How can I make the X axis temporally proportional?
I have a very simple line chart with decimal values on the Y axis and dates on the X axis. The dates are one per row in my source spreadsheet but they are not "evenly spaced". How can I make the chart reflect linear time, plotting the date categories irregulary along a smooth timeline?
Look forward to the real experts' comments on chart overlays.
As for date-format for X-axis it took some fiddling for me (sometimes it was greyed out) but it does work.
Either leave it as Same as Source Data or pick Date and Time and choose one of the many formats available, some shorter than the source data format.
I haven't figured out how to make specific dates show up on the axis, e.g. in my example it would be nicer to show mid-month and/or month-end dates. Numbers seems to split into intervals based on the number of Steps, with little (no?) control over where intervals begin/end.
Similar Messages
-
How can I make the x axis real time?
I would like to know how to make the X axis of a chart/Graph into realtime so that I can go in increments of seconds or milliseconds. How can I do this? I am getting some really funny stuff on my graphs and I notice the manual says that the "Time" label is just a default label. So I would like to know how to get the "real" time on my axis. Do you have any good ecamples?
Thanks,
BrianZvezdana,
I don't have LV 7, (I have 6.1) so that executable didn't come in. Also with what you mentioned won't I just get the time and date in seconds? what I want to get is the data ploted for the amount of time that the VI is running or that my Kodak Imaging board has been programmed to cycle within. I am going to attach some of the stuff I have been getting, I don't know if it is REAL TIME ,which I want, or if it is not.
Attachments:
Question_for_engineers.doc 20 KB
Test_for_technicians.zip 347 KB
Front_Panel1d.jpg 83 KB -
I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up
- Have you tried a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try syncing the iPod to your computer. Then delete from iTunes and sync. that should delete it from the iPod. Then redownload it. -
Macbook Pro with OSX Yosemite: I am frustrated that when using Word for Mac, the cursor keeps jumping around all over the page. How can I make the pointer follow the cursor so this stops?
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
How can I make the combo box turn to the value of black.
When the show button is pressed (and not before), a filled black square should be
displayed in the display area. The combo box (or drop down list) that enables the user to choose the colour of
the displayed shape and the altering should take effect immediately.When the show button is pressed,
the image should immediately revert to the black square, the combo box should show the value that
correspond to the black.
Now ,the problem is: after I pressed show button, the image is reverted to the black square,but I don't know
how can I make the combo box turn to the value of black.
Any help or hint?Thanks a lot!
coding 1.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class test extends JFrame {
private JPanel buttonPanel;
private DrawPanel myPanel;
private JButton showButton;
private JComboBox colorComboBox;
private boolean isShow;
private int shape;
private boolean isFill=true;
private String colorNames[] = {"black", "blue", "cyan", "darkGray", "gray",
"green", "lightgray", "magenta", "orange",
"pink", "red", "white", "yellow"}; // color names list in ComboBox
private Color colors[] = {Color.black, Color.blue, Color.cyan, Color.darkGray,
Color.gray, Color.green, Color.lightGray, Color.magenta,
Color.orange, Color.pink, Color.red, Color.white, Color.yellow};
public test() {
super("Draw Shapes");
// creat custom drawing panel
myPanel = new DrawPanel(); // instantiate a DrawPanel object
myPanel.setBackground(Color.white);
// set up showButton
// register an event handler for showButton's ActionEvent
showButton = new JButton ("show");
showButton.addActionListener(
// anonymous inner class to handle showButton events
new ActionListener() {
// draw a black filled square shape after clicking showButton
public void actionPerformed (ActionEvent event) {
// call DrawPanel method setShowStatus and pass an parameter
// to decide if show the shape
myPanel.setShowStatus(true);
isShow = myPanel.getShowStatus();
shape = DrawPanel.SQUARE;
// call DrawPanel method setShape to indicate shape to draw
myPanel.setShape(shape);
// call DrawPanel method setFill to indicate to draw a filled shape
myPanel.setFill(true);
// call DrawPanel method draw
myPanel.draw();
myPanel.setFill(true);
myPanel.setForeground(Color.black);
}// end anonymous inner class
);// end call to addActionListener
// set up colorComboBox
// register event handlers for colorComboBox's ItemEvent
colorComboBox = new JComboBox(colorNames);
colorComboBox.setMaximumRowCount(5);
colorComboBox.addItemListener(
// anonymous inner class to handle colorComboBox events
new ItemListener() {
// select shape's color
public void itemStateChanged(ItemEvent event) {
if(event.getStateChange() == ItemEvent.SELECTED)
// call DrawPanel method setForeground
// and pass an element value of colors array
myPanel.setForeground(colors[colorComboBox.getSelectedIndex()]);
myPanel.draw();
}// end anonymous inner class
); // end call to addItemListener
// set up panel containing buttons
buttonPanel = new JPanel();
buttonPanel.setLayout(new GridLayout(4, 1, 0, 50));
buttonPanel.add(showButton);
buttonPanel.add(colorComboBox);
JPanel radioButtonPanel = new JPanel();
radioButtonPanel.setLayout(new GridLayout(2, 1, 0, 20));
Container container = getContentPane();
container.setLayout(new BorderLayout(10,10));
container.add(myPanel, BorderLayout.CENTER);
container.add(buttonPanel, BorderLayout.EAST);
setSize(500, 400);
setVisible(true);
public static void main(String args[]) {
test application = new test();
application.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
coding 2
import java.awt.*;
import javax.swing.*;
public class DrawPanel extends JPanel {
public final static int CIRCLE = 1, SQUARE = 2;
private int shape;
private boolean fill;
private boolean showStatus;
private int shapeSize = 100;
private Color foreground;
// draw a specified shape
public void paintComponent (Graphics g){
super.paintComponent(g);
// find center
int x=(getSize().width-shapeSize)/2;
int y=(getSize().height-shapeSize)/2;
if (shape == CIRCLE) {
if (fill == true){
g.setColor(foreground);
g.fillOval(x, y, shapeSize, shapeSize);
else{
g.setColor(foreground);
g.drawOval(x, y, shapeSize, shapeSize);
else if (shape == SQUARE){
if (fill == true){
g.setColor(foreground);
g.fillRect(x, y, shapeSize, shapeSize);
else{
g.setColor(foreground);
g.drawRect(x, y, shapeSize, shapeSize);
// set showStatus value
public void setShowStatus (boolean s) {
showStatus = s;
// return showstatus value
public boolean getShowStatus () {
return showStatus;
// set fill value
public void setFill(boolean isFill) {
fill = isFill;
// set shape value
public void setShape(int shapeToDraw) {
shape = shapeToDraw;
// set shapeSize value
public void setShapeSize(int newShapeSize) {
shapeSize = newShapeSize;
// set foreground value
public void setForeground(Color newColor) {
foreground = newColor;
// repaint DrawPanel
public void draw (){
if(showStatus == true)
repaint();Hello,
does setSelectedIndex(int anIndex)
do what you need?
See Java Doc for JComboBox. -
How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?
When talking about a specific image posting the image may be useful.
One can use a Layer Mask and add a white Layer underneath. -
I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanent? I have an older machine with Windows XP.
I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
Try this:
Prepare iTunes so that it can see the external drive.
Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
Close and shut down the computer.
The next time you turn the computer on again, connect the external drive
Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
What happens, which step do you have problems with?
Message was edited by: the fiend -
How can I make the text bigger in iCal?
How can I make the text bigger in iCal? I've looked at Preferences and View.
Sorry, did not see that you are using 10.6.7
-
I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?
I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck! -
How can I make the execution of my script faster
Hi everyone
How can I make the execution of my script faster, because it takes a lot of time to execute? The following is my script:
DECLARE
CURSOR C1 IS
SELECT A.ITEM_CODE,A.STORE_CODE,ST_UNIT,SA_UNIT,CART_QTY,QUANTITY_ON_HAND
FROM PROJ.IM_LOCATION A
WHERE A.ITEM_CODE BETWEEN :ITEM_FRM AND :ITEM_TO
AND A.STORE_CODE = :FRM_STORE
ORDER BY
A.STORE_CODE ;
CURSOR C2 IS
SELECT A.ITEM_CODE,A.STORE_CODE,ST_UNIT,SA_UNIT,CART_QTY,QUANTITY_ON_HAND
FROM PROJ.IM_LOCATION A
WHERE A.ITEM_CODE BETWEEN :ITEM_FRM AND :ITEM_TO
AND A.STORE_CODE = :FRM_STORE
ORDER BY
A.STORE_CODE ;
big_syb_qty_issue number(12,3);
small_syb_qty_issue number(12,3);
big_issue number(12,3);
small_issue number(12,3);
item_syb_code varchar2(30);
big_syb_qty_rec number(12,3);
small_syb_qty_rec number(12,3);
BI_SUPP_REC number(12,3);
SM_SUPP_REC number(12,3);
big_syb_qty_ADJ number(12,3);
small_syb_qty_ADJ number(12,3);
big_ADJ number(12,3);
small_ADJ number(12,3);
big_syb_qty_rec_iner number(12,3);
small_syb_qty_rec_iner number(12,3);
BI_INTER number(12,3);
SM_INTER number(12,3);
cl_big_qty number(12,3);
cl_small_qty number(12,3);
cl_big_qty1 number(12,3);
cl_small_qty1 number(12,3);
BIG_QTY_OPEN number(12,3);
SMALL_QTY_OPEN number(12,3);
BEGIN
IF ((:FRM_STORE IS NULL) OR (:ITEM_FRM IS NULL) OR (:ITEM_TO IS NULL) OR (:DATE_FRM IS NULL)) THEN
SHOW_MESSAGE('You Should Enter the Parameters Values Correctly Please try again !!!! ');
RAISE FORM_TRIGGER_FAILURE;
GO_FIELD('DATE_FRM');
END IF;
DELETE FROM STOCK_AT_DATE_REP2;
COMMIT;
cl_big_qty := 0;
cl_small_qty := 0;
-- MESSAGE('Please Wait The System Calculating The Transactions !!!');
SET_APPLICATION_PROPERTY(CURSOR_STYLE,'BUSY');
FOR R IN C1
LOOP
cl_big_qty := R.CART_QTY ;
cl_small_qty := R.QUANTITY_ON_HAND;
-- Transerfer Data 1
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(CART_QTY,0)) ,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_syb_qty_issue,small_syb_qty_issue
FROM IM_TRANS_ISSUE_HEADER A,IM_TRANS_ISSUE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.DEL_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('ISSUED BIG'||' '||big_syb_qty_issue);
exception
when no_data_found then big_syb_qty_issue := 0;
small_syb_qty_issue := 0;
when others then MESSAGE(10,sqlerrm);
END ;
-- Goods Received Data From Supplier 1
BEGIN
SELECT B.ITEM_CODE,SUM(B.CART_QTY),SUM(ITEM_QUANTITY)
INTO item_syb_code,big_syb_qty_rec,small_syb_qty_rec
FROM IM_GOODS_RECIEVE_HEADER A,IM_GOODS_RECIEVE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('RECEIVED FROM SUPPLIER BIG'||' '||big_syb_qty_rec);
exception
when no_data_found then big_syb_qty_rec := 0;
small_syb_qty_rec := 0;
when others then message(10,sqlerrm);
END ;
-- Adjustement Data 1
BEGIN
SELECT B.ITEM_CODE ,SUM(NVL(CART_QTY,0)) ADJUST_QTY,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_syb_qty_ADJ,small_syb_qty_ADJ
FROM IM_ADJUST_HEADER A,IM_ADJUST_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND A.DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('Adjust BIG'||' '||big_syb_qty_ADJ);
exception
when no_data_found then big_syb_qty_ADJ := 0;
small_syb_qty_ADJ := 0;
when others then message(10,sqlerrm);
END ;
-- Goods Received Data From Stores 1
BEGIN
SELECT B.ITEM_CODE,SUM(B.CART_QTY),SUM(ITEM_QUANTITY)
INTO item_syb_code,big_syb_qty_rec_iner,small_syb_qty_rec_iner
FROM IM_TRANS_REC_HEADER A,IM_TRANS_REC_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND REC_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE > :DATE_TO
GROUP BY
B.ITEM_CODE;
-- show_message('here');
-- SHOW_MESSAGE('Received From Stores BIG'||' '||big_syb_qty_rec_iner);
exception
when no_data_found then
big_syb_qty_rec_iner := 0;
small_syb_qty_rec_iner := 0;
when others then message(10,sqlerrm);
END ;
cl_big_qty := (NVL(cl_big_qty,0) + NVL(big_syb_qty_issue,0));
cl_big_qty := (NVL(cl_big_qty,0) - NVL(big_syb_qty_rec,0));
cl_big_qty := (NVL(cl_big_qty,0) - NVL(big_syb_qty_rec_iner,0));
big_syb_qty_ADJ := -1 * NVL(big_syb_qty_ADJ,0);
cl_big_qty := (NVL(cl_big_qty,0) + NVL(big_syb_qty_ADJ,0));
-- srw.message(2000,'cl_small_qty'||cl_small_qty);
cl_small_qty := (NVL(cl_small_qty,0) + NVL(small_syb_qty_issue,0));
cl_small_qty := (NVL(cl_small_qty,0) - NVL(small_syb_qty_rec,0));
cl_small_qty := (NVL(cl_small_qty,0) - NVL(small_syb_qty_rec_iner,0));
small_syb_qty_ADJ := -1 * NVL(small_syb_qty_ADJ,0);
cl_small_qty := (NVL(cl_small_qty,0) + NVL(small_syb_qty_ADJ,0));
-- srw.message(2000,'cl_small_qty'||cl_small_qty); srw.message(2000,'cl_small_qty'||cl_small_qty);
INSERT INTO STOCK_AT_DATE_REP2
VALUES(R.STORE_CODE,R.ITEM_CODE,cl_big_qty,cl_small_qty,R.ST_UNIT,R.SA_UNIT,:DATE_FRM,
:DATE_TO,0,0,0,0,0,0,0,0,cl_big_qty,cl_small_qty);
cl_big_qty := 0;
cl_small_qty := 0;
END LOOP;
COMMIT;
FOR R IN C2
LOOP
-- Transerfer Data 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(CART_QTY,0)) ,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_issue,small_issue
FROM IM_TRANS_ISSUE_HEADER A,IM_TRANS_ISSUE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.DEL_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('ISSUED BIG'||' '||big_syb_qty_issue);
exception
when no_data_found then
big_issue := 0;
small_issue := 0;
when others then MESSAGE(10,sqlerrm);
END ;
-- Goods Received Data From Supplier 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(B.CART_QTY,0)),SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,BI_SUPP_REC,SM_SUPP_REC
FROM IM_GOODS_RECIEVE_HEADER A,IM_GOODS_RECIEVE_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('1- SM_SUPP_REC '||' '||SM_SUPP_REC );
-- SHOW_MESSAGE('RECEIVED FROM SUPPLIER BIG'||' '||big_syb_qty_rec);
exception
when no_data_found then
BI_SUPP_REC := 0;
SM_SUPP_REC := 0;
when others then message(10,sqlerrm);
END ;
-- Adjustement Data 2
BEGIN
SELECT B.ITEM_CODE ,SUM(NVL(CART_QTY,0)) ADJUST_QTY,SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,big_ADJ,small_ADJ
FROM IM_ADJUST_HEADER A,IM_ADJUST_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND B.STORE_CODE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND A.DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- SHOW_MESSAGE('Adjust BIG'||' '||big_syb_qty_ADJ);
exception
when no_data_found then
big_ADJ := 0;
small_ADJ := 0;
when others then message(10,sqlerrm);
END ;
-- Goods Received Data From Stores 2
BEGIN
SELECT B.ITEM_CODE,SUM(NVL(B.CART_QTY,0)),SUM(NVL(ITEM_QUANTITY,0))
INTO item_syb_code,BI_INTER,SM_INTER
FROM IM_TRANS_REC_HEADER A,IM_TRANS_REC_DETAILS B
WHERE A.DOC_CODE = B.DOC_CODE
AND REC_STORE = R.STORE_CODE
AND ITEM_CODE = R.ITEM_CODE
AND DOC_DATE BETWEEN :DATE_FRM AND :DATE_TO
GROUP BY
B.ITEM_CODE;
-- show_message('here');
-- SHOW_MESSAGE('Received From Stores BIG'||' '||big_syb_qty_rec_iner);
exception
when no_data_found then
BI_INTER := 0;
SM_INTER := 0;
when others then message(10,sqlerrm);
END ;
BEGIN
BIG_QTY_OPEN := 0;
SMALL_QTY_OPEN := 0;
BEGIN
SELECT NVL(S_BIG_QTY_OPEN,0) ,NVL(S_SMALL_QTY_OPEN,0)
INTO
BIG_QTY_OPEN,SMALL_QTY_OPEN
FROM STOCK_AT_DATE_REP2
WHERE S_STORE_CODE = R.STORE_CODE
AND S_ITEM_CODE = R.ITEM_CODE;
END;
BIG_QTY_OPEN := ((BIG_QTY_OPEN) + NVL(big_issue,0));
BIG_QTY_OPEN := ((BIG_QTY_OPEN) - NVL(BI_SUPP_REC,0));
big_adj := -1 * NVL(big_adj,0);
BIG_QTY_OPEN := ((BIG_QTY_OPEN) + NVL(big_adj,0));
BIG_QTY_OPEN := ((BIG_QTY_OPEN) - NVL(BI_INTER,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) + NVL(SMALL_issue,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) - NVL(SM_SUPP_REC ,0));
SMALL_adj := -1 * NVL(SMALL_adj,0);
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) + NVL(SMALL_adj,0));
SMALL_QTY_OPEN := ((SMALL_QTY_OPEN) - NVL(SM_INTER,0));
END;
BEGIN
UPDATE STOCK_AT_DATE_REP2
SET BIG_SUP_REC = BI_SUPP_REC,
SMALL_SUP_REC = SM_SUPP_REC,
BIG_ISSUE_TRAN = big_issue,
SMALL_ISSUE_TRAN = SMALL_issue,
BIG_ADJUST = big_adj,
SMALL_ADJUST = SMALL_adj,
BIG_INTER_REC = BI_INTER,
SMALL_INTER_REC = SM_INTER,
S_BIG_QTY_OPEN = BIG_QTY_OPEN,
S_SMALL_QTY_OPEN = SMALL_QTY_OPEN
WHERE S_STORE_CODE = R.STORE_CODE
AND S_ITEM_CODE = R.ITEM_CODE;
exception
when no_data_found then
NULL;
when others then
message(10,sqlerrm);
END;
END LOOP;
COMMIT;
SET_APPLICATION_PROPERTY(CURSOR_STYLE,'default');
SYNCHRONIZE;
-- SHOW_MESSAGE('The Data Have Been Calculated !!!');
END;
declare
pl_id ParamList;
APPLICATION_ID VARCHAR2(20):='PRD';
COMMAND_LINE VARCHAR2(100) :='STOCK_LEDGER';
BEGIN
pl_id := Get_Parameter_List('tmpdata');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('tmpdata');
Add_Parameter(pl_id,'DATE_FRM',TEXT_PARAMETER,:DATE_FRM);
Add_Parameter(pl_id,'DATE_TO',TEXT_PARAMETER,:DATE_TO);
Add_Parameter(pl_id,'ITEM_FRM',TEXT_PARAMETER,:ITEM_FRM);
Add_Parameter(pl_id,'ITEM_TO',TEXT_PARAMETER,:ITEM_TO);
Add_Parameter(pl_id,'FRM_STORE',TEXT_PARAMETER,:FRM_STORE);
IF :REPORT_TYPE = 1 THEN
Run_Product(REPORTS,'C:\INV\RDF\STOCK_LEDGER.rdf',SYNCHRONOUS,RUNTIME,
FILESYSTEM, pl_id,NULL);
ELSIF :REPORT_TYPE = 2 THEN
Run_Product(REPORTS,'C:\INV\RDF\STOCK_LEDGER_2.rdf',SYNCHRONOUS,RUNTIME,
FILESYSTEM, pl_id,NULL);
END IF;
END;
Waiting for your valuable answer
Best Regards
Jamil AlshaibaniMake a matte in Photoshop.
From the Photoshop menu bar: File > New > Film & Video Presets. Choose one that suits your FCP project pixel dimensions. Make the background black. Place a white rectangle with rounded corners on top (the white will determine how much of your picture is visible). Flatten Image. Save as TIFF. Import into FCP.
Move your video clips up to V2. Place the imported TIFF on V1. Highlight all clips on V2.
Go to Modify > Composite Mode > Travel Matte Luma. Done.
If you want soft edges, no need for a matte. Double click your clip to place it in the Viewer. Open up the Motion tab > Crop > Edge Feather. Nice and quick. Copy and Paste attributes for the other clips. -
How can i make the optimiser to skip this full table scan ??
Hi,
I am trying to tune the below query, I have checked up all the possibilities to skip the full table scan on vhd_calldesh_archive, But am unable to find the predicate in the where clause, which is letting the optimiser to choose the full table scan on vhd_calldesk_archive table, which is very large one. how can i make the optimiser to skip this full table scan.
Please check the below sql script and explain plan ,
SELECT a.call_id, a.entry_date,
NVL (INITCAP (b.full_name), caller_name) AS caller_name,
c.description AS org_desc, a.env_id, i.env_desc, a.appl_id,
d.appl_desc, a.module_id, e.module_desc, a.call_type_id,
f.call_type_desc, a.priority, a.upduserid,
INITCAP (g.full_name) AS lastupdated_username, a.call_desc, h.mode_desc,
a.received_time,a.assignment_team, a.status,
ROUND (lcc.pkg_com.fn_datediff ('MI',
a.entry_date,
a.status_date
) AS elapsed_time,
ROUND (lcc.pkg_com.fn_datediff ('MI',
a.entry_date,
a.status_date
) AS resolved_min,
CASE
WHEN a.orgid in (1,100,200) THEN a.orgid
ELSE j.regionorgid
END AS region
,(SELECT coalesce(MAX(upddate),a.upddate) FROM lcc.vhd_callstatus stat WHERE stat.call_id = a.call_id
) as stat_upddate
,(SELECT team_desc from lcc.vhd_teams t where t.team_id = a.assignment_team) as team_desc
,a.eta_date
,coalesce(a.caller_contact, b.telephone) AS caller_contact
,coalesce(a.caller_email, b.email) as email
,a.affected_users
,a.outage_time
,a.QA_DONE
,a.LAST_ACTION_TEAM
,a.LAST_ACTION_USER
,INITCAP (k.full_name) AS last_action_username
,a.last_action_date
,l.team_desc as last_action_teamdesc
,a.refid
,INITCAP (lu.full_name) AS logged_name
,a.pmreview
,a.status as main_status
FROM lcc.vhd_calldesk_archive a
LEFT OUTER JOIN lcc.lcc_userinfo_details b ON b.user_name = a.caller_id
INNER JOIN lcc.com_organization c ON c.code = a.orgid
INNER JOIN lcc.vhd_applications d ON d.appl_id = a.appl_id
INNER JOIN lcc.vhd_modules e ON e.appl_id = a.appl_id AND e.module_id = a.module_id
INNER JOIN lcc.vhd_calltypes f ON f.call_type_id = a.call_type_id
INNER JOIN lcc.com_rptorganization j ON j.orgid = a.orgid AND j.tree = 'HLPDK'
LEFT OUTER JOIN lcc.lcc_userinfo_details g ON g.user_name = a.upduserid
LEFT OUTER JOIN lcc.vhd_callmode h ON h.mode_id = a.mode_id
LEFT OUTER JOIN lcc.vhd_environment i ON i.appl_id = a.appl_id AND i.env_id = a.env_id
LEFT OUTER JOIN lcc.lcc_userinfo_details k ON k.user_name = a.last_action_user
LEFT OUTER JOIN lcc.vhd_teams l ON l.team_id = a.last_action_user
LEFT OUTER JOIN (select CALL_ID,upduserid FROM lcc.VHD_CALLDESK_HISTORY P where upddate
in ( select min(upddate) from lcc.VHD_CALLDESK_HISTORY Q WHERE Q.CALL_ID = P.CALL_ID
group by call_id)) ku
ON ku.call_id = a.call_id
LEFT OUTER JOIN lcc.lcc_userinfo_details lu ON NVL(ku.upduserid,A.upduserid) = lu.user_name;
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 2104 | 3667K| 37696 |
| 1 | UNION-ALL | | | | |
| 2 | NESTED LOOPS OUTER | | 2103 | 3665K| 37683 |
| 3 | VIEW | | 2103 | 3616K| 35580 |
| 4 | NESTED LOOPS OUTER | | 2103 | 823K| 35580 |
| 5 | NESTED LOOPS OUTER | | 2103 | 774K| 33477 |
| 6 | NESTED LOOPS OUTER | | 2103 | 685K| 31374 |
| 7 | NESTED LOOPS | | 2103 | 636K| 29271 |
| 8 | NESTED LOOPS | | 2103 | 603K| 27168 |
| 9 | NESTED LOOPS OUTER | | 2103 | 558K| 25065 |
| 10 | NESTED LOOPS OUTER | | 2103 | 515K| 22962 |
| 11 | NESTED LOOPS | | 2103 | 472K| 20859 |
| 12 | NESTED LOOPS | | 2103 | 429K| 18756 |
| 13 | NESTED LOOPS OUTER | | 4826 | 890K| 13930 |
| 14 | NESTED LOOPS OUTER | | 4826 | 848K| 9104 |
| 15 | NESTED LOOPS | | 4826 | 754K| 4278 |
|* 16 | TABLE ACCESS FULL | COM_RPTORGANIZATION | 75 | 1050 | 3 |
| 17 | TABLE ACCESS BY INDEX ROWID | VHD_CALLDESK | 64 | 9344 | 57 |
|* 18 | INDEX RANGE SCAN | VHD_CALLDSK_ORGID | 2476 | | 7 |
| 19 | VIEW PUSHED PREDICATE | | 1 | 20 | 1 |
|* 20 | FILTER | | | | |
| 21 | TABLE ACCESS BY INDEX ROWID | VHD_CALLDESK_HISTORY | 1 | 20 | 2 |
|* 22 | INDEX RANGE SCAN | VHD_CALLDSK_HIST_CALLID_IDX | 1 | | 1 |
|* 23 | FILTER | | | | |
| 24 | SORT GROUP BY NOSORT | | 1 | 12 | 2 |
| 25 | TABLE ACCESS BY INDEX ROWID | VHD_CALLDESK_HISTORY | 1 | 12 | 2 |
|* 26 | INDEX RANGE SCAN | VHD_CALLDSK_HIST_CALLID_IDX | 1 | | 1 |
| 27 | TABLE ACCESS BY INDEX ROWID | VHD_CALLMODE | 1 | 9 | 1 |
|* 28 | INDEX UNIQUE SCAN | VHD_CALLMOD_MODID_PK | 1 | | |
| 29 | TABLE ACCESS BY INDEX ROWID | VHD_APPLICATIONS | 1 | 20 | 1 |
|* 30 | INDEX UNIQUE SCAN | VHD_APPL_APPLID_PK | 1 | | |
| 31 | TABLE ACCESS BY INDEX ROWID | VHD_CALLTYPES | 1 | 21 | 1 |
|* 32 | INDEX UNIQUE SCAN | VHD_CALLTYP_ID_PK | 1 | | |
| 33 | TABLE ACCESS BY INDEX ROWID | VHD_TEAMS | 1 | 21 | 1 |
|* 34 | INDEX UNIQUE SCAN | VHD_TEAMID_PK | 1 | | |
| 35 | TABLE ACCESS BY INDEX ROWID | VHD_ENVIRONMENT | 1 | 21 | 1 |
|* 36 | INDEX UNIQUE SCAN | VHD_ENV_APLENVID_PK | 1 | | |
| 37 | TABLE ACCESS BY INDEX ROWID | VHD_MODULES | 1 | 22 | 1 |
|* 38 | INDEX UNIQUE SCAN | VHD_MOD_APLMOD_ID_PK | 1 | | |
| 39 | TABLE ACCESS BY INDEX ROWID | COM_ORGANIZATION | 1 | 16 | 1 |
|* 40 | INDEX UNIQUE SCAN | COM_ORG_PK | 1 | | |
| 41 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 |
|* 42 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 43 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 43 |
|* 44 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 45 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 | 1
|* 46 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 47 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 | 1
|* 48 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 49 | NESTED LOOPS OUTER | | 1 | 1785 | 13 |
| 50 | VIEW | | 1 | 1761 | 12 |
| 51 | NESTED LOOPS OUTER | | 1 | 1656 | 12 |
| 52 | NESTED LOOPS OUTER | | 1 | 1632 | 11 |
| 53 | NESTED LOOPS OUTER | | 1 | 1608 | 10 |
| 54 | NESTED LOOPS | | 1 | 1565 | 9 |
| 55 | NESTED LOOPS | | 1 | 1549 | 9 |
| 56 | NESTED LOOPS | | 1 | 1535 | 9 |
| 57 | NESTED LOOPS OUTER | | 1 | 1513 | 8 |
| 58 | NESTED LOOPS OUTER | | 1 | 1492 | 7 |
| 59 | NESTED LOOPS | | 1 | 1471 | 6 |
| 60 | NESTED LOOPS | | 1 | 1450 | 5 |
| 61 | NESTED LOOPS OUTER | | 1 | 1430 | 4 |
| 62 | NESTED LOOPS OUTER | | 1 | 1421 | 3 |
| 63 | TABLE ACCESS FULL | VHD_CALLDESK_ARCHIVE | 1 | 1401 | 2 |
| 64 | VIEW PUSHED PREDICATE | | 1 | 20 | 1 |
|* 65 | FILTER | | | | |
| 66 | TABLE ACCESS BY INDEX ROWID | VHD_CALLDESK_HISTORY | 1 | 20 | 2 |
|* 67 | INDEX RANGE SCAN | VHD_CALLDSK_HIST_CALLID_IDX | 1 | | 1 |
|* 68 | FILTER | | | | |
| 69 | SORT GROUP BY NOSORT | | 1 | 12 | 2 |
| 70 | TABLE ACCESS BY INDEX ROWID| VHD_CALLDESK_HISTORY | 1 | 12 | 2 |
|* 71 | INDEX RANGE SCAN | VHD_CALLDSK_HIST_CALLID_IDX | 1 | | 1 |
| 72 | TABLE ACCESS BY INDEX ROWID | VHD_CALLMODE | 1 | 9 | 1 |
|* 73 | INDEX UNIQUE SCAN | VHD_CALLMOD_MODID_PK | 1 | | |
| 74 | TABLE ACCESS BY INDEX ROWID | VHD_APPLICATIONS | 1 | 20 | 1 |
|* 75 | INDEX UNIQUE SCAN | VHD_APPL_APPLID_PK | 1 | | |
| 76 | TABLE ACCESS BY INDEX ROWID | VHD_CALLTYPES | 1 | 21 | 1 |
|* 77 | INDEX UNIQUE SCAN | VHD_CALLTYP_ID_PK | 1 | | |
| 78 | TABLE ACCESS BY INDEX ROWID | VHD_TEAMS | 1 | 21 | 1 |
|* 79 | INDEX UNIQUE SCAN | VHD_TEAMID_PK | 1 | | |
| 80 | TABLE ACCESS BY INDEX ROWID | VHD_ENVIRONMENT | 1 | 21 | 1 |
|* 81 | INDEX UNIQUE SCAN | VHD_ENV_APLENVID_PK | 1 | | |
| 82 | TABLE ACCESS BY INDEX ROWID | VHD_MODULES | 1 | 22 | 1 |
|* 83 | INDEX UNIQUE SCAN | VHD_MOD_APLMOD_ID_PK | 1 | | |
| 84 | TABLE ACCESS BY INDEX ROWID | COM_RPTORGANIZATION | 1 | 14 | |
|* 85 | INDEX UNIQUE SCAN | COM_RPTORG_PK | 1 | | |
| 86 | TABLE ACCESS BY INDEX ROWID | COM_ORGANIZATION | 1 | 16 | |
|* 87 | INDEX UNIQUE SCAN | COM_ORG_PK | 1 | | |
| 88 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 43 |
|* 89 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 90 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 |
|* 91 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 92 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 | 1
|* 93 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
| 94 | TABLE ACCESS BY INDEX ROWID | LCC_USERINFO_DETAILS | 1 | 24 | 1
|* 95 | INDEX UNIQUE SCAN | LCCUSERINFOIND | 1 | | |
Predicate Information (identified by operation id):
16 - filter("J"."TREE"='HLPDK')
18 - access("J"."ORGID"="A"."ORGID")
20 - filter( EXISTS (SELECT /*+ */ 0 FROM "LCC"."VHD_CALLDESK_HISTORY" "Q" WHERE "Q"."CALL_ID"=:B1
"Q"."CALL_ID" HAVING MIN("Q"."UPDDATE")=:B2))
22 - access("SYS_ALIAS_2"."CALL_ID"="A"."CALL_ID")
23 - filter(MIN("Q"."UPDDATE")=:B1)
26 - access("Q"."CALL_ID"=:B1)
28 - access("H"."MODE_ID"(+)="A"."MODE_ID")
30 - access("D"."APPL_ID"="A"."APPL_ID")
32 - access("F"."CALL_TYPE_ID"="A"."CALL_TYPE_ID")
34 - access("L"."TEAM_ID"(+)="A"."LAST_ACTION_TEAM")
36 - access("I"."APPL_ID"(+)="A"."APPL_ID" AND "I"."ENV_ID"(+)="A"."ENV_ID")
38 - access("E"."APPL_ID"="A"."APPL_ID" AND "E"."MODULE_ID"="A"."MODULE_ID")
40 - access("C"."CODE"="A"."ORGID")
42 - access("K"."USER_NAME"(+)="A"."LAST_ACTION_USER")
44 - access("B"."USER_NAME"(+)="A"."CALLER_ID")
46 - access("G"."USER_NAME"(+)="A"."UPDUSERID")
48 - access("LU"."USER_NAME"(+)=NVL("SYS_ALIAS_4"."UPDUSERID_162","SYS_ALIAS_4"."UPDUSERID_25"))
65 - filter( EXISTS (SELECT /*+ */ 0 FROM "LCC"."VHD_CALLDESK_HISTORY" "Q" WHERE "Q"."CALL_ID"=:B1
"Q"."CALL_ID" HAVING MIN("Q"."UPDDATE")=:B2))
67 - access("SYS_ALIAS_2"."CALL_ID"="SYS_ALIAS_1"."CALL_ID")
68 - filter(MIN("Q"."UPDDATE")=:B1)
71 - access("Q"."CALL_ID"=:B1)
73 - access("H"."MODE_ID"(+)="SYS_ALIAS_1"."MODE_ID")
75 - access("D"."APPL_ID"="SYS_ALIAS_1"."APPL_ID")
77 - access("F"."CALL_TYPE_ID"="SYS_ALIAS_1"."CALL_TYPE_ID")
79 - access("L"."TEAM_ID"(+)=TO_NUMBER("SYS_ALIAS_1"."LAST_ACTION_USER"))
81 - access("I"."APPL_ID"(+)="SYS_ALIAS_1"."APPL_ID" AND "I"."ENV_ID"(+)="SYS_ALIAS_1"."ENV_ID")
83 - access("E"."APPL_ID"="SYS_ALIAS_1"."APPL_ID" AND "E"."MODULE_ID"="SYS_ALIAS_1"."MODULE_ID")
85 - access("SYS_ALIAS_1"."ORGID"="J"."ORGID" AND "J"."TREE"='HLPDK')
87 - access("C"."CODE"="SYS_ALIAS_1"."ORGID")
89 - access("B"."USER_NAME"(+)="SYS_ALIAS_1"."CALLER_ID")
91 - access("SYS_ALIAS_1"."UPDUSERID"="G"."USER_NAME"(+))
93 - access("K"."USER_NAME"(+)="SYS_ALIAS_1"."LAST_ACTION_USER")
95 - access("LU"."USER_NAME"(+)=NVL("SYS_ALIAS_3"."UPDUSERID_162","SYS_ALIAS_3"."UPDUSERID_25"))
Note: cpu costing is offI've tried to look thru your sql and changed it a bit. Of course not testet :-)
Your problem isn't the archive table! I tried to remove the 2 selects from the select-clause. Furthermore you have a lot of nested loops in your explain, which is a performance-killer. Try getting rid of them, perhaps use /*+ USE_HASH(?,?) */.
SELECT a.call_id, a.entry_date,
NVL (INITCAP (b.full_name), caller_name) AS caller_name, c.description AS org_desc, a.env_id, i.env_desc, a.appl_id,
d.appl_desc, a.module_id, e.module_desc, a.call_type_id, f.call_type_desc, a.priority, a.upduserid,
INITCAP (g.full_name) AS lastupdated_username, a.call_desc, h.mode_desc, a.received_time, a.assignment_team, a.status,
ROUND (lcc.pkg_com.fn_datediff ('MI', a.entry_date, a.status_date)) AS elapsed_time,
ROUND (lcc.pkg_com.fn_datediff ('MI', a.entry_date, a.status_date)) AS resolved_min,
CASE
WHEN a.orgid IN (1, 100, 200)
THEN a.orgid
ELSE j.regionorgid
END AS region,
COALESCE (stat.upddate, a.upddate) AS stat_upddate,
t.team_desc, a.eta_date,
COALESCE (a.caller_contact, b.telephone) AS caller_contact,
COALESCE (a.caller_email, b.email) AS email, a.affected_users,
a.outage_time, a.qa_done, a.last_action_team, a.last_action_user,
INITCAP (k.full_name) AS last_action_username, a.last_action_date,
l.team_desc AS last_action_teamdesc, a.refid,
INITCAP (lu.full_name) AS logged_name, a.pmreview,
a.status AS main_status
FROM lcc.vhd_calldesk_archive a, lcc.lcc_userinfo_details b, lcc.com_organization c,
lcc.vhd_applications d, lcc.vhd_modules e, lcc.vhd_calltypes f, lcc.com_rptorganization j,
lcc.lcc_userinfo_details g, lcc.vhd_callmode h, lcc.vhd_environment i, lcc.lcc_userinfo_details k,
lcc.vhd_teams l,
(SELECT call_id, upduserid
FROM lcc.vhd_calldesk_history p
WHERE upddate IN (SELECT MIN (upddate)
FROM lcc.vhd_calldesk_history q
WHERE q.call_id = p.call_id
GROUP BY call_id)) ku,
lcc.lcc_userinfo_details lu,
(SELECT call_id, MAX (upddate)
FROM lcc.vhd_callstatus
GROUP BY call_id) stat,
lcc.vhd_teams t
WHERE a.caller_id = b.user_name(+)
AND a.orgid = c.code
AND a.appl_id = d.appl_id
AND a.appl_id = e.appl_id
AND a.module_id = e.module_id
AND a.call_type_id = f.call_type_id
AND a.orgid = j.orgid
AND j.tree = 'HLPDK'
AND a.upduserid = g.user_name(+)
AND a.mode_id = h.mode_id(+)
AND a.appl_id = i.appl_id(+)
AND a.env_id = i.env_id(+)
AND a.last_action_user = k.user_name(+)
AND a.last_action_user = l.team_id(+)
AND a.call_id = ku.call_id(+)
AND NVL (ku.upduserid, a.upduserid) = lu.user_name(+)
AND a.call_id = stat.call_id
AND a.assignment_team = t.team_id; -
I need to play a song in a row in a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through out the presentation ?
Thanks.Drag the file into the audio window in the Document inspector...
-
How can I make the spry accordion remember the panel open
when I refresh the page or jump to a new page?
I am using the accordion feature on all my pages as a
navigation aid. It has three panels. When you refresh the page the
panel goes back to the default pane... Is there a way of
controlling this so that the browser can remember the pane that is
open (say set a variable, cookie, other?)Look for "Set the default open panel" on the following page:
http://labs.adobe.com/technologies/spry/articles/accordion_overview/index.html
Keep in mind you would need to change that bit of code on
every page. The only way to do it more dynamically would be to
include a custom javascript or PHP/ASP style script in order to
change the value. -
My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
How can i make the text bigger?
How can i make the text bigger?
1. press "T" to bring up the text tool.
2. click the text you want to edit
3. highlight the text you want to change size with your cursur
4. If it's not already up, press Command + T to bring up the text tool box and adjust the size under the character group. The value you want to change will have a "TT" next to it.
If this doesn't help. More details will help us help you.
Maybe you are looking for
-
Conditional Mapping issue - Need help Urgently
Hi Experts, We have a requirement for conditional mapping for HFM. When the value of certain account is positive, it is mapped to one account, else, to a different account. We are able to achieve this in the conditional mapping. Once the mapping is d
-
How to get back contacts and correct Gmail address and account
Spoke on the phone with a support tech to fix a problem. Eventually he cleared out a lot of info. He said any info that was not saved is what would be eliminated. That seemed to include all of my contacts. And I had to restart my Gmail. And my
-
Impact Of eCATT Version Upgarde From 3.1 To 3.2
Dear All, There is a query related to version upgrade of eCATT from 3.1 to 3.2. The Web Application Server is 6.20 with Patch level 46. What will be the impact of the version upgrade of eCATT to the already existing scripts which were developed in ve
-
Is there any way of passing an IDOC contents to a BAPI directly, rather than reading the data from the IDOC segments and populating the BAPI structures manually? The IDOC is generated from a Purchase Order created in the same client and so cannot be
-
Childrens accounts and payment method bypass
when i am trying to set up a child's account under my apple id, it is asking me for a payment method and saying i only have a Debit card on file when it is a visa. how do i fix this? I can't go past this step