How can I preserve display string (convert DOB to Age) upon excel export?

I am using the following code to convert DOB to age within Display String (Format Field/Common tab):
if
//months
(datediff('yyyy',{CDCLIENT.DOB},currentdate)-(if datepart('y',currentdate)>datepart('y',{CDCLIENT.DOB}) then 0 else 1))<2 then
totext(datediff('mm',{CDCLIENT.DOB},currentdate),0,'') & ' months'
else
//years
totext((datediff('yyyy',{CDCLIENT.DOB},currentdate)-(if datepart('y',currentdate)>datepart('y',{CDCLIENT.DOB}) then 0 else 1)),0,'') //& ' years'
When I export to excel/csv/ttx.. it doesn't export the display string (Age), but reverts back to the DOB. How do I preserve this upon export?

Hi Dominic,
The 'display string' formatted values are not exported to Excel Data Only.
Create a 'formula field' as a workaround.
-Abhilash

Similar Messages

Dear sir! How can i judge a string's encoding?

Dear sir! How can i judge a string's encoding?
Now i receive a string !but i do not known what encoding this string is? I want a method to judge the encoding.
Thank you!

Strings in Java are by definition in Unicode. If you want to convert them to a specific encoding, you can do this:
String yenSign = new String("\u00A5");
byte[] yenByteArray = yenSign.getBytes("UTF8");
Now yenByteArray is encoded into bytes using UTF-8.

How can I send multiple string commands into a VISA write?

Hi Fellow LabVIEW users
I am very new to LabVIEW (2.5 months) so please forgive me if my lingo is not up to par.
How can I send multiple string commands to a VISA write. For example each string command looks like this
1) 3A00 0000 0000 FFFF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0033 (Scenario 1)
2) 3A01 0000 0000 FFFF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0034 (Scenario 2)
3) 3A01 0000 0000 33FF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0067 (Scenario 3).
and so on and so forth. And there are a number of scenarios.
Each String scenario will give a different string output which will be interpreted differently in the front panel.
Right now I have to manually change the string commands on the front panel to give me the desired output. How can I do this without manually changing the commands i.e. hard coding each scenario into the block diagram?
Thanks, any feedback will help.
mhaque

Please stick to your original post.

Please, I have a PDF attachment in an email on Russian language, how can I open it and convert to WO

Please, I have a PDF attachment in an email on Russian language, how can I open it and convert to WORD (doc.) on Russian?

Hi Senior gal,
If you have purchased the ExportPDF subscription, then just save the PDF to your desktop and follow any of the two mathod mentioned in the article below to convert the PDF to word
http://forums.adobe.com/docs/DOC-2412
~Pranav

CS3 - How can I preserve Links and Hyperlinks in my INDB?

I am still pretty new to ID, so please speak slowly :)
My problem - I create an INDB that consists of several indd chapters. The chapters include numerous Links (to PNG & PSD images) and Hyperlinks both to Text anchors to other chapters within the INDB, as well as to URLs. I have all items saved on my local HD. Once complete, I do "Package for Print", check the Preflight report to make sure all is OK (it is) and then save the new INDB folder in a new location on my local HD. This all seems to work just fine, BUT if I move this packaged INDB folder (such as to a backup drive, or give to another worker that copies it to their HD), upon opening the INDB file, some links and Hyperlinks are broken.
It seems that these broken Links and Hyperlinks are still pointing to the original locations on my HD. But obviously not all are, since most links/hyperlinks DO work fine. The Hyperlinks to Text anchors within other indd chapters seem to typically break. Is there a way to force these to reference the packaged assets within the INDB folder? Seems ID would be smart enough to look there itself!
Also, I was creating some Hyperlinks as "cross referenced" - that is, I created a URL Hyperlink Destination in Chapter 1 indd and then created Hyperlinks pointing to it from other chapter indd in the book. I have learned that these ALWAYS break in the above scenario, so I started creating the URL destination within the same chapter indd and pointing to it there rather than across chapters. But this is just more work to keep re-creating the same URL destination in every indd!
I'll keep running into these problems since I need to share my finished INDB with other CS3 users. I also would like to be able to do a Save As of the INDB when creating a revised, newer version, but I see this also results in the new INDB links/hyperlinks still pointing to the original INDB's assets! Any way to make the Save As update the Links/Hyperlinks in the new INDB?
Thanks greatly for any insight. I can find no help in the Help on these issues!

The title of the post is this
How can I preserve row and column addresses on multiple cells at once in Numbers?
I restated the Question as follows
Can "Preserve Row" an / or "Preserve Column" be set on multiple cells at the same time.
In both cases it is not asked if multiple cells can be set to....
That is a given.
Step back a second... It is like selecting multiple cells and setting the text color of the currently selected cells to red. This can be done. More than one cell at a time modified because they are currently selected.
Whats is being asked is: if more than one cell is selected at the same time can the settings "Preserve Row" an / or "Preserve Column" be applied. No table I put up will help with that question.
YES or NO
If YES how?

How can I preserve row and column addresses on multiple cells at once in Numbers?

How can I preserve row and column addresses on multiple cells at once in Numbers 3.2.2? I do a lot of rearranging and sorting and want to reference cells in other sheets. After entering the formulas (example: '=Sheet1::Table 1::H126') I will sort the table and the formulas will not move with the sort. I think I can fix this by going cell by cell checking the 'preserve row' and 'preserve column' boxes when editing the formula. I want to avoid having to go one by one. I know that checking the boxes creates a formula like this: '=Sheet1::Table 1::$H$126' I have also tried entering this manually and filling down but it doesn't include the preservations (the $$) in the autofill. If there is another way to remedy my sorting problem that would also be welcomed!
THANKS!!

The title of the post is this
How can I preserve row and column addresses on multiple cells at once in Numbers?
I restated the Question as follows
Can "Preserve Row" an / or "Preserve Column" be set on multiple cells at the same time.
In both cases it is not asked if multiple cells can be set to....
That is a given.
Step back a second... It is like selecting multiple cells and setting the text color of the currently selected cells to red. This can be done. More than one cell at a time modified because they are currently selected.
Whats is being asked is: if more than one cell is selected at the same time can the settings "Preserve Row" an / or "Preserve Column" be applied. No table I put up will help with that question.
YES or NO
If YES how?

How can I save an edited converted file?

How can I save an edited converted (from PDF) file?

Hi alisonr1825446,
When you convert a PDF file to Word/Excel, it's automatically saved to your Acrobat.com online account. From there, you can download it to your desktop to edit it, and then save it. To download your file, log in to https://cloud.acrobat.com/files. Select the file, and then click the Download link at the top of the file list. Your file will be downloaded to the Downloads folder on your computer.
Please let us know how it goes.
Best,
Sara

How can I view/display webi reports

Hi,
We are in the eprocess of implementing BI 4.0. If we go in for webi reports, How can I view/display/publish webi reports?
We dont have SAP EP, only ECC.
Regards,
priyA,

Hi,
the BI product packages it's own web application. Reporting content is published securely and viewed 'online' through the BI LaunchPad (previously infoview)
Regards,
H

How can i air display the Screen from mac to the more than 3 iPads?

how can i air display the Screen from mac to the more than 3 iPads?
thanks

Energy Saver, you can keep the computer awake while the screen saver shuts the monitor off but I'm not sure that would do it for you.

How can i extract data strings (temp. press. rel.hum etc) using a Virtual interface through an RS-232 connection?

How can i extract data strings (temperature, pressure, relative humidity etc) using a Virtual interface through an RS-232 connection?

Try this. It is in LV 8.5.
Note the double % in the format string. This is so the % in the input string is treated as a percent rather than a code.
You may also have to work with the line feed characters in case they are different in the string coming in compared to how the string shows up in the web browser.
Message Edited by Ravens Fan on 02-12-2008 10:19 PM
Attachments:
Example_BD.png ‏4 KB
Untitled 11.vi ‏9 KB

How can i write a string into a specified pos of a file?

How can i write a string into a specified pos of a file without read all file into ram and write the whole file again?
for example:
the content of file is:
name=123
state=456
i want to modify the value of name with 789
(write to file without read all file into ram)
How can i do it? thank you

take this as an idea. it actually does what i decribed above. you sure need to make some modifications so it works for your special need. If you use it and add any valuable code to it or find any bugs, please let me know.
import java.io.*;
import java.util.*;
* Copyright (c) 2002 Frank Fischer <[email protected]>
* All rights reserved. See the LICENSE for usage conditions
* ObjectProperties.java
* version 1.0, 2002-09-12
* author Frank Fischer <[email protected]>
public class ObjectProperties
     // the seperator between the param-name and the value in the prooperties file
     private static final String separator = "=";
     // the vector where we put the arrays in
     private Vector PropertiesSet;
     // the array where we put the param/value pairs in
     private String propvaluepair[][];
     // the name of the object the properties file is for
     public String ObjectPropertiesFileName;
     // the path to the object'a properties file
     public String ObjectPropertiesDir;
     // reference to the properties file
     public File PropertiesFile;
     // sign for linebreak - depends on platforms
     public static final String newline = System.getProperty("line.separator");
     public ObjectProperties(String ObjectPropertiesFileName, String ObjectPropertiesDir, ObjectPropertiesManager ObjectPropertiesManager)
     //     System.out.println("Properties Objekt wird erzeugt: "+ObjectPropertiesFileName);
          this.ObjectPropertiesFileName = ObjectPropertiesFileName;
          this.ObjectPropertiesDir = ObjectPropertiesDir;
          // reference to the properties file
          PropertiesFile = new File(ObjectPropertiesDir+ObjectPropertiesFileName);
          // vector to put the param/value pair-array in
          PropertiesSet = new Vector();
     //     System.out.println("Properties File Backup wird erzeugt: "+name);
          backup();
     //     System.out.println("Properties File wird eingelesen: "+PropertiesFile);
          try
               //opening stream to file for read operations
               FileInputStream FileInput = new FileInputStream(PropertiesFile);
               DataInputStream DataInput = new DataInputStream(FileInput);
               String line = "";
               //reading line after line of the properties file
               while ((line = DataInput.readLine()) != null)
                    //just making sure there are no whitespaces at the beginng or end of the line
                    line = cutSpaces(line);
                    if (line.length() > 0)
                         //$ indicates a param-name
                         if (line.startsWith("$"))
                              // array to store a param/value pair in
                              propvaluepair = new String[1][2];
                              //get the param-name
                              String parameter = line.substring(1, line.indexOf(separator)-1);
                              //just making sure there are no whitespaces at the beginng or end of the variable
                              parameter = cutSpaces(parameter);
                              //get the value
                              String value = line.substring(line.indexOf(separator)+1, line.length());
                              //just making sure there are no whitespaces at the beginng or end of the variable
                              value = cutSpaces(value);
                              //put the param-name and the value into an array
                              propvaluepair[0][0] = parameter;
                              propvaluepair[0][1] = value;
                         //     System.out.println("["+ObjectPropertiesFileName+"] key/value gefunden:"+parameter+";"+value);
                              //and finaly put the array into the vector
                              PropertiesSet.addElement(propvaluepair);
          // error handlig
          catch (IOException e)
               System.out.println("ERROR occured while reading property file for: "+ObjectPropertiesFileName);
               System.out.println("ERROR CODE: "+e);
               // System.out.println("in ObjectProperties");
     // function to be called to get the value of a specific paramater 'param'
     // if the specific paramater is not found '-1' is returned to indicate that case
     public String getParam(String param)
          // the return value indicating that the param we are searching for is not found
          String v = "-1";
          // looking up the whole Vector
          for (int i=0; i<PropertiesSet.size(); i++)
               //the String i want to read the values in again
               String s[][] = new String[1][2];
               // trying to get out the array from the vector again
               s = (String[][]) PropertiesSet.elementAt(i);
               // comparing the param-name we're looking for with the param-name in the array we took out the vector at position i
               if (s[0][0].equals(param) == true)
                    //if the param-names are the same, we look up the value and write it in the return variable
                    v = s[0][1];
                    // making sure the for loop ends
                    i = PropertiesSet.size();
          // giving the value back to the calling procedure
          return v;
     // function to be called to set the value of a specific paramater 'param'
     public void setParam(String param, String value)
          // looking up the whole Vector for the specific param if existing or not
          for (int i=0; i<PropertiesSet.size(); i++)
               //the String i want to read the values in again
               String s[][] = (String[][]) PropertiesSet.elementAt(i);
               // comparing the param-name we're looking for with the param-name in the array we took out the vector at position i
               if (s[0][0].equals(param) == true)
                    //if the param-names are the same, we remove the param/value pair so we can add the new pair later in
                    PropertiesSet.removeElementAt(i);
                    // making sure the for loop ends
                    i = PropertiesSet.size();
          // if we land here, there is no such param in the Vector, either there was none form the beginng
          // or there was one but we took it out.
          // create a string array to place the param/value pair in
          String n[][] = new String[1][2];
          // add the param/value par
          n[0][0] = param;
          n[0][1] = value;
          // add the string array to the vector
          PropertiesSet.addElement(n);
     // function to save all data in the Vector to the properties file
     // must be done because properties might be changing while runtime
     // and changes are just hold in memory while runntime
     public void store()
          backup();
          String outtofile = "# file created/modified on "+createDate("-")+" "+createTime("-")+newline+newline;
          try
               //opening stream to file for write operations
               FileOutputStream PropertiesFileOuput = new FileOutputStream(PropertiesFile);
               DataOutputStream PropertiesDataOutput = new DataOutputStream(PropertiesFileOuput);
               // looping over all param/value pairs in the vector
               for (int i=0; i<PropertiesSet.size(); i++)
                    //the String i want to read the values in
                    String s[][] = new String[1][2];
                    // trying to get out the array from the vector again
                    s = (String[][]) PropertiesSet.elementAt(i);
                    String param = "$"+s[0][0];
                    String value = s[0][1];
                    outtofile += param+" = "+value+newline;
               outtofile += newline+"#end of file"+newline;
               try
                    PropertiesDataOutput.writeBytes(outtofile);
               catch (IOException e)
                    System.out.println("ERROR while writing to Properties File: "+e);
          catch (IOException e)
               System.out.println("ERROR occured while writing to the property file for: "+ObjectPropertiesFileName);
               System.out.println("ERROR CODE: "+e);
     // sometimes before overwritting old value it's a good idea to backup old values
     public void backup()
          try
               // reference to the original properties file
               File OriginalFile = new File(ObjectPropertiesDir+ObjectPropertiesFileName);
               File BackupFile = new File(ObjectPropertiesDir+"/backup/"+ObjectPropertiesFileName+".backup");
               //opening stream to original file for read operations
               FileInputStream OriginalFileInput = new FileInputStream(OriginalFile);
               DataInputStream OriginalFileDataInput = new DataInputStream(OriginalFileInput);
               //opening stream to backup file for write operations
               FileOutputStream BackupFileOutput = new FileOutputStream(BackupFile);
               DataOutputStream BackupFileDataOutput = new DataOutputStream(BackupFileOutput);
          //     String content = "";
               String line = "";
               // do till end of file
               while ((line = OriginalFileDataInput.readLine()) != null)
                    BackupFileDataOutput.writeBytes(line+newline);
          // error handlig
          catch (IOException e)
               System.out.println("ERROR occured while back up for property file: "+ObjectPropertiesFileName);
               System.out.println("ERROR CODE: "+e);
               System.out.println("this is a serious error - the server must be stopped");
     private String cutSpaces(String s)
          while (s.startsWith(" "))
               s = s.substring(1, s.length());
          while (s.endsWith(" "))
               s = s.substring(0, s.length()-1);
          return s;
     public String createDate(String seperator)
          Date datum = new Date();
          String currentdatum = new String();
          int year, month, date;
          year = datum.getYear()+1900;
          month = datum.getMonth()+1;
          date = datum.getDate();
          currentdatum = ""+year+seperator;
          if (month < 10)
               currentdatum = currentdatum+"0"+month+seperator;
          else
               currentdatum = currentdatum+month+seperator;
          if (date < 10)
               currentdatum = currentdatum+"0"+date;
          else
               currentdatum = currentdatum+date;
          return currentdatum;
     public String createTime(String seperator)
          Date time = new Date();
          String currenttime = new String();
          int hours, minutes, seconds;
          hours = time.getHours();
          minutes = time.getMinutes();
          seconds = time.getSeconds();
          if (hours < 10)
               currenttime = currenttime+"0"+hours+seperator;
          else
               currenttime = currenttime+hours+seperator;
          if (minutes < 10)
               currenttime = currenttime+"0"+minutes+seperator;
          else
               currenttime = currenttime+minutes+seperator;
          if (seconds < 10)
               currenttime = currenttime+"0"+seconds;
          else
               currenttime = currenttime+seconds;
          return currenttime;

How can I re-organize String lines

Hello My String consists of random lines. Every line has an priority number. Example of a String:
Done     id     pri     created          finished     description
     000     1     2006-12-11     -          job
x     001     2     2006-12-11     -     do this
     002     3     2006-12-11     -          work
x     003     0     2006-12-11     -          some
     004     2     2006-12-11     -          thing
     005     1     2006-12-11     -          reads
     006     0     2006-12-11     -          here
Every "token" is seperated by \t (done \t id \t ....\t 000 \t 1 \t 2006-12-12 \t...)
How can I organize the String and save it to another String so that pri-values are in a descending order:
Done     id     pri     created          finished     description
002     3     2006-12-11     -          work
x     001     2     2006-12-11     -     do this
004     2     2006-12-11     -          thing
000     1     2006-12-11     -          job
005     1     2006-12-11     -          reads
x     003     0     2006-12-11     -          some
     006     0     2006-12-11     -          here

I'm trying but I don't know what I'm doing
import java.io.*;
import java.util.*;
import java.util.ArrayList;
import java.util.Collections;
import java.util.List;
import java.util.Comparator;
public class Start {
public static void main(String[] args) throws IOException {
sort();
public static void sort() throws IOException {
     class Work implements Comparable {
     String id;
     int pri;
     String d1;
     String d2;
     String job;
     public Work(String id, int pri, String d1, String d2, String job){
          this.id = id;
          this.pri = pri;
          this.d1 = d1;
          this.d2 = d2;
          this.job = job;
     BufferedReader reader = new BufferedReader(new FileReader("Tehtava.txt"));
     //BufferedWriter writer = new BufferedWriter(new FileWriter("Tempo.txt"));
     String lookingFor3 = "-";
     String line = null;
     while ((line = reader.readLine()) != null) {     //---------------z
               String[]result = line.split("\t");
               List tasks = new ArrayList();
               if (result[4].equals(lookingFor) == true) {
               tasks.add(new Work(line));
               continue;
               public int getpri()     {
               return pri;          }
               public int compareTo(Object o)     {
               Work otherWork = (Work) o;
               return this.getpri().compareTo(otherWork.getpri());     }
          Collections.sort(tasks); //-------------------x
          System.out.print(tasks); //------------------x
          //reader.close();
}I don't know what but Where and I'm getting errors like:
<identifier> expected
for lines ------------x
illegal start of type:
for line -------------z

I've made a video about 3 minutes long but when i try to download it youtube it fails (-error 108) how can i fix it? convert? downsize? helppppp, i want to make full hd videos longer than 3 minutes long.

I've made a video about 3 minutes long but when i try to download it youtube it fails (-error 108) how can i fix it? convert? downsize? helppppp, i want to make full hd videos longer than 3 minutes long. i manged to upload a short 1:43 min video to youtube but the quility was poor compared to the camera a was using wich was hd?

I've made a video about 3 minutes long but when i try to download it youtube it fails (-error 108) how can i fix it? convert? downsize? helppppp, i want to make full hd videos longer than 3 minutes long. i manged to upload a short 1:43 min video to youtube but the quility was poor compared to the camera a was using wich was hd?

How can I add an audio file to each slide when I export to HTML Keynote 6.2

How can I add an audio file to each slide when I export to HTML Keynote 6.2
I am trying to create an audio slide show instead of a movie

Drag and drop one music files onto each slide then export. (File > Export > HTML)

I have a new IMAC 5k running Yosemite and when I log in I am asked a whole series of questions as to what keychain can access. How can I authorise all of these to be available upon login? Items concerned are such as "Talagent", "Messages agent" etc

I have a new IMAC 5k running Yosemite and when I log in I am asked a whole series of questions as to what keychain can access. How can I authorise all of these to be available upon login? Items concerned are such as "Talagent", "Messages agent" etc

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ First Aid
There are four checkboxes in the window that opens. Check all of them. if they're not already checked. Close the window.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.
If you use iCloud Keychain, open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device.

How can I preserve display string (convert DOB to Age) upon excel export?

Similar Messages

Maybe you are looking for