened, immediately change your password.
    See this -> Apple ID: Changing your password

  • I-tunes is note letting me access i-tunes store without first dowloading the new version of i-tunes. The problem is that my older operating system won't work and is not allowing the newer i-tune versions to work.  How can I just get use the old i-tunes?

    I-tunes is note letting me access i-tunes store without first dowloading the new version of i-tunes. The problem is that my older operating system won't work and is not allowing the newer i-tune versions to work.  How can I just get use the old i-tunes?

    Hi,
    Not sure if any of you above have managed to solve your problem or not but after coming across this same problem myself today as I am currently 'sofa bound' I decided to make it my mission to find a way around it.
    Initially I did think, having ready what seemed like a million questions and people with the same problem, that the only way was to buy OS X 10.5 ... HOWEVER, no. In among all these threads I found a jewel - Download I Tunes 9.2.1 which gets rid of the download itunes 10 advert and allows you to then buy from itunes again :-)  I am now one very happy lady.
    I apologise to all those that dont have older versions of OS X that maybe wont support even this upgrade but certainly for those like me with just 4yr old lap tops at least it means it not longer means buying a new one.
    Hope this helps son very frustrated people like myself - so much for apple support!

  • How can I ensure itunes purchases (music, apps) are paid using credits which show on the account instead of billed to my credit card?  Info indicates credit is used first but I just bought a song and it did not seem to be deducted from my credits.

    How can I ensure itunes purchases (music, apps) are paid using credits which show on the account instead of billed to my credit card?  Info indicates credit is used first but I just bought a song and it did not seem to be deducted from my credits shown on account.

    Hello how to use this,
    The article linked below details how to go about viewing your purchase history in the iTunes Store.
    See your purchase history in the iTunes Store
    http://support.apple.com/en-us/HT2727
    Cheers,
    Allen

  • How can i populate records using LOV value

    Create a form based on the following output use EMP Table
    Create a non Database Block i.e Control Block----> Dept No
    Create a Database Block -EMP
    Create an LOV for the Dept no from dept table.
    For the Current Dept No . Populate the Employee Records
    How can i populate records using LOV value????
    thanks

    Hi maddyd2k
    How can i populate records using LOV valueIt's not clear what u r trying to do create, create then want to...
    1.Pls Create a non-db item db set to > no named DEPT_NAME
    2. when creating the LOV assign the DEPT_NAME FROM DEPT table to that displayed item and u have also to assign the Dept No selected to the Dept No in the emp block
    To populate or display DEPT_NAME after Query - the If i got ur problem then - u need to cretae a Post-Query Trigger then use the following...
    BEGIN
    SELECT DEPT_NAME
    INTO :CONTROL_BLOCK.DEPT_NAME
    FROM DEPT
    WHERE Dept No = :Dept No;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN NULL;
    WHEN OTHERS THEN (ERRTXT);
    END;Hope this helps...
    Regards,
    Abdetu...

  • How can i copy files from one external hard disk to another using macbook pro with retina display

    How can i copy files from one external hard drive to another using macbook pro with retina display?

    That's odd - if you open Disk Utility (Applications->Utilities) and select the disk(s), how are they formatted? If you're only going to be used with your Mac, they should be formatted as "Mac OS Extended (Journaled)".
    Clinton

  • How can I use an American credit card to pay for a membership from outside the US?

    How can I use an American credit card to pay for a membership from outside the US? My payment page is set up for Japanese credit cards. I can't change to the US store, because the "Select a Store" page just jumps to the "Products" page.
    Has anyone else had this problem? Any help would be much appreciated!

    Hi Batt5721,
    Welcome to Adobe Forums.
    The address and the country on the Credit Card should match the billing address then only payment would be possible.
    Thanks
    Garima

  • How can I find a data base table containing a GUID, which is result of the macro's execution?

    Hello,
    please help me to understand how the macros work. I am facing database inconsistency. The CRM-system retrieves a GUID of an opportunity’s item and checks its existence. However, this GUID (here it is es_info-ref_object) does not exist. As result, an exception is triggered.
    I am trying to figure out which data base table is responsible for the inconsistent data. Instead of SELECT statement, I see in the debugger that a macro retrieves the “guilty” entry .
    macro_execute macro_msg_data_read_rea.
    My Question: How can I find a data base table containing a GUID, which is result of the macro’s execution?
    Thanks a lot
    Andrej

    When you save a PDF out of Distiller it doesn't just have different options, it's an entirely different program. It doesn't do things the same way, so it can't have the same options. Saving from Distiller is in many ways better, expecially in that transparency isn't flattened.
    What specific options are you looking for?

  • How can I actually PLAY a game on my iPhone 6?  When I GOTO the Game Center and click games, all I get is the screen with leaderboards, stats, etc

    How can I actually PLAY a game on my iPhone 6?  When I goto the Game Center and click on games, then click on a specific game (solitaire, for example), all I get is the leaderboards, achievements and player screen.  All I want to do is launch the game.

    Hi Jordanali!!!
    Game Center is just simply used for what you are seeing, leaderboards and stats between your friends and yourself.
    To launch an app, first download it from the app store, then just tap the icon on the home screen when it is done downloading!!!
    I hope that answers all of your questions!

Maybe you are looking for