How can i pass the name of the file polled by the file adapter to next step

Hi XI guru's ,
How can i pass the name of the file polled by the file adapter to next step in a BPM..?
regards,

Use Adapter-Specific Message Attributes and map that value in udf to the BPM message.
Also see this
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
Regards,
Prateek

Similar Messages

How can i get procedule name in a package if knowing the line num?

There is package and serveral procedules in it. How can i get a procedule name if i know the line num? Thx a lot

# Works in most of cases where the procedure is the first word [optionally starting with blanks or spaces ]
# However there may be cases like /* My PROCEDURE */ PROCEDURE <proc_name> IS where below wont work
WITH GET_PROCEDURE_NAME AS
SELECT owner,NAME, line, text
FROM   dba_source
WHERE NAME = '&pkg_name'
AND    TYPE = 'PACKAGE BODY'
AND    upper(ltrim(text)) LIKE 'PROCEDURE %'
AND    line <= &line_no
ORDER BY line DESC
SELECT *
FROM GET_PROCEDURE_NAME
WHERE ROWNUM = 1

How can I set a name for a unknown place without moving it?

I imported some photos with GPS information into iPhoto. I can see these photos on the map with one pin per photo, but every pin is tagged with "unknown place". All the photographs were taken on the same island, so I want to add the name of this Island to all pins.
When I enter the name of the place, iPhoto doesn't know it (it seems like the built-in database is very small), so I have to go to the Google view. There I find the Island and can create a new place, but when I confirm it all photos will move to one pin which was defined in google - the original location is lost (and there is no undo function!!!).
Questions:
1. How can I assign a name to a pin without moving the pin?
2. How can I restore the original place stored in the exif-information of the file?
Thanks a lot,
Jürgen

Thanks for your answer, after playing around another while I understand that using GPS-data or Places are two things which cannot be used together in a reasonable way.
Either I use the GPS pins, then they are at the right place, but then I just have the pins on the map without any names or grouping information.
Or I create places - I can create one place per photo, but then I would have to manage around 10.000 places in a simple list view. So if I go on a city trip and take 100 photographs with GPS, then I either have to create 100 places, just to see the name of the city above the pin, or i have to group them to one single pin in the middle of the city. I think both doesn't make sense.
Let's hope there are some improvements in upcoming versions.
BTW: To go back to the original GPS-location is very easy. Just remove the assigned place by clicking on the 'x', then the GPS-location is used again immediately.
Jürgen

How can i pass OCP 10G?

i passed 1z0-042 exam.
i wanna pass 1z0-043 or ocp 10G.
tell me, how can i pass this exam?

Fahd is right. The art of practicing can only make one pass in exams like this. Problems are now becoming scenarios based, so unless you are familiar with the scenarios, its difficult to pass these exams. Read the book and practice. You are done.

How can i pass a variable instead of a table name in the Select statement.

Dear all
how can i pass a variable instead of a table name in a select statement ?
Example :-
Begin
P_get_procedure_tname (aap_name,otable_name);--It will take an application name and will return a table name
Select col1 into ocol1
from ---- here i want to pass the variable OTABLE_NAME
End;How can i pass this ?

Hi,
You can use dynamic sql.
EXECUTE IMMEDIATE 'SELECT COL1 INTO ' || OCOL1 || ' FROM " || OTABLE_NAME;
{code}
cheers
VT

How can I pass the value to another frame?

Hi all,
The following is part of my coding of a frame. Once i click on the jButton2, the selected value will be stored into a variable named NAME and the value will be displayed by a label in same frame. At the same time, a new frame named TESTING3 will be set to visible.
private void jButton2ActionPerformed(java.awt.event.ActionEvent evt)
// TODO add your handling code here:
    String name = (String)jList1.getSelectedValue();
    jLabel1.setText(name);       //display the value in a label in same frame
    new testing3().setVisible(true);     //a new frame set to visible
}      Question: How can I pass the value to TESTING3 frame and display it on that frame?
Thanks,
ning.

just make an archive that save that variable and them get them from de clase were you save it
public class sav {
String n;
public sav {
n="";
public void addn(String x){
n=x;
public String shown(){
return n;
and them save it from the frame
sav sun = new sav();
sav.addn(f);
them call it from the other frame
sav sin = new sav();
String s = sin.shown();
label.setText(s);
and i think thats you want to do if its not please explain me better
bye

How can i pass the value one from to another form?

hi all
how can i pass the value one from to another form with out use it when ever i want to needed this value that ican useit?
like i have two fields U_test1 and U_test2 table name @AUSR
that i have four form A! , A2,A3,A4 please tell me in details....?

Hi,
U can assign the values to some variables and access then in ur required forms.
Vasu Natari.

How can I pass a value to the command prompt?

I was wondering how can I pass a value to the command prompt with Windows and Linux? I'm more interested in Linux's system than Windows though. Is there a way to return info from the command prompt?

Here is a snippet from http://mindprod.com/jglossexec.html that explains how in detail.
Runtime.getRuntime().exec("myprog.exe") will spawn an external process that runs in parallel with the Java execution. In Windows 95/98/ME/NT/2000/XP, you must use an explicit *.exe or *.com extension on the parameter. It is also best to fully qualify those names so that the system executable search path is irrelevant, and so you don't pick up some stray program off the path with the same name.
To run a *.BAT, *.CMD, *.html *.BTM or URL you must invoke the command processor with these as a parameter. These extensions are not first class executables in Windows. They are input data for the command processor. You must also invoke the command processor when you want to use the < > | piping options, Here's how, presuming you are not interested in looking at the output:
Runtime.getRuntime( ).exec ("command.com /E:1900 /C MyBat.bat" );
Runtime.getRuntime( ).exec ("cmd.exe /E:1900 /C MyCmd.cmd" );
Runtime.getRuntime( ).exec ("C:\\4DOS601\\4DOS.COM /E:1900 /C MyBtm.btm" );
Runtime.getRuntime( ).exec ("D:\\4NT301\\4NT.EXE /E:1900 /C MyBtm.btm" );
There are also overloaded forms of exec(),
Runtime.getRuntime( ).exec ("command.com /E:1900 /C MyBat.bat", null);
Runtime.getRuntime( ).exec ("command.com /E:1900 /C MyBat.bat", null, "C:\\SomeDirectory");
The second argument can be a String [], and can be used to set environment variables. In the second case, "C:\\SomeDirectory" specifies a directory for the process to start in. If, for instance, your process saves files to disk, then this form allows you to specify which directory they will be saved in.
Windows and NT will let you feed a URL string to the command processor and it will find a browser, launch the browser, and render the page, e.g.
Runtime.getRuntime( ).exec ("command.com http://mindprod.com/projects.html" );
Another lower level approach that does not require extension associations to be quite as well set up is:
Runtime.getRuntime( ).exec ("rundll32 url.dll,FileProtocolHandler http://mindprod.com/projects.html" );
Note that a URL is not the same thing as a file name. You can point your browser at a local file with something like this: file://localhost/E:/mindprod/jgloss.html or file:///E|/mindprod/jgloss.html.
Composing just the right platform-specific command to launch browser and feed it a URL to display can be frustrating. You can use the BrowserLauncher package to do that for you.
Note that
rundll32.exe url.dll,FileProtocolHandler file:///E|/mindprod/jgloss.html
won't work on the command line because | is reserved as the piping operator, though it will work as an exec parameter passed directly to the rundll32.exe executable.
With explicit extensions and appropriately set up associations in Windows 95/98/ME/NT/2000/XP you can often bypass the command processor and invoke the file directly, even *.bat.
Similarly, for Unix/Linux you must spawn the program that can process the script, e.g. bash. However, you can run scripts directly with exec if you do two things:
Start the script with #!bash or whatever the interpreter's name is.
Mark the script file itself with the executable attribute.
Alternatively start the script interpreter, e.g.
Runtime.getRuntime( ).exec (new String[]{"/bin/sh", "-c", "echo $SHELL"}";

How can we pass the entire rows of a table to a web service in a VC model ?

Hi,
On the click of the submit button, I have to pass the rows of two tables into an enterprise service. This service also takes other fields of a form as an input.
How can we pass the entire rows of a table into a service ?
Regards,
Nitin

Hi Nitin,
It seems that you have two or three different structures to pass data using your webservice. In your main question, two tables, you can join both in one table and from there call the webservice. In order to pass the entire table you need:
1. Draw a line between your joinned table and your service,
2. Map the fields,
3. Create a 'SUBMIT' in your table tool bar. Right click on your table and choose 'Create Toobar', '+', name and choose 'Submit' as your event.
4. Go to Configure Element (Table View) 'Multiple' at Selection Mode.
Reward points if helps you to solve your question.
Regards,
Gilson Teixeira

How can we pass the master report value in to detail report

Hi All,
My question is how can I pass the master report value in to detail (Child) report filter?
I mean I have one master report if I click on employee name then I have to pass the employee id in to details report filter. Then detail report will display data for that particular employee.
How can I achieve this one in OBIEE?
Please help me to resolve this issue. Thanks in advance for your time and support.

In that case, you should look at using Go Url. In your column formula for the employee name, create a hyperlink to the detail report and pass the employee id.
Take a look at this post: Re: Dyanmic display of the Image Link URL
Thanks!

How can i pass the parameter for strored procedure from java

dear all,
I am very new for stored procedure
1. I want to write the strored procedure for insert.
2. How can i pass the parameter for that procedure from java.
if any material available in internet create procedure and call procedure from java , and passing parameter to procedure from java

Hi Ram,
To call the callable statement use the below sample.
stmt = conn.prepareCall("{call <procedure name>(?,?)}");
stmt.setString(1,value);//Input parameter
stmt.registerOutParameter(2,Types.BIGINT);//Output parameter
stmt.execute();
seq = (int)stmt.getLong(2);//Getting the result from the procedure.

How can i pass the music from my ipod touch to my mac

how can i pass the music from my ipod touch to my mac

If the music on the iPod was purchased through iTunes you can try Transfer Purchases.
Connect the iPod to the Mac and launch iTunes. Right click on the iPod name on the left side of the iTunes window under the devices heading and select Transfer Purchases. That should transfer the music into the iTunes library on the Mac.
iTunes Store: Transferring Purchases

How can i pass the Input value to the sql file in the korn shell ??

Hi,
How can i pass the Input value to the sql file in the korn shell ??
I have to pass the 4 different values to the sql file and each time i pass the value it has to generate the txt file for that value like wise it has to generate the 4 files at each run.
can any one help me out.
Raja

Can you please more elaberate., perhaps you should more elaberate.
sqlplus is a program. you start it from the korn shell. when it's finished, processing control returns to the korn shell. the korn shell and sqlplus do not communicate back and forth.
so "spool the output from .sql file to some txt file from k shell, while passing the input parameters to the sql file from korn shell" makes no sense.

How can I pass data generated in a SubVI inside a Case Structure out of the Case Structure?

Hello,
I am using a USB 2701 to control a heater. I have three SubVIs that are all working properly on their own. I'd like to use an Enum to select which of the SubVIs is running at a given time. The problem is that no data is passing out of the case structure. How can I pass the temperatures and heater outputs acquired by the SubVIs to the main VI? I've attached my some of my code below. I can't attach more than 3 files, but you can see how the main VI is configured. Like I said, the SubVIs are working individually, so you shouldn't really need to look at them.
Thank you,
CJones581
Attachments:
RampHeater6-21-07.vi ‏305 KB
69_Heater_Case.vi ‏23 KB
HeaterTCD6-21-07.vi ‏210 KB

CJones,
You might check a couple of things.
Your HeaterTCD... VI has a While loop with a stop button condition. HeaterTCD pass out values only when it finishes running. If it doesn't pop open the front panel (which usually doesn't happen when running a SubVI) you could run into a stuck loop because you don't have access to the Stop button. This could appear in the form of no data being passed out (because the SubVI never stops running). The primary VI opens the HeaterTCD VI, starts it, and waits for the VI to finish and pass final values .
Secondary note: Unless you want your SubVI panel (which probably isn't open when running the main VI) to update continuously, consider moving your Temperature Graph and Temperature oC indicators outside the while loop. Pass final values to them via a tunnel, since the main VI will only read their values after the loop finishes running, anyway.
It might help to add error management to HeaterTCD like you have for RampHeater. If you connect error lines with Error Outs to your main VI, that will help tell if there is an error somewhere that is preventing info output.
RampHeater SubVI has the same issue with the stop button. It is also probably getting stuck in the While loop waiting for a manual push of that SubVI's Stop button.
An easy way to test this would be to set up a logic circuit so that when the While loop iteration counter reaches a certain number, it registers True and sends it to the conditional. I know this isn't what you want to do long-term, but if that lets your SubVI return outputs it means that the SubVI was just never stopping.
Hope that helps.
David C, Applications Engineering
David C
Applications Engineering

HT201250 how can i pass information from one mac to another mac by using the time capsule

how can i pass information from one mac to another mac by using the time capsule

If you want to transfer files, settings, etc., you must open Migration Assistant (Applications > Utilities) in the Mac that you want to transfer the files and follow the instructions

How can i pass the name of the file polled by the file adapter to next step

Similar Messages

Maybe you are looking for