BizTalk routing using SMTP Adapter
Hello, I have I an Orchestration , depending on STATUS field in Orch how can I send an email using SMTP Adapter ?
For eg : if STATUS = OK, send email saying file is OK
if STATUS = Error, send email saying file is Error
if STATUS= Pending, send email saying file is Pending
if Status =Paid, send email saying file is Paid
How can this be achieved using dynamic send Port ?
MBH
Hi,
Yes, you can achieve this using dynamic send ports.
In decide shape you can check the Status (It can be distinguished field or based on XPATH).
Dynamic Send Port where you set the appropriate email address on the message.
Read
this thread also about sending email dynamically.
You can also refer some good discussion
here.
Please mark as answer or vote as helpful if my reply does
Similar Messages
-
Sending an email with text Content using SMTP Adapter.
I am trying to send an email Message with the .txt attachment using SMTP adapter. I am getting an XML input and I am mapping the input Schema to Flat File Schema. I am trying to Send this Flat File(.txt attachment) in the Email. But I am receiving it as
HTML format only.
The Expression in the Message Transform is,
SMTPUtils.Part.SetContentType(OutgoingFlatFile_Msg.BodyFlatFile,"text");
OutgoingFlatFile_Msg(SMTP.EmailBodyTextCharset)="UTF-8";
DynamicEmailPort(Microsoft.XLANGs.BaseTypes.Address) = "mailto:[email protected]";
OutgoingFlatFile_Msg(SMTP.CC) = "[email protected]";
OutgoingFlatFile_Msg(SMTP.Subject) = "TESTMAIL";
OutgoingFlatFile_Msg(SMTP.From) = "[email protected]";
OutgoingFlatFile_Msg(SMTP.SMTPHost) = "smtp.org";
OutgoingFlatFile_Msg(SMTP.SMTPAuthenticate) = 0;
The Email attachment is HTML format,
<?xml version="1.0" encoding="utf-8"?><ns0:Root xmlns:ns0="http://SampleSMTPEmail.OutgoingFlatFile"><Record><CustomerID>Cus001</CustomerID><OrderID>Ord001</OrderID></Record></ns0:Root>
How to attach the .txt file to the email.Have you tried the following steps:
Create the message (“msgEnvelope”) as a Multi-Part message, with the required message in the Message Body Part (“Attachment”)
Set the following properties of the Envelope Message:
msgEnvelope(SMTP.Subject) = <Email Subject>;
msgEnvelope(SMTP.From) = <Sender Email>;
msgEnvelope(SMTP.SMTPHost) = <Email Host name>";
// This is the default value
msgEnvelope(SMTP.SMTPAuthenticate) = 0;
// Set the message text included in the email
msgEnvelope(SMTP.EmailBodyText) = <Text in body of email>;
// Important - This is required if the EmailBodyText is set
msgEnvelope(SMTP.EmailBodyTextCharset) = "utf-8";
// A value of '1' means include Message Body Part as email attachment
msgEnvelope(SMTP.MessagePartsAttachments) = 1;
Set the following properties of the Message Body Part (“Attachment”):
// Important - Change this MIME type if not sending a Text file
msgEnvelope.Attachment(Microsoft.XLANGs.BaseTypes.ContentType) = "text/plain";
// Set the Filename of the attachment
msgEnvelope.Attachment(MIME.FileName) = <Physical name of the attachment>;
Set the following property on the Dynamic Send Port:
// We set the Email Address on the Port itself
Dynamic_Send_Port(Microsoft.XLANGs.BaseTypes.Address) = <recipient email address>;
http://biztalktalk.wordpress.com/2008/08/28/sending-attachments-through-a-dynamic-send-port/
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Hi,
I have a requirement to receive files from sharepoint and upload files to share point.
So is there anyway we can achive this using webservices in BizTalk (without using sharepoint adapter)
Thanks in advaceI do not have a sample flow... but if you refer to the samples where these web services are used then you'd be able to translate those code samples into BizTalk flows.. For e.g.:
http://msdn.microsoft.com/en-us/library/office/ms429658(v=office.14).aspx refers to returning list items. When you add generated items to your BizTalk for SharePoint Web Services, you'd get the schemas (xmlDocs in the sample) which you'd instantiate and
call.
When dealing with lists, you will need the GUID of the list so you need to do a GetLists call first and then get the GUID for your specific list from that. You will also encounter CAML which is what is used to query and get List Data.
Have fun.
Regards. -
Send Error Type or Description of failed messgaes in body of mail using SMTP adapter
Hi,
I want to send failed messages error type or description to admin to notify him for error occurs in BizTalk, with Error description in body part.
I have set Send port option for "Enable routing of failed messages" and created a send port having SMTP adapter. Now in body I want to send error description.
Pls advise how can I achieve this.
-- Kind Regards SandeepWhen failed message routing is enabled, BizTalk Server does not suspend the message—it routes the message instead.
When a failed message is generated, BizTalk Server promotes error-report-related message context properties and demotes regular message context properties before publishing the failed message. Compare this to the default behavior when
failed message routing is not enabled: Messages that fail are suspended. --------
MSDN
So if i were in this situation i would prefer to route the failed message to SMTP as well as to some kind of transport from which i can again receive the message ( like MSMQ or File).
I mean create a send port group and bind 2 send port to this group (SMTP and MSMQ) and bind this group to that orchestration (specified in previous post) which subscribe the Failed Messages. Then bind the MSMQ location to your receive
location to retry.
I am not sure wheather it is the optimal solution or not ..... but it will work. Kindly let me know if you are not clear with what i said.
Regards -
Dynamic Routing using AQ Adapter
Hi
I am using AQ Adapter to configure my OSB Buisness services to enqueue/Dequeue messages to my AQ queues.
My requirement is to post messages to different Aq queues at runtime without having to reconfigure adapter everytime.
I tried the routing options,It only allows me to change the endpt url which is the Datasource name in aq adapter, but it doesnot allow me to change the queue_name at runtime.
Is there any other way of acheiving dynamic routing for AQ?
Thanks
GayatriThanks for your reply, but i guess i have not been successful in explaining my requirement clearly.
I am not interested in changing the routing pattern at the AQ level using Alter propogation.
My requirement is at one step above this while posting a message to the source AQ queue.
For eg: My Multi consumer table name: Publisher_Table
queues in my Publisher_Table: 1.Pub1
2.Pub 2
3.Pub 3 and so on
I need to post messages on pub1,pub2 etc...however while configuring the AQ adapter for enqueue opertaion i had to hardcode my queue name to Pub1(One among multiple queues created).
My query is whether i can have this queuename as a variable,so that at runtime i can change the target, instead of having to configure multiple aq adapters one for each pub queue.
Thanks
Gayatri -
Wrt 160n router using N adapter
Have a 160N router that has performed fine using my G wireless adapters. Recently installed a wirless adapter with 300 mbps capability to attempt to to get the benefit of the "N" feature on the router. It works fine but it still connects at 54mbps, do i need to do somthing to get it to work at the higher speed?
What is the version number of the Router...?
Try the following settings on the router...
Under the Advance Wireless settings...Disable Frame Burst,Change N <script type="text/javascript">// // <![CDATA[ document.write("Transmission Rate") // </script> Transmission Rate to 15-130Mbps,Change Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Power Cycle the router and check. -
Hello,
I am trying to use SMTP Adapter to send e-mail notification with original FILE NAME in Subject line or Text Body of the e-mail. How can i achieve this without using orchestrationBoatseller is right!
you should using an Orchestration to do it is easier,
If you do not want using Orchestration please refer to
http://blogs.msdn.com/b/nabeelp/archive/2008/09/11/sending-an-html-email-without-an-orchestration.aspx
If would you like try to use SMTP Adapter to send e-mail without deploy biztalk project form visual studio (only simple scenarios and not flexible ^^) use can create static send port in Biztalk Server Administration with SMTP Adapter and then configuration
SMTP server, user, password, subject, text body...
Regards, -
SMTP Adapter work unexpectedly
Hi
I am using SMTP adapter for sending E-Mail .
recently i noticed that , if i disable SMTP Port then it should not send Email and Message should be suspended on Admin console.
as per my knowledge if i resume the instance of message mannually then it should not send Email because port is stopped .
But when i resume the message , it is sending Email .
Please help me i am facing it in production .
Regards
Mohit GuptaHi Mohit,
This seems to be the standard behaviour of the send ports, not just SMTP.
This has been discussed in the past here:
Resuming with Stopped Send Ports and Orchestrations
When's a 'Stopped Send Port' NOT a 'Stopped Send Port' - As per this blog post in 2007, Microsoft had looked in to changing the term
"Stop", "Resume" to "resume for debug". but this not been implemented for some reason. I agree, the terms are misguiding - "Stop" and "Resume". We should have something like "Resume for Debug" to send the message through even when the send port is disabled,
other if the user click just "Resume", message should not pass through when the port is in stopped state.
Good learning, which I never realised till today :)
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Attachment File non-English Name DISAPPEARS problem in BizTalk 2010 SMTP Adapter
Hello ,
I'm using BizTalk 2010 SMTP Adapter for sending mail with attachments by setting them via property SMTP.Attachments
//Attachment
msgEmail(SMTP.Attachments)= AttachmentList;
I have files in several languages (In English and in Russian partialy) for the example
My attachment list looks like this:
"C:\Temp\Files\EnglishNameFile.xml | C:\Temp\Files\RussianFileName_РусскоеИмя.xml";
After the sending Mail with this attachments the second file (it's name partialy in Russian) received without this part name
(The non-english part of name is DISAPPEARS)
like this:
RussianFileName_.xml ( must be RussianFileName_РусскоеИмя.xml)
The NON-English part is DISAPPEARS!!!
And if i have file that doesn't have latin latters (non-english) at all than BizTalk SMTP Adapter change name
to default one like ATT41233.xml
I found this behaviour occur in other non-english languages also!!!
Unfortunately i'm not found any info about this
Any help would be very
much appreciated
VadimRefer to this link -
http://social.msdn.microsoft.com/Forums/en-US/163a47cf-db31-49a5-9ee3-ce9272ba24ff/setting-contenttransferencoding-in-dynamic-smtp-port?forum=biztalkgeneral
There is an option of the Multipart message that controls the filename and the charset used to control how the attachment is treated, including content-transfer encoding.
Regards. -
Duplicate File issue using FTP adapter - BizTalk 2010
Hi We encountered an Issue of picking Duplicate files in BizTalk 2010 from the FTP Location. Need your assistance on this.
Mainframe sends multiple files a 0 KB file to FTP and BizTalk picks during a particular service window using FTP Adapter.
Receive Location has a pipeline component which decodes the MF file(EBCDICRow format).
Send Port transmits the file which is decoded in the Receive location. There is no mapping or orchestration involved.
When 2 files are placed in FTP Location. BizTalk Transmits the files successfully
No suspended messages in BizTalk but we see below error in event log. we tried reproduce the issue but no luck.
Host Instance running FTP Location is Clustered
There was a failure executing the receive pipeline: "XXXX.XX.Pipelines.Receive_XXX_TransactionsMC_passthru, XXX.XX.Pipelines, Version=1.0.0.0, Culture=neutral, PublicKeyToken=c2d1f476d5c2f97d"
Source: "EbcdicRowDeCode" Receive Port: "XXX.XX.MCSTransactionsMC" URI: "ftp://XXXXXXXX:21/'XXXX'/MCSDT.DEFKOP.R001.D*.T*" Reason: Unable to cast object of type 'Microsoft.BizTalk.Streaming.BasicStreamWrapper' to type 'XXX.BizTalk.Pipeline.Components.Streams.V3.VirtualStream
MF Puts below Files at FTP Location
PSNOX.MCSDT.DEFKOP.R001.D150406.T009000
PSNOX.MCSDT.DEFKOP.R001.D150406.T002100
BizTalk Picks ( at specified Service window) and Transmits as
PSNOX.MCSDT.DEFKOP.R001.D150406.T009000
PSNOX.MCSDT.DEFKOP.R001.D150406.T009000
PSNOX.MCSDT.DEFKOP.R001.D150406.T002100
Regards
-SriHi Sri,
There could be two reason for such a behavior:
1) Using Non-Clustered Hosts: It is always recommended to use the clustered host for FTP adapter. Because FTP don't allow
any locking mechanism on the files so in case of non-clustered with multiple host instances you might receive same file multiple times through different host instances.
2) If the original document is still being written to the FTP server by the host application, the FTP adapter cannot
delete the document and will retrieve another copy of the document at the next polling interval that is configured for the receive location. This behavior causes document duplication to occur.
Workaround could be:
Configure the host application to write to a temporary folder on the same hard disk as the public FTP folder and to periodically move the contents of the temporary folder
to the FTP folder. The temporary folder should be on the same hard disk as the public FTP folder to make sure that the move operation is atomic. An atomic operation is an operation that is functionally indivisible. If you write data to the public FTP folder
by using the BizTalk Server FTP adapter, you can do this by specifying a Temporary Folder property in the FTP Transport Properties dialog box when you configure a send port. If you specify a Temporary Folder property, make sure that this folder is on the same
physical disk as the public FTP folder.
Configure the FTP receive location to operate within a service window when the host application is not writing data to the FTP server. You can specify the service window
when you configure the receive location properties.
Refer: Known Issues with the FTP
Adapter
Rachit
Please mark as answer or vote as helpful if my reply does -
Sequential files proccessing using SFTP adapter in Biztalk
Hi All,
I want pick the file by sequential from receive location by using SFTP adapter.
Can anybody please tell me What is the process flow of sequential picking the file in biztalk??
Thanks In advnce
PrabhakarYou can check the following links
http://msdn.microsoft.com/en-us/library/aa561967.aspx
http://social.technet.microsoft.com/wiki/contents/articles/6378.biztalk-instance-subscription-and-convoys-details.aspx
http://geekswithblogs.net/michaelstephenson/archive/2009/01/01/128295.aspx
http://abdulrafaysbiztalk.wordpress.com/2009/10/20/enterpriseintegrationpattern_resequencer/
http://www.cloudcasts.net/ViewWebcast.aspx?webcastid=2521599811294205439
for picking up file from sftp you need to use either
builtin sftp adapter in for BizTalk 2013 or open source sftp adapter for earlier versions
I hope this will help you -
SMTP Adapter: Not sending email for one of the applications
I have a weird problem. I have three applications that need to send emails. Two of them are sending emails but the third one is not. Practically everything in the third is a copy-paste from the second application. Uses the same handler and so forth. In reality
there is no reason there should be any failure.
How can I track if my email request was sent to the smtp server in the first place and also why this one is failing? Further, anything on the smtp server that could help tracing this message. May be it is failing there?The SMTP Adapter don't just "through away" messages. If your Tracked Service Instances shows that a message was sent through the Port, I am pretty sure that a mail was indeed sent.
-Are you using Static- or Dynamic Port?
Can you try to set the Send Port in "Stopped" state, and then send a message to it. Examine the message suspended in BizTalk, and if everything looks ok, then start the Port again and check that the message has disappeared from both suspended and running
instances in the Group Hub.
If so, quickly check the mail box, make sure that no spam-filters etc. are messing up your test.
Morten la Cour -
Webserver on DMZ cannot send email via php script using SMTP (cisco firewall pix 515e)
Hello,
I have two web servers that are sitting in a DMZ behind a Cisco Firewall PIX 515e. The webservers appear to be configured correctly as our website and FTP website are up. On two of our main website, we have two contact forms that use a simple html for to call a php script that uses smtp as its mailing protocol. Since, I am not the network administrator, I don't quite understand how to read the current configurations on the firewall, but I suspect that port 25 is blocked, which prevents the script from actually working or sending out emails. What I've done to narrow the problem done is the following: I used a wamp server to test our scripts with our smtp servers settings, was able to successfully send an email out to both my gmail and work place accounts. Currently, we have backupexec loaded on both of these servers, and when I try to send out an alert I never receive it. I think because port 25 is closed on both of those servers. I will be posting our configuration. if anyone can take a look and perhaps explain to me how I can change our webservers to communicate and successfully deliver mail via that script, I would gladly appreciate it. our IP range is 172.x.x.x, but it looks like our webservers are using 192.x.x.x with NAT in place. Please someone help.
Thanks,
Jeff Mateo
PIX Version 6.3(4)
interface ethernet0 100full
interface ethernet1 100full
interface ethernet2 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
nameif ethernet2 DMZ security50
enable password GFO9OSBnaXE.n8af encrypted
passwd GFO9OSBnaXE.n8af encrypted
hostname morrow-pix-ct
domain-name morrowco.com
clock timezone EST -5
clock summer-time EDT recurring
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
no fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
name 12.42.47.27 LI-PIX
name 172.20.0.0 CT-NET
name 172.23.0.0 LI-NET
name 172.22.0.0 TX-NET
name 172.25.0.0 NY-NET
name 192.168.10.0 CT-DMZ-NET
name 1.1.1.1 DHEC_339849.ATI__LEC_HCS722567SN
name 1.1.1.2 DHEC_339946.ATI__LEC_HCS722632SN
name 199.191.128.105 web-dns-1
name 12.127.16.69 web-dns-2
name 12.3.125.178 NY-PIX
name 64.208.123.130 TX-PIX
name 24.38.31.80 CT-PIX
object-group network morrow-net
network-object 12.42.47.24 255.255.255.248
network-object NY-PIX 255.255.255.255
network-object 64.208.123.128 255.255.255.224
network-object 24.38.31.64 255.255.255.224
network-object 24.38.35.192 255.255.255.248
object-group service morrow-mgmt tcp
port-object eq 3389
port-object eq telnet
port-object eq ssh
object-group network web-dns
network-object web-dns-1 255.255.255.255
network-object web-dns-2 255.255.255.255
access-list out1 permit icmp any any echo-reply
access-list out1 permit icmp object-group morrow-net any
access-list out1 permit tcp any host 12.193.192.132 eq ssh
access-list out1 permit tcp any host CT-PIX eq ssh
access-list out1 permit tcp any host 24.38.31.72 eq smtp
access-list out1 permit tcp any host 24.38.31.72 eq https
access-list out1 permit tcp any host 24.38.31.72 eq www
access-list out1 permit tcp any host 24.38.31.70 eq www
access-list out1 permit tcp any host 24.38.31.93 eq www
access-list out1 permit tcp any host 24.38.31.93 eq https
access-list out1 permit tcp any host 24.38.31.93 eq smtp
access-list out1 permit tcp any host 24.38.31.93 eq ftp
access-list out1 permit tcp any host 24.38.31.93 eq domain
access-list out1 permit tcp any host 24.38.31.94 eq www
access-list out1 permit tcp any host 24.38.31.94 eq https
access-list out1 permit tcp any host 24.38.31.71 eq www
access-list out1 permit tcp any host 24.38.31.71 eq 8080
access-list out1 permit tcp any host 24.38.31.71 eq 8081
access-list out1 permit tcp any host 24.38.31.71 eq 8090
access-list out1 permit tcp any host 24.38.31.69 eq ssh
access-list out1 permit tcp any host 24.38.31.94 eq ftp
access-list out1 permit tcp any host 24.38.31.92 eq 8080
access-list out1 permit tcp any host 24.38.31.92 eq www
access-list out1 permit tcp any host 24.38.31.92 eq 8081
access-list out1 permit tcp any host 24.38.31.92 eq 8090
access-list out1 permit tcp any host 24.38.31.93 eq 3389
access-list out1 permit tcp any host 24.38.31.92 eq https
access-list out1 permit tcp any host 24.38.31.70 eq https
access-list out1 permit tcp any host 24.38.31.74 eq www
access-list out1 permit tcp any host 24.38.31.74 eq https
access-list out1 permit tcp any host 24.38.31.74 eq smtp
access-list out1 permit tcp any host 24.38.31.75 eq https
access-list out1 permit tcp any host 24.38.31.75 eq www
access-list out1 permit tcp any host 24.38.31.75 eq smtp
access-list out1 permit tcp any host 24.38.31.70 eq smtp
access-list out1 permit tcp any host 24.38.31.94 eq smtp
access-list dmz1 permit icmp any any echo-reply
access-list dmz1 deny ip any 10.0.0.0 255.0.0.0
access-list dmz1 deny ip any 172.16.0.0 255.240.0.0
access-list dmz1 deny ip any 192.168.0.0 255.255.0.0
access-list dmz1 permit ip any any
access-list dmz1 deny ip any any
access-list nat0 permit ip CT-NET 255.255.0.0 192.168.220.0 255.255.255.0
access-list nat0 permit ip host 172.20.8.2 host 172.23.0.2
access-list nat0 permit ip CT-NET 255.255.0.0 LI-NET 255.255.0.0
access-list nat0 permit ip CT-NET 255.255.0.0 NY-NET 255.255.0.0
access-list nat0 permit ip CT-NET 255.255.0.0 TX-NET 255.255.0.0
access-list vpn-split-tun permit ip CT-NET 255.255.0.0 192.168.220.0 255.255.255
.0
access-list vpn-split-tun permit ip CT-DMZ-NET 255.255.255.0 192.168.220.0 255.2
55.255.0
access-list vpn-dyn-match permit ip any 192.168.220.0 255.255.255.0
access-list vpn-ct-li-gre permit gre host 172.20.8.2 host 172.23.0.2
access-list vpn-ct-ny permit ip CT-NET 255.255.0.0 NY-NET 255.255.0.0
access-list vpn-ct-ny permit ip CT-DMZ-NET 255.255.255.0 NY-NET 255.255.0.0
access-list vpn-ct-tx permit ip CT-NET 255.255.0.0 TX-NET 255.255.0.0
access-list vpn-ct-tx permit ip CT-DMZ-NET 255.255.255.0 TX-NET 255.255.0.0
access-list static-dmz-to-ct-2 permit ip host 192.168.10.141 CT-NET 255.255.248.
0
access-list nat0-dmz permit ip CT-DMZ-NET 255.255.255.0 192.168.220.0 255.255.25
5.0
access-list nat0-dmz permit ip CT-DMZ-NET 255.255.255.0 LI-NET 255.255.0.0
access-list nat0-dmz permit ip CT-DMZ-NET 255.255.255.0 NY-NET 255.255.0.0
access-list nat0-dmz permit ip CT-DMZ-NET 255.255.255.0 TX-NET 255.255.0.0
access-list static-dmz-to-ct-1 permit ip host 192.168.10.140 CT-NET 255.255.248.
0
access-list static-dmz-to-li-1 permit ip CT-DMZ-NET 255.255.255.0 CT-NET 255.255
.248.0
access-list vpn-ct-li permit ip CT-NET 255.255.0.0 LI-NET 255.255.0.0
access-list vpn-ct-li permit ip CT-DMZ-NET 255.255.255.0 LI-NET 255.255.0.0
access-list vpn-ct-li permit ip host 10.10.2.2 host 10.10.1.1
access-list in1 permit tcp host 172.20.1.21 any eq smtp
access-list in1 permit tcp host 172.20.1.20 any eq smtp
access-list in1 deny tcp any any eq smtp
access-list in1 permit ip any any
access-list in1 permit tcp any any eq smtp
access-list cap4 permit ip host 172.20.1.82 host 192.168.220.201
access-list cap2 permit ip host 172.20.1.82 192.168.220.0 255.255.255.0
access-list in2 deny ip host 172.20.1.82 any
access-list in2 deny ip host 172.20.1.83 any
access-list in2 permit ip any any
pager lines 43
logging on
logging timestamp
logging buffered notifications
logging trap notifications
logging device-id hostname
logging host inside 172.20.1.22
mtu outside 1500
mtu inside 1500
mtu DMZ 1500
ip address outside CT-PIX 255.255.255.224
ip address inside 172.20.8.1 255.255.255.0
ip address DMZ 192.168.10.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool ctpool 192.168.220.100-192.168.220.200
ip local pool ct-thomson-pool-201 192.168.220.201 mask 255.255.255.255
pdm history enable
arp timeout 14400
global (outside) 1 24.38.31.81
nat (inside) 0 access-list nat0
nat (inside) 1 CT-NET 255.255.0.0 2000 10
nat (DMZ) 0 access-list nat0-dmz
static (inside,DMZ) CT-NET CT-NET netmask 255.255.0.0 0 0
static (inside,outside) 24.38.31.69 172.20.8.2 netmask 255.255.255.255 0 0
static (DMZ,outside) 24.38.31.94 192.168.10.141 netmask 255.255.255.255 0 0
static (inside,outside) 24.38.31.71 172.20.1.11 dns netmask 255.255.255.255 0 0
static (DMZ,outside) 24.38.31.93 192.168.10.140 netmask 255.255.255.255 0 0
static (DMZ,inside) 24.38.31.93 access-list static-dmz-to-ct-1 0 0
static (DMZ,inside) 24.38.31.94 access-list static-dmz-to-ct-2 0 0
static (inside,outside) 24.38.31.92 172.20.1.56 netmask 255.255.255.255 0 0
static (DMZ,outside) 24.38.31.91 192.168.10.138 netmask 255.255.255.255 0 0
static (DMZ,outside) 24.38.31.90 192.168.10.139 netmask 255.255.255.255 0 0
static (inside,outside) 24.38.31.72 172.20.1.20 netmask 255.255.255.255 0 0
static (inside,outside) 24.38.31.73 172.20.1.21 netmask 255.255.255.255 0 0
static (inside,outside) 24.38.31.70 172.20.1.91 netmask 255.255.255.255 0 0
static (DMZ,outside) 24.38.31.88 192.168.10.136 netmask 255.255.255.255 0 0
static (DMZ,outside) 24.38.31.89 192.168.10.137 netmask 255.255.255.255 0 0
static (inside,outside) 24.38.31.74 172.20.1.18 netmask 255.255.255.255 0 0
static (inside,outside) 24.38.31.75 172.20.1.92 netmask 255.255.255.255 0 0
access-group out1 in interface outside
access-group dmz1 in interface DMZ
route outside 0.0.0.0 0.0.0.0 24.38.31.65 1
route inside 10.10.2.2 255.255.255.255 172.20.8.2 1
route inside CT-NET 255.255.248.0 172.20.8.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
aaa-server ct-rad protocol radius
aaa-server ct-rad max-failed-attempts 2
aaa-server ct-rad deadtime 10
aaa-server ct-rad (inside) host 172.20.1.22 morrow123 timeout 7
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication telnet console LOCAL
http server enable
http 173.220.252.56 255.255.255.248 outside
http 65.51.181.80 255.255.255.248 outside
http 208.65.108.176 255.255.255.240 outside
http CT-NET 255.255.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server community m0rroW(0
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
sysopt connection permit-pptp
crypto ipsec transform-set 3des-sha esp-3des esp-sha-hmac
crypto ipsec transform-set 3des-md5 esp-3des esp-md5-hmac
crypto dynamic-map dyn_map 20 match address vpn-dyn-match
crypto dynamic-map dyn_map 20 set transform-set 3des-sha
crypto map ct-crypto 10 ipsec-isakmp
crypto map ct-crypto 10 match address vpn-ct-li-gre
crypto map ct-crypto 10 set peer LI-PIX
crypto map ct-crypto 10 set transform-set 3des-sha
crypto map ct-crypto 15 ipsec-isakmp
crypto map ct-crypto 15 match address vpn-ct-li
crypto map ct-crypto 15 set peer LI-PIX
crypto map ct-crypto 15 set transform-set 3des-sha
crypto map ct-crypto 20 ipsec-isakmp
crypto map ct-crypto 20 match address vpn-ct-ny
crypto map ct-crypto 20 set peer NY-PIX
crypto map ct-crypto 20 set transform-set 3des-sha
crypto map ct-crypto 30 ipsec-isakmp
crypto map ct-crypto 30 match address vpn-ct-tx
crypto map ct-crypto 30 set peer TX-PIX
crypto map ct-crypto 30 set transform-set 3des-sha
crypto map ct-crypto 65535 ipsec-isakmp dynamic dyn_map
crypto map ct-crypto client authentication ct-rad
crypto map ct-crypto interface outside
isakmp enable outside
isakmp key ******** address LI-PIX netmask 255.255.255.255 no-xauth no-config-mo
de
isakmp key ******** address 216.138.83.138 netmask 255.255.255.255 no-xauth no-c
onfig-mode
isakmp key ******** address NY-PIX netmask 255.255.255.255 no-xauth no-config-mo
de
isakmp key ******** address TX-PIX netmask 255.255.255.255 no-xauth no-config-mo
de
isakmp identity address
isakmp nat-traversal 20
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash sha
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption 3des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
isakmp policy 30 authentication pre-share
isakmp policy 30 encryption 3des
isakmp policy 30 hash md5
isakmp policy 30 group 1
isakmp policy 30 lifetime 86400
vpngroup remotectusers address-pool ctpool
vpngroup remotectusers dns-server 172.20.1.5
vpngroup remotectusers wins-server 172.20.1.5
vpngroup remotectusers default-domain morrowny.comAmit,
I applaud your creativity in seeking to solve your problem, however, this sounds like a real mess in the making. There are two things I don't like about your approach. One, cron -> calling Java -> calling PHP -> accessing database, it's just too many layers, in my opinion, where things can go wrong. Two it seems to me that you are exposing data one your website (with the PHP) that you may not want expose and this is an important consideration when you are dealing with emails and privacy and so on.
I think the path of least resistance would be to get a new user account added to the MySQL database that you can access remotely with your Java program. This account can be locked down for read only access and be locked down to the specific IP or IP range that your Java program will be connecting from.
Again I applaud your creativity but truly this seems like a hack because of the complexity and security concerns you are introducing and I think is a path to the land of trouble. Hopefully you will be able to get a remote account set up. -
Sending empty files using SFTP Adapter
I am trying to send empty files using SFTP adapter. The interface has to send the file whether its empty file or containing data using SFTP adapter. I am using BizTalk Server 2013 R2. Is it a bug or the hotfix is already there for this issue.
The issue here is not your SFTP not able to send 0KB files, but the file receive adapter that is receiving the file. The file adapter deletes 0 KB files and doest not transmit it further.
If u have a ftp receive for example you should be able to send 0KB files.
If u have a custom file receive adapter , is it handling 0KB files ?
Regards <br/> When you see answers and helpful posts,<br/> please click Vote As Helpful, Propose As Answer, and/or Mark As Answer -
Problem with BizTalk server 2013 SFTP adapter on Cloud VM
All,
We have deployed Microsoft Biztalk Server 2013 Enterprise edition on a cloud VM. We are facing an issue with SFTP adapter to receive. Following are the details;
On this VM, we are facing an issue with BizTalk server 2013 SFTP adapter. The SFTP location can receive and send message through SFTP clients and .Net code. But using BizTalk server 2013 SFTP adapter we are only able to send the file on SFTP location but
could not receive the files from same location.
We are getting just one line error in system event log that is :
Event#7011. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the BTSSvc$BizTalkServerApplication service.
Regards,
Shoaib DanishHi
BizTalk Server 2013 is available on Windows Azure. BizTalk Server 2013 can be installed locally on your hardware
and in Windows Azure as a virtual machine. Please follow the procedures to check it on your side.
Configuring BizTalk Server 2013 on a Windows Azure VM
Create a BizTalk Virtual Machine in Windows Azure
Create the BizTalk Group Prerequisites
Configure the BizTalk Group
Best regards
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Problem installing ActiveX viewer in Windows 7
Hello, We downloaded the public beta of Windows 7 today and I am getting an error in our web application when it tries to install the Crystal Reports XI ActiveX report viewer (version 11.0.0.1424 of crviewer.dll). IE8 will issue its normal prompt to
-
How to stop the restructuring (ran manually) which is running in the backg
How to stop the restructuring (ran manually) which is running in the background. Tried stop the data base from EAS , but got error message saying that it is not acceptiong any commands.
-
Check for duplicated invoices - Special G/L indicator
Hi Gurus, When posting an invoice to a vendor with special G/L indicator, the check for duplicated invoices is not efectuated by the system. For normal GL posting the message F5 117 is defined as an error message. This happens in F-02 and FB60 transa
-
education team work together with "normal" team?
-
How do you create flow chart in Photoshop?
I am trying to make a massive flowchart in Photoshop but connecting the arrows, lines, etc is a total pain in the butt. Is there a template, or a better way to do it? It is very easy in excel, power point and so on. Any help would be greatly appre