How can I pause resume kernel building

Hello,
I have an idea.
I want to build android kernel, but I afraid I cannot finished, because sometimes I haven't enough time. I need to reboot, or switch off the pc.
So how can I pause, save state or resume the build process.
I though about it from virtualbox, but mine problems are. The VB do full virtual pc, I dont want to separate cpu, memory and something, and install new arch linux to guest.
I want only save and resume the build process.
How can I do?
I wait your answer.
Thanks Gyu..

If you are compiling kernel "by hand", cancel it with ctrl+c for example, and restart the compilation later, it won't recompile the parts you had already compiled (unless you change your .config or something).
so basically the kernel building should be resumed automatically.
this probably won't work if your building the kernel with makepkg though.

Similar Messages

  • How can I pause the task and resume it in some times?

    Hi all,
      I have been using traditional DAQ for some times and I swtich to DAQmx recently. In traditional DAQ, I can start a task, pause it for a while and then resume the task. But in DAQmx, I didn't see the same function. Is that any way to do the same thingin DAQmx? Thanks.

    Hi PKIM,
    Have you seen this thread?
    http://forums.ni.com/t5/Multifunction-DAQ/How-can-​I-pause-and-resume-analog-output-using-DAQmx/td-p/​...
    The thread details how to create a pause trigger in software. A better option may be to create a pause trigger in hardware. I'm not sure what type of data acquisition task you are doing, but the method should work regardless. Please let me know if you have any questions.
    Best Regards,
    Ian K.
    Applications Engineer
    National Instruments

  • How can I pause and continue tests execution?

    Hello dev team,
    Thank you for the greate tool for running Flex tests. It is very very helpful for me and saved a lot of time. And I'm waiting for new releases.
    I wonder how can I pause/restart/continue running tests.
    Thanks in advance.
    Alexey

    Welcome to Apple Support Communities
    Simply press the icon of the app you are downloading, and its name will change to Paused. To resume it, press the icon of the app again

  • How can i see my kernel level patch.

    Dear Friends,
    How can i see my kernel level patch.
    sach

    Hi sachin,
    When you logon to the SAP system you will get SAP Eassy Acess  screen.
    In that screen menu bar click on SYSTEM->STATUS->OTHER KERNEL INFORMATION(shift+F5).
    I HOPE IT WILL HELP YOU.
    KIRAN

  • How can I pause the screensaver

    How can I pause the screensaver.
    I am using osx 10.8.2
    Thanks in advance

    My screensaver becomes active after 5 mins and displays photos from my iPhoto library.  Before my update to 10.8.2 I was able to pause on a picture  by pressing I think was the down arrow key (to pause and un-pause) and  scroll through the pictures by using the left or right arrow keys the scroll part works still however I am unable to pause. Once I press the down arrow key or spacebar the screensaver comes off.
    Thanks again
    Chris

  • [SOLVED]How can I disable ehci_hcd kernel module?

    How can I disable ehci_hcd kernel module loading?
    I have up to date archlinux.
    I tried add 'modprobe -r ehci_hcd' to '/etc/rc.local' but this broke net-profiles - ppp connection at bootup(I have USB modem (which of course work with uhci_hcd module) connected).
    I also tried with '/etc/modprobe.d/modprobe.conf' and 'blacklist ehci_hcd' but ehci_hcd still loading at bootup.
    Last edited by amen (2010-01-27 17:48:45)

    bangkok_manouel wrote:http://wiki.archlinux.org/index.php/Rc.conf#Hardware
    Thanks, but:
    1) blacklist module in /etc/rc.conf not work:
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(floppy !snd-pcsp !ehci_hcd)
    2) this not work also:
    MOD_AUTOLOAD="no"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(long_long_list_of_modules_without_ehci_hcd)
    I found solution:
    1) comments 2 lines in /etc/modprobe.d/usb-load-ehci-first.conf
    #install ohci_hcd /sbin/modprobe ehci_hcd ; /sbin/modprobe --ignore-install ohci_hcd $CMDLINE_OPTS
    #install uhci_hcd /sbin/modprobe ehci_hcd ; /sbin/modprobe --ignore-install uhci_hcd $CMDLINE_OPTS
    2) and blacklist module ehci_hcd in /etc/rc.conf.

  • When I play a movie in iDVD, how can I pause to return to main menu?

    When I play a Quicktime movie in iDVD, is it possible to have a progress slider and have controls with play, pause, forward or rewind while playing? Right now, what it does is the movie plays entirely and returns to main menu after playing.
    Also, how can I return to main menu even if the video hasn't entirely played?
    Thanx in advance!
    Serge

    When I play a Quicktime movie in iDVD, is it possible to have a progress slider and have controls with play, pause, forward or rewind while playing? Right now, what it does is the movie plays entirely and returns to main menu after playing.
    No, not in iDVD - Have you tried the controls on your DVD player remote - that's what I do.
    Also, how can I return to main menu even if the video hasn't entirely played?
    I just hit the 'Menu' button on my DVD player remote.

  • How can upgrade the linux kernel

    i want upgrade my linux kernel of my arch 
    so
    tell me how can i do it ?
    thanks........

    zqyking wrote:
    archman-cro wrote:What a question!
    What kernel? What version? From where?
    .......... ni tai sb le  dui ni wu yu
    Love you too.

  • Why and how can Premiere cause a kernel panic? (at all, much less as often as I'm seeing)

    I get kernel panics disturbingly often with Premiere CC 2014 (and multiple versions of OS X---both Mavericks and Yosemite). Trying to render moves on an oversized still or feathered masking color correction seem to be common causes, and I suspect OpenCL hardware acceleration is related.
    But regardless of the specific causes, I'm curious about the fact that Premiere seems to be the only app on my Retina MacBook Pro that causes kernel panics as far as I can tell. Is that due to the kernel extensions needed for OpenCL hardware acceleration? How can Premiere even access the internals of OS X so deeply that it can cause kernel panics in the first place? Most apps that crash, just crash and don't take down the machine with them.

    The RAM needs specs as shown below.
    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

  • How can I pause a download in the new iTunes (v.11)?

    I downloaded and installed the new iTunes (v.11) this weekend.  In this new verison how do you pause a download?  In the former versions, while files were downloading, there was a list.  Where is that in this new version?
    Thanks

    its on top right of the app.
    ... Once you begin downloading something new icons will show up right of the search box. click it and will display all downloads. Then it will go away when its all done

  • How can I pause an action while recording so I can...

    Hi all,
    I have made many actions before but I do not know how to do this. Ok I want to make an action which will unlock the background layer then duplicate that layer and add adjustment mask to the new layer, I have gotten all this done. But on the final stage of the action I want to open Shadow/Highlight adjustment window; now at this point I want the playing action to stop while I adjust the S/H then continue after I hit OK. I have tried inserting stop into the recording but that does not work. Is there any way to do this? I am working with PS CS2 on a Mac G5. Thanks for any help!

    To the left of the listing of »Shadows/Highlights« in the Actions Panel is a field, which can be toggled: »Toggle dialog on/off«
    If You hit that it should turn into a little symbol of a dialog-window (I guess) and on subsequently running that Action You should be able to do edits in the dialog-panel and have the Action resume on hitting Enter.

  • How can i choose charecteristics while building aggregates on zsd-c03

    Hi Experts,
    I would like to build aggregates on my sales infocube. In this infocube having 6 dimensions,
    When we are building aggregates on characteristics how would i know on which characteristics want to choose for aggregates is there any t.code to measure size of the dimension.
    Can you please share you valuable ideas.
    Regards
    Siri

    Hi
    Genrally when we create aggregates ,we will follow some guidelines.
    1.If aggregation is more than 10
    2.If DB ratio is morethan 30.
    We can check these in the following t_codes
    ST03,RSDDSTAT& RSRT
    When we create aggregates,u will get popup whether to create urself or system proposals.U can get info from system proposals also.
    Assign points if useful.
    Regards,
    Hari

  • How can I disable Resume

    It my be a  nice feature to restart your computer with your former apps. But its for my apps terrible time-comsuming until I can start to work. Who tells me how to stop Resume on starting my Macbook Pro?

    In addition,
    Uncheck this option when shutting down or restarting.  I must be done every time as it doesn't stick.
    Captfred

  • How can I pause a slide until the user clicks a button?

    I wish to pause a slide until the user clicks a button (which I've created out of a Smartshape). The thing is that I haven't added a click box object over the smartshape but have only set the smartshape properties to "Use as Button". If I were to add a clickbox object, I would get a "Pause project until user clicks" in the options section of the properties. However in using a smartshape as a button, I cannot find this option. I am using Captivate 6. Seems strange as I would have expected to see the same checkbox option even if I were to use a smartshape as a button but I dont. Can't someone help me and let me know if I'm missing something.
    Of course I could use a clickbox over my smartshape to achieve what I want, but I want to avoid thsi for two reason:
    I want to avoid adding another object when I dont need it.
    My smartshape is a right arrow (indicating "Begin"), and I dont want a squarish click box sitting on top of a triangle because that just shows the hand pointer even if the cursor isn't exactly over the arrow button because it enter the clickbox area.
    Thanks,
    Sean

    Select the Smart Shape button , go to Properties > Timing accordion > Pause After and set the number of seconds from the beginning of the slide for it to pause.

  • How can i pause a video that i'm recording still, and how can i zoom too ?

    I recorded some videos but i would like to pause it some times to continue after and zoom in/out to approximate some things in a video.
    Someone can help me ?!

    As per I know in iphone inbuilt camera app there's no such zooming option neither pause but you can try other apps from the app store

Maybe you are looking for