How can I perform a "jump" or a "goto" from a sequence frame to a previous one?

At a point of my program, I need to jump from a sequence frame to a previous one. How can I do it?
Thank you.

Hi
That is not possible! You cannot jump from one frame to another frame. A workaround is to replace a sequence structure with a case structure insight a while loop. When you wire the iteration terminal of the loop to the selector terminal of the case structure you have a "sequence structure" with the advantage to stop it in each frame. Returning to your question: Work with a state machine approach! For that you need a case structure insight a while loop with a shift register! So you can always say what the next frame must be.See under the VI templates for an example! => National Instruments\Labview\templates\state machine.vit
Regards,
Luca

Similar Messages

How can I create a diagram where equal data from different cells will be added to one sector?

Hi,
I'm a new Mac user, so I have a lot of problems and questions every day. Moving to Mac from PC is not an easy thing)
Here is my problem:
I need to create a few diagrams for my science work, but can't correct one mistake. Every time one data from one cell from the table takes its own place in the diagram. But I need to ceparate equal data to show it is one section.
An example:
Sex
Age
Female
18
Female
18
Female
18
Female
25
Female
30
We need to create a diagram to show that we have
60% - 18 years
20% - 25 years
20% - 30 years
But Numbers doesn't show it that way. Here how it does:
So please help me. How can I do that?

Hi ProCauda,
Some example data of people and their age:
The COUNTIF function will give the number of people of each age.
In another table, B2 contains this formula (and Fill Down to the bottom of B)
=COUNTIF(Table 1::B,"="&A2)
In this example, 3 people are 18 years old, 0 people are 19 years old, and so on. Use this table to calculate each age as the % of the total, then use that as the data for your diagram (graph, chart).
Regards,
Ian.

How can I move all my info and apps from my old Ipad to a new one

I use to have a 32 Gb iPad2 and I just bought a new 64 Gb iPad2 and want to move all that I have to the new one and reset the old one to sell it... how can i do that?

Reset and Erase before selling
Settings>General>Reset>Erase all Content and Settings

HT2731 How can I transfer music in my Itunes account from my old laptop to new one?

How can I transfer my entire ITUNES songs library from my old laptop to my new one?

There's a few different ways to do the move. The following document is worth checking through:
iTunes: How to move your music to a new computer

How can I perform a bulk assignment to one Task

Hi All,
I would like to allow all resources to assign some of their time to a cProjects Task (XXXX Implementation plan). How can I perform a bulk assignment to this task, instead of performing individual assignments?
Please help.
Thanks,
Srini

Not quite sure I fully understand your question. When you go to the "roles" tab of a task you are allowed to assign multiple resources to a task either from the same role or different roles. The total work or effort for the task can be distributed accross the multiple assignments.

I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to use sync data in my iphone back to itune n my lap top. how can I perform this task with out loosing data in my i phone.

I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to sync data in my iphone back to itune on my lap top. how can I perform this task with out loosing data in my i phone.

Hey floridiansue,
Do you have an installed email program such as Microsoft Outlook? If your email is through an online login, such as Gmail, etc, then one will have to create an email association with a program such as Microsoft Outlook on the PC for this Scan to Email system to function.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

How can i perform a search on my external hard drive on my mac pro os x 10.9.2 ?

how can i perform a search on my external hard drive on my mac pro os x 10.9.2 ?

Mac OS X 10.9.2 is 12 years newer than 9.2.x. You need to make sure that Spotlight has indexed the external hard drive by adding it and removing it from Apple menu -> System Preferences -> Spotlight -> Privacy. Check the menu for it:
to determine if indexing is still going on, as it will say indexing.
Alternatively, you can use a non-Spotlight tool, such as:
http://apps.tempel.org/FindAnyFile/
http://www.devontechnologies.com/products/freeware/ - EasyFind
http://www.osxbytes.com/ - iFileX (note the MacUpdate link provided on osxbytes page has a Malware advertisement for MacKeeper, do not download).
http://www.barebones.com/ Textwrangler has a Search file for content, which works on any Text file.

How can I perform this kind of range join query using DPL?

How can I perform this kind of range join query using DPL?
SELECT * from t where 1<=t.a<=2 and 3<=t.b<=5
In this pdf : http://www.oracle.com/technology/products/berkeley-db/pdf/performing%20queries%20in%20oracle%20berkeley%20db%20java%20edition.pdf,
It shows how to perform "Two equality-conditions query on a single primary database" just like SELECT * FROM tab WHERE col1 = A AND col2 = B using entity join class, but it does not give a solution about the range join query.

I'm sorry, I think I've misled you. I suggested that you perform two queries and then take the intersection of the results. You could do this, but the solution to your query is much simpler. I'll correct my previous message.
Your query is very simple to implement. You should perform the first part of query to get a cursor on the index for 'a' for the "1<=t.a<=2" part. Then simply iterate over that cursor, and process the entities where the "3<=t.b<=5" expression is true. You don't need a second index (on 'b') or another cursor.
This is called "filtering" because you're iterating through entities that you obtain from one index, and selecting some entities for processing and discarding others. The white paper you mentioned has an example of filtering in combination with the use of an index.
An alternative is to reverse the procedure above: use the index for 'b' to get a cursor for the "3<=t.b<=5" part of the query, then iterate and filter the results based on the "1<=t.a<=2" expression.
If you're concerned about efficiency, you can choose the index (i.e., choose which of these two alternatives to implement) based on which part of the query you believe will return the smallest number of results. The less entities read, the faster the query.
Contrary to what I said earlier, taking the intersection of two queries that are ANDed doesn't make sense -- filtering is the better solution. However, taking the union of two queries does make sense, when the queries are ORed. Sorry for the confusion.
--mark

How can I perform the conversion of pdf files in Cyrillic script to Word files in Cyrillic script. The pdf file is too small for me to read right now. Julyan Watts

How can I perform the conversion of .pdf files in Cyrillic script to Word files in Cyrillic script. The .pdf file is too small for me to read without a magnifying glass, and the document is more than one thousand pages.

This answer was not helpful. First of all, I could not find "tech specs"
anywhere on the Acrobat 11 homepage. And secondly I purchased this software
for the specific purpose of converting .pdf files to Word. It was only
after I had completed the purchase that I learnt that Acrobat does not
permit the conversion of .pdf files in Cyrillic to Word files in Cyrillic.
I feel that Acrobat should have provided this crucial information before I
allowed my credit card to be debited. That is why I am now asking for my
money back. But thanks for your attempt to solve my problem, even if it was
not successful.
Julyan Watts

HT1766 I have the latest version of iTunes. When I plug my iPhone into the computer, it never comes up under the "Devices" tab in iTunes. How can I perform a restore/backup if it won't come up under "Devices" ?

I have the latest version of iTunes. When I plug my iPhone into the computer, it never comes up under the "Devices" tab in iTunes. How can I perform a restore/backup if it won't come up under "Devices" ?

See:
iPhone not recognized in iTunes for Mac
iPhone not recognized in iTunes for Windows

I have about 10000 images of different persons with dimension of 640*480. I wan to crop face from these images to dimension of 200*280. The location of face varies in differnt pics. So, please let me know step by step how can I perform this using the Ligh

I have about 10000 images of different persons with dimension of 640*480. I wan to crop face from these images to dimension of 200*280. The location of face varies in differnt pics. So, please let me know step by step how can I perform this using the Lightroom software. Also I wan to know what should be the aspect ratio to do so.Thank you in advance

The aspect ratio should be set to 200x280, or equivalently 5x7.
I don't think it is possible to do the cropping automatically in Lightroom, you'd have to do this image by image to crop the faces correctly.

In sqlserver 2005 there short cut ctrl+N, how can i perform same thing in sqlserver 2008 r2

In sqlserver 2005 there was short cut ctrl+N, how can i perform same action in sqlserver 2008 r2

In sqlserver 2005 there short cut ctrl+N, how can i perform same action in sqlserver 2008 r2
ctrl+N still available in SQL Server 2008 R2, please refer below article for list of shortcut keys.
http://technet.microsoft.com/en-us/library/ms174205.aspx
Also refer below article for how to customize shortcut keys.
http://technet.microsoft.com/en-us/library/ms174178(v=sql.105).aspx
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
Praveen Dsa | MCITP - Database Administrator 2008 |
My Blog | My Page

HT2518 I migrated from a PC to a Mac Book Pro. The contacts transferred over to the Mac along with many contacts that I had deleted sometime ago. Also some contacts did not transfer at all. How can I perform a correct and up to date migration of my cont

I migrated from a PC to a Mac Book Pro. The contacts transferred over to the Mac along with many contacts that I had deleted sometime ago. Also some contacts did not transfer at all. How can I perform a correct and up to date migration of my contacts?

well no reply from the community. sniff- do i stink!? - probably a little bit. If i have lost all that data then I'm gonna really really pong.
Any ways i have purchased a 1tb usb HDD and have managed to duplicate the dmg file onto it. however still unable to mount the **** thing. so now i have ordered disk warrior which will be in my possession tomorrow.
fingers toes eyes crossed.

How can I get iTunes to display the tracks from a CD in their original (album) order?

To be absolutely honest, I don't really understand what this box is for, so I shall just use it to repeat and expand on my question. (I have already sent a "Feedback" comment on the same topic).
How can I get iTunes to display the tracks from a CD in their original (album) order?
It seems to me that there is something very basic wrong with the way iTunes handles CD Tracks.
Professionally produced CD tracks are seldom if ever in a randomised order. Why then does iTunes seem unable to display the tracks in the order they appear on the original CD source - whether from a personally owned CD or from a download from the iTunes Store?
Some music demands a specific, non-alphabetic sequence in order to make sense. Why does it seem that iTunes only offers Alphabetic, or reverse alphabetic order - both of which make a nonsense of the original, often intended order of tracks?
Why not replace the so-called "cover-art" in the bottom left hand corner if the iTunes window - which, while it may look attractive to some, gives the barest of information concerning the original disc, with a list of the original CD tracks in their original order, so that the user can easily reestablish the order in which they should be played.
As I would expect legibility might be a problem with doing this, why could not the original contents, (in their original order), at least, be displayed when the "cover art" is double clicked-on - the result of which at present gives me an enlarged version of the "Cover Art". While on the subject of the contents of the source disc, what about all the album notes which someone takes trouble to write in order to increase the appreciation of the music on the CD and the listener's general background knowledge of the artists involved. Such notes, it seems to me, have considerable intrinsic value in their own account. I would, I think, normally be prepared to buy such "Sleeve notes" - so long as a "taster" was supplied (as it is for the music) - for something like the cost of a single 'Tune" on iTunes.
These two aspects let Apple iTunes down enormously, in my opinion. I think that by chopping even quite protracted sequences of music up into bits does no one any favours - except perhaps Apple's already quite substantial bank balance. People have to be aware that two and a half, to three and a half minutes is a very short time to develop a piece of worthwhile music, and that there are many, many composers, not all of whom are alive today who have written music that huge masses of mankind value for the enrichment of their lives and the human condition in general.
Please make the viewing of iTunes tracks in their correct order by default possible. By all means have the alphabetical variations available as offering a different approach to the music, but not the sole approach to it - PLEASE.
Frustratedly yours
Alan Whitaker
PS I work at my old 24" iMac Intel Core 2 machine which runs OS "Tiger" - because it is more beautiful to look at, the screen is more pleasant to work on, and because, in some ways it is more capable (it will run FreeHand MX without needing a "patch"), than my more recent 21.5" which runs "Snow Leopard". (I don't find it that much slower, either).

Dear Mike
Thanks for the support. I am utterly amazed that after all the hype about how good iTunes is that it cannot play a downloaded CD in the correct order, and that what that order should be is not available directly from within one's own iTunes installation. (I know that one can go back to the iTunes Store to check what the order should be, but having downloaded the tracks surely iTunes is clever enough to retrieve this important information.
My iTunes to differ from yours in that I have also noticed that it seems unable to download copies of my "talking books" in the correct order either. But in my case it downloads them - from a CD - in order, but with the first track downloaded first - so that it appears at the bottom of the column of tracks so that it would get played last! (At least this is, while being inexplicable, a relatively "logical" bit of blundering and because of this is relatively easy to put right!).
I like many genres of music, some of which are not really programmed except perhaps by the artist performing them. I know that Frank Sinatra was very careful to programme his album songs to obtain a particular effect and in relation to the keys of the music. iTunes presumes to know better.
Film scores may be totally randomly put together, in some cases, but in others the order is vital to one's appreciation of the music as a whole and how it relates to the plot of the film.
In symphonic music most works are divided into sections and are conceived by the composer that way. Some individual sections may gain a life of their own if played separately, but they are never complete in the sense that the composer envisaged them without being placed in their proper context.
Opera and probably most choral music too, is similar except that the words may well become meaningless if the order is changed at the whim of a piece of ill-written computer code, while ballet music has to be heard totally within its sequential context or it becomes meaningless.
Finally, I would venture that iTunes, by jumbling up the order of the tracks as recorded on a CD, does an immense disservice, not only to the music on a particular CD, but to music in general, by expressing everything in terms of "Songs" - which it seems to interpret as stand-alone items of between 2 and 4 minutes whatever the genre. Even the way the iTunes publicity speaks of how many "songs" it can store instead of how many minutes or hours of recorded sound. This has to be another brick in the wall of "dumming-down" of people's expectations, and the shortening of their attention spans.
I don't know about anyone else, but I feel betrayed by Apple over this. Perhaps the look, feel and general presentation of an item are not the most desirable features of a consumer product. Maybe it should be judged more on it fitness for the purpose for which it was sold. There is one other possibility - that Apple are trying to redefine "Music" - and that everything that lasts longer than about 3.5 minutes or is in the form of what could for want of a better term be called symphonic in the broadest sense is something else - not "Music" within Apple's new definition, at all!
Well that's off my chest! now I can get down to creating some sort of order in my iTunes Libraries, knowing that I have to reconsult all the sources in order to confirm the source playing order.
Anyway thanks again. At least I know that it is not just me
alanfromthatcham

Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

How can I perform a "jump" or a "goto" from a sequence frame to a previous one?

Similar Messages

Maybe you are looking for