How can i make a form in access into html format?

I am trying to convert my form in access 2013 into into html format. When i try doing so it looks 100% different on the browser than it does in access. I tried doing the export command,
and this is what happened. What can i do to make sure that it looks the exact same and will receive the data from the database? thank you for the help

You can avoid the Ken Burns effect, but it would be a lot of work:
See: http://help.apple.com/imovie/ipad/2.0/index.html#knac3eec39c6
If you don’t want the Ken Burns effect applied to a photo, set the image position and zoom level to be the same for the start and end points.
Adjust the movement of photos with the Ken Burns effect
iMovie applies the Ken Burns effect to the photos you add to your project. With this effect, the camera appears to sweep across and zoom in on the photo. If there are people in the photo, iMovie uses face detection to keep faces within the viewing area.
You can adjust the Ken Burns effect so that the motion starts and ends on the parts of the image you specify.
In the timeline, tap the photo you want to adjust.The Ken Burns effect controls appear in the lower-right corner of the image in the viewer.
To set the way the photo is framed at the beginning, tap the Start button .
Pinch to zoom in or out, then drag the image in the viewer to frame it the way you want.
To set the way the photo is framed at the end, tap the End button .
Pinch to zoom in or out, then drag the image in the viewer to frame it the way you want.
To close the controls, tap the Ken Burns Effect button , or tap outside of the clip.
If you don’t want the Ken Burns effect applied to a photo, set the image position and zoom level to be the same for the start and end points.

Similar Messages

How can I make a form show complex composite data?

How can I make a form show complex composite data?
We would like a form to display the following information:
Employee Names as the columns, 1 row for each calendar day, and each item in the block containing the total sales amount (and other information) for that employee for that day.
This would require the block to function as a (composite) crosstab report.
Here is an example:
We have employees: Jane, John, Jim, and Janice
We would like to see their total sales for the following days: 5/1 .. 5/5
Jane John Jim Janice
5/1 50 8 10 3 30 5 20 7
5/2 40 7 60 8 10 2 30 4
5/3 20 3 50 8 70 9 50 9
5/4 51 8 40 7 40 8 50 8
5/5 10 1 20 2 90 10 10 2
We have a table with records of each day, for each employee, and their sales for that day.
There is a possibility our list of employees can change as well as the number of days.
Anyone tried doing anything like this with a form? We don't want to just embed a report because we would like to include other data as well besides what is mentioned above and we would like them to be able to change some of that data. Thanks in advance for any help.
null

I have a VERY similar problem where I want to have this matrix on the form with six days worth of data (three columns for each day) for my data table. I have done as Momen has suggested and created a view (using SQLPLUS):
create table weekdays (weekday varchar2(3), date_x date);
drop view employee_absences_v;
create view employee_absences_v as
select weekday,
absence_date,
hours,
absence_code_lvid,
adjustment_status_lvid
from employee_absences ea, weekdays wd;
that hopefully provides a row for each day of the week for my data table. The view is created OK but I'm not sure how to get it into the form properly. Also, I am using the form to CREATE rows in the data table not just SELECT and DISPLAY and there may or may not be a row of data for a corresponding day which is going to be a problem for me using this view method, I think. Let me know how this goes and if you get your form to work and how? Momen, your method appeals to me but it's not 100% clear how to get it to work in a form?
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Tina Radosta ():
We tried to create the view (not with Designer because we don't have that). We were not successful in creating a view with a matrix. We would greatly appreciate your help.
Thanks in advance,
Tina<HR></BLOCKQUOTE>
null

How can I make my form be a certified document?

Hi all,
In my form, I want to export xml by using the script "Reference_Syntax.exportData( [ STRING param1 [, BOOLEAN param2 ] ])",
for example, xfa.host.exportData("filename.xml",0).
However, it is invalid.
It says that "This parameter1 is only valid on certified documents where the user has sufficient
permissions".
But how can I make my form be a certified document, or how can I get the sufficient permissions?
Script "xfa.host.exportData("",0)" can be valid, but what I need is specifying the location and file name so that users can export xml just by clicking the button.
Can I achieve this function?
Waiting for your reply, thanks a lot!
Ellie

Please take a look at this discussion. Also, are your end users using Adobe Reader? If so, your document must be Reader Enabled withed LiveCycle RE to use the import / export xml functionality.

How can I make PDF forms filled in Preview show correctly in Acrobat?

Dears list members, there is a known issue with PDF forms filled in Preview: the fields do not show properly in Adobe Acrobat. How can this issue be solved? On the internet, I found two basic solutions: (a) to flatten the document by printing it as a PDF and (b) to use a costum-made script. Is there an official correction for this bug that does not involve installing suspicious scripts? Thanks!

Information only - No one was successful in this discussion.
https://discussions.apple.com/message/21453922#21453922

How can I make a slideshow in iPhoto into a video on an iPad 3?

Been trying to find a way to make a slideshow in iPhoto into a video. Is there a way to do this?

You can avoid the Ken Burns effect, but it would be a lot of work:
See: http://help.apple.com/imovie/ipad/2.0/index.html#knac3eec39c6
If you don’t want the Ken Burns effect applied to a photo, set the image position and zoom level to be the same for the start and end points.
Adjust the movement of photos with the Ken Burns effect
iMovie applies the Ken Burns effect to the photos you add to your project. With this effect, the camera appears to sweep across and zoom in on the photo. If there are people in the photo, iMovie uses face detection to keep faces within the viewing area.
You can adjust the Ken Burns effect so that the motion starts and ends on the parts of the image you specify.
In the timeline, tap the photo you want to adjust.The Ken Burns effect controls appear in the lower-right corner of the image in the viewer.
To set the way the photo is framed at the beginning, tap the Start button .
Pinch to zoom in or out, then drag the image in the viewer to frame it the way you want.
To set the way the photo is framed at the end, tap the End button .
Pinch to zoom in or out, then drag the image in the viewer to frame it the way you want.
To close the controls, tap the Ken Burns Effect button , or tap outside of the clip.
If you don’t want the Ken Burns effect applied to a photo, set the image position and zoom level to be the same for the start and end points.

How can i populate pdf form with access report data

i am trying to make a report electronicly signable. my report is compiled weekly from an access database and i need a way to make it signable. if i can export records from access to an existing pdf would be great. or maybe there is a way to get a signature block put in on the fly? got any ideas?

i am trying to make a report electronicly signable. my report is compiled weekly from an access database and i need a way to make it signable. if i can export records from access to an existing pdf would be great. or maybe there is a way to get a signature block put in on the fly? got any ideas?

How can I make the form fields show all inputted text?

I am trying to create forms to collect customer data. Currently, when I get them back from the customer, if they have typed in more words than the field box allows for, we have to scroll to read it all. When we go to print the form, only the text that fits in the box will print. Help!

Your choices are:
Make the field larger.
Limit the number of characters that can be placed in a field.
Export o Excel.
Add a page with one large field with the same name as the problem field.
Create a dynamic PDF using LiveCycle.

How can I make the form calculate pricing?

How do I enter formulas into the form in order for extended pricing to show up?

Sorry calculations are not supported on the form itself. If you are using the PayPal integration then PayPal will show the total. You can also add formulas to the Response Table for when you are analyzing the data.
Gen

How can I make a form where text flows from one line to another?

I have created a fillable multi page form in Adobe Acrobat Pro XI. The form was originally created in InDesign, using lines for text. I saved as an interactive pdf, opened in Acrobat Pro, and created a form using the "Create Form" function. This worked great, but some parts of the form have multiple lines that need to be filled out, so the customer would continue typing and the type would flow from one line to the next. Right now the lines are individual fields. Can I easily convert these fields so that the text goes from one line to the next as the person filling out the form types?
Thank you for the help.

The easiest way is to do a slight redesign to get rid of the lines and then use a multiline field instead of multiple single line fields. If you really need to have the lines, you can use an approach that's demonstrated in the following sample: https://workspaces.acrobat.com/?d=AG6oZ3bi3DYHokxDPeWN7A
You may come across attempts to use JavaScript to automatically move to the next field when the previous one is filled-up, but I've never seen this work very well.

How can i make my form open a .txt file????

hi every body,
i need some help with that..
i want my form to open a txt file, or at least copy that file from a specific source (windows folder) to a specific destination (another windows folder).
note that this all will work on the server and the client.
i hope to find some help.
thnxxxxxx.
plzzz i need help, it's a GRADUATE PRODUCT issue.
sorry i'm not that strong, it gives me error with host command.
Message was edited by:
bondo2

declare
in_file Text_IO.File_Type;
out_file Text_IO.File_Type;
begin
in_file := Text_IO.Fopen('salary.txt', 'r'); -- open file in read mode
out_file := Text_IO.Fopen('bonus.txt', 'w'); -- open file in write mode
end;
for copy of the file:
host(copy c:\test.txt c:\new_folder\);
Hope this helps !!

How can I make a movable transparent main window (HTML, not FLEX)?

Hi all-
I'm new to AIR and coming up to speed quickly. I got a sample application up and running right away and was able to give it a transparent main window so that the corners are rounded and there is no window title bar.
However, I can't figure out how to make it so the user can drag the application around their desktop when they click on it.
I've seen a few FLEX examples of this but I have to work in HTML.
Does anyone know how to set this up in HTML?
Thanks,
Nicholas

"Works pretty much as I'd expect, except clicking and dragging one of the child controls in my window (e.g. a button) moves the whole window as well."
Most user interface events (mouse up, down, etc.) "bubble" up from child elements to their parents. Since you are listening on the body element, your handler is called for every mouse down in the page since the body is the highest parent in the document.
You can either:
Attach the event listener directly to the element used to drag the window.
Check the event target property to check whether the target of the event (the element moused) is a drag control.

How can I make this possible? Loading another html, into a table?

Hello everyone!
Im using Dreamweaver CS3. I have a website thats all image based - which is not good because google or any search engine cant really pick up any keywords. So I have a table filled with images, Id like to take an image in the center out, and put in some type of code that says "load blah.html into the current row and collumn of this table. I attached an image of what I mean.
Id like to do this because it will be easier for me to update 1 html file and have it load that into the master html file. Is this even possible?
If anyone is interested in checking out the source of the page im working on please feel free to go here:
http://www.ryandeyoung.com/home.html
Thanks in advance for anyones help.

TheFiend1 wrote:
Well, I mean 1 row and 1 column, sorry - but when I go to type something in there it starts typing in the middle - is there a text field I can stick in that empty spot? Where I can write whatever and for it to be as long as I make it, without making the master table change in length?
Here's an example of some scrolling text inside a table cell...
http://dreamweaverresources.com/tutorials/scroller.html
Easy enough to see how it's done, I've provided the code :-)
You can set up the scrolling div in the table cell and then use an include file to populate the text into that div... that way,, you can make changes to the include file and it will be updated automatically on the page.
Here's a quick and easy article on creating server side includes (SSI). Use this to create your 'include file' that goes into that scrolling div.
http://bignosebird.com/ssi.shtml
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap

How can I make a photograph large enough for large format printing?

Is there a way to make an image larger on photoshop or illustrator? I will be printing on a large format latex printer. So the printer itself is excellent but its the image that i am struggling to acquire.
I have basic knowledge of the programmes but if you could explain it to me i could figure it out.....
I am aware of rasterize and vectors, but please could you explain how they work, and if that is my solution.
I want to keep the original photograph as realistic as possible (would prefer not to have it traced on illustrator) and from research it says simply increasing the image size amount of pixels on photoshop does not help...perhaps it does, if you know please help!
This will be a print for an interior wall of an exhibition trailer, and we want to cover all the walls. Plus in future we will be printing for vehicle wraps so I need this knowledge! Help me

Let e try to explain briefly...
"Is there a way to make an image larger on photoshop or illustrator? I will be printing on a large format latex printer. So the printer itself is excellent but its the image that i am struggling to acquire.
- The actual resolution necessary to print grand format depends on the printer. Most of the large-to-grand format inkjets print at 600dpi. Photoshop is the better application for sizig images, while Illustrator is the better application for sizing graphics ( ie., logos ) and type. Use Illustrator to layout both the images and the graphics. You typically would send the print vendor an appropriate PDF file ( that can be scaled ).
I have basic knowledge of the programmes but if you could explain it to me i could figure it out.....
I am aware of rasterize and vectors, but please could you explain how they work, and if that is my solution.
I want to keep the original photograph as realistic as possible (would prefer not to have it traced on illustrator) and from research it says simply increasing the image size amount of pixels on photoshop does not help...perhaps it does, if you know please help!
- You most certainly can use photographs in large format. The problem is you will have to setup the file scaled down. In some cases, the output will have to be assembled in sections. Let's take a section of 10 feet high x 36 feet long. You'd setup your Illustrator file 2.5 feet high x 9 feet long ( 25% ) or 30 inch x 108 inch to be enlarged at the printer 400%. Each time you enlarge an image 2x you cut its resolution in half. So, an image starting at 300ppi will end up at 75ppi. So, your image file would need to be 300ppi at 25%. 75ppi sounds low, right? In actuality, it is enough to print grand format and the image appears smooth. Now the question becomes, how do I get an image large enough in Photoshop? Remember, you'll need a 30" x 108" image plus bleed at 300ppi ( Placed in Illustrator at 100% ). There are applications like Genuine Fractals or Image Doctor's "Blowup" which will enlarge an image file without degradation. I use Genuine Fractals and the results are phenominal.
This will be a print for an interior wall of an exhibition trailer, and we want to cover all the walls. Plus in future we will be printing for vehicle wraps so I need this knowledge! Help me "
- It'll become easier as you do more of this type of work. The amount you end up scaling is up to you. There are limitations as to how big a document can be in Illustrator. I like 25% because it is similar to working on a print ad that is high resolution. Another thing to remember is set your raster effects to High in Illustrator. They will be retained in the PDF which will be enlarged 400% and the ending raster effects will be 75ppi just like the image. Also, feel free to contact the print vendor and ask them questions. You could send them what I've written here and see if they agree. Let me know if you have any further questions.

How can I make a autocad dwg drawing into a rendering in cs4?

I'm taking an autocad file of a product into illustrator/photoshop cs4 workflow to create a rendering quality type graphic....
Is there a good tutorial anywhere, or will anyone be willing to help me through this project??
So far I have imported a dwg into illustrator, and when the cursor is on the gray lines (I made them that way in autocad), a blue line appears, and "path" shows up... those gray lines are a bit larger than what I think I will need... what is going on?
That is where I am at.... I need help from here...

<i don't know what's going on with your file. i get a lot of pdfs from autocad with layers intact. maybe someone else on here knows.>
I am not sure anything IS wrong with my file. my PDF does have all the layers intact. The problem is getting Illustrator to read those PDF layers...
1) Pt to mm font conversion:
Thanks for the font clarification. What exactly is the conversion between pt (which i belive is "points" on the pica system, correct?) and mm?) In Illustrator, if I select a 10pt stroke, it converts it to 3.528 mm. And if I select 3 pt, that's 1.058 mm. However, I went online to some sort of font converter website and it said that 3 pts = 1.0542 mm and 10 pt = 3.5141 mm. So what's the converstion. Btw, here is an interesting website that explains the different font types: http://www.oberonplace.com/dtp/fonts/point.htm
Even if i set the units to mm, i noticed that the items ins the stroke drop down list are still in "pt". How come Illustrator doesn't have the increments in mm?
About selecting everything on one layer - if i click the circle it says "click to target, drag to move appearance." what does that mean, what does the appearance refer to besides opacity? And if i click anywhere to the right of that circle, it says "indicates selected art (click to select art)." I assume that the triangle in the upper right hand corner of the layer just means that layer is current)
2) Pen tool:
Your tip on using the "join" command while using the pen tool is GREAT. thanks. that totally helps me. and it's control + j on a PC. what is the difference between the pen and the pencil tool? y do u recommend pen over pencil?
3) pc3 extension
Can you please tell me more about this? When and where is should the pc3 extension be used? What is difference exactly between Adobe PDF and Adobe PDF.pc3? What are alignments?
any other tips on how to color quickly and efficiently?

How can I make a new album go into a folder in iPhoto without dragging it from the bottom of the list?

This is something that has bugged me all the years I have used iPhoto. When i create a new album, it always goes to the bottom of my very long list of albums. I would like to be able to select the folder that the album goes in as I create it. Im really tired of dragging the new album from the bottom. With a touch pad it is a very tricky manuver.
Thanks for your help.

You can right click in the album area and sort them - as far as I know there is no easy way - suggest to Apple - iPhoto menu ==> provide iPhoto feedback
LN

How can i make a form in access into html format?

Similar Messages

Maybe you are looking for