How can I mute my video I import to imovie? I only want music in my video

I'd like to mute the video I import to imovie...how can I do this? I only want the music to be audible - too much of my voice on the video with my kids and think it's distracting!

Double click on the clip to bring up inspector click on audio. Bring clip audio to zero or what ever percent you want to lower it too
Or you can select all clips and click on the blue inspector and you can change all at once.

Similar Messages

  • How can I unprotect my original movie edited in imovie?

    How can I unprotect my original movie edited in imovie? I want to post it on Teacher Tube and it will not upload protected movies.

    in german input, the key "Y" and "Z" are opposite comparing with normal english keyboard. and in chinese input method, the "y" and "z" are mapped just as normal english keyboard.
    what happens now is, in ITABC input method, "y" and "z" are mapped as normal english keyboard, which is not like that before when i was using tiger.
    Thanks for the info! You should definitely ask about this on the Chinese-Mac list. Keyboard mapping with the Apple Chinese IM's has long been a problem, and is one reason many people are moving to QIM:
    http://www.yale.edu/chinesemac/pages/input_methods.html#other
    I suspect something has changed in the Chinese IM with Leopard to mess this up for you, and it may not be fixable.

  • I imported a 17' MiniDV piece into iMovie and it's lost synch. How can that be? I have done no editing, I just want to make it into a DVD.

    imported a 17' MiniDV piece into iMovie and it's lost synch. How can that be? I have done no editing, I just want to make it into a DVD.

    Hi
    Do You mean miniDV tape (interlaced video PAL or NTSC) ?
    If so - iMovie'08 or 09 or 11 - are not tools of Choise if You want a DVD as result - They all discards every second line resulting in less quality.
    Sync. Problem - If miniDV tape - How was it recorded -
    Audio mode - Is Camera set to record in 12-bit 32kHz - Should be 16-bit 48kHz
    Recording mode - SP (60 min on a 60 min tape) or LP (90 min on 60 min tape)
    If LP-mode - Then You need - Same Camera as recorded - tolerances is to small even for a Camera of same brand and type to play-back.
    I would use FinalCut Express and a setting of PAL/N TSC and 32kHz audio if Camera is set to record in 12-bit
    If LP-mode - iMovie HD6 is more tolerant in Captuing than FinalCut and Imediatly after Import/Capture - Extract Audio
    And set iM HD6 to NOT IMPORT AS INDIVIDUAL Clips - to many drop outs to work.
    Yours Wildly Guessing Bengt W

  • How can I export a slideshow from iPhoto to iMovie 09.  I try but it only lets me import 211 out of the 311 photos I have in the slideshow.

    How can I export a slideshow from iPhoto to iMovie 09.  I try, but it only exports 211 out of the 311 photos I have in the slideshow I made on iPhoto.

    how do i change the format to the right one?
    Before you can decide what to do, you have to know what you are starting with. Sony MPEG-1 files would be converted one way while DivX or WMV files would likely be handled in another. Extraneous tracks can be removed directly with QT Pro but if you don't have QT Pro then there may or may not be other work around possibilities depending on the specific audio and video compression formats in use. The best place to start would normally be to double-clic the source file in iPhoto to open it in the QT Player. When it opens in the QT Player, check the "Inspector" window to see what it says on the "Format:" lines. This will tell you the type of audio and video content you are dealing with here. Then come and tell us so we can offer some specific conversion solutions.

  • How can you mute the vocal from a stereo music on garageband 10.0.2

    I need to know ASAP please

    _VanCity_ wrote:
    How can you mute the vocal from a stereo music on garageband 10.0.2
    http://www.bulletsandbones.com/GB/GBFAQ.html#removevocals
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How can I mute the built in mic.

    Can't find an answer to this in the forum so here goes.
    How can I mute the build in mic? Playing music through quicktime or iTunes on a MacBook Pro and I'm picking up sound through the mic which is irritating to say the least.
    (Why on earth we couldn't have two audio ports on this machine is beyond me......)

    Go to System Preferences on that click sound icon select input chose which mic you want

  • How can I increase the speed of importing audio cds into my iTunes library?  On my old Dell PC cds imported at 30-35x, but my new iMac (using the Apple Superdrive) is trudging along at 8-10x.  Any suggestions?

    How can I increase the speed of importing audio cds into my iTunes library?  On my old Dell PC cds imported at 30-35x, but my new iMac (using the Apple Superdrive) is trudging along at 8-10x.  Any suggestions?

    Hi,
    Not sure you can do anything about this. I get vaiable import speeds - a lot depends on the actual disc. The Read Write spec is 24X but I rarely see speeds close to this.
    Jim

  • How can I mute a facetime call?

    I'm using an iPad 4 running iOS 7.1.2.
    How can I mute the sound from the caller on facetime?  I can mute my microphone so they can't hear me, but I can't mute the sound coming from their side.
    In order to do this, I have to ask them to mute their microphone.
    This is very annoying.  Sometimes, I need to monitor the other caller visually but do not need the sounds from their environment pouring out of my iPad speakers.  My sound level will go down to 1 bar but will not mute.
    As soon as facetime is off, my iPad will mute (clicking the volume buttons on the side).  If I facetime again, with my iPad on mute, it automatically comes off mute and the lowest the sound will go down to is 1 bar.
    Is this by design or is it a fault?

    Hi

  • I've made a video about 3 minutes long but when i try to download it youtube it fails (-error 108) how can i fix it? convert? downsize? helppppp, i want to make full hd videos longer than 3 minutes long.

    I've made a video about 3 minutes long but when i try to download it youtube it fails (-error 108) how can i fix it? convert? downsize? helppppp, i want to make full hd videos longer than 3 minutes long. i manged to upload a short 1:43 min video to youtube but the quility was poor compared to the camera a was using wich was hd?

    I've made a video about 3 minutes long but when i try to download it youtube it fails (-error 108) how can i fix it? convert? downsize? helppppp, i want to make full hd videos longer than 3 minutes long. i manged to upload a short 1:43 min video to youtube but the quility was poor compared to the camera a was using wich was hd?

  • Why does FireFox truncate part of an E-mail of more than one page when I try to print it out? How can I sent an E-mail blaet to several but only show one name o

    When I try to print out an E-mail that is longer than one page, part of the 2nd page is truncated. I then have to go to Safari to print out the entire E-mail without part of it being truncated.
    When I have multiple E-mail addresses on a single E-mail, how can I send the E-mail so that each recipient only sees his/her name and E-mail address rather than everyone else that the E-mail is addressed to?
    Please advise.
    Thank you.
    Bill Leete

    Some style rules that Firefox handles well on the screen can cause this problem. Many email sites have a print button which simplifies the message format and removes navigation elements, etc., and Firefox generally handles print-formatted pages better. If your email site doesn't have print-formatted pages or those do not print, a "hack" is to select the text you want to print and then choose the Selection option in the print dialog.
    To hide email addresses from recipients, you need to place them in the BCC field. What do you put in the TO field in that case? You can use your own address.

  • If I have an IPhone and my mother has an IPod, how can we share an iTunes account on a Mac without sharing the music?

    If I have an IPhone and my mother has an IPod, how can we share an iTunes account on a Mac without sharing the music?

    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • HT1399 How can I stop my MacBook's iTunes from asking if I want to delete tracks each time I press to play one?

    How can I stop my MacBook's iTunes from asking if I want to delete tracks each time I press to play one? Is it a bug from iTunes's version 11.0.5?
    Since I dowloaded and installed iTunes' version 11.0.5 on my MacBook, it is behaving strangely:
    - displaying an alert message asing if I want to delete tracks each time I press to play one
    - not playing tracks in the order they're displayed in my library, sometimes jumping from one playlist to the other
    I did check my settings and preferences for playing tracks and tried changing some parameters in them, however it still doesn't help.
    It seems to be a bug in iTunes' version 11.0.5 — if you had a similar experience and found how to solve this discomfort, thanks for contacting me.

    Oui, je parle français. En fait, il semble qu'Apple ait résolu le problème auquel j'étais confronté car ce problème a disparu suite à la mise à jour logicielle d'après (désormais sous Mavericks).
    (It seems Apple solved the problem I was facing since this problem disappeared after I updated my software to/under Mavericks).

  • How can I set up my Mac for two users to share photos, music etc

    How can I set up my Mac for two users to share photos, music etc?

    On the Mac with the libraries you want to share:
    iTunes Preferences click on the Sharing tab and put a tick in 'Share by library on local network'.
    iPhoto Preferences click on Sharing and put a tick against 'Share my photos'.
    When launching the same apps on other Macs on the network the libraries should be available, listed on the left.

  • How can I use iTunes on my new computer, without lossing all my music?

    How can I use iTunes on my new computer, without losing all my music?
    I don't want to rebuy everything I have purchased over the years.
    Your help would be greatly appreciated.

    They should be in your itunes media folder. Use an external hard drive and just copy that to your new computer. I'm sure there's an easier way like this one (iTunes>File>Library>Export Library>External Hard Drive) but I never tried it before. Anyways, once that's done, just simply authorize your itunes account to play music you bought on to the new computer.

  • I have an old 4GB Ipod nano and an I-Phone 4S. I only want music to sync to my I-Pod without all the apps from the phone. Can someone tell me how to do this please?

    I'm updating the music in my I-Tunes. I have an old 4GB Nano but I also have an I-Phone 4S. I only want music and nothin else on my I-Pod, how can I get it to sync without all the apps as, obviously the I-pod doesn't have enough memory?

    "Other" is data that the iPod doesn't know how to deal with (but on your nano, it isn't Apps). All iPods have some quantity of "Other" on them. Sometimes Other is corrupt files that cannot be read.
    The usual remedy when the quantity of Other becomes too big, is to Restore the iPod. However, 0.26GB of Other doesn't appear to be very much and I suspect you won't see much change, if any, if you Restore.

Maybe you are looking for