Why does FireFox truncate part of an E-mail of more than one page when I try to print it out? How can I sent an E-mail blaet to several but only show one name o

When I try to print out an E-mail that is longer than one page, part of the 2nd page is truncated. I then have to go to Safari to print out the entire E-mail without part of it being truncated.
When I have multiple E-mail addresses on a single E-mail, how can I send the E-mail so that each recipient only sees his/her name and E-mail address rather than everyone else that the E-mail is addressed to?
Please advise.
Thank you.
Bill Leete

Some style rules that Firefox handles well on the screen can cause this problem. Many email sites have a print button which simplifies the message format and removes navigation elements, etc., and Firefox generally handles print-formatted pages better. If your email site doesn't have print-formatted pages or those do not print, a "hack" is to select the text you want to print and then choose the Selection option in the print dialog.
To hide email addresses from recipients, you need to place them in the BCC field. What do you put in the TO field in that case? You can use your own address.

Similar Messages

  • My Firefox home page displays a weather icon for New York , how can I change it for my own location? It only shows for USA

    At the bottom of the screen there are several icons for weather forcasts ect. for New York. How can I channge these icons to show the forecast for my own location? When I try to change location all I can get are locations for the USA

    What web page do you have set as your homepage?

  • Why does Firefox impose Google as a search engine in it's home page?

    Why does Firefox impose Google as a search engine in it's home page?

    I've found Firefox to be very unstable when it comes to choosing a different home page & search engine, frequently ignoring my choices & reverting to the default settings between launches. This also applies to Google & the choice of language if it's different to that of the country the person's in, which is my main gripe with Google, it doesn't detect the language of the operating system but that of the geographical location, forcing one to alter the settings every time, which is extremely annoying! Please do something about all this if possible, thanks.

  • Why does firefox (updated) on windows 7 NOT send a hotllink (must copy/paste),when using the 'send link' feature,whereas firefox on XP always sends a hotlink?

    Question
    why does firefox (updated) on windows 7 NOT send a hotllink (must copy/paste),when using the 'send link' feature,whereas firefox on XP always sends a hotlink? This feature has always worked perfectly on all my windows XP computers,but not at all on any of my versions of firefox on windows 7.How can i fix this? Why does it not work?

    Hi,
    Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]. You can also attach a screenshot on this page below '''Post a Reply''' > '''Add images: Browse ...'''

  • How do I send pictures from iphoto to a group via email instead of to just one individual? I can't type in more than one name or send the pictures to a group.

    How do I send pictures from iphoto to a group via email instead of to just one individual? I can't type in more than one name or send the pictures to a group.

    I had a similar problem in that my wife's iphone 5 could not send pics with imessage.  Had to set the settings to default to SMS or whatever.  After laboring many hours on the web I coincidentally was on the phone with the internet people to question my internet speed.  They changed the router channel, which is something that I am capable of doing myself.  After that, the pics go over imessage.  My own Iphone didn't have the problem.  We are both latest IOS 7.0.6.

  • Sending more than one name value pair via ajaxRequest.add()

    Hi all,
    I'm implementing AJAX in Oracle Application Express to perform DML operations on a table. I need to send more than one name value pair via the ajaxRequest object. Can someone guide me how to achieve this? Say for example i need to send 2 values(need to send 2 form elements when submit button is clicked) P3_region and P3_scope. i tried the following methods.
    Method 1:
    ======
    ajaxRequest.add('P3_region',document.getElementById('P3_region').value);
    ajaxRequest.add('P3_scope',document.getElementById('P3_scope').value);
    Method 2:
    ======
    ajaxRequest.add('P3_region',document.getElementById('P3_region').value,'P3_scope',document.getElementById('P3_scope').value);
    Neither of them is fruitful. Can someone guide me how to achieve this?
    Regards,
    Balaji Radhakrishnan.

    Hi Roel,
    The javascript goes like this.
    <script language="JavaScript" type="text/javascript">
    function getElement1()
    document.getElementById('P3_Element1').value = '';
    var ajaxRequest = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=Element1Process',0);
    ajaxRequest.add('P3_Element2',document.getElementById('P3_Element2').value);
    ajaxRequest.add('P3_Element3',document.getElementById('P3_Element3').value);
    ajaxRequest.add('P3_Element4',document.getElementById('P3_Element4').value);
    ajaxRequest.add('P3_Element5',document.getElementById('P3_Element5').value);
    ajaxRequest.add('P3_Element6',document.getElementById('P3_Element6').value);
    ajaxResult = ajaxRequest.get();
    if(ajaxResult)
    var wsArray = ajaxResult.split("~");
    document.getElementById('P3_Element1').value = wsArray[0];
    </script>
    The application Process goes like this..
    declare
    v_Element1 VARCHAR2(60);
    begin
    select distinct Element1 into v_Element1 from TableA where Element2=:P3_Element2 AND Element3=:P3_Element3 AND Element4=:P3_Element4 AND Element5=:P3_Element5 AND Element6=:P3_Element6;
    htp.prn(v_Element1);
    exception
    when others then
    v_Element1 := 'Invalid Header Combination';
    htp.prn(v_Element1);
    end;
    The requirement goes like this..
    When i give Element2, Element3,Element4,Element5,Element6 as input in the form page the Element1 should get displayed automatically without refreshing the page. But when i use the above javascript and application process i get the Element1 loaded with some html scripts. I call the javascript using onChange() function.
    Regards,
    Balaji Radhakrishnan.

  • Why does firefox switch back to bookmarks after I am on a web page ?

    This happens every time I go from selecting a bookmark to that page. It just annoying enough for me to yank my hair out, if i had any. Thanks, Max

    I have two antivirus programs on my computer. The default windows thing and MalwareBytes (which I perform a full scan with everyday) and I still have the problem.
    Hate to be a "problem child" but could anyone post an answer to this problem that isn't something that is obvious that should be done like resetting firefox or check for a virus or mess with the tabs options which I have tried every combination of the options that could be tried.
    I mean does anyone else anywhere have this same problem? What I don't understand is that I posted this question two days ago and it doesn't look like anyone else has asked for help with this same issue.
    What I really don't understand is why I can't find out anything doing an internet search using "why does Firefox keep returning to the webpage i am currently on when i open a new webpage" and so far no one has suggested something I have already tried.
    If Mozilla had some kind of phone number or email contact info then I could probably get this whole thing solved!!!!!!!!!!!!!!!!!!!!!!!!

  • Why won't my Time Capsule allow me to connect more than one device to the network at a time?

    Ok here is the shortest story I can come up with...
    Several months ago lightening struck my house and ruined the power cord for my old AIR PORT EXTREME....after replacing the power cable my wireless network began to prohibit more than one device at a time to connect to the wireless network.
    I replaced that network with a new TIME CAPSULE and it is doing the same thing.  I took my old AirPort Extreme to my work and it works like a charm.  My ISP says it is an Apple problem but I have had the same settings both at home and at work.  Work is great, multiple devices connect but home is one at a time and in order to connect ANOTHER device I have to power down one, and reboot the router and fire up the device I wish to connect.
    Any suggestions?

    I am running off a Fiber line....the unit that is a battery back up and appears to be a modem as well is called CyberPower CS24U12V-NA3
    Techincally, there is no "router" in my house, there is a LOCKED control box outside, a battery back up module in the garage that shows battery life and connection, then a cat5 outlet in my laundry room..All of which was installed by my ISP.
    I am using a 2TB Time Capsule running DHCP in Bridge Mode.  I can't find the software version but updated it while installing it within the last two months.
    Under Network Tab
    Enable NAT Port mapping is checked
    Under the Wireless Tab
    we have a 5ghz Network
    Radio mode is set to:  802.11a/n-802.11b/g/n (Automatic)
    2.4 GHz is Auto
    5 Ghz is Auto
    I hope this helps....

  • Does File Delivery support files to be stored in more than one format?

    Hi All,
    Can we have internal delivery channel configured to store files in more than one format.
    For eg. We want the files to be stored simultaneously in both xml and txt format as per requirement. Is this possible in Oracle 10g B2B.

    No, it won't be possible. At a time only one file would be written.
    You may write a utility which may poll the incoming directory (where Oracle B2B puts the file) and write messages in required formats in required directories.
    Regards,
    Anuj

  • Does my Adobe cc subscription let me install on more than one computer?

    I have had a subscription to Adobe CC since January of 2014. Do I have license to use it on more than one device?

    You install the same way you did originally.  Download/install the CC manager, sign in, install the applications.
    Creative Cloud Help / Creative Cloud for desktop
    https://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
    Creative Cloud Help / Sign out, Sign in | Creative Cloud desktop app
    http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    Creative Cloud Help / Install, update, or uninstall apps
    http://helpx.adobe.com/creative-cloud/help/install-apps.html
    Installing Creative Cloud Apps
    http://tv.adobe.com/watch/cs6-creative-cloud-feature-tour-for-video/installing-desktop-app s-from-creative-cloud/

  • Why does the "A" button go inactive when I highlight more than one name to start a group chat?

    I can't consistently start a group chat!  Help!  Sometimes it works, and sometimes it doesn't.

    Hi,
    AIM, Jabber, MSN (Windows Live), and Yahoo are the major IM services.
    AIM, MSN and Yahoo operate through their own Central server where you have to Login with a Name that is valid with that server.
    Jabber is a collection of Public and private servers which then are linked together via what is called Federation.
    AIM issue (or allow you to register) names directly and through several agreements with ISP and other services.
    Apple has one of these Agreements and Names Ending in @Mac.com and the MobileMe @Me.com names are Valid AIM Screen Names.
    AIM Names themselves tend to be just plain names where as others are or look like emails.
    Anyone of these three Names would be considered to be an "AIM" Buddy list in iChat as it logs in to the AIM Server.
    Google run the GoogleTalk service to allow Chats through their Web Mail Page.
    This is a Jabber server.
    Facebook seem to run a similar type of service.
    People and organisations that run Jabber servers can elect to run what are called Transports as well.
    These allow links to the other major services.
    An AIM transport would allow them to Add AIM buddies to their List and so on.
    iChat can also log in to Jabber servers including the GoogleTalk one
    The AIM App for PCs which is up to version 7.2.something can also allow people to Add their Facebook and Google Buddies  (sort of Reverse Transport if you like).
    I haven't downloaded the latest AIM for Mac version to see if it does the same.
    The short answer then is that all the major players are beginning to allow the adding of Buddies from other services.
    This is further complicated or involved, in that the major Social sites are also allowing people to link various Buddy lists in to one overall list.
    This tend to mean that if you link Facebook with Google Buddies and AIM Buddies there appears to be some sort of "Feedback" that allows those names to then appear in your AIM Buddy list.
    It does seem to somewhat fall down when you try and do Group Chats due to the different ways the major services conduct these chats.
    8:14 PM      Thursday; July 7, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Why does firefox 16.0.1 not allow me to click on buttons in the top 40mm below the banners, though i can get to them by tabbing to a buttons then press "Enter"?

    It doesn't matter what web-page I'm on, the top 40mm or so of the screen is a dead area for clicking on buttons or links. e.g. in Google I can click on a link lower down the page and get transferred to the new article - but if I were to move the item up nearer the top of the page the link would no longer operate.
    I can move to a link by repeated operation of the "Tab" key until the link or button is indicated, and then press "Enter" to use the link, but this is potentially very time-consuming if there are a lot of links on the page.
    I'm using a Toshiba Satellite L750 loaded with Windows 7, and Firefox 16.0.

    Problems with buttons and links at the top of the page not working can be caused by an extension like the Yahoo! Toolbar or a Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode

  • More than one name with the same email

    Hello there!
    I have an account with skype that i use frequently and once i forgot my password and got the link on my email. when i tried to log in and change password i found out that i have three names and i don't want them all, so how can i delete the other two??
    please i need a solution about it

    lenitaduplessis wrote:
    Hi, I have the same problem. Can you tell me who helped you to deleted the skype names you did not want?
    Thanks
    Lenita
    if your concern is the same or similar as the one mentioned by the thread starter, then the link provided above your post may also help you.
    CONTACT SKYPE CUSTOMER SERVICE   |  HOW TO RECORD SKYPE VIDEO CALLS  | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES   |  WINDOWS PROBLEMS TROUBLESHOOTING   |  SKYPE DOWNLOAD LINKS  
    MORE TIPS, TRICKS AND UPDATES AT
    skypefordummies.blogspot.com

  • Just bought my new macbook air, i noticed that my version is os x 10.9 (btw its 2013 model). how can i upgrade it to the latest version? it only shows apps such as numbers etc on the software update on app store

    just bought my new macbook air, i noticed that my version is os x 10.9 (btw its 2013 model). how can i upgrade it to the latest version?(to 10.9.2 or 3?) it only shows apps such as numbers etc... of the software update on app store.

    Here is a link to download 10.9.3 Update (Combo) manually:
    http://support.apple.com/kb/DL1746.

  • How can I force that in af inputFile,File Upload popup only show image file

    Hi
    jdev 11.1.1.5
    Is there any way to force that when click the browse button in af:inputFile ,In InputFile popup only show folder and image type file?
    Thanks

    There is no filter feature available for fileUpload. You can't force the component to only show specific files.
    Timo

Maybe you are looking for