How can I programmably extract the project build information set in the project build specification. So I can then use the information in an 'About' dialog.
Extracting Project information
How can I programmably extract the project build information set in the project build specification.
So I can then use the information in an ‘About’ dialog.
Dave
In the labview\resource\appbuild folder their are some VI's that can deal with build specs! They return a variant containing the data!
It's the reason I build a variant probe.
Be aware that the build info is not present in th lvproj file of the built executable!
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Similar Messages
-
How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?
When talking about a specific image posting the image may be useful.
One can use a Layer Mask and add a white Layer underneath. -
I am trying to create a virtual engine within a timed while loop and am unable to get the loop to run at a speed of less than 1ms (I am currently using the Wait(ms) function). This does not however allow realistic engine speeds. How can I overcome this? I have access to a PCI-MIO-16E-4 board.
andyt writes:
> I am using a timed while loop and am unable to get the loop to run at
> a speed of less than 1ms (I am currently using the Wait(ms) function).
> How can I get a faster response?
>
> I am trying to create a virtual engine within a timed while loop and
> am unable to get the loop to run at a speed of less than 1ms (I am
> currently using the Wait(ms) function). This does not however allow
> realistic engine speeds. How can I overcome this? I have access to
> a PCI-MIO-16E-4 board.
Andy,
Unless you use a real time platform, getting extactly 1 ms loop rate
(or even less) is impossible. It starts getting troublesome at about
0.1 Hz for standard operating systems.
I'd tackle your problem with "if i mod 10 == 0 then sleep 1 ms".
Of
course this is jerky by design.
HTH,
Johannes Nie? -
In the new IOS 7, my IMessage and FaceTime won't let me log in using the correct Apple ID and password. How can I fix this?
Other users have reported same problem with 4G iPod/iOS 6.1.6 and I have not seen a solution. One user reported yesterday or the day before that it just started working again.
-
I've got 4 iPhones that got stolen and I could not locate then using the " find my Iphone App". How can I get them back?
only way is if the police find it I suppose
-
I changed ISP and used ms explorer to set up on to new ISP. Internet options has the new ISP address but Firefox does not pick it up and is still using the old ISP address. Can find no way to set firefox to new ISP address. How do I do it? edit
-> Tap ALT key or press F10 to show the Menu Bar
-> go to Tools Menu -> Options -> Advanced -> Network -> Connection section -> click '''Settings...''' button -> change these settings in accordance with Internet Options settings that work on MS Internet Explorer -> click OK
Check and tell if its working. -
How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
The system I'm have is a Mac-mini that had SL on it and no SuperDrive. I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
Step 2
After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
Step 3
After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive. -
How do I download the music from iTunes onto an old iPhone 3gs without affecting my iPhone 5? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my current iPhone. iTunes won't let me change the device name for the 3gs. I just want to use the old iPhone like an touch.
Hi littlemansa,
If I am understanding you correctly, it sounds like you are returning to an old iPhone that has been erased and you would like to set it up as a new device without restoring from a backup which would affect the name of your iPhone, as well as the contents therein. I have an article for you that can help you set up your iPhone as a new device, and that information can be found below:
How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
http://support.apple.com/en-us/HT4137
Basically, it seems like you may be stuck on a screen that is asking if you would like to restore your device from the backup that is filed under the name of your new iPhone, or if you would like to set up the device as a new device. I would suggest that you set it up as a new device to achieve your desired results.
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
I just down loaded itones to my computer, then bought a bunch of music. How do I add the songs to my mp3 player. When I go to "file" and then devices the button that says sync isn't availlible to push, so I cant put the music on my mp3??? Help
itunes will only sync with an ios device.
On the other hand, if you have a usb cord for your mp3 player, and you know what FOLDER your itunes music is located in (and for me its located at C:\Users\YOUR NAME HERE\Music\iTunes\iTunes Media )
you can just select that folder and copy it to your mp3 player.
typically when you first plug in something like an mp3 player you get a windows alert asking if you want to view the contents of the device- say yes. copy your itunes folder to the music folder on your mp3 player. -
I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???
I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.
-
Thanks for the help. Looked but not clear on what I am trying to do as being possible. Can I use an Airport Express to connect wireless to a Linksys Wireless Router, such that I can then use the Ethernet ports on the Airport to either connected to a PC wired, or even use a hub off the Airport Express to allow multiple wired connections to it?
I am not looking to have the Airport Express extend my wireless network, just connect to it and provide me wired connections in a different location from where my Linksys Route is located. Would prefer to replace Linksys with all Apple, but just not possible financially yet. Thanks for the help.If the AirPort Express Base Station (AX) is an 802.11n model, then yes, you can reconfigure it as a wireless Ethernet bridge. In this configuration, the AX would join the wireless network provided by the Linksys router and its Ethernet port would be enabled for either a single wired device or for an Ethernet hub or switch for multiple devices.
-
I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I overcome this?
I was already using 10.7. But only had the disc for 10.6.Sorry I am new to this. Am I in the right area? I am using my iPhone to make contact. I am worried.
-
I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.
See if the iPad will accept the password after you restart it. It's worth a try.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
You could also try a reset as well.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
Received adobe photoshop elements 12/adobe premiere elements 12 when I purchased a MacBook Pro. The macBook Pro does not have a DVD player it is sold separately. To install the program can I download a free trial version and then use the serial numbers from the set I received?
yes, that's exactly what you should do,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
I want to store movies on an SD disk, watch them on the way to Europe, then use the chip to record photos in my camera. I can't get the iPad mini to recognize the videos I've recorded.
I'm a bit lost - you first say
"The only file(s) I can sometimes get it to recognize are the ones shot with a camera onto an SD card"
then you say
" If I take an unused SD card and record video with my camera, it will see, and import the file to the Photo app."
In the first statement, aren't you using an SD card in the camera? And what do you mean by "unused SD card"? Cameras put their files in specific folders on a card, and your device only reads photos and video from those folders, not from anywhere else on the card.
Maybe you are looking for
-
Hi experts, I am having the export dump for the whole database but i have to import into another database without any data in the tables... can any one guide me
-
HT201412 i cant get it to charge, its not the plugs, because they charge other iphones
I cannot get my ipod to charge, its not the plug, because i can charge other iphones with it
-
JNDI returns nothing from MS Exchange LDAP server
I used code sample from answer to "Question of the week # 143" to get the attributes of certain LDAP objects from our NT, LDAP server, but it's returning zero results. I can see some of the DIT object names by looking at email properties in Microsoft
-
SBO Service Manager button disabled
Dear Experts, Hi, I try to run SBO Service Manager, it used to have dropdown drill with some options like "SBO Backup","SBO DI Server" and "License Manager". But now I see the dropdown no longer has those 3 options, but only blank and the button is t
-
I just migrated from MacBook 13' OSX 10.6.8 to MacBook Pro 15' Retina OSX 10.8.2 with the use of Migration Assistant. When attempting to install my Magic Trackpad, the Bluetooth Assistant mentions "name not available" so that the device cannot be det