How can I manually enter MIDI channel number in Control Surface expert Value Change field?
I am creating a software interface for a multidimensional controller which can transmit many linear values at the same time. I can not use Learn mode because it always sends data from all sources, but I can split them by MIDI channels. I would like to manually enter controlling values into Control Surface expert view.
I seem to be able only to input the message, but not MIDI channel on which it is transmitted.
Stupid me, it's hex... so 80 is Note Off ch 1, 90 Note On ch 1 etc
Similar Messages
-
How Can I separate my MIDI Channels with layered instruments in MainStage 2 With my Axiom 61?
I have been at it for 3 days straight. I want to play an internal instrument (EVB3 for example) and trigger samples with the EXS24 without triggering notes from the other instrument. I have my keyboard set to MIy help meDI channel 1 and my drum pads set to MIDI channel 10. The still play together. I've tried changing MIDI input on both channel strips to multitimbral, Channel 1 for the keyboard and channel 10 for the drum pads. Still playing together. I've tried changing attributes in the Mapping screen. Still...
I don't think its the Axiom. I've tried changing MIDI CC numbers but then it won't talk to either instrument. I'm currently using MIDI cables into a 3rd generation M-Box. I've tried using USB as well. Please, somebody help me!!Sorry for the late responce, I've been in program mode and haven't had a chance to come back to this.
I figured it out. It was an option that I had over looked in the Assignments & Mapping tab in Edit Mode. At the bottom of the window that says All Devices. In that menu there is another tab that says Channel 1-16. If you click where it says Unassigned, down in the Screen Control Inspector there is a checked box that says "Send unassigned MIDI to all Channel Strips". If you uncheck that box then everything works perfectly. It is a little extra work having to assign the keyboard everytime you ad a channel strip but when you have to do some serious programming it's worth it.
Anyone who needs to program with multiple devices should uncheck this right out of the gate. It will save you from pulling your hair out.
Thank you Bruno for your help. It is much appreciated. -
How can I add a new channel in CWAI control in Borland C++ Builder 5.0
I'm using Borland C++ Builder 5.0 and CWAI control of ComponentWorks to get the analog signal from DAQ card.
I want to delete or add a new channel object in CWAI control when the program is running.
So I did:
CWAI1->Channels->RemoveAll(); <--It seems to work fine
CWAI1->Channels->Add((wchar_t*)0,upperlimit,lowerlimit,InputMode,Coupling);
But,It does not work in second line. I can't understand what is wrong.
Please answer me this question.I'm using Borland C++ Builder 5.0 and CWAI control of ComponentWorks to get the analog signal from DAQ card.
I want to delete or add a new channel object in CWAI control when the program is running.
So I did:
CWAI1->Channels->RemoveAll(); <--It seems to work fine
CWAI1->Channels->Add((wchar_t*)0,upperlimit,lowerlimit,InputMode,Coupling);
But,It does not work in second line. I can't understand what is wrong.
Please answer me this question. -
(EXCUSE MY ALL CAPS - VISION PROBLEM)
PASSWORD CAPTURE IS A GREAT FEATURE! BUT - ON SOME FEW SITES, FIREFOX CANNOT CAPTURE USER I.D. AND PASSWORD - SO - HOW CAN I MANUALLY ENTER THIS INFO INTO 'SAVED PASSWORD' UNDER TOOLS/OPTIONS?
THANK YOU: JNRBe aware that if Firefox doesn't offer to store a password then Firefox probably won't fill the password as well if you visit that website and sign on.<br />
In that case you can try to type the first letter of the name and/or double click the name field or press the cursor Down arrow.
Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Deselect: [ ] "Permanent Private Browsing mode"
The website may be using autocomplete=off to prevent Firefox from saving the name and password.<br />
If that is the case then you can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
*http://kb.mozillazine.org/User_name_and_password_not_remembered -
My credit card will expire in few days. how can I re enter a new credit card number in my AppleID?
my credit card will expire in few days. how can I re enter a new credit card number in my AppleID?
Dear FoxFifth
thank you for your response. I solved the problem. Not accessing Payment information through iTunes & Store but trough iCloud.
thank you very much
Miro -
How can I manually transfer album artwork from my library to my iPod
I downloaded album artwork to the songs in my library, and now I want to get the artwork onto the songs on my iPod classic. Problem is, I manually manage the songs on my ipod, instead of auto-syncing.... so when I hit the "sync" button in the latest version of iTunes (11.1.1.11), nothing happens. There also isn't a "show album artwork on iPod" button anymore. I'm afraid to change my settings from manual to automatic syncing, because I have lots of playlists on my iPod that aren't in my library, and I don't know if these playlists will be removed during the auto-sync. So how can I manually get the album artwork onto my iPod?
Thanks,
RobYou can only backup iOS devices.
Sadly the old trick of removing all artwork and then adding it all back again no longer works. You may get some joy if you removed the specific album, then add it back again, butgenerally once things go wrong with artwork on a classic the only option is to restore it. Not a problem if all the media is in your library and you sync with a small number of selected playlists. If you don't have all the media see Recover your iTunes library from your iPod or iOS device.
tt2 -
How can I see the alpha channel in the channels palette?
Hello, mi format plugin loads a rgba image. I see it with transparency, that's ok, but when I go to the channels tab I only see 4 items (RGB, Red, Green and Blue).
How can I see the alpha channel of my file in the channel tab?
Thanks!OK, something must be wrong... but I don't find it!
That's my whole code (resumed). I ommit some code (saving file code (not used) or main function, where I only call te "DoSomething" functions. You can see that I use layers. The DoReadContinue function is only used to show the preview.
In the DoReadStart function I set the parameters for the layers (and the preview), and I fill the "data" and "layerName" params in the DoReadLayerContinue function. I hope you can understand the code!
const int32 IMAGE_DEPTH = 32;
SPBasicSuite * sSPBasic = NULL;
SPPluginRef gPluginRef = NULL;
FormatRecord * gFormatRecord = NULL;
intptr_t * gMxiInfoHandle = NULL;
MXIInfo* gMxiInfo = NULL;
int16 * gResult = NULL;
#define gCountResources gFormatRecord->resourceProcs->countProc
#define gGetResources gFormatRecord->resourceProcs->getProc
#define gAddResource gFormatRecord->resourceProcs->addProc
CmaxwellMXI* cMax;
static void DoReadPrepare (void){
gFormatRecord->maxData = 0;
static void DoReadStart(void){
char header[2];
ReadScriptParamsOnRead (); // override params here
if (*gResult != noErr) return;
// Read the file header
*gResult = SetFPos (gFormatRecord->dataFork, fsFromStart, 0);
if (*gResult != noErr) return;
ReadSome (sizeof( header ) * 2, &header);
if (*gResult != noErr) return;
// Check the magic number for avoid no-mxi files
int headerID = CheckIdentifier (header);
if( headerID != HEADER_MXI ) *gResult = formatCannotRead;
if (*gResult != noErr) return;
// The file is OK. Let's continue to obtain the data of the image.
cMax = new CmaxwellMXI( 0 );
strlen((char*)gFormatRecord->fileSpec->name);
gMxiInfo->filename = _strdup((char *)gFormatRecord->fileSpec->name + 1);
bool res = cMax->getMXIIInfo(
(const char*)gMxiInfo->filename,
gMxiInfo->width, gMxiInfo->height,
gMxiInfo->burn, gMxiInfo->monitorGamma, gMxiInfo->iso,
gMxiInfo->shutter, gMxiInfo->fStop, gMxiInfo->intensity,
gMxiInfo->scattering,
gMxiInfo->nMultilightChannels, gMxiInfo->lightNamesList,
gMxiInfo->availableBuffersMask,
gMxiInfo->widthPreview, gMxiInfo->heightPreview,
gMxiInfo->bufferPreview);
if(!res) return;
// Check the available extra buffers
int count = 0;
if( gMxiInfo->availableBuffersMask & CmaxwellMXI::ALPHA_BUFFER ){
// We will use that string to obtain later the desired extra buffer.
gMxiInfo->extraBuffersList[count] = "ALPHA";
gMxiInfo->hasAlpha = true;
count++;
else{
gMxiInfo->hasAlpha = false;
gMxiInfo->nExtraBuffers = count;
switch( IMAGE_DEPTH ){
case 8:
gMxiInfo->mode = plugInModeRGBColor;
break;
case 16:
gMxiInfo->mode = plugInModeRGB48;
break;
case 32:
gMxiInfo->mode = plugInModeRGB48; //96 gives me an error
break;
// SET UP THE DOCUMENT BASIC PARAMETERS.
VPoint imageSize;
if( gFormatRecord->openForPreview ){
// Preview always RGB8.
imageSize.v = gMxiInfo->heightPreview;
imageSize.h = gMxiInfo->widthPreview;
gFormatRecord->depth = 8;
gFormatRecord->imageMode = plugInModeRGBColor;
gFormatRecord->planes = 3;
gFormatRecord->loPlane = 0;
gFormatRecord->hiPlane = 2;
gFormatRecord->colBytes = 3;
gFormatRecord->rowBytes = imageSize.h * gFormatRecord->planes;
gFormatRecord->planeBytes = 1;
else{
// Configure the layers. All RGBA32.
imageSize.v = gMxiInfo->height;
imageSize.h = gMxiInfo->width;
gFormatRecord->depth = IMAGE_DEPTH;
gFormatRecord->imageMode = gMxiInfo->mode;
gFormatRecord->layerData =
2 + gMxiInfo->nMultilightChannels + gMxiInfo->nExtraBuffers;
gFormatRecord->planes = 4; // RGBA.
gFormatRecord->loPlane = 0;
gFormatRecord->hiPlane = 3;
gFormatRecord->planeBytes = IMAGE_DEPTH >> 3;
gFormatRecord->rowBytes = imageSize.h * gFormatRecord->planes * ( IMAGE_DEPTH >> 3 );
gFormatRecord->colBytes = gFormatRecord->planes * ( IMAGE_DEPTH >> 3 );
gFormatRecord->transparencyPlane = 3;
gFormatRecord->transparencyMatting = 1;
gFormatRecord->blendMode = PIBlendLinearDodge;
gFormatRecord->isVisible = true;
SetFormatImageSize(imageSize);
gFormatRecord->imageHRes = FixRatio(72, 1);
gFormatRecord->imageVRes = FixRatio(72, 1);
VRect theRect;
theRect.left = 0;
theRect.right = imageSize.h;
theRect.top = 0;
theRect.bottom = imageSize.v;
SetFormatTheRect(theRect);
// No resources for now.
if (sPSHandle->New != NULL) gFormatRecord->imageRsrcData = sPSHandle->New(0);
gFormatRecord->imageRsrcSize = 0;
return;
/// Called for prewiew only.
static void DoReadContinue (void){
// Dispose of the image resource data if it exists.
DisposeImageResources ();
if( gFormatRecord->openForPreview ){
VPoint imageSize = GetFormatImageSize();
gFormatRecord->data = gMxiInfo->bufferPreview;
if (*gResult == noErr) *gResult = gFormatRecord->advanceState();
if( gFormatRecord->data != NULL ){
delete[] (Crgb8*)gMxiInfo->bufferPreview;
gMxiInfo->bufferPreview = NULL;
gFormatRecord->data = NULL;
// De momento nos olvidamos de los icc profiles [TODO]
//DoReadICCProfile ();
static void DoReadFinish (void)
// Dispose of the image resource data if it exists.
DisposeImageResources ();
WriteScriptParamsOnRead (); // should be different for read/write
// write a history comment
AddComment ();
// Clean some memory.
if( gMxiInfo->lightNamesList != NULL ){
for( unsigned int i = 0; i < gMxiInfo->nMultilightChannels; i++){
if( gMxiInfo->lightNamesList[i] != NULL ){
delete[] gMxiInfo->lightNamesList[i];
gMxiInfo->lightNamesList[i] = NULL;
delete[] gMxiInfo->lightNamesList;
gMxiInfo->lightNamesList = NULL;
if( gMxiInfo->bufferPreview != NULL ){
delete[] gMxiInfo->bufferPreview;
gMxiInfo->bufferPreview = NULL;
if( gMxiInfo->filename != NULL ){
delete[] gMxiInfo->filename;
gMxiInfo->filename = NULL;
if( cMax != NULL ){
delete cMax;
cMax = NULL;
static void DoReadLayerStart(void){
// empty
static void DoReadLayerContinue (void){
int32 done;
int32 total;
VPoint imageSize = GetFormatImageSize();
// Set the progress bar data
done = gFormatRecord->layerData + 1;
total = gMxiInfo->nMultilightChannels + gMxiInfo->nExtraBuffers + 2;
// Dispose of the image resource data if it exists.
DisposeImageResources ();
uint32 bufferSize = imageSize.v * gFormatRecord->rowBytes;
int nPixels = gMxiInfo->width * gMxiInfo->height;
char* lightName = NULL;
// SET THE BLACK BACKGROUND
if( gFormatRecord->layerData == 0 ){
gFormatRecord->data = (void*)new byte[bufferSize];
for( int i = 0; i < nPixels; i++ ){
((float*)gFormatRecord->data)[ i * 4 ] =
((float*)gFormatRecord->data)[ i * 4 + 1 ] =
((float*)gFormatRecord->data)[ i * 4 + 2 ] = 0.0;
((float*)gFormatRecord->data)[ i * 4 + 3 ] = 1.0;
// Set the layer name.
gFormatRecord->layerName = new uint16[64];
gFormatRecord->layerName[0] = 'B';
gFormatRecord->layerName[1] = 'a';
gFormatRecord->layerName[2] = 'c';
gFormatRecord->layerName[3] = 'k';
gFormatRecord->layerName[4] = 'g';
gFormatRecord->layerName[5] = 'r';
gFormatRecord->layerName[6] = 'o';
gFormatRecord->layerName[7] = 'u';
gFormatRecord->layerName[8] = 'n';
gFormatRecord->layerName[9] = 'd';
gFormatRecord->layerName[10] = '\0';
// LOAD THE LIGHT LAYERS
else if( gFormatRecord->layerData < gMxiInfo->nMultilightChannels + 1 ){
void* lightBuffer = NULL;
void* alphaBuffer = NULL;
byte foob;
dword food;
// Get the light buffer.
bool res = cMax->getLightBuffer(
(char*)gMxiInfo->filename,
gFormatRecord->layerData - 1, IMAGE_DEPTH,
lightBuffer,
gMxiInfo->width, gMxiInfo->height, lightName);
if(!res){
*gResult = readErr;
return;
if( gMxiInfo->hasAlpha ){
// Get the alpha buffer.
res = cMax->getExtraBuffer(
(char*)gMxiInfo->filename,
"ALPHA", IMAGE_DEPTH, alphaBuffer,
food, food, foob);
if(!res){
*gResult = readErr;
return;
else{
alphaBuffer = (void*)new float[ gMxiInfo->width * gMxiInfo->height * 3 ];
for( int i = 0; i < nPixels; i++ ){
// Only need to set the red channel.
((float*)alphaBuffer)[ i * 3 ] = 1.0;
// Put them together.
gFormatRecord->data = (void*)new byte[bufferSize];
for( int i = 0; i < nPixels; i++ ){
((float*)gFormatRecord->data)[ i * 4 ] = ((float*)lightBuffer)[ i * 3 ];
((float*)gFormatRecord->data)[ i * 4 + 1 ] = ((float*)lightBuffer)[ i * 3 + 1 ];
((float*)gFormatRecord->data)[ i * 4 + 2 ] = ((float*)lightBuffer)[ i * 3 + 2 ];
((float*)gFormatRecord->data)[ i * 4 + 3 ] = ((float*)alphaBuffer)[ i * 3 ];
delete[] (float*)lightBuffer;
delete[] (float*)alphaBuffer;
// Set the layer name.
//LOAD THE EXTRA CHANNELS
if( ... ){
//READ THE RENDER BUFFER
if( ... ){
// User can abort.
if (gFormatRecord->abortProc()){
*gResult = userCanceledErr;
return;
// Commit the layer.
if (*gResult == noErr) *gResult = gFormatRecord->advanceState();
// Update the progress bar.
(*gFormatRecord->progressProc)( done, total );
// Free memory.
if( gFormatRecord->data != NULL ){
delete[] (float*)gFormatRecord->data;
gFormatRecord->data = NULL;
if( lightName != NULL ){
delete[] lightName;
lightName = NULL;
static void DoReadLayerFinish (void)
// Nothing to do.
And that's the image that I obtain loading a 8 layer image:
The layers have transparency (when I set "transparencyPlane" to -1, or 0, or 1, or 2, or 3, or 4....., I got the same result!). The blending mode is still "normal". I had set it to "linear dodge" The "isVisible" param works OK.
Alpha 1 is still black.
Is possible that I need to set something in the .r file? I had to add "FormatLayerSupport { doesSupportFormatLayers }," to manage layers, for instance. -
How do I manually enter code into an iweb page??
iweb blogging is not bad; but there are times when I want to enter html code by hand; maybe a form script or CSS code.
I tried inputting the code into the blog.html page, but it will vanish every time I update iweb.
So; how can I manually add code to an iweb page? Surely this is possible?
thanksOf course it's possible. Lots of us do that on our pages already. Two things to keep in mind...1. No way to do this via iWeb directly, so it involves editing the published html files, and 2. Because iWeb republishes the html files whenever you update the your webpage, you will lose your changes and have to redo them to add your HTML back.
The general directions are as follows (using banner code as an example)...
1. Decide where you want your banner and know exactly what dimensions you need.
2. Insert a text box onto your page and adjust its size to exactly your dimensions.
3. Type in some uniquely identifiable text like, "BANNERCODEHERE" without changing the font or anything else...just type it in.
4. Publish your page with iWeb.
5. Find the html file associated with your published page (either on your iDisk or in a folder depending on how you published) and open it in any text editor (like Microsoft Word, or Textedit, or anything).
6. Scroll through the html file and locate your placeholder text, e.g. "BANNERCODEHERE".
7. Replace the placeholder text with your html code and publish your page.
That's it. You should see your html coded element show up where you placed the text box.
If any of this information is useful to you, please do me a favor and mark my reply as "solved" or "helpful" using the little buttons that you see in the title bar of this reply. I would appreciate it immensely. Thank you. -
I Have a Lightroom been given 5 DVD,
and they want to sell, how can I test if the serial number has been entered beforeIf you never bought the product then you cannot get the serial number.
-
I have to install Photoshop CS4 extended on a new computer from a disk because my old computer had a hard drive crash. There is no serial number on the back of the case. How can I obtain a usable serial number?
Find your serial number quickly
You can activate software without following up and registering it... at least that was the case in the past. The serial number is normally located on the disc case or a box inside the main box. If you did not purchase the disc from Adobe then it is possible you would have dealt with a redemption code, in which case it would have been up to you to keep a record of the serial number, especially if you did not follow up and register the software. -
I used a third party programme called Mackeeper UGHHH SOOO Stupid i know,it moved loads of files to the trash now i do not know where they originally came from or belong!! the put back option is in grey??and will not work even when i highlight one by one!!
how can i manually put these files back where they belong?
i know i should have used time machine but i have not set it up and its too late for that now
i have been researching and racking my brain on how to put these folders and contents of them back to where they once were all of the contents of the folder are still in tact AND i have not emptied my trash,my programmes and some of my apps are not working properly now...i use my computer alot for making music and things are jumbled up now...
is there anyone out there who knows the answer to my prayers on how to go about putting these folders/files back to where they came from to restore functionality to my mac..Yes and thank u if u were going to tell me i HAVE un installed mackeeper...A very sad and upset Mac user!! Cheers Shanehello there thank u so much for ur reply!! ok i uninstalled mackeeper now and the put back option is still in grey im so confused...i tried restarting my computer like u said and put back still in grey??!! the files that are in my trash are everything from Accounts,address book plug-ins,address book,adobe,aim.........then stuff like apple,Audio,....to caches color pickers,colors,com.apple.TCC,to DVD player to facebook,google to ilifemedia browser to itunes to keychains to movie effects,preferences printers to skype...my Native instruments files BUT not all of them my garage band but not all of it...it seriously looks like my whole library is in the trash i tried to put things back where i THINK they belong and it just added the item or folder under where i thought it went and didnt restore functionality to for instance google chrome and all my book marks are there....they seem to be only certain things from my library that would have added some functionality to apps and programmes like my garageband is missing stuff photobooth wont work so on.......kinda looks a bit like this thats only the half of it!! Cheers shane!!!
-
I deleted my SMTP how can I re enter it?
How can I re-enter a deleted SMTP outgoing mail server?
What Are the Gmail SMTP Settings?
Problems sending mail with POP or IMAP - Gmail Help - Google Help -
When trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?
Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's -
HT3529 How can I remove my old phone number from my APPLE ID.
How can I stop my old phone number recieve my iMessage of my apple ID.
Turn off imessage in settings/messages, turn off Facetime in settings/facetime, delete the cloud account in settings/icloud and log out of your Apple ID in settings/itunes and app store.
Delete the phone from your profile in https://supportprofile.apple.com if you registered your phone there -
How can I find out the apn number of the battery without having it?
I dont have the battery of my iphone 5 anymore but how can i find out the apn number of the battery? I would like to change it but i need to know the apn number to choose the right battery.
Apple does not provide any user-serviceable parts (other than accessories or sometimes a SIM card tray).
Therefore, there are no legitimate iPhone batteries available for sale anywhere.
Anything you find will either be salvaged, counterfeit, or stolen.
Maybe you are looking for
-
Managing 2 iphone/iTunes accounts on one computer
Me an my wife both have iPhones. Each one is currently managed on separate profiles on our Macbook. This was fine to begin with, but now it's killing memory on the computer by having many of the same exact songs taking up memory twice (what would be
-
27" Display Atlona AT-DP400 + ATI 5970 = 720p only?
After the wife was nice enough to pick up two of these displays I went ahead and ordered a AT-DP400. I needed this because the ATI 5970 only has 1 Mini Displayport. After speaking the Atlona on the issue of the monitor not getting full resolution and
-
I am in Mexico, and pages like google or yahoo redirect to .mx sites. I would like to know how to keep them from redirecting, to stay at google.com / yahoo.com
-
Adding content via multiple computers
So here's what I got. For awhile I've been managing my iPhone on my computer. Syncing my apps, and manually adding music. I just purchased a new comp and I'm trying to manage my iPhone with it, but I'm unable to add any music to the phone via the new
-
Standard Workflow List for ESS
Can someone please give me a list of the standard workflows in ESS. Thanks