How can I make one cell search multiple other cells for a string of text and return whether or not the string appeared in the cells searched?

https://www.icloud.com/iw/#numbers/BAI31boMQXsGKc8NH22BlqWRzbs8PdgWBs-F/2014-15_ Curriculum_Planning_w_CCSS_(Web_Shared)
My document is above, if anyone wants to help this crazy teacher invent a better lesson planner.
Here's my predicament.  The state in which I teach requires teachers to keep up with which of the Common Core State Standards (CCSS) their instruction is addressing and when the standards were addressed.  I got the bright idea to do this through a spreadsheet in Numbers because our school is getting iPads this year, so it'd be pretty sweet to be able to assemble all of my lesson plans in one massive spreadsheet.  On the "AP Lesson Plans" sheet, I've got a few weeks worth of lesson plans entered in.  I'm planning on going in and using the drop-down menu next to each lesson plan to add all the CCSS on a per-day basis.  This is simple enough, but here's where I run into a problem.
I want the "AP Standards" sheet to concatenate, in cells D3 through G76, the dates on which a standard was covered.  What I need is some way for, say, Cell D3 to look at the table on the "AP Lesson Plans" sheet and concatenate the dates of every lesson which has the standard in column A (In this instance, RL.11-12.1).  At the end of the day, the functionality I need is that I can enter my lessons and CCSS on the "AP Lesson Plans" sheet and go to the other sheet and see a summary of which standards have been addressed, when, and how often.
If that's as clear as mud, well, I teach literature, not technical writing, so my apologies.  I'm more at home with Jonathan Swift than spreadsheets.  I'll gladly help you help me if you'd let me know what you need to know.  Oh, and to illustrate my knowledge level (just enough to be dangerous), I've left you the formula of my best stab at making cell D3 behave as desired.  It's the gray box on the "AP Standards" sheet.  Yikes.

Hi Arrdenet,
Congratulations on the nested IFs. I haven't tested that formula, but it is impressive. It will be very difficult to debug if it doesn't work, and I think it would make Numbers very slow.
Here is a different approach. After you enter all the CCSS, add another column with HLOOKUP.
Edit:
B2 (and Fill Down)
A2 (and Fill Down)
=IFERROR(HLOOKUP(A$1,C2:E2,1,0),"")
HLOOKUP looks for the value in A1 in all the CCSS columns.
IFERROR is to stop the error triangles appearing and returns "" (NULL) instead.
Then sort by column A.
Not a complete answer, but it might get you started.
Regards,
Ian.

Similar Messages

  • How can I Make one column into Multiple columns

    Id
    SCM-01-015
    SCM-01-020
    SFA-02-021
    SFC-02-042
    STB-03-035
    STP-04-167
    SVF-06-150
    I want the output like this
    Id 01 02 03 04 06
    SCM-01-015 5
    SCM-01-020 10
    SFA-02-021 15
    SFC-02-042 15
    STB-03-035 20
    STP-04-167 50
    SVF-06-150 5
    thank you in advance

    Hi,
    801668 wrote:
    Id
    SCM-01-015
    SCM-01-020
    SFA-02-021
    SFC-02-042
    STB-03-035
    STP-04-167
    SVF-06-150
    I want the output like this
    Id 01 02 03 04 06
    SCM-01-015 5
    SCM-01-020 10
    SFA-02-021 15
    SFC-02-042 15
    STB-03-035 20
    STP-04-167 50
    SVF-06-150 5
    thank you in advanceWhenever you post formatted text (such as query output) on this site, type these 6 characters:
    \(small letters only, inside curly brackets) before and after formatted text, to preserve spacing.
    Do you want output something like this, which is from the scott.emp table?ENAME ANALYST CLERK MANAGER PRESIDENT SALESMAN
    ALLEN 1600
    JONES 2975
    FORD 3000
    CLARK 2450
    MILLER 1300
    SMITH 800
    WARD 1250
    MARTIN 1250
    SCOTT 3000
    TURNER 1500
    ADAMS 1100
    BLAKE 2850
    KING 5000
    JAMES 950
    (ALLEN is a SALESMAN, JONES is a MANAGER, ..., JAMES is a CLERK.)
    If so, do a pivot, somehting like this:SELECT     ename
    ,     MIN (CASE WHEN job = 'ANALYST' THEN sal END)     AS analyst
    ,     MIN (CASE WHEN job = 'CLERK' THEN sal END)     AS clerk
    ,     MIN (CASE WHEN job = 'MANAGER' THEN sal END)     AS manager
    ,     MIN (CASE WHEN job = 'PRESIDENT' THEN sal END)     AS president
    ,     MIN (CASE WHEN job = 'SALESMAN' THEN sal END)     AS salesman
    FROM     scott.emp
    GROUP BY ename
    Always say which version of Oracle you're using.
    The query above will work in Oracle 8.1 or higher, but starting in Oracle 11 there's a better way:  SELECT ... PIVOT.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • How can you make one button preform different actions in Xcode?

    How can you make one button "preform a click" and "orderfront"? Is that possible? Because what I am doing is making a welcome window to my application for Mac OS X 10.6, and I have two buttons in that window, one says "Connect" which connects a a WebView to a url and the other button opens up the main window. So how can I a make a button do multiple things at once??

    Ah - If you are just using bindings between various objects from Interface Builder, you can reduce your application code a bit (sometimes quite a bit), but there is only so far you can go. Typically variables and routines are defined in your application that Interface Builder hooks into, so that your application code (usually Objective-C, but can be others) can use these variables and routines to determine what is happening in the user interface.
    I'm not sure how up-to-date the project code is (or what programming code you are familiar with), but you can take a look at Apple's Cocoa Application Tutorial to see what is (usually) involved in creating an application.

  • Mountain Lion Recovery DVD - How can I make one, ML was installed on my iMac and BBP

    Mountain Lion Recovery DVD - How can I make one, ML was installed on my iMac and MBP when I purchased them. When I look at the App Store, it dose not show ML as purchased (to download again) - do I have to purchase it again to make a Recovery DVD?
    Thanks for your help.
    Regards
    NGI

    do i have to purchase it again to make a Recovery DVD?
    No. You can still make a bootable recovery DVD, but you will not be able to make a full bootable copy of ML without purchase.
    1) Enable the debug menu for Disk Utility via Terminal Application. Navigate to terminal by typing "terminal" in   spotlight. Copy the bolded text below and enter it into the command prompt:
    defaults write com.apple.DiskUtility DUDebugMenuEnabled -bool true ; open -a "Disk Utility" ; exit
    2) From the Debug Menu > Select Show every Partition > Recovery HD should appear
    3) Right click (control + click) the Recovery HD partition and select "Mount"
    4) Right click again the partition again > "Reveal Recovery HD in Finder". Leave this window open
    5) At this point, you will need open terminal again and enter the following command:
    sudo chflags nohidden /Volumes/Recovery\ HD/com.apple.recovery.boot/BaseSystem.dmg ; exit
         Type your password when prompted.
    6) Navigate back to the Recovery HD finder Window > com.apple.recovery.boot > BaseSystem.dmg
    7) Drag "BaseSystem.dmg" into Disk Utility's sidebar.
    8) Insert your DVD
    9) Select "BaseSystem.dmg" in the sidebar and hit "Burn"
    Once the burn is completed, hold option down at startup and select the DVD to boot. This is a bootable Recovery partition, not a bootable copy of ML.
    Note: to disable the debug menu,
    defaults write com.apple.DiskUtility DUDebugMenuEnabled -bool false

  • How can I separate one column into multiple column?

    How can I separate one column into multiple column?
    This is what I have:
    BUYER_ID ATTRIBUTE_NAME ATTRIBUTE_VALUE
    0001 PHONE_NUMBER 555-555-0001
    0001 EMAIL [email protected]
    0001 CURRENCY USD
    0002 PHONE_NUMBER 555-555-0002
    0002 EMAIL [email protected]
    0002 CURRENCY USD
    0003 PHONE_NUMBER 555-555-0003
    0003 EMAIL [email protected]
    0003 CURRENCY CAD
    This is what I would like to have:
    BUYER_ID PHONE_NUMBER EMAIL CURRENCY
    0001 555-555-0001 [email protected] USD
    0002 555-555-0002 [email protected] USD
    0003 555-555-0003 [email protected] CAD
    Any help would be greatly appreciated.

    This is another solution. Suppose your actual table's name is test(which has the redundant data). create a table like this:
    CREATE TABLE test2 (BUYER_ID number(10),PHONE_NUMBER varchar2(50),EMAIL varchar2(50),CURRENCY varchar2(50));
    then you will type this procedure:
    declare
    phone_number_v varchar2(50);
    EMAIL_v varchar2(50);
    CURRENCY_v varchar2(50);
    cursor my_test is select * from test;
    begin
    for my_test_curs in my_test loop
    select ATTRIBUTE_VALUE INTO phone_number_v from test
    where person_id=my_test_curs.person_id
    and attribute_name ='PHONE_NUMBER';
    select ATTRIBUTE_VALUE INTO EMAIL_v from test
    where person_id=my_test_curs.person_id
    and attribute_name ='EMAIL';
    select ATTRIBUTE_VALUE INTO CURRENCY_v from test
    where person_id=my_test_curs.person_id
    and attribute_name ='CURRENCY';
    INSERT INTO test2
    VALUES (my_test_curs.person_id,phone_number_v,EMAIL_v,CURRENCY_v);
    END LOOP;
    END;
    Then you will create your final table like this:
    create table final_table as select * from test2 where 1=2;
    After that write this code:
    INSERT ALL
    into final_table
    SELECT DISTINCT(BUYER_ID),PHONE_NUMBER,EMAIL,CURRENCY
    FROM TEST2;
    If you have a huge amount of data in your original table this solution may take a long time to do what you need.

  • How can I make one list of all events I have in over 30 libraries I made

    How can I make one list of all events I have in over 30 libraries I made?

    The only way I know of is to take a screenshot of the Photo mode with the View ➙ Show Event Titles selected.  That will give you a list of sorts.  Might take more than one screenshot per library.
                   Click to view full sized
    OT

  • How can we make one object as synchronizable?

    Hi!
    I am new to java.How can we make one object as synchronizable?
    Thanx

    Synchronize is used to make an object and/or a functional sequence thread safe. By itself it does not make something thread safe.
    So the point is to make something thread safe not just to synchronize it.
    You can either sychronize a method like so....
          public synchronized void doit()
    Or you synchronize on an object (where 'Object' below is solely as an example, any object can be used)...
          Object lockObject = new Object();
          public void doit()
             sychronized (lockObject)

  • How can I make it so that my songs don't go on her iPod and her songs ....

    Me and my mother just got iPods for christmas and hers was a U2 ipod and mine was a 30gb ipod. I have downloaded some songs and have imported some cds but my mother doesn't want those songs on her ipod. How can I make it so that my songs don't go on her iPod and her songs don't go on mine.Do i need to create another itunes?

    The computer can tell the difference between your two iPods. When you first plugged each one in, you named them and the computer recognizes each one as a separate disk.
    Now, when you plug in your iPod, and you are looking in iTunes at your iPod contents, you will see four buttons in the bottom right corner of iTunes - the first one is to display iPod options. Click on this, and under the music tab, select "Automatically update selected playlists only". Then, you scroll through your playlists and select only those you want to be transferred to your iPod. Your mother can do the same thing. Now you can each make your own playlists from the same music library, and only those songs you want to go onto your iPod will transfer when you plug it in. You can make the same selections for all the other options too (video, podcats. photos, etc), so that you only have to have what you want on each iPod.
    I have two iPods, a new 5g video iPod and an ancient 1g iPod, and have no problems syncing each of them with different playlists and options.

  • I've got a G5, OS 10.5, and an IBook OS 10.4.  Both can reach the internet wirelesly.  How can I make them aware of each other, so they can exchange files

    I've got a G5, OS 10.5, and an IBook OS 10.4.  Both can reach the internet wirelesly. 
    How can I make them aware of each other, so they can exchange files?  Both have network
    icons in the systems peferences, but I can't see how to hook them up.

    That got me closer, but I'm not quite there yet.  On each ofthe two computers I've allowed all users File Sharing and Remote Management.  Each computer has an address 192.168.1.2 (or 4).  When I enter those addresses into "connect to server" the reponse is either 'drop box' or 'public folder'.  So it seems that only very basic sharing is allowed. I have'nt  set up a public folder on either one.

  • How can i make buttons in an article to go for other articles in Folios Builders for Ipad?

    I am trying to make buttons in an index, for goingo to other articles, but they never worked here. When a i put Go to Destination, and choose de Indd file, it does not work.
    Can i make a scrollable frame a button either? When i tryed, it did not work, not even the button, and the scrollable frame.
    Please, need some help here.

    WHat is navto? is navegate to...?   How can i do this?
    thanks a lot for your attenttiosn.
    Em 29 jan 2014 às 06:26, Bob Levine <[email protected]> escreveu:
    Re: How can i make buttons in an article to go for other articles in Folios Builders for Ipad?
    created by Bob Levine in Digital Publishing Suite - View the full discussion
    Go to destination is unsupported in DPS. You should be using go to url with a navto: command.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6064623#6064623
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6064623#6064623
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6064623#6064623. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Digital Publishing Suite at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • My router is set up and in use, but with no pass word. How can I make my router pass word protected?, My router is set up and in use, but with no pass word. How can I make my router pass word protected?

    My router is set up and in use, but with no pass word. How can I make my router pass word protected?, My router is set up and in use, but with no pass word. How can I make my router pass word protected?

    What brand and model router are you talking about?

  • How can I make one slide that contains multiple slides?

    Hi, I want to make slideshow for presentation. And I want to know how can I make this slide.
    For example in this picture, have 1 main slide and 6 sub slides. I want to make slide like this, and all slides should be in one slide. And I want to zoom in to sub slide when I click and then zoom out when I click one more. And then second slide should be zoom in when I click and zoom out when I click again. And then slide 3 etc.
    I want to know how can I do this.

    There are two ways to do this.
    1. Duplicate the main or first slide numerous times - as many as you'll need for the show, which looks like 6 including the first "overview slide".
    2. You know have two choices - either use the Magic Move transition between the first slide and the next, which has the main box centre screen and enlarged proportionally.
    3. Or enlarge the slides so that the main point is central, but use hyperlinks to move between the slides. This also gives you the liberty of changing the order spontaneously should the situation demand. Using the main first slide, place an invisible box around each element and use a link to move to that slide which is enlarged. Then you have to decide if you will come back each time to slide 1 (the overview) by having the whole slide hyperlinked to slide 1, or the whole slide linked to the next slide. That way you don't have to go looking for the hyperlink area.
    The Magic Move effect will give your presentation a "Prezi" like effect, while the hyperlinked version I've described will just use gentle dissolves between each slide.
    I will sometimes use 3 because I want to encourage audience participation and let them choose where to go next... e.g., the various elements of a 747 wing assembly, or the interior of a large cruise ship, showing state rooms, dining, pool area, ballroom, etc.
    Les

  • How can I remove one company detail from SAP prodcut for customer

    I have done one SAP product.I have created two comp SBB1,SBB2.According to this company I developed SAP product.now customer needs only one company.How can I remove one company detail for this purticular customer.kindly guide on this.

    Hi,
    If you are saying- you created 2 company codes in your implementation and now, the client says - only one company code should be active - then all you need to do is: make the second comp code non-productive.
    You can do it using the foll menu path:
    SPRO>Financial Accounting>Financial Accounting Global Settings>Company Code>Set Company Code to Productive
    Under this node, you mark only one of the two comp codes as productive.
    Does this answer you?
    Pls confirm,
    Siva

  • How can I make my mac mini run faster? Everytime i try to download a internet page I get the circle with colors. It takes too long. Help

    How can I make my mac mini run faster. Loading internet pages is too slow

    i have the same problem...it can take 10-15 seconds to just switch tabs..i think i will solve it by taking mine back

  • How can i make a back up on my desktop ? i have pc windows and itunes 11.0.4

    how can i make a back up full on my pc ? i have iphone4 version 6.0.1 with itunes 11.0.4 ? 

    Hi.
    Messages are included with the iPhone's backup which is updated by iTunes as the first step during the iTunes sync process.
    Are you wanting access to your messages on your computer?
    If so, there are 3rd party utilities that provide for extracting messages and other data from your iPhone's backup on your computer's hard drive, or transferring messages from your iPhone for access on your computer.

Maybe you are looking for