How can i map?

As the scenario is
In cement industry there are different grades of material like fine,superfine,enriched and so on.
As the scenario is by seeing the delivery print Client should know from which depot , which grade material is suppleid to which party?
Please help me in this query is there any possibilities of standards in SAP or do i should need a ABAPer for enhancement?
shiva

Hi shiva
Then as per your requirement as ABAP'er to assign smartform for the delivery output type and in smartform the ABAP'er will be writing the sub-routine in smartform and you should give the input data to the ABAP'er the depot name and material name(MATNR) and other tables and feilds.
Then ABAP'er will write the sub-routine that if cement 1 is delivered then that cement 1 name , price and the delivering address should come in the output type .In the same way if cement 2 is delivered then cement 2 name , price and the delivering address should come in the output .In that way you can maintain for all cement 1 to cement 1000 materials
Regards
Srinath

Similar Messages

How can I map the composite_dn name with a composite in run time

Hi All,
I want to craete a report on number of total business and system faults with the help of Information Publisher in OEM 12c Cloud Control. I am fetching data from the table composite_instance_fault present in SOAINFRA schema. Below os my SQL statement:-
select error_category,count(error_category) from prefix_SOAINFRA.composite_instance_fault where composite_dn=??EMIP_BIND_TARGET_GUID?? group by error_category
Now I want to know that how can I map the composite_dn name with a composite in run time. When we fetch data from the repository we used to map target in rumtime by using ??EMIP_BIND_TARGET_GUID?? but here as I am not fetching data from repository, how can I map target in run time.
On executing the above SQL statement its returing an empty table without any data.
Please guide!!
Thanks in Advance!!

Hi,
try something like this.
Mike
Attachments:
Unbenannt 5_LV80.vi ‏12 KB

How can i map the SLD of BWSEM and XI?

hai pals,
     how can i map WAS OF the BWSEM system and Xi system.
can u anybody help me out in this issue.
with cheers rajesh.

hi Rajesh,
If you want to create BW and SEM inside XI
you don't have to :
cause they're defined as products:
SAP BW     2.0B, 2.1C, 3.0A, 3.0B, 3.1 CONTENT
SAP SEM     2.0B, 3.0A, 3.0B, 3.1A, 3.1B, 3.2, 3.5, 4.0
you only have to define WAS fo those systems :
you nedd to have WAS of SEM and BW
(instances of those servers ) created as technical systems:
if you need a technical system take a look at my weblog:
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
you also nedd business systems for every Client (100,200 etc) mapped as business system
business system creation
http://help.sap.com/saphelp_nw04/helpdata/en/fe/39ae3d47afd652e10000000a114084/content.htm
Regards,
michal

How can we map a file in the recepents file in smtp server

hai all,
how can we map a file to teh recipents file in smtp server configuration.
because i didnt hard code the email id there so i has to kept any file or any variable so can any one help me out.
thanks,
Rajesh

Hi There
You can try to use SSIS expressions in your DTSX package which reads the values from the file and then populates the recipient field. This would require some script tasks to read the data and then populate the variables used in the SSIS expression.
[https://www.google.com/search?sclient=psy-ab&hl=en&safe=off&site=&source=hp&q=ssisexpressions&btnK=GoogleSearch#sclient=psy-ab&hl=en&safe=off&source=hp&q=sqlssisexpressions&oq=sqlssis+expressions&aq=f&aqi=&aql=&gs_sm=e&gs_upl=9137l9524l0l9847l4l3l0l0l0l1l522l522l5-1l1l0&bav=on.2,or.r_gc.r_pw.r_cp.,cf.osb&fp=67c17c5b88ef2530&biw=1440&bih=799]
It could be easier to configure a distribution list on your exchange server or domino server, and then send an email to the distribution list email address. Then you could manage the recipients from the mail server.
Another way to achieve this, is to put a prompt in the data manager package to pass the recipient email addresses, and then pass that value to script logic. In the script logic it would call a stored procedure with the dynamic input and send the mail.
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d01ce779-f1b2-2b10-07ba-da3734013245]
You could use the SMTP relay functions from SQL server.
There are various options available. each option has pro's and con's you will need to decide which is better and easier to manage.
I hope this helps.
kind Regards
Daniel

What is Investment allowance on asset. and How can we map into SAP?

Hi all,
I want know what is investment allowance on asset and how can we map into sap?
Thank you in advance.
Regards,
Chandu.

hello chandu ,
In order to encourage substantial investment in plant or machinery clause 5 of the Finance Bill, 2013 seeks to insert new section 32AC in the Income-tax Act, 1961 to provide for deduction for
investment in new plant or machinery by a company. It is allowed over and above the depreciation rates. This is for tax calculation purpose for availing this benefit so many conditions to be fullfilled. In sap this can be handled through development only. n.selvakumar.

How can i map a file with different structures to several deep structures?

Hey experts,
here is my situation. I have to build a file2file scenario. The file has a flat structure without any separators. Depending on the value of the keyfield, i have to determinate, which kind of structure in the current sequence there is. Like i wrote, there isn't any fieldseparator, but for every possible structure (overall 4 types) i know the type by the length of every field in the structure.
My task is:
1. Read the file into PI and transform to XML
2. Map the flat structure depending on the keyvalue to the deep structure
3. Transform several fields in the different structures like the requirement
4. Write back the file via FTP as the same flat structure as before
Do you have any approach to solve the item number 2 (the other steps are clear for me)?
Do i need several mapping-programs? If so, how can i determinate the right mapping-program, deping on the keyvalue?
Thanks in advance
Tobi

Here the inbound payload:
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_MULTI_TYPES xmlns:ns="namespace">
- <VORSATZ>
<ZSATA>0</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZLIEF>T</ZLIEF>
<START>20080905</START>
<ZFILL />
<ZENDE>E</ZENDE>
</VORSATZ>
- <KOPFSATZ>
<ZSATA>1</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<BUDAT>20080904</BUDAT>
<BLDAT>20080904</BLDAT>
<XBLNR />
<WAERS />
<HWAE2>EUR</HWAE2>
<HWAE3 />
<KURS2>000000000</KURS2>
<KURS3>000000000</KURS3>
<BKTXT />
<ZFILK />
<ZENDE>E</ZENDE>
</KOPFSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>001</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>30611102</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000057576</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>009</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000021070</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AA</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000009796</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4027V63RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <NACHSATZ>
<ZSATA>9</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZZSOL>000000000359502</ZZSOL>
<ZZHAB>000000000359502</ZZHAB>
<ZZBEL>0000001</ZZBEL>
<ZZPOS>000000010</ZZPOS>
<ZFILN />
<ZENDE>E</ZENDE>
</NACHSATZ>
- <VORSATZ>
<ZSATA>0</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZLIEF>T</ZLIEF>
<START>20080905</START>
<ZFILL />
<ZENDE>E</ZENDE>
</VORSATZ>
- <KOPFSATZ>
<ZSATA>1</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<BUDAT>20080904</BUDAT>
<BLDAT>20080904</BLDAT>
<XBLNR />
<WAERS />
<HWAE2>EUR</HWAE2>
<HWAE3 />
<KURS2>000000000</KURS2>
<KURS3>000000000</KURS3>
<BKTXT />
<ZFILK />
<ZENDE>E</ZENDE>
</KOPFSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>001</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>30611102</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000057576</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>009</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000021070</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AA</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000009796</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4027V63RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <NACHSATZ>
<ZSATA>9</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZZSOL>000000000359502</ZZSOL>
<ZZHAB>000000000359502</ZZHAB>
<ZZBEL>0000001</ZZBEL>
<ZZPOS>000000010</ZZPOS>
<ZFILN />
<ZENDE>E</ZENDE>
</NACHSATZ>
</ns:MT_MULTI_TYPES>
And here the outbound payload:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_MULTI_TYPES xmlns:ns0="namespace">
- <VORSATZ>
<ZSATA>0</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZLIEF>T</ZLIEF>
<START>20080905</START>
<ZFILL />
<ZENDE>E</ZENDE>
</VORSATZ>
- <VORSATZ>
<ZSATA>0</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZLIEF>T</ZLIEF>
<START>20080905</START>
<ZFILL />
<ZENDE>E</ZENDE>
</VORSATZ>
- <KOPFSATZ>
<ZSATA>1</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<BUDAT>20080904</BUDAT>
<BLDAT>20080904</BLDAT>
<XBLNR />
<WAERS />
<HWAE2>EUR</HWAE2>
<HWAE3 />
<KURS2>000000000</KURS2>
<KURS3>000000000</KURS3>
<BKTXT />
<ZFILK />
<ZENDE>E</ZENDE>
</KOPFSATZ>
- <KOPFSATZ>
<ZSATA>1</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<BUDAT>20080904</BUDAT>
<BLDAT>20080904</BLDAT>
<XBLNR />
<WAERS />
<HWAE2>EUR</HWAE2>
<HWAE3 />
<KURS2>000000000</KURS2>
<KURS3>000000000</KURS3>
<BKTXT />
<ZFILK />
<ZENDE>E</ZENDE>
</KOPFSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>001</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>30611102</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000057576</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>009</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000021070</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AA</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000009796</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4027V63RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>001</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>30611102</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000057576</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>009</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000021070</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AA</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000009796</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4027V63RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <NACHSATZ>
<ZSATA>9</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZZSOL>000000000359502</ZZSOL>
<ZZHAB>000000000359502</ZZHAB>
<ZZBEL>0000001</ZZBEL>
<ZZPOS>000000010</ZZPOS>
<ZFILN />
<ZENDE>E</ZENDE>
</NACHSATZ>
- <NACHSATZ>
<ZSATA>9</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZZSOL>000000000359502</ZZSOL>
<ZZHAB>000000000359502</ZZHAB>
<ZZBEL>0000001</ZZBEL>
<ZZPOS>000000010</ZZPOS>
<ZFILN />
<ZENDE>E</ZENDE>
</NACHSATZ>
</ns0:MT_MULTI_TYPES>

How can I map last of the repeating records into a single record?

I have a following input schema, I need to take only one of the <Student> records and map that to a single record in output. Doesn't matter if the first, second or last one of the records get mapped, I only need one in the output. Any idea how can
this be accomplished?
Input:
<Students>
<Student id="1">
<Name>
A
</Name>
<Roll>
1
</Roll>
</Student>
<Student id="2">
<Name>
A
</Name>
<Roll>
1
</Roll>
</Student>
<Student id="3">
<Name>
A
</Name>
<Roll>
1
</Roll>
</Student>
</Students>
Expected Output:
<Candidate>
<Student>
<Name>
A
</Name>
</Student>
</Candidate>

Sounds rather complex for something that could be done very simple in custom XSLT like this:
<?xml version="1.0" encoding="utf-16"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="Students">
<Candidate>
<Student>
<Name>
<xsl:value-of select="Student/Name" />
</Name>
</Student>
</Candidate>
</xsl:template>
</xsl:stylesheet>
Morten la Cour

How can I map the shutdown event?

Hi,
I need to map the shutdown event (when the app is finished due to turn off or restart the machine).
My code ...
ShutdownHook shutdownHook = new ShutdownHook(this);
Runtime.getRuntime().addShutdownHook(shutdownHook);
... works well !!
But if I use the Java Web Start to deploy, the shutdown event is not trigged.
Any idea to solve this problem?
Thanks,
Rufino

The top 5 events have the flowing event in my db,how can i eliminate it?1) once you have eliminated the top event;
2)you'll have a new top event that needs to be eliminated
3) go to #1
How do you know when to stop the infinite loop?
Handle:      user7244870
Status Level:      Newbie (5)
Registered:      Sep 28, 2010
Total Posts:      85
Total Questions:      31 (18 unresolved)
so many questions & so few answers.
Edited by: sb92075 on May 15, 2011 5:52 PM

How can I mapping directory by using Weblogic Server?

Hi,
We used to use iPlant as the web server. How can mapping directory using Weblogic
server?
$PATH=$wl_home/config/epdm/applications/DefaultWebApp/WEB-INF/classes
such as to map the following:
From To
/rok/servlet $PATH/servlet-dev/WEB-INF/classes
/rok/imagest $PATH/servlet-dev/images
/rok/html $PATH/servlet-dev/htm
/servlet $PATH/servlet-dev/servlet
Thanks!
Hanqing

Use JMX. See http://dima.dhs.org.
Peace,
Cameron Purdy
Tangosol, Inc.
Clustering Weblogic? You're either using Coherence, or you should be!
Download a Tangosol Coherence eval today at http://www.tangosol.com/
"Nicole" <[email protected]> wrote in message
news:3c4d6daa$[email protected]..
>
Hi all,
in my EJBs I want to know, on which server instance I´m running. I needthis for
logging info. How can I get the servers name?
When I load the JNDI tree and select java:comp, an error occurs and a lotof information
is printed. One is weblogic.Server and that is what I´m searching for.
I use WLS 6.1 SP1
Any ideas? Thanks,
Nicole

How can I map a drive to Azue file shares without user intervention or having a user logged on?

I have the file share created, and can manually map the drive. I have even created a batch file that will create the drive mapping. One step further, I used the following regedit to create the mapped drive:
Regedit:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
add new string value:
value name: MapS
value data: c:\azurefileshare.bat
I have a scheduled task running a batch file running the net use command, and the drive is available, and I can create/delete files, so access is not an issue.
All works fine if I log onto the server, however, what I am trying to accomplish, is to have that drive mapped upon reboot without having a user log on.   Checking the log file running the net use command when no one is logged on, I get the following:
Status       Local     Remote                    Network
Unavailable S:        path of file share
Microsoft Windows Network
The command completed successfully.
New connections will be remembered.
Is there a way to accomplish this? Thanks in advance.

Hello wdick,
Thank you for your response and getting back on this issue. I am sorry that the blog that I referred to was not available. I pretty much thought that you must be referring to the ‘File Services’ which is in preview yet. I recently had another user with a similar
question but currently, the users can access the files using only 'Interactive logon'. You can refer to this link:
http://social.msdn.microsoft.com/Forums/en-US/1f1fa9b5-a81d-4067-9d90-2c7c47667732/azure-file-services-authentication-without-prompt-passthrough?forum=windowsazuredata
Thanks.
Syed Irfan Hussain

How can i map a newly added column in DB via aqualogic

Hi,
My application runs on aqualogic,
Scenrio:
It takes data from a table from one database, Say A and after integration it pushes the same data into another table in different DB, say B.
Now I have added one new field in DB "A" and I have to insert that data of new field in a new DB "B".
Please lemme know how can i do this.
I have one xsd and ds file for both.
If i manually write the entry in in both xsd's and ds's , and compile then will it be working fine.
if not then whats the way to accomplish this task.
Please help

thanks michael,
However, i manually add that field in my destination DB sxd file [worke fine] but when i added the corresponding entry in ".ds" file and did "ant build" its throwing the following error -
[wlwBuild] [Build] </x:xds>] has been ignored. Error: error: Unexpected character encountered: 'x'.
[wlwBuild] [Build] May 15, 2007 10:18:12 PM com.bea.ld.wrappers.Annotation$1 giveWarning
[wlwBuild] [Build] WARNING: ANNOTATION WARNING: [ld:SamDataServices/DestDB/EIM_AGREEMENT.ds]: Unexpected pragma: [function <f:function xmlns:f="urn:annotations.ld.bea.com" nativeName="SAM_AGREE" nativeLevel2Container="DESTDB" style="table"/>] has been ignored. Was expecting one of pragmas: xds,xfl.
can you please temme what could be the reason and how to overcoem it.
PLUS:: i checked that this ds is a read only one ,, i checked out file ,, added entry manually .. removed read only tag .. and then again compiled ,,, again same error
Your help will highly appreciated.

How can we map s.o.p as a log file in weblogic9.2

how can we mapp System.out.println("object");
as a log in weblogic server for a particular path
like c:/bea/logs/soplogs/stdio.txt;plz tell me the configuration setting in weblogic 9.0 for this.

RTFM. However it's unlikely that you're going to get away with that.
Use a proper logging system.

How can i map this lot out?

I have this code below
How can get it to print out so that it will print out all the key values that are equal to cust, Then print out all the key values that are equal to details, then print out all the key values that are equal to item.
Thank you
loftty
                      String a = "firstname";            //column names
                    String b = "lastname";
                    String c = "id";
                    String d = "adress1";
                    String k = "phone";
                    String f = "county";
                    String g = "post code";
                    String h = "country";
                    String i = "goods in";
                    String j = "goods out";
                    String st1 = "cust";
                    String st2 = "cust"; //table names
                    String st3 = "details";
                    String st4 = "details";
                    String st5 = "item";
                    String st6 = "details";
                    String st7 = "item";
                    String st8 = "item";
                    String st9 = "item";
                    String st10 = "cust";
                         hash.put(a, st1);
                         hash.put(b, st2);
                         hash.put(c, st3);
                         hash.put(d, st4);
                         hash.put(k, st5);
                         hash.put(f, st6);
                         hash.put(g, st7);
                         hash.put(h, st8);
                         hash.put(i, st9);
                         hash.put(j, st10);

If you can sort by key and then insert into hashtable, then you just have to have one while loop and just print key and value...
This is one way of doing it.
Enumeration en = hash.elements();
while(en.hasMoreElements())
String key = (String)en.nextElement();
String value = (String)hash.get(key);
if(hash.containskey("cust")
System.out.println(key);
System.out.println(value);
Enumeration en2 = hash.elements();
while(en2.hasMoreElements())
String key = (String)en2.nextElement();
String value = (String)hash.get(key);
if(hash.containskey("detail")
System.out.println(key);
System.out.println(value);
Enumeration en3 = hash.elements();
while(en3.hasMoreElements())
String key = (String)en3.nextElement();
String value = (String)hash.get(key);
if(hash.containskey("item")
System.out.println(key);
System.out.println(value);
}

How can we map the same customer as vendor also

Hi,
For suppose we have a senario like where the same customer act as a Vendor. Then how do we map this senario..
Regards
sankar

Dear sankar
As already suggested, create the client as a customer in XD01 and save. Similarly, go to XK01 and create the same customer as vendor and save. Assign the respective customer code in vendor master and vendor code in customer master.
Wherever MM activities takes place like receiving bottles via MIGO, payment will made based on MIRO. Similarly, from SD side, whenever soft drinks is sold, the amount gets debited to that customer account.
Both these transactions are recorded in FBL5N.
Hope this is what your doubt is.
thanks
G. Lakshmipathi

How can I map SSH from an outside network range to an internal host (ASA 5505)

Cisco Adaptive Security Appliance Software Version 7.2(4)
Device Manager Version 5.2(4)
- External network range that needs SSH access: 8.8.8.0/24
- Outside interface: 10.1.10.2 (NAT'd from 7.7.7.7)
- Inside Network: 192.168.100.0/24
- Inside host to redirect external SSH to: 192.168.100.98
Hi All,
I have a Cisco ASA 5505 (version above) and I have someone that needs to SSH into a box behind the ASA. I'm having a few issues trying to configure this access-list and NAT. I've tried many combinations and clearly my IOS is not as good as I thought.
Can anyone help with this? What commands should I enter to accomplish mapping SSH from an outside network range to an internal host?
Many thanks,
Tarran

This may or may not work depending on how your modem handles the natting. On your firewall try this -
static (inside,outside) tcp interface 22 192.168.100.98 22
then add this to your acl on the outside interface of your ASA -
access-list outside_in permit tcp 8.8.8.0 255.255.255.0 host 10.1.10.2 eq 22
if you don't have an acl applied then add this extra step -
access-group outside_in in interface outside
Jon

How can I map multiple sourcelines of the same position into 1 targetline?

Hi all,
I have a mapping problem in XI. I have no idea how to do the following mapping in the IR. My inputfile contains of 1 headerline and mulitple positions, and it has got multiple lines per position (with different data in it). The targetfile has got 1 headerline and multiple positionslines in which I have to "merge" the data from mulitple source-positionlines. It looks like this:
source structure:
headerdata
position1 part1 (posnr, article number, quantity, articletype,...)
position1 part2 (posnr, article price, payment conditions,...)
position1 part3 (posnr, route,...)
position2 part1
etc
target-structure:
headerdata
position1 (posnr, articlenr, quantity, articletype,price, payment conditions, route)
position2 (same)
position3 (same)
etc
Now I have to map part1,2 and 3 of the source structure to the 1 and the same target-line. I guess I would need some kind of lookup of the positionnumber in my message-mapping. But how do I do this? Copying the targetline 3 times is not an option as the target-utility only accepts the structure as described above....
Hope anybody van help
Thanks,
William

Hi,
U can do it with UDF but it is more simpler with normal graphical mapping refer the following steps.
1) To map header node for your example (position1) refer the following steps,
posnr --> RemoveContext --> sort --> splitByValue(valueChange) --> CollapseContext --> position1
2) for posnr in target side also u can use same mapping with some change i.e.
posnr --> RemoveContext --> sort --> splitByValue(valueChange) --> CollapseContext > splitByValue(EachValue)>posnr.
3) For other node like articlenr, quantity, articletype,price, payment conditions, route refer the following mapping.
1st do this.
posnr --> RemoveContext --> sort --> splitByValue(valueChange) --> CollapseContext --> splitByValue(EachValue).
then take IfWithOutElse function give 1st input as output of CollapseContext
2nd input is value like articlenr, quantity, articletype,price, payment conditions or route(one of it) --> FormatByExample(using posnr --> RemoveContext --> sort --> splitByValue(valueChange)) node
Output of IfWithOutElse give to splitByValue(EachValue)
Then give it to Target field.
Regards,
Rohit.
reward points if helpful

How can i map?

Similar Messages

Maybe you are looking for