How can I lock the Labview program in runing mode?
Hello
I want lock my program in running mode. can you help me to know how it is possible?
when we design a program for a user, maybe a child or ane person change the program or stop it, or change the value like an array. is it possible to lock the progran in running mode?
thank you
Best Regards
behzad1 wrote:
Hello
I want lock my program in running mode. can you help me to know how it is possible?
when we design a program for a user, maybe a child or ane person change the program or stop it, or change the value like an array. is it possible to lock the progran in running mode?
thank you
Best Regards
I have attached a primitive example, it should give you some idea, maybe it helps. Of course i put it together quick, so the style is not nice
The password is a string, visible on the block diagram, so password protect the block diagram via the "VI properties". Also, change the "Window appearance" to custom, where the closing "cross" is disabled ("Allow user to close window"), and you also hide the abort/pause buttons...
Of course if you build an exe, the story is different...
These steps should give a minimal protection against children and evil colleagues
Attachments:
lock_unlock_FP.vi 42 KB
Similar Messages
-
how can i do with labview program,when i have 20 different values,and 1 want to add it with constant value.and how to get the results?
Why do the 20 values have to be different? The same code should work even if some are equal.
What do you mean by "get the result"? The result is available at the output terminal and all you need is a wire to get it where you need it. That could be an indicator, another operation, or even a hardware device.
What is the data type of the 20 values? An array? A cluster? A bunch of scalars? A waveform? Dynamic data?
LabVIEW Champion . Do more with less code and in less time . -
How can I use the LabVIEW Symbol Editor as a Sub-VI?
How can I use the LabVIEW Symbol Editor as a Sub-VI?
mc-hase wrote:
> Thank you for your ansver.
> That means that you see no possibiltiy to use the built in window? (I
> think the built in window is programmed with LabVIEW as well...)
The icon editor at least up to version 7.0 of LabVIEW is not written as
VI but directly implemented inside LabVIEW, which is written in C/C++.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
How can we lock the table?? how can we lock the record
Hi
how can we lock the complete table?? how can we lock the record ?/
Thanks
RamaLock objects are used to lock the database table while making the modifications on the database table.
you can create your own lock objects using SE11.
if you create lock objects on any table system will create two function modules.
1.ENQUEUE....
2.DEQUEUE.....
first one is used to lock the table
second one used to removing lock on the table.
lock Table
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
tabname = table_name
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
Unlock Table
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
tabname = table_name
check this link :
http://help.sap.com/saphelp_40b/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
_SCOPE = 1: The lock is not sent to the update program. The lock is removed when the transaction is ended.
_SCOPE = 2: The lock is sent to the update program. The update program is responsible for removing the lock. The dialog program which requested the lock no longer has an influence on the lock behavior. This is the standard setting for the ENQUEUE function module.
_SCOPE = 3: The lock
Re: lock objects
Reward if this helps. -
How can i find the printing program?
hi
i have sap script how can i find the printing program ?
amiami bardogo wrote:
hi
what is the different between the commands 'break' and 'break-point'
thanks,
ami
h2 Breakpoints h2
Apart from being able to execute an ABAP program in the Debugger, you can also start the Debugger call by the choosing a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For more information, refer to the chapter Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
A user-specific breakpoint is inserted in the source code as an ABAP statement using the keyword BREAK-POINT. A non user-specific breakpoint is set in the ABAP Editor using the BREAK user name statement.
Directly set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger by double-clicking a line, for example. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statements
The Debugger stops the program immediately before the specified statement is executed.
Breakpoints
at subroutines
The Debugger stops the program immediately before the specified subroutine is called.
Breakpoints at function modules
The Debugger stops the program immediately before the specified function module is called.
Breakpoints at methods
The Debugger stops the program immediately before the specified method is called.
Breakpoints at exceptions and system exceptions
The Debugger stops the program immediately after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are always user-independent if there is no specification of a user name. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application when program execution is always to be interrupted at the same place. For more information, refer to the chapter Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints because you can deactivate or delete them at runtime. They have the following advantages:
· You do not have to change the program code.
· You can set them even when the program is locked by another programmer.
· You can define a counter that only activates the breakpoint after it has been reached.
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For more information, refer to the chapter Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they remain in effect during the entire user session if they are saved by choosing the menu path Breakpoints ® Save in the ABAP Debugger. For more details on the subject of user sessions and modes, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
For further information on special breakpoints, refer to:
Breakpoints at Statements
Breakpoints at Subroutines
Breakpoints at Function Module Calls
Breakpoints at Methods
Breakpoints at System Exceptions
h2 page break h2
WINDOW TYPES
When defining a layout set window, you must select a window type for the window. You can choose between three types:
Constant windows (CONST)
Variable windows (VAR)
Main windows (MAIN)
CONSTANT WINDOW
A window of type CONST has the same contents and size on all layout set pages, on which a corresponding page window is defined. This allows the processing of the window contents to be optimized internally.
Page windows whose allocated window is of type CONST must have the same size throughout the layout set. If a window of type CONST is full, all remaining text the application program wants to output in this window, is lost. Constant windows do not trigger a page break. In other words: all text exceeding the window size is simply truncated.
VARIABLE WINDOW
The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different layout set pages.
As far as the processing of the window contents is concerned, the system currently treats constant and variable windows alike. The only difference is that constant windows have the same size throughout the layout set.
MAIN WINDOW
Each layout set must have one window of type MAIN. Such a window is called the main window of the layout set. For SAPscript layout sets, the main window has a central meaning:
It controls the page break.
It contains the text body that may cover several pages.
It allows to fix text elements at the upper and lower margins of the allocated page window (for example, for column headings).
As soon as a window of type MAIN is full, SAPscript automatically triggers a page break and continues to output the remaining text in the main window of the subsequent page. Page windows of type MAIN have the same width throughout the layout set. The SAPscript composer thus avoids reformatting of the text after each page break.
If a page does not have a main window, the system implicitly processes all other windows of the page and continues with the subsequent page. This page must not call itself as subsequent page (recursive call), since this would produce an endless loop. In such a case, SAPscript terminates the output after three subsequent pages.
HOW THE COMPOSER WORKS
The composer or layout set processor is the central formatting module for the print output. It prepares the texts for the different output devices by using the allocated styles or layout sets.
Processing a layout set happens in a certain order. You must know some facts concerning the different window types, the setting of subsequent pages, or the dynamic control from within the print program.
Page control in layout sets
Define subsequent page statically
Define subsequent page dynamically
Format a layout set page
PAGE CONTROL IN LAYOUT SETS
SAPscript automatically triggers a page break as soon as the main window of one page is full. To be able to execute the page break, the system must know on which subsequent page to continue outputting the text. You can specify the subsequent page either statically when defining the layout set, or you can set the subsequent page dynamically during layout set output.
If the subsequent page is not specified, SAPscript automatically terminates printing, thereby ignoring any other output statements of the application program.
DEFINE SUBSEQUENT PAGE STATICALLY
You define the subsequent page statically with the layout set maintenance transaction. First, specify the start page in the layout set header. The system automatically calls this page whenever the layout set is started. With this page, or, more correctly, with the page window of this page, the text output starts. For each page, specify the subsequent page in the page definition. After a page break, the system continues text output on the subsequent page defined for the last page. By specifying start page and subsequent pages, you can define a page sequence.
DEFINE SUBSEQUENT PAGE DYNAMICALLY
The page sequence set in the layout set definition can be changed by the application program dynamically at runtime. If you want the layout set to start with a page other than the one defined in the layout set header, specify the desired start page using the parameter STARTPAGE when you call the function module START_FORM. However, this new start page is valid only for the current call of the function module.
If you want to break to a subsequent page other than the one specified in the page definition, use the control statement NEW-PAGE to set the name of the new page.
NEW-PAGE .
NEW-PAGE ends the output on the current page. The new subsequent page is only valid for the current call of the control statement. You can either include the control statement explicitly into the text of a text element or pass it to the layout set output using the function module CONTROL_FORM.
FORMAT LAYOUT SET PAGE
The process of formatting the output is controlled by the text contents in the BODY area of the main window. If the main window is completely filled, or if the control statement NEW-PAGE appears in the main window, the system executes a page break. Only at this point in time the system formats the contents of the windows of the other types and replaces the variables with the current values.
For each other window, the system first outputs the default text element, if it exists. Then it processes and formats the list of the active text elements of this window, which you set using the function module WRITE_FORM with the parameter FUNCTION (SET, APPEND, DELETE). Any text that does not fit into the page window is truncated.
As a consequence to this processing order of the composer, the reservation of space for the TOP and BOTTOM areas must be made beforehand. If the BODY area of the main window already contains text, a new text output to the TOP area does not appear on the current page but on the subsequent page in the TOP area. The same applies for the BOTTOM area. If the BODY area is filled to such an extend that the new BOTTOM text no longer fits into the current main window, this text appears on the subsequent page in the BOTTOM area.
A frequent error in application programs is that for the subsequent page (for example, NEXT) of a layout set no main window is defined. If the formatted text of the previous page did not fit into the corresponding main window , the composer searches the subsequent pages for a main window to output the text remainder. However, if the subsequent page of NEXT is NEXT again, the composer encounters an endless loop.
To be able to create correct page breaks in longer text, you should define a main window on each layout set page.
LAYOUT SET CONTROL
To output SAPscript layout sets, in the print program you must always start the output with OPEN_FORM and end it with CLOSE_FORM. The function module OPEN_FORM initializes the SAPscript composer and opens the specified layout set for subsequent output. The system combines all output for this layout set up to the CLOSE_FORM to one print request. If CLOSE_FORM is missing, nothing will be printed.
To output data in a layout set, you must use the SAPscript function modules WRITE_FORM, WRITE_FORM_LINES, and CONTROL_FORM. You can use these function modules any number of times in any order between opening and closing a layout set.
You cannot use the ABAP/4 statement WRITE to write output to a SAPscript layout set.
Several print requests
Start a layout set again
Switch layout sets
Find layout sets
SEVERAL PRINT REQUESTS
Within one transaction, you can open and close several layout sets using OPEN_FORM and CLOSE_FORM, however not simultaneously. You can use parameters in the OPEN_FORM to control whether the output is stored in the same print request. But also the SAP spool decides, depending on several plausibility checks, whether new output is appended to an existing print request or whether to create a new print request anyway.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
You cannot combine ABAP/4 list output and SAPscript output in one print request.
START A LAYOUT SET AGAIN
Usually a print program does not print only one urging letter or one account statement, but several layout sets for different customers. To have the output for each customer begin with the start page of the layout set, you must start the current layout set again and again.
To start a layout set again, you must first end the current layout set and then open the layout set again. Within one print request, first call the function module END_FORM. It executes the final processing for the current layout set. Then start the layout set again using START_FORM. Output then begins again on the start page of the desired layout set.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION CLOSE_FORM
If you use START_FORM and END_FORM, you must not specify a layout set for OPEN_FORM. However, in this case you can use the SAPscript output functions only after opening a layout set with START_FORM. -
How can we disable the 'Improvement Program' from all the apps in TCS5?
How can we disable the 'Improvement Program' from all the apps in TCS5, so that the end users are not able to see the option in the help menu?
We have tried changing the value of bUsageMeasurement (HKLM\SOFTWARE\Policies\Adobe\(product name)\(version)\FeatureLockdown) to zero, but it did not help.You’re probably going to have to contact Support on that one.
-
How can I lock the file in use
Dear All, I transfer the large text file to Solaris 10 server and copy the this file with transfer not success to another path. but I can open the file with end of file. How can I lock the file with transfer not successfully.
Locking on UNIX is cooperative, not manditory. That means that all applications need to check for the lock explicitly and then not use the file if the lock exists.
But if something is accessing the file beyond your control, locking isn't going to prevent it.
If you do control all the access points, then take a look at lockf or flock functions.
Darren -
How can I lock the object in my dock?
Members in my family continue to accidently drag objects off the dock on my powerbook by accident.
How can I "lock the dock"?
Thanks.You can't. This is a real problem when you accidentally drag 300+ files onto an application icon but miss...
Matt -
I use 2 monitors how can I lock the dock to keep it from sliding over to next monitor?
I use 2 monitors how can I lock the dock to keep it from sliding over to next monitor?
I found the answer in the "more like this" area. Thanks for helping.
-
got macbook stolen, got creative cloud on the stolen mac. Got myself a new mac and installed creative cloud on that computer. How can i lock the creative cloud membership on the stolen mac. I do not have iCloud on the stolen mac.
And will the thievs be able to purchase things from itunes or adobe with my cardinfo? I have a password who comes up overtime i download anything, but i never used itunes on buying things. I just registred there.What is iCloud, and did you ask Apple about their "I" product? (The Cloud is not iCloud, whatever that may be)
Remove license on a computer http://forums.adobe.com/thread/1442423?tstart=0 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html
If that doesn't work, you'll need to contact Adobe (this is an open forum, not Adobe support)
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
For anything else, contact your credit card company and have a new card issued if you had any information on your stolen computer... and go to ALL of your online accounts and change your passwords -
How can I uninstall the cc programs I don't use without uninstalling the ones I need and the cs6 versions?
Creative Cloud Help | Install, update, or uninstall apps is the official Adobe link... I do NOT know if you may select individual programs
-
How can I lock the screen on ipod nano 7th gen?
How can I lock the ipod nano 7th gen? Just pressing the top button doesnt cut it as it still starts to play music or pauses or change volume with the slightest knock im in 2 minds to take it back if you cant lock it as ive only had it 4 days and already found this a huge problem!
Hi! I really couldn't find no way to lock the screen, except pressing the top button (what only cancel any touch you do in the screen).
That's an old discussion about (failure vs feature), but I wonder about if you are running, you can let the screen locked and still change or pause the song by pressing the buttons on the side of the iPod)
hope I could help you -
HT201304 How can i lock the General or setting to prevent other people open it?
How can i lock the General or setting to prevent other people open it?
Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
How can we execute the BDC session in error mode through se38 programme
Dear Experts,
How can we execute the BDC session in error mode through se38 programme....
we can execute the session in the below 2 ways
1) Through SM35 we can process the session manually in foreground/Error mode or Background also.
2) through RSBDCSUB (standared Program) we can process the session in back ground.
But i want to process the session in foreground or Error mode..Do we have any standared program for process the session in foreground or error mode.
Please suggest.
Regards,
Bussa.Hi,
SAP was smart enough to provide this little program: RSBDCCTU
Sandra
Edited by: Sandra Rossi, 15 minutes later
Maybe the answer to your question is just to use CALL TRANSACTION ... USING ... (see the example in RSBDCCTU). You can also generate such a program using transaction SHDB -
how can i lock my lost ipad ?
<Edited by Host>These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
Cheers, Tom
Maybe you are looking for
-
How to create and sync to 3 different peoples libraries on the same pc?
-
There is a little thing that always annoys me on mac. That is opening downloads. I use firefox, but the same thing happens on Safari too. That is when I click on a link, say a word document it gives me the option of downloading it, or opening it. Now
-
How do you filter Spam from iPad mail?
I have an iPad 2 with both POP 3 and Exchange accounts. Is there a way to block spam from showing up on my iPad?
-
BB World 8830 I have one envelope for my Shaw e-mails - and am receiving duplicate e-mails for the same one individual message. So if I get a email from xyz company - I seem to be getting that about 10 times over. How do I stop this? Is there a way t
-
ok, I don't really understand the usage of Xnest... it starts fine with "Xnest :1" but I cannot execute anything in that display (DISPLAY=":1" xterm fails... cannot connect to display :1.0) I'd like to use xnest to mess with other window managers w/o