How can I make a subform conditional upon results of dropdown box?

I have a dropdown box. I also have a subform. If you select "A," I want the subform to appear. If you select "B", I don't want the subform to appear. I am using Adobe Livecycle Designer 8.0. Am I in the right forum?

Hi,
Example script is:
On cange event of drop down
var newtext = xfa.event.newText;
var value = this.boundItem(newtext);
if (value == "A") {
subform.presence = "visible";
else if (value == "B"){
subform.presence = "hidden";
BR,
Paul Butenko

Similar Messages

How can I make what a user types in text entry box go to the lms?

Hi,
I have a couple text entry boxes for non-scored short answer responseses---more of a reflective exercise than anything else.
However, I'd like the text the learner types to be recorded by the LMS.
How do I make that happen if it is not an actual assessment?
thanks

Each TEB gets automatically an associated variable with a generic name that is the same as the TEB (I always recommend choosing a more appropriate name). Lookin the General Accordion, you'll see the Variable field.
Do you want more explanation about variables?
http://blog.lilybiri.com/curious-about-variables-in-captivate-4-5
http://blog.lilybiri.com/unleash-the-power-of-variables-in-captivate-5
Those are old posts, but whereas some system variables have changed names, the principles of the posts are still valid.
Lilybiri

How can I make apps self-minimize upon Launch?

I created an AppleScript to Launch several programs at once. I would like several of the apps to self-minimize to the dock when they launch, leaving just one app with an open window.
Can anyone help me learn how to do this? I am running Mavericks OSX 10.9.1.
Thanks.
Richard Jones

You can always just add them all to your Login Items and check the Hide box.
Otherwise, this may help:
https://discussions.apple.com/thread/5283675

How can I make a picture fit entirely in the photo box in a book. The picture size is small, but the it only shows part of the picture, and the zoom is all the way down.

I am trying to make a Photo Book using IPhoto for my granddaughter's wedding. I am using 6 pictures per page, as I have many pictures to add to book.
The picture size is small. But when I zoom is all the way down to the end to make smaller. Doesn't go far enough. When I try to put a picture in the square spot, it cuts off part of the picture. Has anyone else had this problem, and could help me out. I really would like to put on each page even more pictures, but that is not an option with IPhoto. I have used other sites to make books. This is my first try with IPhoto. I may have to revert to the old familiar ones. Wanted to give this one a try. My granddaughter leaves for Germany on the 21st to join her marine husband. I am quickly running out of time. (The wedding was this past Saturday)

Place it the book, right click on it and fit to frame
LN

How can we make the value of pricing condition flow to the sales invoice?

At an intercompany process, we have the condition type PBXX at the purchase order. On the other hand, at the sales invoice (which is created by VF01) of the sames process, there exists the condition type PR00. The calue of the condition types PBXX and PR00 should be the same. How can we make the value of PBXX flow to the sales invoice? I can create new pricing procedures if needed. I can change the types of the pricing conditions (such as PBXX or PR00) included at the procedures (by customization) if needed. All I need is to have the value of the price at the purchase order the same with the sales invoice at the same process. The transaction codes used at this process are:
ME21N - Create purchase order
VL10D - Create delivery
VF01 - Create invoice
Thanks in advance for the answers...

Yes, i verified that the config item id in the pricing table and the cz_config_items table are the same (once we save the configuration).
The reason we have to do this is coz I have to pass additional parameters, which are item speciific (captured at confiugurator runtime session) while making a call to the pricing engine.
Hence, we are capturing some additional pricing parameters (during a runtime configurator session) in a custom table, and plan to link those to the corresponding items in the 'CZ_Pricing_Structure' table thru the config_item_id.

How can I make a bootable disk for Mountain Lion?

How can I make a bootable disk for Mountain Lion?

Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.

How can I make an invalid dynamic disk Array available to the OS again

Hello Storage Pros
The setup
I have a Promise VTrak E610f head unit with 2 VTrak 610j expansion units attached to it together giving me over 27 TB of usable storage space.
At the hardware level I slip the storage into 6 parts containing 7
1TB disks and had the parts configured into 6 RAID 6 arrays. In the end; each of the 6 arrays gives me 4.6TB of usable storage space.
On the OS level, I have the storage attached to 2 servers: Windows server 2008 and windows server 2008 R2 over a Qlogic fiber channel switch. Each of the 6 arrays are viewable as basic disks of 4,6Tb which I went on to configure as a single RAID 0
spanned volume of 27TB and for that all the disks had to be converted to dynamic.
The problem
Now comes the problem: On my first attempt to do a firmware update on the VTrak E610f storage; all the volumes were rendered foreign and I had to import them to be able to use them. Although the import was successful, I lost all the set NTFS permissions
and SMB share and I had to manually reconfigure them. Upon doing so The OS registered some inconsistencies in the storage and recommended that I ran chkdsk. Since the storage is that big I reluctantly complied and restarted the server.
The first server was restarted BUT chkdsk did not commence as scheduled, the server powered right up. After logging in to inspect; I discovered - to my surprise, that the disks were now shown as invalid in Disk Manager and were no longer visible to
the OS. Assuming that maybe a restart of the other server and the storage would set things right, I went ahead to do so but to no avail. After rebooting the entire system (including the storage), the other server also displayed the disks as invalid and were
no longer visible to the OS as well.
My question is; how can I make the disk available again from this ‘invalid’ state without losing data?
What I tried but did not help:
Taking the disks offline and then online again did not work, after the disks were online again, they still appeared as invalid.
Reactivating the disks threw an error “operation not allowed on an invalid disk pack”
Calling support of the storage manufacturer: they did not find anything wrong with the system, after 5 hours we had to stop.
I fear converting the array from dynamic to basic will destroy all the data.
HxD is showing no errors in the disks
If there is any expert out there with helpful tips; your assistance will be greatly appreciate.
Cheers
John

Hello Shoan
Thanks a lot for your response and tips. Sorry I could not get back to you in good time for I had to run some of the tests you provided, it took some time to
thoroughly re-test the system.
The summary
The initial firmware upgrade attempt forced 3 disks offline and the other 3 became foreign. I had to re-import them to have access again. after re-importing
the disks I realized all NTFS permissions and SMB shares of the folders on the disks had disappeared, but at least the disk was visible and accessible at that point - but not fault free. It was recommened that I let chkdsk run. However rebooting the
system to allow chkdsk to run did not result in chkdsk running, instead chkdsk did not run and after restart, the OS showed the disks as invalid. And that is still the case now.
Response to your questions:
Yes the storage array was (and is still) connected to another server 2008 R2 server when the problem occurred. The second server is also displaying the same problem: the disks are shown as invalid.
The loss of SMB shares and NTFS permissions occurred after the initial firmware upgrade attempt, some disks (3 out of 6 of them) were forcibly offlined and the other 3 were, suddenly, marked as foreign. In the end, and to have access to the disks
I had to online the offlined 3 disks and then reimport the rest of them. From the way I understand it, if the upgrade was not the cause, then at least it was the trigger.
In as far as converting disks from dynamic to basic, I was not in luck so far:
Three of the companies I have contacted (recommended by promise Technology technician) so far only work with smaller disks like 2TB, 27 TB like I have is so
far too big.
I’m not sure converting the disks to basic will help much though, since that would break the single 27 TB volume which the OS was working with into 6 individual
disks of 4.6 TB. Will I be able to get the data back that was written to just one volume from those 6 individual and unrelated disks?
Above all, I have connected the RAID storage system to a newly installed Server 2008 R2, the disks are also shown as invalid.
I have spent more than 17 hours in remote sessions with a Promise Technology technician trying the resolve the issue. From the technician’s side all seems in place with the exception
that the disks are invalid in the OS.
I have contacted Microsoft Customer Support service with the issue. Given that Microsoft did not manufacture the storage unit, can they help at this point – or am I better off
putting my hopes else?
Your help is always appreciated and again, thanks for your response and advice.
JohnV

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck!

How can I make settlement rule mandatory in create work order (IW31)

How can I make settlement rule mandatory in create workorder and saving without release.
I kanow we can make settlement rule mandatory upon Release order but here requirement is
Create work order (IW21) save without releasing that time settlement rule should default.

Hi,
1.If you want the settlement rule default then maintain account assignment data in technical object and when MO is created on that it would be copied into the settlement rule...
2. If you want to make those fields mandatory .... plz check up field selections in config , if you cannot find those then use SHD0 Transaction variant to make those fields mandatory.
3. Enter SHD0 , Enter IW31 in transaction and ZIW31 for transaction variant ..click create option and this takes you to IW31 initial screen , here enter required values of technical object etc and press enter and this gives you IW31 Initial scree screen variant , click continue and this takes you to inside screen and here enter required field values and on pressing enter gives you screen variant .. so you need to enter field values and check the flow of screen variants and on getting settlement rule screen variant select required option for the fields you need.
4. Finally you can save that in package created in SE80 for transporting to other client .., you can activate the variant in SHD0 -->Standard variants -->you can find activate option ..
regrds
pushpa

My Iphone 3gs wont charge, turn on, or restore itself in Itunes, but the apple logo still appears when I hold the sleep botton. How can I make my Iphone work????

My Iphone 3gs wont charge, turn on, or restore itself in Itunes, but the apple logo still appears when I hold the sleep botton. How can I make my Iphone work???? I know it is not dead because I can see the apple logo on, and every time I connect it to a USB port to charge, or a wall charger, the battery appears with a bit of red. Still, it wont turn on. It's been like this for three days now and I haven't stopped charging it. IT just WONT charge? Any tips I can use to solve the issue?
-Esteban

Hello estebie67,
Thanks for the question, and welcome to Apple Support Communities.
It sounds like the iPhone is experiencing issues upon startup, and may not be loading the firmware or operating system correctly. If you have not already done so, try resetting the iPhone while connected to power:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the above does not resolve your issue, it will be best to restore the iPhone in recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

How Can I make the following query faster

Hi Guru
I want your valuable suggestion to make the following query faster.I did not write all required columns list. I gave here all those columns where I have conditon like decode,case when,or subquery
(SELECT CASE WHEN REPORTED_BY IS NULL THEN
          (SELECT INITCAP(EMP_NAME) FROM HR_EMP WHERE EMP_NO = M.EMP_NO_RADIO)
     ELSE (SELECT INITCAP(EMP_NAME) FROM HR_EMP WHERE EMP_NO = M.REPORTED_BY) END RADIOLOGIST_NAME,
     (SELECT TEAM_NAME FROM DC_TECHTEAMMST WHERE TEAM_NO = M.GROUP_NO) GROUP_NAME,
     CASE WHEN M.RESULT_ENTRY_LOCK_BY IS NOT NULL THEN 'R'
WHEN M.REPORT_DONE = 'D' THEN 'D'
WHEN M.REPORT_DONE = 'P' THEN 'P'
WHEN M.REPORT_DONE = 'F' THEN 'F'
     WHEN NVL(M.IMG_CAPTURED,'X') NOT IN ('B','Y') OR M.QA_RESULT = 'F' THEN 'S'
WHEN NVL(M.IMG_CAPTURED,'X') IN ('B','Y') AND NVL(M.QA_RESULT,'X') NOT IN ('B','P') THEN 'Q'
     wHEN NVL(M.IMG_CAPTURED,'X') IN ('B','Y') AND NVL(M.QA_RESULT,'X') IN ('B','P') THEN 'C'
END STATUS,
     (SELECT DECODE(NVL(V.DELIVERY_STATUS,'N'),'E',3,'U',2,1)
          FROM FN_VOUCHERCHD V WHERE V.VOUCHER_NO = M.VOUCHER_NO AND V.ITEM_NO = M.TEST_NO) DELIVERY_STATUS,
     trunc((start_time-order_end)*24,0)||' hr'||':'||
     decode(length(trunc(to_char(MOD((M.start_time-M.order_end)*24,1)*60),0)),2,to_char(trunc(to_char(MOD((M.start_time-M.order_end)*24,1)*60),0))
          ,1,to_char('0'||trunc(to_char(MOD((M.start_time-M.order_end)*24,1)*60),0)))||' mi' duration_order_capture,
     DECODE(R.CONFIDENTIAL_PATIENT,'Y','*',NVL(R.NAME,R.name_lang_name||' '||R.name_lang_fname)) PAT_NAME,
     FNC_PATIENTAGE(R.REG_NO,'',R.CONFIDENTIAL_PATIENT) pat_age,
     DECODE(R.CONFIDENTIAL_PATIENT,'Y','*',R.PATIENT_SEX) PAT_SEX
FROM DC_MODALITYAPPOINTMENT M,DC_TESTMST T,OP_REGISTRATION R
WHERE M.ACCESSION_NO IS NOT NULL AND NVL(M.CANCEL_FLAG,'N') = 'N'
AND (NVL(T.SP_GEN,'S') = 'S' OR NVL(M.DOC_REQ_GEN,'N') = 'Y')
AND M.TEST_NO IS NOT NULL AND M.TEST_NO = T.TEST_NO AND M.REG_NO = R.REG_NO)
How can I make the above query faster.
Query condition or indexing whatever is preferable please guide me.
The approximate data of tables
DC_MODALITYAPPOINTMENT 2,000,000
A lot of updating is going on some columns of this table.all columns are not in the select list, Insertion is happend in batch process by back-end trigger of another table.
Primary key based one column,
OP_REGISTRATION 500,000
Daily insertion on this table around 500 records,updation is not much.
Primary key based one column 'reg_no'
DC_TESTMST
Total records of this table not more than 1500.This is setup table. Insertion and updation is not much on this table also
I have to create a view based on this query .
and I have to create another view to serve another purpose.
In the 2nd view I need this query as well as I need another query by using union all operator based on a table(dc_oldresult)
which have 1,600,000 records.There is no DML on this table
SELECT      NVL((SELECT USER_DEFINE_TEST_NO FROM DC_TESTMST WHERE TEST_NO = SV_ID AND ROWNUM = 1 ),SV_ID) USER_D_EXAM_NO,
(SELECT TEST_TYPE FROM DC_TESTMST WHERE TEST_NO = SV_ID AND ROWNUM = 1 ) EXAM_TYPE,
     NVL((SELECT TEST_NAME FROM DC_TESTMST WHERE TEST_NO = SV_ID AND ROWNUM = 1),'Exam Code: '||sv_id) EXAM_NAME,
     (SELECT PAT_NAME FROM OP_REGISTRATION WHERE REG_NO = HN) PATIENT_NAME,
     (SELECT PAT_AGE FROM OP_REGISTRATION WHERE REG_NO = HN) PATIENT_AGE,
     (SELECT PAT_SEX FROM OP_REGISTRATION WHERE REG_NO = HN) PATIENT_GENDER
FROM DC_OLDRESULT
WHERE HN IS NOT NULL AND SV_ID IS NOT NULL AND UPPER(ACTIVE) = 'TRUE'
Should I make join DC_OLDRESULT, OP_REGISTRATION and DC_TESTMST? or The eixisting subquery is better?
I use OP_REGISTRATION and DC_TESTMST in both query
Thanks in advance
Mokarem

When your query takes too long ...

Hi my macbook pro is very slow ,anyone can suggest me how can I make is fast?

Hi my macbook pro is very slow ,anyone can suggest me how can I make is fast?

Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.

How can I make a chart ignore cells until their value is changed from 0?

In the corresponding table, I used conditional formatting to hide zeros in the highlighted row by conditionally changing the text color to that of the table background. However, the zero value's are still represented in the corresponding chart as you can see in the attached photo . How can I make the chart ignore certain cells only until their values are changed from zero? Thanks in advance!
Ryan

Hi Ryan,
Leave the cells empty until they're needed, or, if the cells' contents are determined by a formula, revise the formula to insert a null string if the value is zero.
=IF(your formula = 0, "", your formula)
Regards,
Barry

How can I make sure that in RAM our sql server is not facing any mermory crunch issue?

The SQL server process always show RAM is highly used while its a default behaviour of sql server.
How can I make sure that in RAM our sql server is not facing any mermory crunch issue?
Thanks

The SQL server process always show RAM is highly used while its a default behaviour of sql server.
How can I make sure that in RAM our sql server is not facing any mermory crunch issue?
Thanks
The best way to make sure you are not facing memory pressure is to use perfmon counters and monitor various memory counters
For SQL Server 2005 - 2008 r2 use below counters
SQLServer:Buffer Manager--Buffer Cache hit ratio(BCHR): IIf your BCHR is high 90 to 100 Then it points to fact that You don't have memory pressure. Keep in mind that suppose somebody runs a query which request large amount of pages in that
case momentarily BCHR might come down to 60 or 70 may be less but that does not means it is a memory pressure it means your query requires large memory and will take it. After that query completes you will see BCHR risiing again
SQLServer:Buffer Manager--Page Life Expectancy(PLE): PLE shows for how long page remain in buffer pool. The longer it stays the better it is. Its common misconception to take 300 as a baseline for PLE. But it is not,I read it from
Jonathan Kehayias book( troubleshooting SQL Server) that this value was baseline when SQL Server was of 2000 version and max RAM one could see was from 4-6 G. Now with 200G or RAM coming into picture this value is not correct. He also gave the formula( tentative)
how to calculate it. Take the base counter value of 300 presented by most resources, and then determine a multiple of this value based on the configured buffer cache size, which is the 'max server memory' sp_ configure option in SQL Server, divided by 4 GB.
So, for a server with 32 GB allocated to the buffer pool, the PLE value should be at least (32/4)*300 = 2400. So far this has done good to me so I would recommend you to use it.
SQLServer:Buffer Manager--CheckpointPages/sec: Checkpoint pages /sec counter is important to know about memory pressure because if buffer cache is low then lots of new pages needs to be brought into and flushed out from buffer pool,
due to load checkpoint's work will increase and will start flushing out dirty pages very frequently. If this counter is high then your SQL Server buffer pool is not able to cope up with requests coming and we need to increase it by increasing buffer pool memory
or by increasing physical RAM and then making adequate changes in Buffer pool size. Technically this value should be low if you are looking at line graph in perfmon this value should always touch base for stable system.
SQLServer:Buffer Manager--Freepages: This value should not be less you always want to see high value for it.
SQLServer:Memory Manager--Memory Grants Pending: If you see
memory grants pending in buffer pool your server is facing SQL Server memory crunch and increasing memory would be a good idea. For memory grants please read this article:
SQLServer:memory Manager--Target Server Memory: This is amount of memory SQL Server is trying to acquire.
SQLServer:memory Manager--Total Server memory This is current memory SQL Server has acquired.
8. Free List Stalls/sec – Number of requests per second that had to wait for a free page
9. Free Pages – Total number of pages on all free lists (free lists track all of the pages in the buffer pool that are not currently allocate to a data page, and are therefore available for usage immediately)
NOTE: If you have NUMA system don't use PLE to monitor memory condition it wont give correct value
From 2012 Onwards
Memory management has become easy from 2012 onwards as
Max server memory also allocated memory for requests which require memory >8KB
SQLServer:Memory Manager:Free Memory (KB)
SQLServer:Memory Manager:Target Server Memory (KB)
SQLServer:Memory Manager:Total Server Memory (KB)
For NUMA system its also wort monitoring each node.
Object - SQLServer:Memory Node:Total Node Memory
(KB)
Object - SQLServer:Memory Node:Target Node Memory
(KB)
Object - SQLServer:Memory Node:Free Node Memory
(KB)
Ideally if target server memory is less than or equal to total server memory there wont be memory pressure if target is > total it does not always means its memory pressure
BCHR would also give you good idea about memory pressure
If memory grants pending is frequently non zero there is memory pressure
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

How can i make my object appear as a mesh?

How can I make an object appear as a mesh? I dont want anything as complicated as a coloured gradient I just want a flat object to appear like a net. Is there an easy way to do this?
Thanks
J

Jules,
Depending on the shape, and upon the appearance (varying width and/or knotting or whatever), it may be anything from a Rectangular/Polar Grid (bundled with the Line Segment Tool) to something intricate and difficult.

How can I make a subform conditional upon results of dropdown box?

Similar Messages

Maybe you are looking for