How can I mirror two directories between two machines?

Hi,
I have two systems 192.168.1.2 and 192.168.1.20. How can mirror 192.168.1.2:/opt/feed/spuk directory with 192.168.1.20:/opt/feed/spuk directory.
Could u please give required steps please?
Regards,
GanPan.

The best way is via NFS. Have one of the hosts be an NFS server, which actually hosts (and exports) the directory of interest on the system. The second machine should mount that directory being exported by the server.
The man page: mount_nfs(1M) is a good place to start.

Similar Messages

  • How can i set the space between two button?

    Hello,
    I have
    <mx:HBox>
    <mx:Button label="one" />
    <mx:Button label="two" />
    </mx:HBox>
    how can i set the distance between this two compotents?
    Thanks

    quote:
    Originally posted by:
    robinbouc77
    Hi,
    you can use horizontalGap property on HBox to change the
    space between your buttons. I think the default value is 6. You can
    also use <mx:Spacer/>, but changing the gap on HBox is
    probably the cleanest way ;)
    C U
    perfect!!! works fine

  • Using `n how can i add two empty line (two carriage return), between these two lines in the output file?

    hi friends
    using `n   how can i add two empty line (two carriage return), between these two lines in the output file?
    PS C:\> $env:COMPUTERNAME | add-content c:\file.txt
    PS C:\> $Env:USERDOMAIN  | add-content c:\file.txt
     i tested "$env:computername`n`n`n$env:userdomain" | add-content c:\file.txt   but it results in 
    myPCMyDomain
    but i wanted the contents of the output file be like this:
    MyPC
    #empty line here 
    #empty line here
    MyDomain
     i tested many other forms but didn't work.
    thanks

    I tried it, as well. The line breaks were respected in the PowerShell console, Programmer's Notepad, and Word; they weren't in Notepad.
    You are using a Unicode file.  Locale is what?
    If you just want notepad compatible line breaks then do this:
    del file.txt ; "$env:computername`r`n`r`n`r`n$env:userdomain" | add-content file.txt ;notepad file.txt
    Look in hex to see that `n is ^L or 0xA and is only one character.  CrLf is 0xD 0xA - two characters.
    My programmers editors and VS all understand a single ^L as a line break so does PowerShell.  Only DOS/Notepad and other utilitis don't understand this..
    ¯\_(ツ)_/¯

  • How can i compute the distance between every two strias

    how can i compute the distance between every two strias?The distances between every two strias in an image are almost equal .I have a picture for you in the accessory.there are many trias in all kinds of orientation in an image.fistly,i should find the most consious area,because it is simple to compute . Secondly,To improve precision,i should compute the distance of a group of trias,then conpute its average value.i dont know how to compute .pls teach me,thanks very much!
    Attachments:
    11.jpg ‏12 KB

    there is a typical image.
    Attachments:
    21.jpg ‏23 KB

  • How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

    How To Using Two Different Public IP Address on My DMZ with ASA 5520
    Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
    Hi everyone out there.
    can any one please help me regarding this situation that im looking for a solution
    My old range of public ip address are finished, i mean (the 41.x.x.0 range)
    So now i still need to have in my DMZ another two servers that will bring some new services.
    Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
    So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
    ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
    So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
    on Cisco ASA 5520 v8??
    How my configuration should look like?
    I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
    Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
    attached is my network diagram for a better understanding
    I thank every body in advance
    Jorge

    Hi,
    So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
    Now you have gotten a new public IP address range from the ISP and want to get it into use.
    How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
    To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
    So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
    Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
    Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
    Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
    Of the above ways
    The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
    The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
    Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
    I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
    - Jouni

  • In ER DIagram using toad( how can i link two tables)

    Hi,
    Any Toad expert can guide me that how can i link two tables in Toad in ER Diagram to show the relationship between two tables.
    Thanks

    Hi,
    I hope there is foreign key relationship in tables, if so then you can click on "Find table dependencies" icon which will draw lines between them.
    ~Vinod

  • How can I open two application together ? Ex. Calendar and reminders ?

    How can I open two application together ? Ex. Calendar and reminders ?

    When you are in one app, press the home button and open another app. You can't see more than one app at a time, but you can have as many open as memory will allow.
    To quickly switch between the apps, double-click the home button. Active apps will be shown in the order you last used them. You can slide the active bar to see more of recent apps.

  • How can I have two itunes accounts on one computer?

    How can I have two itunes accounts on one computer?

    Not sure what you mean.
    An account is a user name and password.
    Sign into whichever account you want to use for purchasing.
    Authorize the computer for both account to listen to the content.

  • How can I combine two itunes accounts into one?

    How can I combine two itunes accounts into one?

    Items purchased from the iTunes Store are permanently associated with the account from which they were originally purchased.  Apple provides no way to change this.
    However, if you wish to put content from two accounts into a single iTunes library, you can easily do so.  Use the command File > Add File (or Folder) to Library.

  • How can I share two differents Itunes accounts in my Apple TV ? I have one and my wife has another account and we want to share both in our apple tv. How can I do this ???

    How can I share two differents Itunes accounts in my Apple TV ? I have one and my wife has another account and we want to share both in our apple tv. How can I do this ???

    I assume you have different iTunes collections on different PC's, or on different logins on the same PC?  If that's the case then just enable "Home Sharing" in each iTunes using the SAME iTunes username and password as you enabled home sharing on the Apple TV with. The account used for home sharing is NOT the same as the account used to access the iTunes store, so as long as you use the same account (pick one, doesn't matter which) then you should see both of yor iTunes libraries on the Apple TV. Note - each iTunes has ti be running in order for the Apple TV to see the library.
    Here's some details on how to do it:
    http://support.apple.com/kb/HT4363

  • How can we have two different Itunes libraries on one computer?

    How can we have two Itunes accounts on one computer?  I found info on the itunes help page but I do not know how to follow the steps given because I am not prompted with what it says I should be prompted with? Please help I don't want to delete one of our libraries

    Launch iTunes with the Shift key held down as needed, or use different Windows XP user accounts.
    (74282)

  • How can I use two displays with my Mac Mini?

    How can I connect two displays to my Mac Mini (newest generation with one thunderbold and one hdmi)?

    Have you tried connecting one to the HDMI output, and another to the Thunderbolt port (with the appropriate Mini DisplayPort-to-other connection adapter as needed)?

  • HT1660 How can I maintain two separate itunes accounts on one single device without erasing either set of data?

    How can I maintain two separate itunes accounts on one single device (iPhone 4) without erasing either set of data when syncing with itunes?

    Hi,
    Depends on what you trying to setup but for purchases, you can roll down at the very end of the iTunes/AppStore pages to logout of your current account and then login into a different one.  Then your purchase will be billded to this new account.  Everything will sync as you used to but in order to use the purchased content in iTunes or other devices, you will need to authorize them (you can have up to 5 devices authorized for an account).

  • HT204053 How can I sync two different email accounts?

    How can I sync two different email accounts? All of this Mobile Me and cloud stuff got me all flustered and now I have two accounts possibly 3.

    How to use multiple iPods, iPads, or iPhones with one computer

  • How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?

    hello,
    How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?
    thanks,
    Jay

    Hi,
    I understand that it applied first logo to all other sub sites.
    Please make sure that you change the logos in the subsites.
    If we change the logo in the root site, the logos in the subsites will be changed at the same time.
    However, we can change the logo in the subsites separately.
    We can go to a subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo->select a picture, then it will has a different logo than the root site.
    Then go to the other subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo-> select another picture, then it will has a different logo that the first subsite.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

Maybe you are looking for