How can I play the whole album, when I double click on the album it only plays the first track?

How can I play all tracks on an album, when I double click on the album it only plays the first track?

Make sure all the tracks are check-marked.

Similar Messages

How can I print a whole email document and not a "screen shot" like I get in the Print Preview option.

How can I print a whole email document and not a "screen shot" like I get in the Print Preview option. I'd like to print from "file" and print" like I can on other browsers (IE, for example). When I try to print from Firefox it grabs all my info (file folders, etc.) from the left side of the page. I need just the email information, not the entire screen information. Thank you!
-Bruce

I agree; I should, but I can't :) I have an orange Firefox drop down that I go to to print, and it allows me to select "print", "print preview" and "print setup", where I can change the margins. It always defaults to a full screen shot (I use Yahoo) and does not show just the email. I don't need to print what is on the left side of the screen or anything other than the email (I can achieve these things by using file-print from IE, so I know it is doable, and I am still going into Yahoo and using their email when I do it).
Hope this helps. I'm not a fan of IE, but I really don't like the print properties I'm getting here (I'm a long time Mozilla user, but I'm losing too much info with this option and can't afford that anymore).
Thanks for the help!
-Bruce

When using iphoto I can view the photos but when I double click on a photo it becomes a black box with a white circle on the screen

When using iphoto, I can view the photos but when I double click on 1 specific photo it enlarges to a black box with a large white circle in it...doesn't matter which photo I click on the end result is the same...black box with a white circle.

Hello michelefox17
It's sounds like you may need to rebuild your iPhoto Library. The article below has the steps on how do that.
iPhoto 6 and later: Rebuilding the iPhoto library
http://support.apple.com/kb/ht2638
If your issues persist then you may want to contact Apple Support
Contact Apple Support
http://www.apple.com/support/contact/
Hope that help,
-Griff W.

I have photos on a cd which I'm trying to open . If I click on them I can see the picture in the preview, but when I double click it doesn't recognise the picture. They are all in .jpg format. Tried copying them but it said some data cannot be read.

I have photos on a cd which I'm trying to open . If I click on them I can see the picture in the preview, but when I double click it doesn't recognise the picture. They are all in .jpg format. Tried copying them but it said some data cannot be read. The files exist but I just can't seem to view them

Select one and hit the Space bar to view it in QuickLook. Use the forward arrow keys to move from file to file. If the file can't be viewed in the QuickLook mode then the file is damaged and probably can't be copied or moved.
You could try a photo file recovery application like MediaRECOVER which can scan the memory card and tell you what files, if any, can be recovered before you have to purchase it.
OT

When i double click a photo in iphoto to edit, the screen goes black

when i double click a photo in iphoto to edit, the screen goes black. I'm using 10.7.5 with iPhoto 9.4.2. Can anyone help?

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

HT1338 I see "resume" on the Mavericks, but I can't get it to reboot when I double click on it.

I believe I was in the middle of booting up Mavericks, but stopped to double check, and now it says "resume" and I don't have the blue bar, even after double clicking.

When following Eric's instructions, ignore the "Slide to power off" verbiage if it appears.
This procedure will not result in loss of apps, data or settings.

Re ios7 update for ipad2. How do you stop all sites showing when you double click bottom button?

Re ios7 update - when I double click bottom button all sites visited come up as you scroll across screen. How can I ensure that no sites are shown or how do I delete sites visited?

Double clicking the Home button brings up multitasking. These are all the apps that are open in the background. You can close them by swiping the app preview page up to the top of the screen.
If you mean Safari websites, tap the tabs button (bottom right) and swipe each tab to the left to close them.

My library is showing up in ITunes but when I double click a song it does not play

My library is showing up in ITunes but when I double click on a song it does not play

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I am using iphone4s with iOS 7 and now I cannot delete applications from the home screen, when I double click the item it didn't shows the'x' button

Hi,
I am using iphone4s & now I updated with ios7 after that I cannot delete apps from home screen. Earlier when we double click the apps then it will wiggling & 'x' button will appear now it isn't so I need solution for this
Thanks,
Binoy

http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf

My Idvd is made and works just fine on the computer, but when I try it on my TV it only plays the intro theme, it never starts the actual video. How can I correct this?

I have made my DVD and it plays fine on the computer. When I try to play it on a TV, the intro theme shows, but I cannot get it to play the movie...any suggestions?

Hi
First ideas I got are
• Use of Cheap DVD brand - I only use Verbatim (due to more organic dye in these)
• Burn speed not reduced to x4 - I do
• Use of DVD+R - old DVD-players don't work OK with these
• Free space on Start-Up hard disk to low - My minimum is 25Gb free space on this one (others of no interest)
Yours Bengt W

Can anyone please tell me why when i put my music on shuffle it only plays a handful (that being 4 or 5)songs then stops even if its in the middle of a song, then wont let me play anything unless i exit Itunes completely and then re-open Itunes????

Can anyone tell why my Itunes will only play 5 or 6 songs on shuffle then stop even in the middle of a song, and the only way to fix it is to exit Itunes completley and reopen it?????

This is in regards to a 4th gen 40gb clickwheel ipod.
Hi, i've also been having a very similar problem with my ipod as well. I find that regardless of which windows-based pc i use (either my xp laptop @ home, or my win2000 desktop @ work) windows and itunes refuses to recognise my ipod. In windows explorer it will show it as a removable drive, but if i click on it, windows freezes. If I try to disconnect it, I cant because windows keeps reporting that 'the device is being used, try disconnecting later' and so then i shut down my laptop to disconnect it safely.
Lately, like you, i've also noticed that clicking sound it makes. It happens when i connect my ipod to my computer - like the drive inside it is constantly restarting or something, and i get it when i'm playing / charging it in my dock. I've also noticed that when it's playing whilst charging, it just freezes on a song, then skips a couple of songs.
I've just discovered the disgnostic tools on my ipod, so i think i'll run a couple of tests (ie HDD scan) and depending on the outcome, i'll go visit the apple store.

How can I stop cookies from loading when I right-click on a bookmark in show all bookmarks?

Whenever I right-click on a bookmark in show all bookmarks cookies try to load. How can I prevent this from happening?

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

HT1430 How do I clear out the old windows when I double click? We used to hold an icon at the bottom of the screen and touch the x's to delete.

How do I delete old open windows. Before the upgrade, I held an icon til it wiggles, then touched the x to delete.

Double click the home button, then the material above the icon, swipe that up and away.

Value of the previous cell when I double click a cell in ALV Grid.

Hi !
Suppose I have an internal table GT_ITAB and I use ALV Grid to print it on the screen. The colums are as below:
Invoice No Invoice Data Customer No Amount
90001231 15.01.2009 100024 5
Customer No Fields is Hot Spot and when I click it uses Call Transaction 'FD10N' and Skip First Screen.
But the Problem is that :
Callback subroutine that is defined for "i_callback_user_command" receives the input and
p_selfield type slis_selfield structure has the value by means of p_selfield-value.
Problem : How can I get also the value of Invoice Data Cell. I need "15.01.2009" to set the Year field of FD10n.
I know that it is possible because SAP has examples of it.
Please advice.
Erkan VAROL.

Hi ,
In teh structure slis_selfield there is a field tabindex , you can get the index of the record selected from this field and use this to read the internal table being displayed in the alv to get the entrired row.
Regards
Arun

How can i show details in ALV GRID with double click in a row?

Hello, ich try to show the details of a row with double click in the line,
but it doesn't work!?
I have a eventhandler for doubleclick and the program run this code, but what i have to do, to show the details!?
I try it with some methods like cl_gui_cfw=>set_new_ok_code, ...
i think about the methods cl_gui_alv_grid->show_detail, but this method is private,
i can create a class with inheritance of the cl_gui_alv_grid class and try this method!?
Have anybody any ideas!?

Hello Lars
The following sample reports shows an ALV list with company codes. Double-clicking on any company code will open a second ALV list displaying all customers.
*& Report ZUS_SDN_ALVGRID_EVENTS_1
REPORT zus_sdn_alvgrid_events_1.
DATA:
gd_okcode        TYPE ui_func,
gt_fcat          TYPE lvc_t_fcat,
go_docking       TYPE REF TO cl_gui_docking_container,
go_docking2      TYPE REF TO cl_gui_docking_container,
go_grid1         TYPE REF TO cl_gui_alv_grid,
go_grid2         TYPE REF TO cl_gui_alv_grid.
DATA:
gt_t001          TYPE STANDARD TABLE OF t001,
gt_knb1          TYPE STANDARD TABLE OF knb1.
*       CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
    CLASS-METHODS:
      handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
        IMPORTING
          e_row
          e_column
          es_row_no
          sender.
ENDCLASS.                    "lcl_eventhandler DEFINITION
*       CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
*   define local data
    DATA:
      ls_t001     TYPE t001,
      ls_col_id   TYPE lvc_s_col.
    CHECK ( sender = go_grid1 ).
    READ TABLE gt_t001 INTO ls_t001 INDEX e_row-index.
    CHECK ( ls_t001-bukrs IS NOT INITIAL ).
    SELECT * FROM knb1 INTO TABLE gt_knb1
      WHERE bukrs = ls_t001-bukrs.
    IF ( syst-subrc NE 0 ).
      MESSAGE 'No customers found' TYPE 'S'.
    ELSE.
*     Trigger PAI of dynpro '0100' and set new ok-code
      CALL METHOD cl_gui_cfw=>set_new_ok_code( 'CALL_SCREEN_0200' ).
    ENDIF.
ENDMETHOD.                    "handle_hotspot_click
ENDCLASS.                    "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM t001 INTO TABLE gt_t001.
REFRESH: gt_knb1.
* Create docking container
CREATE OBJECT go_docking
    EXPORTING
      parent                      = cl_gui_container=>screen0
      ratio                       = 90
    EXCEPTIONS
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_docking2
    EXPORTING
      parent                      = cl_gui_container=>screen0
      ratio                       = 90
    EXCEPTIONS
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create ALV grid
CREATE OBJECT go_grid1
    EXPORTING
      i_parent          = go_docking
    EXCEPTIONS
      OTHERS            = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_grid2
    EXPORTING
      i_parent          = go_docking2
    EXCEPTIONS
      OTHERS            = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER:
    lcl_eventhandler=>handle_double_click FOR go_grid1.
* Display data
CALL METHOD go_grid1->set_table_for_first_display
    EXPORTING
      i_structure_name = 'T001'
    CHANGING
      it_outtab        = gt_t001
    EXCEPTIONS
      OTHERS           = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_grid2->set_table_for_first_display
    EXPORTING
      i_structure_name = 'KNB1'
    CHANGING
      it_outtab        = gt_knb1
    EXCEPTIONS
      OTHERS           = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
CALL METHOD go_docking->link
    EXPORTING
      repid                       = syst-repid
      dynnr                       = '0100'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_docking2->link
    EXPORTING
      repid                       = syst-repid
      dynnr                       = '0200'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* ok-code field = GD_OKCODE
CALL SCREEN '0100'.
END-OF-SELECTION.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
    WHEN 'BACK' OR
         'END' OR
         'CANC'.
      SET SCREEN 0. LEAVE SCREEN.
    WHEN 'CALL_SCREEN_0200'.
      go_grid2->refresh_table_display( ). " necessary
      CALL SCREEN '0200'.
    WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
Regards
Uwe

How can I play the whole album, when I double click on the album it only plays the first track?

Similar Messages

Maybe you are looking for