How can i know the month and year when my ipod classic was manufactured ?
assuming i only have its serial no.
Hi Ralf,
here's a complete example:
DATA: last LIKE sy-datum, "ultimo of last month
gjahr LIKE t001b-frye1,
buper LIKE t001b-frpe1.
last = sy-datum - sy-datum+6(2) .
PERFORM check_period.
IF sy-subrc <> 0.
ADD 1 TO last . "-> next month
PERFORM check_period.
IF sy-subrc <> 0.
MESSAGE a001(00) WITH 'no open fi period'.
ENDIF.
ENDIF.
*formatting for germany
CONCATENATE last+6(2) last+4(2) last(4) INTO bbkpf-budat.
WRITE: / bbkpf-budat.
FORM check_period.
MOVE last(4) TO gjahr.
MOVE last+4(2) TO buper.
CALL FUNCTION 'FI_PERIOD_CHECK'
EXPORTING
i_bukrs = bbkpf-bukrs
i_gjahr = gjahr
i_koart = '+'
i_monat = buper
EXCEPTIONS
error_period = 1
error_period_acc = 2
OTHERS = 3.
ENDFORM. " check_period
regards <a href="https://www.sdn.sap.com:443/irj/servlet/prt/porta
l/prtroot/com.sap.sdn.businesscard.SDNBusinessCard?u=i
Wo3ssHlIihvCrADIEGqaw%3D%3D">Andreas</a>
Message was edited by: Andreas Mann
Similar Messages
-
How can i get the month and year of the current open Periode?
At the beginning of each month the booking period for the new month was not open,but i need to book material automatically with the last day of the old month. The booking period will change at the first working day between 13 and 17 a clock. when the booking period was changed i have to book with the current date.
How can i do this ??
Regards
RalfHi Ralf,
here's a complete example:
DATA: last LIKE sy-datum, "ultimo of last month
gjahr LIKE t001b-frye1,
buper LIKE t001b-frpe1.
last = sy-datum - sy-datum+6(2) .
PERFORM check_period.
IF sy-subrc <> 0.
ADD 1 TO last . "-> next month
PERFORM check_period.
IF sy-subrc <> 0.
MESSAGE a001(00) WITH 'no open fi period'.
ENDIF.
ENDIF.
*formatting for germany
CONCATENATE last+6(2) last+4(2) last(4) INTO bbkpf-budat.
WRITE: / bbkpf-budat.
FORM check_period.
MOVE last(4) TO gjahr.
MOVE last+4(2) TO buper.
CALL FUNCTION 'FI_PERIOD_CHECK'
EXPORTING
i_bukrs = bbkpf-bukrs
i_gjahr = gjahr
i_koart = '+'
i_monat = buper
EXCEPTIONS
error_period = 1
error_period_acc = 2
OTHERS = 3.
ENDFORM. " check_period
regards <a href="https://www.sdn.sap.com:443/irj/servlet/prt/porta
l/prtroot/com.sap.sdn.businesscard.SDNBusinessCard?u=i
Wo3ssHlIihvCrADIEGqaw%3D%3D">Andreas</a>
Message was edited by: Andreas Mann -
How can I know the end of DataInputStream when I use readUTF()
I use the readUTF() method of DataInputStream in client to read String from server
I use catch EOFExcetpion to let the client know the end of the InputStream(that is when the server close its socket) , however it seems that donen't work
what can I do ?
class client
public void method()
DataInputStream in=new DataInputStream(socket.getInputStream);
try{
try{
while(true)
String temp= in.readUTF();
System.out.println(temp.charAt(.........));
}catch( EOFException e){}
}catch(IOException ioe){}
}when server closes , it seems that the" System.out.println "sentence keep going
the above is the simplified version, the original one is too long to put hereI think the readUTF method will straight away return you the whole content as a string and you don't have to put it in a loop.
The EOF Exception will be thrown only when the stream reaches the end before reading all the bytes.
Thanx and Regards,
Anish K George -
I am missing some music on my computer and Iphone. I do have the music on my ipod classic. How do I transfer the music from my ipod to my computer?
If it's music purchased from iTunes then connect the iPod to your computer's iTunes and do File > Devices > Transfer Purchases, or you may be able to redownload it on your computer's iTunes via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage (whether you can redownload music depends upon what country that you are in, and whether it's still in your store).
For music from other source (e.g. copied from sources), then if you don't have a copy of it anywhere (e.g. on an external drive) then there are some programs listed half-way down this page which should be able to copy them back : https://discussions.apple.com/docs/DOC-3991 -
How can I change the song's order on my iPod Classic?
I mean, now songs are stored by alphabetic order or number (in Album). I would like change this order, for ex. by stars, like in iTunes.
I have an 6.5 generation iPod Classic, with my previous iPod 5.5 if i changed the order in iTunes also in my iPod songs were displayed in that order.
Is there any funcion to do that?Yuo can create a playlist with your desired sort order, right-click on the playlist name and click Copy to Play Order, then sync it to the device. You can play that list in your order, but everywhere else the tracks will play in track number order or alphabetical order depending upon which menu path you used to choose them.
tt2 -
How can i know the Authorization and Authentication in BusinessOne?
Hi all,
I want to know about the User Autherization and Authentication of a particular User. In which table or file this information is stored?
In CPRF Table i am getting only UI Related Authorization information. That is not clear too.
But i need particular users Authentication and Autherization information for each Object(SalesOrder, SalesInvoice,....).
Thanks in advance,
RAMU.I think this 2 posts will be helpfull:
Regards,
Ibai Peña
PS: mixed the first link... I though it was a link to a thread where said same as Sebastien. Sorry.
Message was edited by: Ibai Peña -
How can I know the answer and reset the security questions!
Hi,I want to buy some apps today.
While I was ready to purchase , the store ask me to answer my security questions.
But I had already forgot my answer !
Now I can't purchase any app, help ! Thanks!You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(108093) -
hello my iphone 3gs just been stolen how can i block the iphone and how could i track it i don't know for sure if i have find my iphone? please help i got many accounts on it and i don't have a passcode :((
It was never free for the 3GS.
It is if the initial sign-up is done on an iPhone 4, iPad or iPod touch 4th gen.
From http://support.apple.com/kb/HT4436:
After I sign up for Find My iPhone for free, can I use it on other iOS devices?
Yes, if your devices are running iOS 4.2. For example, you can sign up for Find My iPhone for free on your iPad and use the same account information to sign in to MobileMe on your iPhone 3GS and turn on Find My iPhone. -
I have lock iPhone 5 from Japan, i don't know from which carrier it is belongs to. currently I am in Saudi Arabia, how can i unlock the phone and use here)
<Personal information edited by Host>You can't.
-
Is there a limit for the apps that i purchased or i can purchase as much i want? and how can i know the capacity it's taking? Thank you
Yes you can buy whatever you want if your credit card is in good standing.
Before you buy, read the size of the download in iTunes/App/iBook Store.
Rule of thumb, you need to reserve about 10% of your total space. -
My beautiful teens tried to decode my iphone and got me up to 22,000 minutes to reset my old iphone that i now use as a radio to listen to pandora music. how can i reset the setting and bypass the disabled msg
If you want to Restore iPhone Firmware. Open iTunes on computer. Connect iPhone to computer with USB Cable. Then hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Then click Restore button of iTunes.
-
How can I use the battery and let it be perfectly healthy?
Hello everybody!
I love this forum because everyone is a great helpful person.. .. However, I'd like to ask you couple things about the MacBook battery...
I know that now the battery has been improved, it leasts longer and it can support 1000 charging cycles.
(Right now I'm performing the battery calibration)
I'd like to know how can I use the battery and let it be perfectly healthy.
For instance,
1) If I connect the laptop to the MagSafe and let it charge, when should I remove the plug from the Mac and when should I put it in charge? I don't wanna continously waste cycles and let my battery die too soon (it's too young to die! :-D ) .. I use it mainly at home connected to the MagSafe: someone tell that even if you leave the MagSafe connected after the mac has been charged it stops charging (I can see this), and others say that is not a good thing to let the mac connected to the plug for a long time... with the old model I used to disconnect the battery from the mac so I didn't have these problems but with the new one it's a long procedure...
2) I usually use to calibrate the battery once a month... Is it a good thing?
Thanks!
AndreaEverything you need to know about your battery is contained in this User Tip from frequent poster neuroanatomist:
http://discussions.apple.com/thread.jspa?threadID=1764220 -
How can you automate the monthly opening of MM periods
How can you automate the monthly opening of MM periods ????????????
RMMMPERI accepts a period/year or a date.
If you enter a date the period is derived by it.
1. create a variant and check the attribute 'selection variable' for the parameter date. Then click the button 'Selection variables' and set the current date. Every time this variant is used the parameter DATE is filled with the current date.
2. create a job for RMMMPERI with the variant created in the preceding step. Set it as periodic.
If you're not using a fiscal year variant simply schedule it as monthly (to be executed the first day of the month).
If you are using a fiscal year variant you'd have to define a calendar with only the first day of each period defined as working
day and use it in the periodicity restrictions.
Another possibility:
Write a very simple ABAP which run daily to check if the period has changed and submit RMMMPERI.
Regards
Chander -
How can i know the RPM of my HD?
I guys...
Simple question...
How can i know the RPM of my HD?
I have a Mac mini and i would like to know that.
Any ideas?.
Thanks so much!!!Hi!!
It doesn't show...
Vendor: NVidia
Product: MCP79 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.20 Supported
FUJITSU MHZ2120BH G1:
Capacity: 120.03 GB (120,034,123,776 bytes)
Model: FUJITSU MHZ2120BH G1
Revision: 00810009
Serial Number: K64PT9427599
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Lower
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Capacity: 209.7 MB (209,715,200 bytes)
Writable: Yes
BSD Name: disk0s1
Macintosh HD:
Capacity: 119.69 GB (119,690,149,888 bytes)
Available: 21.38 GB (21,376,569,344 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
FUJITSU MHZ2120BH G1:
Capacity: 120.03 GB (120,034,123,776 bytes)
Model: FUJITSU MHZ2120BH G1
Revision: 00810009
Serial Number: K64PT9427599
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Lower
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Capacity: 209.7 MB (209,715,200 bytes)
Writable: Yes
BSD Name: disk0s1
Macintosh HD:
Capacity: 119.69 GB (119,690,149,888 bytes)
Available: 21.38 GB (21,376,569,344 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Those are the 2 texts...
Any idea?
Thanks!! -
How can i Know the email linked to icloud
Please can anyone help me how to know teh email linked to my phone ??
it shows me h********@hotmail.com i tried to logged in with my account that belong to h********@hotmail.com and it says inocrrect password or email i tried to reset my id but no reset mail was sent to my email ..
so i tried to creat a new with the existing email addreess and it works and verified and finally i tried to activate it with h********@hotmail.com with the new passs and it says account cannot be activate with h********@hotmail.com it is linked to another account ..
so please how can i know the linked email to my phone
Thank youWelcome to the Apple community jorjh.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.
Maybe you are looking for
-
Crw32.exe has encountered a problem and needs to close
approximately every 1 and 1/2 to two months I have to uninstall Crystal Reports XI and re-load release 2. The program works fine then starts acting funny (cursor will not change when making text box longer/shorter, Can only make sections larger/shor
-
How to select my country's app store on iPad when abroad?
I have an account in the Dutch app store, but am currently in Sinagpore. When I try to buy a Dutch newspaper using Newsstand on my iPad, I get the message: 'This article is not available from the Singapore store, please use the Dutch store'. I do not
-
Thumbnail preview works in adobe reader 9 but does not work in adobe 8.0
I have small issue. Thumbnail works in adobe reader 9 but but does not work in adobe acrobat 8.0 in win xp
-
I forgot my iphone's password and it is disabled now because i tried so many times to open it. Now it's saying "your iphone is disabled and connect to itunes" i connected it to itunes and clicked restore. How long will it take for my phone to restore
-
Here's my dilemma. I have a new Mac Mini - a week old. I installed Windows 7 on it using Mac's Bootcamp assistant. I then set up and configured my Windows 7 world and everything worked fine. No issues logging in between Lion or Win7 via the resta