How can I port an existing Tomcat (JSP) application in SAP Netweaver 2004s

Hi All,
I want to port an existing JSP application (using Tomcat as Web server) in SAP Web AS 6.40.
Please any one suggest me.
Eagerly looking forward to your reply......
Thanks and Regards
Avijit Dhar

Hi,
The maximum number of work processes depends on several things like the below.
1) Majorly on Your primary Memory
2) Hardware capacity
3) Operating systems
4) SAP version as well...
You need to calculate the work processes with your primary memory.
Every work process should take 150 mb space on memory.. so you need to increase the work processes that should be campatible with your primary memory.
And please read the OSS notes as suggested by our frnds then go ahead with your rquirement.
-Srini

Similar Messages

How can I improve performance for BC4J/JSP-application

Hi,
I have developed a JSP-Applikcation with the master-detail views. This Application has been implemented
as SSO enabled web portlet into portal. Whenn I click on a row retrieved from the master view (Master.jsp), it take 15 seconds
until the associated data in detail view will be displayed on the other window(Detail.jsp). The master table has about 2500 records and detail table about 7000. (Other case: it takes 2 seconds for 162 rows (master) and 228 rows (detail) respectively)
In Master.jsp I set rangesize = "10" to reduce data loading time.
======================== master.jsp =================================
<jbo:DataSource id="dsMaster appid=testAppId viewobject="MaterView" rangesize="10">
<a href="detail.jsp?RowKeyValue=<jbo:ShowValue datasource="dsMaster" dataitem="RowKey"/>">
Here Click
</a>
==================================================================
Because all records from master view have firstly to be retrieved to locate right row, I set rangesize="-1" in detail.jsp. Consequently this leads to a lower performance.
When rangesize="20" sets instead rangesize="-1", The performance is good, but the wanted Data from detail view are not displayed if the records of master view cliked on ist not in this range.
======================== detail.jsp ======================================
<jbo:DataSource id="dsMaster appid=testAppId viewobject="MaterView" rangesize="-1">
<jbo:RefreshDataSource datasource="dsMaster">
<jbo:Row id="msRow" datasource="dsMaster" action="Find" rowkeyparam="RowkeyValue">
<jbo:dataSource id="dsDetail" appid="testAppId viewobject="DetailView">
======================================================================
Is my programming logic not to be suited for the high performance?
How can I improve the performance, if it is so?
Many thanks for your help.
regards,
Yoo

http://forums.adobe.com/thread/1369260?tstart=0

How to use debug my jdevloper devloped jsp applications using tomcat 4.0?

hello,
how to use debug my jdevloper devloped jsp applications using tomcat 4.0?
how to run with using tomcat path with browser?
can any one help?
thanks
pullareddy

Hi Pullareddy,
Charles' answer will work for Servlets in Tomcat, but debugging JSPs is a bit more complicated than debugging Servlets.
Here's what you need to do:
(I don't have Tomcat, so I don't know the details of Tomcat configuration files and I can't guarentee that Tomcat provides the flexibility so that you can configure it for debugging JSPs. Each application server is configured a bit differently. Hopefully you can adjust the following instructions to Tomcat.)
1. You need to replace Tomcat's JSP engine with OJSP and you need to setup debugging parameters for OJSP.
This is not specifically in the JDev documentation, but you may be able to apply the information found in the topic "Remote Debugging in OC4J".
Here are some tips:
A. You'll probably need to specify the following jars in some Tomcat config file: ojsp.jar, ojsputil.jar, xmlparserv2.jar, ojc.jar, and jdev-rt.jar.
B. The OJSP class name is oracle.jsp.runtimev2.JspServlet.
C. The debug parameters are:
debug_mode = true
developer_mode = true
encode_to_java = true
emit_debuginfo = true
jspjavacompiler = oracle.jdevimpl.jsp.JspOjcCompiler
2. You need to make Tomcat start the Java command with debugging options. (This is what Charles was talking about. One of the debug options is -XXdebug). This is in the JDev documentation in the topic "Starting a Java Process in Debug Mode". Please read that documentation help topic.
3. You need to delete any old .java or .class files which were created in the past for your JSP. If you leave old .java or .class files around, then the debugger may not be able to stop at breakpoints in your JSPs. So, be sure to clean up old files.
4. Set your project settings for remote debugging. This is on the Debugger - Remote panel in the Project Settings dialog box. You probably want either Attach to OJVM or Attach to JPDA. Which radio button you choose depends on what command line options you specified in step 2.
-Liz

How can I creat a folder by jsp

import java.io.*;
class folder
     public static void main(String args[])
          folder foIns = new folder();
          foIns.makeDir("E:\\test");
     public static void makeDir(String dir)
File d = new File(dir);
if (!d.exists()) {
d.mkdir();
I can creat a folder by java , but how can I creat a folder by jsp??
thanks all ^_^

import java.io.*;
class folder
     public static void main(String args[])
          folder foIns = new folder();
          foIns.makeDir("E:\\test");
     public static void makeDir(String dir)
File d = new File(dir);
if (!d.exists()) {
d.mkdir();
I can creat a folder by java , but how can I creat a
folder by jsp??
thanks all place this class file in web-inf/classes of your web application,and in jsp page use
<jsp:useBean id="fold" class="your complete class name" scope="page"/>
<%
fold.makeDir("dir name");
%>

How can I checkout an existing file from CVS without going through the wiz

How can I checkout an existing file from CVS, that is not already in my local jdev, without going through the wizard and checkingout everything?

You can't. AI doesn't produce .PLT files.

How can I port my library from one pc to another?

How can I port my music library from my pc to my new windows tablet?

theres are three ways
clicking on music in itunes, hitting control A on the keyboard to select all on the main list of all songs and then dragging them to an external hard drive. and then dragging them from the external hard drive to your other itunes computer.
im not sure if that works on windows. i know it works on mac
second way is to find the directory of itunes library and copying that to a external hard drive and then going to your otther computer and clicking on "import library" and giving the location of the directory on the external hard drive
third way is enable home sharing on both computers , by clicking on file, librsry, turn on home sharing and entering your apple id this wil let you go to the itunes server from the other computer, let you select all songs and then import them to your library via your home network . again im not sure if this works on windows, but it does on macs
if i remember right the first way was faster. the second way would also import all your videos and movies and tv shows too
if you use the first or second methods make sure to click on file , organize library, consolodate library after the songs are copied to make sure they were actualy copied from the external drive. if the library is not organized and consolidated, thte songs will not be available if you eject the external drive

How can I copy my existing contacts from 1 Apple ID to a new one?

How can I copy my existing contacts from 1 Apple ID to a new one?

Click here and pick the option which best fits your situation. Rented movies can only be moved through the iPod and will not play on the new computer if any other method is used.
(98456)

How can I add an existing cfm page to a project?

CFB3 Question: How can I add an existing cfm page to a project? I created a project and copied a file into the project folder but I can't seem to find a way to add the cfm file into the project.

@Carl - Well heck, yes I did... But after reading your response I went back and tried right-clicking on and refreshing different things and what worked was right-clicking on the project name in the Navigator window and then clicking on refresh in that context menu.
Thank you Carl!

How can i get my existing itunes account to recognizes a new ipod

How can I get my existing Itunes account to recognize a new ipod?

just plug it in. there would be on-screen instructions to help with the set up.
also consult the user guide that came with the device.

I want to order a second copy of an iPhoto book. Thought created in the smaller format only the larger format is showing. How can I switch an existing iPhoto book back to the smaller format?

I want to order a second copy of an existing iPhoto book. Though created in the smaller format now only the larger format is showing. How can I switch an existing iPhoto book back to the smaller format?

To change a book size duplicate it (select the book in the source pane and press command and D) since text flow and picture placements can change due to the size differences - then click on change themes, select the same theme and the new size
check it carefully
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

How can I convert an existing table to IOT

Hi,
My Oracle version is 10.2.0.4
Below is my structure of my test_table .
It has 1141580 rows.
I want to convert this into index Organized table. It has no secondary indexes.
How can I convert an existing table to IOT.
CREATE TABLE test_table (
   Column1             NUMBER        NOT NULL,
   Column2             DATE          NOT NULL,
   Column3             VARCHAR2(100) NOT NULL,
   Column4             VARCHAR2(8)   NULL,
   Column5             VARCHAR2(40) NOT NULL,
   Column6             VARCHAR2(3)   NULL,
   Column7             NUMBER        NOT NULL,
   Column8             NUMBER        NULL,
   Column9             VARCHAR2(32) NULL,
ALTER TABLE test_table
ADD CONSTRAINT test_table_pk2 PRIMARY KEY (
    Column1,
    Column2
USING INDEX
    STORAGE (
      INITIAL   30720 K
ALTER TABLE test_table
ADD CONSTRAINT test_table_cons1 FOREIGN KEY (
    Column1
) REFERENCES test_table2 (
    Column1
/

alter table doesn't allow to change the organization of a table.
So the logical answer to your question is
You can not
and your question
redundant.
As most other questions here.
So the answer should have been
- create a new table
- insert all rows
- drop the old table
- rename the new table
Oracle is not about rocket science.
Oracle is about reading documentation and using brains.
If you do that, maybe, one day, you will be a bigboy.
If you keep asking redundant questions you will remain a littleboy.
Sybrand Bakker
Senior Oracle DBA

How can I change my existing Creative Cloud Student and Teacher Subscription to Photoshop CC offer?

How can I change my existing Creative Cloud Student and Teacher Subscription to Photoshop CC offer?
I have been on the online chat waiting for 6 hours now. and I tried calling with no luck either.
I would like the $9.99 Photoshop CC offer instead.

Hi Joseph
I've cancelled your existing plan so you can sign up for the Photoshop Photography plan - offer extended until December 8th.
Thanks
Bev

How can I insert an existing ApDiv into a tab in the Spry Tabbed Panel?

I have 5 of them all containing nested Apdiv within nested ApDivs (a long storie ) that I would like to insert into 5 tabs in the Spry Tabbed Panel.
Please help.

"Hi Gramp,I realize I have made hard work for myself but I really don't know any better. I also realize now that taking on this project may have been a mistake :-)I taught myself how to use the design side of Dream Weaver. These five ApDivs were created in the content area of the spry tool and it worked fine. (yes a lot of work though)For the first time I looked at the code side. I wanted to try to bring a peace of code from another page for something unrelated and when it didn't work I took it out and without noticing, deleting a line from the Spry tool.Of course like a classic newbe I was working without a backup copy so here I am. Loosing hours of tedious work and on the verve of tears :-)I do have some questions though. My APDiv
What does "apDiv1" stands for and what does "My APDiv" stands for?Is the only thing I have to do is changing this line for my five ApDivs and paste it in the appropriate places in the code? Thanks again,Gilaad
Date: Sat, 16 Jun 2012 20:39:07 -0600
From: [email protected]
To: [email protected]
Subject: How can I insert an existing ApDiv into a tab in the Spry Tabbed Panel?
    Re: How can I insert an existing ApDiv into a tab in the Spry Tabbed Panel?
    created by Altruistic Gramps in Spry Framework for Ajax - View the full discussion
You have really made hard work for yourself by using APDiv's. I suppose it can be done, but I would not. To answer your question, I have create an example as per#apDiv1
My APDiv
Content 2
Tab 1
Gramps
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4498679#4498679
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4498679#4498679. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Spry Framework for Ajax by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I downloaded itunes on a new computer and signed in, how can i get my existing music, etc onto my library without deleting it on my ipod, if I synch it will delete all my stuff and i will have nothing on my ipod

I downloaded itunes on a new computer and signed in, how can i get the existing music, etc from my ipod to my library without losing it? HELP!

Copy everything from your old computer, or your backup copy of your old computer, to your new one.
The ipod is not a backup/storage device.

When I opened iweb it opened as a file I deleated. I have a published website with godaddy and would like to update. How can I open the existing iWeb app to the site that is already published?

When I opened iweb it opened as a file I deleated. I have a published website with godaddy and would like to update. How can I open the existing iWeb app to the site that is already published?

You cannot retrieve the already published site as iWeb CANNOT open it - it has no import facility.
You need your domain.sites file, which you can find under User/Library/Application Support/iWeb/domain.sites. You do not need any kind of account for this because it is your domain.sites file that resides on the hard drive of your Mac anyway. Find this file and you can alter your website.
Use a spotlight search to try and find it and if this does not work you can download something called Find Any File. If you really can't find it, then you'll have to start from scratch because iWeb cannot open a site that is already published.

How can I port an existing Tomcat (JSP) application in SAP Netweaver 2004s

Similar Messages

Maybe you are looking for