How can I know my pass code pleas?
How can I know my pass cod?pleas help me
Hi
If you have forgotten your passcode there is no way of finding it out again unless you remember it, to reset it see here:
http://support.apple.com/kb/HT1212
Hope this helps
Similar Messages
-
How can we know the return code of BDC Program ?
Hi All,
Please tell me : How can we know the return code of BDC Program when being exceuted in Session or in Transaction mode.
In my program, we are uploading data from Excel sheet to SAP via BDC
The records that are not updated we want to create a log file.
Now to know whether a record is updated ot not, wat syst field shloud be used?
Its urgent....
<b>Reward Point will be there ....</b>
Thanks,
HarishHi harish,
try the logic in this code ...
i had attached input file in the end.
TYPES: begin of errmess,
msgnr type t100-msgnr,
text type t100-text,
end of errmess.
TABLES : t100.
DATA: BEGIN OF DD_VA01,
AUART TYPE VBAK-AUART,
KUNNR TYPE RV45A-KUNNR,
BSTKD TYPE VBKD-BSTKD,
MABNR TYPE RV45A-MABNR,
KWMENG(2) type C,
KBETR(2) type C,
END OF DD_VA01.
DATA:IT_VA01 Like TABLE OF DD_VA01,
WA_VA01 Like LINE OF IT_VA01,
WA_VA01_F Like LINE OF IT_VA01,
IT_BDCDATA TYPE TABLE OF BDCDATA,
WA_BDCDATA Like Line OF IT_BDCDATA,
W_FNAME TYPE STRING,
messtab like bdcmsgcoll occurs 0 with header line,
it_errmess type table of errmess,
wa_errmess like line of it_errmess,
err_message type string.
data: zf1 type i,
zc1 type c value '2',
fn(20) type c.
Main Code ************************************************************
PERFORM get_input using 'C:\Documents and Settings\ic881592\Desktop\Daran_bdc_VA01-e.txt'.
SORT IT_VA01 BY AUART KUNNR BSTKD.
LOOP AT IT_VA01 INTO WA_VA01.
if WA_VA01_F-AUART <> WA_VA01-AUART OR
WA_VA01_F-KUNNR <> WA_VA01-KUNNR OR
WA_VA01_F-BSTKD <> WA_VA01-BSTKD.
PERFORM set_header_flag.
PERFORM create_bdc_header_data.
endif.
PERFORM create_bdc_item_data.
ENDLOOP.
PERFORM call_transaction.
PERFORM errorlog.
Procedures ***********************************************************
form get_input using w_fname.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = W_FNAME
HAS_FIELD_SEPARATOR = '#'
TABLES
DATA_TAB = IT_VA01.
endform.
form call_transaction.
PERFORM bdc_field using 'BDC_OKCODE' '/11'.
CALL TRANSACTION 'VA01' USING IT_BDCDATA MODE 'A' messages into messtab.
refresh it_bdcdata.
endform.
FORM set_header_flag.
WA_VA01_F-AUART = WA_VA01-AUART.
WA_VA01_F-KUNNR = WA_VA01-KUNNR.
WA_VA01_F-BSTKD = WA_VA01-BSTKD.
if zf1 = 1.
PERFORM call_transaction.
endif.
zf1 = 1.
endform. "set_header_flag.
form create_bdc_header_data.
perform bdc_dynpro using 'SAPMV45A' '0101'.
perform bdc_field using 'VBAK-AUART' WA_VA01-AUART.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'KUAGV-KUNNR' WA_VA01-KUNNR.
perform bdc_field using 'VBKD-BSTKD' WA_VA01-BSTKD.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_CURSOR' '04/06'.
perform bdc_field using 'BDC_OKCODE' '=CHOO'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE' '=POAN'.
endform. "create_bdcdata
FORM create_bdc_item_data.
CONCATENATE 'RV45A-KWMENG(' zc1 ')' INTO FN.
perform bdc_field using 'BDC_CURSOR' FN.
perform bdc_field using FN WA_VA01-KWMENG.
CONCATENATE 'KOMV-KBETR(' zc1 ')' INTO FN.
perform bdc_field using FN WA_VA01-KBETR.
CONCATENATE 'RV45A-MABNR(' zc1 ')' INTO FN.
perform bdc_field using FN WA_VA01-MABNR.
perform bdc_dynpro using 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE' '=POAN'.
ENDFORM.
form errorlog.
LOOP AT MESSTAB .
if MESSTAB-MSGNR = '311' or MESSTAB-MSGTYP = 'E'.
SELECT SINGLE msgnr text FROM T100
into wa_errmess
WHERE SPRSL = MESSTAB-MSGSPRA
AND ARBGB = MESSTAB-MSGID
AND MSGNR = MESSTAB-MSGNR.
IF SY-SUBRC = 0.
err_message = wa_errmess-TEXT.
IF err_message CS '&1'.
REPLACE '&1' WITH MESSTAB-MSGV1 INTO err_message.
REPLACE '&2' WITH MESSTAB-MSGV2 INTO err_message.
REPLACE '&3' WITH MESSTAB-MSGV3 INTO err_message.
REPLACE '&4' WITH MESSTAB-MSGV4 INTO err_message.
ELSE.
REPLACE '&' WITH MESSTAB-MSGV1 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV2 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV3 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV4 INTO err_message.
ENDIF.
CONDENSE err_message.
WRITE: / MESSTAB-MSGTYP, err_message .
ELSE.
WRITE: / MESSTAB.
ENDIF.
endif.
ENDLOOP.
endform. "errorlog
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO = DYNPRO.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
input file :
OR 2148 0001235 R-1162 8 17
OR 2148 0001235 R-1161 2 30
OR 2148 0001235 100-400 6 25
OR 2148 0001235 R-1162 4 12
OR 2148 0001236 R-1162 3 12
OR 2148 0001236 R-1161 2 30
OR 2148 0001236 100-400 1 25
OR 2148 0001236 R-1162 7 12
OR 2148 0001236 R-1161 8 30
OR 2148 0001236 100-400 10 25
OR 2148 0001235 R-1161 5 30
OR 2148 0001235 100-400 2 25
OR 2148 0001235 R-11621 3 12
OR 2148 0001235 R-1161 2 30
OR 2148 0001235 100-400 1 25
OR 2148 0001235 R-1162 7 12
OR 2148 0001235 R-1161 8 30
OR 2148 0001235 100-400 10 25
OR 2148 0001236 R-1162 8 17
OR 2148 0001236 R-1161 2 30
OR 2148 0001236 100-400 6 25
OR 2148 0001236 R-1162 4 12
OR 2148 0001236 R-1161 5 30
OR 2148 0001236 100-400 2 25 -
I have entered the wrong numbers to put my phone in pass code lock. However, I didn't set the autolock....how can I get the pass code lock reset?
Your only choice is to place the phone in DFU mode (search Google for instructions) and restore as a new device. You will lose all your data.
-
HT1430 How can I retrieve my pass code?
How can I retrieve my pass code?
My Ipad mini is disabledTry this first - I saw a recent post where a user with the same problem after an iOS update used his Apple ID password.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
How can I know my restiraction code?
How can I know my restiraction code?
If you lost the code you need to restore the phone as new and not from a backup. There is one way I know of to reset or chnage the restrictions code and that is to use a new feature of iphonebackup extractor software on your computer
Read this
http://www.iphonebackupextractor.com/blog/2013/apr/24/reset-ipad-iphone-restrict ions-passcode -
How can i know what redemtion code i have ?
how can i know what redemtion code i have ?
You read the email from the vendor who sent you the code if you purchased online, or you look at the box you bought with a redemption card inside if you bought in a store
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html -
I forgot my password in the restrictions settings. I have 8 failed attempts now. How can I reset the pass code?
YOU CAN ALSO FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again. -
HOW CAN I KNOW THE FUNCTION CODE OF CREATE NEW SESSION
<b>HOW</b> CAN I KNOW THE FUNCTION CODE OF CREATE NEW SESSION?
THANKS...Hi
Please put a "/n" (to open a new session after killing the current session)
or "/o" (to open a new session without killing the current session)
or "/i" (to end the current session) before the below T Codes as per your requirement...
Try thistoo <b>O0</b>
<u><b>demo-like programs</b></u>
RSIMC000
RSIMC001
RSIMC002
RSIMC003
RSIMCTRX
RSIMCTST
Reward all helpfull answers
Regards
Pavan -
How can we know the source code no.of lines
hi guys!
please help me, how can we check the source code(No. of lines)in program with out commentshi,
Use this code. Replace with your program name with the text in bold. V_lines gives the no of lines of code excluding comments and as well blank lines.
TYPES: BEGIN OF t_type,
line(72),
END OF t_type.
DATA: program LIKE sy-repid
VALUE <b>'Z_ABC_INNER_JOIN'</b>,
t TYPE STANDARD TABLE OF t_type WITH HEADER LINE.
DATA: v_lines TYPE i.
READ REPORT program INTO t.
IF sy-subrc =0.
LOOP AT t.
IF t+0(1) = '*' OR t IS INITIAL.
DELETE t INDEX sy-tabix.
ENDIF.
ENDLOOP.
DESCRIBE TABLE t LINES v_lines.
ENDIF.
WRITE : v_lines.
Regards,
Sailaja. -
forget my i phone in my friends house and she knows how to unlock it how can i change my passcode without my iphone.
If the "Find My iPhone" feature was already setup on the device, log in via iCloud.com and remotely lock the device. Otherwise nothing can be done.
-
How can I cancle my pass code?
I don't want to have to enter a pass code to use my phone but one is entered . How can I remove it ? Thank you
There is really no need for you to be so sarcastic to the person asking the question (or any person for that matter). Why are you here if not to help someone with a question? That was just uncalled for.
-
How can I retrieve my pass code for restrictions?
For the life of me I can't seem to recall the four digit pass code I used when I go to restrictions. I have tried several attempts but none work. Is there a way to retrieve that information?
There is no recovering forgotten passwords.
You want access to restrictions, restore the iPad. -
How can I reset my Pass Code?
My Ipod touch is Disabled because I have entered the Pass cod wrong too many times. I do not remember the code.
Forgot an iPhone Passcode? How to reset the iPhone passcode
iPhone and iPod touch- Wrong passcode results in red disabled screen
IPod Touch user guide -
How can i know nokia 6300 code?
Hi all,
i am trying to find nokia 6300 code to check if i can update but for some reson i can't find it under the battery.. in other nokia it was no problem for me... in the 6300 i have no "code".
please help
thanksnot totally sure what you are looking for with the code, but type to phone screen *#0000# maybe you get what you are looking for ?
-
HT2731 how can i unlock my pass code
how do i unlock my passcode
Passcode for what ? If you've forgotten the passcode to unlock/open one of your devices then you will need to connect it to the computer that you normally sync to and you should then be able to reset the device and re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the device into recovery mode : http://support.apple.com/kb/ht1808
If you do it via a different computer then :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
Maybe you are looking for
-
How do I add a partner/spouse to an address label?
I'm doing Christmas cards and I would like to print address lablels. Living in the 21st century, not all people in my address book are married couples. I have friends who are either same sex or opposite sex couples living together. I want both names
-
How to lock multiple user for a transcation code at same time is der any tc
how to lock multiple user for a transcation code at same time is der any tc suppose i hav 15 user and i want to lock 10 user for mm02 who can i to it
-
Changes in iWEB '08 are NOT making it to my published iWeb site
Never had this issue with earlier versions. I run iWeb to make changes in pages that I have had up for months. iWeb says the changes are published. When I go here: http://web.mac.com/tyreeford/Site/Resume.html The changes are there. When I use Safari
-
Can anyone help with a basic billing question? Verizon has shown they cannot.
Duplicate discussion - please visit: https://community.verizonwireless.com/thread/808960 Message was edited by: Admin Moderator
-
After my latest update Aperture now asks for a serial number. This is a little strange as when you buy it from the app store you don't get one. Well not one you can see. So now can't use it. What am I supposed to do? Ricky-2012