How can I reach a structure-element instead of structure(value of other variable)

Hi gurus,
Sorry If my question is not really clear.
Now I give result to a structure element.(green)
But I'd like to replace this with the red.
TYPES: BEGIN OF structure,
              x1          TYPE i,
              x2          TYPE i,
              x3          TYPE i,
              x4          TYPE i ,
END OF structure.
DATA: s  TYPE structure,
     name TYPE char2.
name = 'X1'.
s-x1 = 0.
s-(name) = 0.
How can I do this? With filed symbol?
Thanks,
Mark

Hi Mark
Please check this syntax 'ASSIGN COMPONENT <comp> OF STRUCTURE <s> TO <FS>.'
regards,
Archer

Similar Messages

  • How can i use the project code instead of project xml?

    hello
    i use the sessionbean+toplink structure,after i finish the o-r mapping by using the mapping work bench,i generate the project xml file,then in the "session.xml" file,i refer to the project xml,then i can use it from sessionbean.
    i hear that if i use the project code instead of project xml file,it will be more performant,is that true?
    otherwise,how can i use the project code instead of project xml file?i mean, in "session.xml", i can use the "<project-xml>" tag to refer to the project xml file,then in my session bean,i get the server session by read the "session.xml" file.but if i use the project code,how can i refer it from the "session.xml"?the examples that come with the toplink installation only tell me how can i use the project xml file within the session bean,it don't give me any clue about using the project code in the sesion bean,who can give me a step-by-step instruction and code snippet?
    thank you very much?

    There is a slight performance gain during session load at startup but there is no difference at runtime. The choice of which to use is dependent upon you build process. Whether it is easier to submit a new version of the class into the comile build process vs an XML file. In most cases it is just a preference of the development team.
    When you use the project-class you'll need to generate the source code and compile it into your system. Typically it is packaged with the persistent classes. You may need to configure your environment so that the class-loaders have access to these classes (same for the XML case).
    When using the project-class you simply replace the project-xml entry like this:
    <project-class>oracle.toplink.demos.employee.relational.EmployeeProject</project-class>
    The DTD for the session.xml file is found at <TOPLINK_HOME>\core\sessions_4_5.dtd. It is also in the documentation at:
    http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/toplink.903/b10064/a-sessio.htm#634246
    Doug Clarke
    Product Manager
    Oracle9iAS TopLink

  • I just upgraded from Express to Pro.  When I open a project in Finder and neither Express nor Pro are running, it always opens in Express.  "Open With ..." says Express is the default.  How can I make Pro the default instead?

    I just upgraded from Logic Express to Pro.  When I open a project in Finder and neither Express nor Pro are running, it always opens in Express. I now want projects to open in Pro.  "Open With ..." says Express is the default.  How can I make Pro the default instead?

    Well, when I've done things like that it always sems like a good idea to keep an application that you know the file will definitely open in...

  • How can I access the selected element of a DropDownByIndex-box?

    Hi,
    I want to create a WebDynpro with two web services. I created the first request with the first web service and the results are displayed in a DropDownByIndex-Box. Now the user should choose one of the results and I would like to use this for the request with my second web service. How can I access the selected Element of a DropDownByIndexBox in the Code?
    Thank you!!
    Julia

    Hi Julia,
    when user select one element in drop down it automatically set lead selection of node binded to dropdown.
    For example if you bind a dropdown to node myNode with value attribute myAttribute the lead selection of node myNode is set in the position of element choose from user.
    So to take this chooised element use this code:
    wdContext.currentMyNodeElement.getmyAttribute()
    bye
    Andrea

  • Pages: how can I see the structure of a document?

    Hi, I'm a new user, I just bought my first mac last week.
    I have a problem with Pages. How can I see the structure (organization) of the document I'm working on? I mean headings, headings 2, etc? In Microsoft Word you see it on the left. I don't mean thumbnails, but the construction of the document.
    I know how to mark headings and other parts of a typical document but how can I see the structure afterwards?
    Thanks in advance.

    What you are asking for is Outlining, and that has been removed from Pages 5.2 along with 110 other features.
    Use Pages '09 if you can.
    Peter

  • How can I move my Premiere elements 8 from my old pc to my new imac?

    How can I move my Premiere elements 8 from my old pc to my new imac?

    tenfootprints
    Does your imac come with a Windows Mac interface?
    If not, you cannot. There is no Premiere Elements 8 Mac version. And, you cannot install Premiere Elements 8 Windows on
    a Mac computer. As I recall, Premiere Elements 9.0/9.0.1 was the first Premiere Elements version to be offered in Windows and Mac versions.
    Please explain with more details.
    Thanks.
    ATR

  • I upgraded my computer to 64bit.  How can I transfer my Premiere Elements 8.0 (32bit) to new computer?

    In October 2014, I purchased Adobe Premier Elements 8.0 (and the APE Templates 8.0) for my work computer (32bit Windows 7).  Now they gave me a new computer which is 64bit (Windows 7).  How can I get my Premier Elements program back on my new computer without having to purchase it all over again?  I only had the program for a couple of months before they upgraded my computer  to a 64bit  I submitted my question through "Adobe Chat" and they said they couldn't help and I would need to check the forums.  Thanks to anyone who can help!   Jay
    [Moved from Premiere PRO forum to Premiere Elements... Mod]

    jaym
    What did you have for installation...
    a. installation files from a purchased download from Adobe
    or
    b. installation disc from boxed packaging of the product?
    If you have an installation disc, then insert the disc into the burner tray and follow the instructions for the installation
    that present sequentially. Remember that Premiere Elements 8 on Windows 7 64 bit is still going to be a 32 bit application.
    It will be running in the 32 bit compatibility mode of the 64 bit computer and the 32 bit limitations would apply. But Premiere Elements
    8 will install on Windows 7, 8, or 8.1 64 bit but not as a 64 bit application.
    Now if you purchased an download, those downloads are typically specific to the operating system to which it was downloaded.
    Whether or not installation files downloaded to a 32 bit computer will work on 64 bit computer is questionable. Best advice is to
    try it. You will get an immediate message from the computer and program if it is a no go.
    Please review and let us know the outcome.
    Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR
    Add On...Premiere Elements Windows is a 64 bit application only when it is version 10, 11, 12, or 13 run specifically on
    Windows 7, 8, or 8.1 64 bit computer.

  • How can i reuse a structure in the query designer in 3.5

    Hi all,
    we are using the version BW 3.5,  now how can i reuse a structure made int he query designer, because i need it in another query, i did the structure and put it a technical name and save, help guys

    HI Richard,
    Create a Structure in Rows/columns and save As it, then in the left Panel of the Query Designer you can see three Folders
    1) Structures
    2) Keyfigures
    3) Dimensions
    then Expand the structures Folder, there you can find your saved structure, Structures are 2 types
    1) With Key figures
    2) Without Key Figures
    If you have the key figures in your saved structure, then you can find it in the subfolder of with Keyfigures, else in the other folder.
    Now you can use this structure by draging in all the queries which are on the same InfoProvider (CUbe. MultiProvider)
    Regards
    ReddY A

  • How can i select the next column instead of next row when press enter key

    I need to know how can i select the next column instead of next row when i press the enter key.By default ,when i press enter key the next row is selected and the column remain unchanged but I wants opposite that is the row should remain unchanged but column index will changed.
    Thanks to all.

    Well, the right arrow key will already move you to the next column, so the easiest way to do this is to modify the InputMap to have the Enter key invoke the same Action as the right arrow key.
    You can search the forum for my "Table Actions" (without the space) example that will show you how to do this.

  • I have an old version of itunes on my computer.  My current iPhone will only support OS 10.6.8, how can I upgrade to that system instead of the latest version?

    I have an old version of itunes on my computer.  My current iPhone will only support OS 10.6.8, how can I upgrade to that system instead of the latest version?

    In teh middle of this page...
    -> http://support.apple.com/kb/DL1576
    Download iTunes 10.7 for Windows here: iTunes 10.7 for Windows

  • How can I save a Photoshop Elements 12 file as HTML?

    How can I save a Photoshop Elements 12 file as HTML?

    Sorry, not possible in PSE itself. You'd need to put your photo into the web creation software you use. If you are using an older version of PSE some versions created web albums/galleries which included an index.html page, but that's as much as PSE does. There's nothing like that in PSE 12 since Adobe wants you to use Revel for photo sharing now.

  • How can i reach at my pc documents from notability in my ipad through icloud

    how can i reach at my pc documents from notability in my ipad through icloud

    Sign in to iCloud.com

  • How can I upgrade from Photoshop Elements 12 to Photoshop Elements 13  AND Photoshop Premiere Elements 13? What would be the price?

    How can I upgrade from Photoshop Elements 12 to Photoshop Elements 13  AND Photoshop Premiere Elements 13? What would be the price?

    Hi Raymond,
    I would advise you to buy the bundle package of Premiere and Photoshop Elements 13 which cost 149 $ but due to online promotions the price right now is 119 $.
    Thank you for posting on Adobe Forums.

  • How can I use my photoshop elements 10 with windows 8 upgrade

    How can I use my photoshop elements 10 with my windows 8 uograde

    All versions of PSE except versions 1, 3, 5 & 6 will work with Windows 8.
    Microsoft Windows 8 compatibility.

  • How can I deactivate Adobe photoshop elements 9 when its un-installed?

    How can I deactivate Adobe photoshop elements 9 when its un-installed? I told my husband I had to get it off the third computer but he trying to help me did not deactivate it before he  un-installed it!!!!
    Now what? I am only using this on 2 computers and I'm told I am using it on a 3rd and I'm not.
    How can I fix this?
    It wont work on the 3rd one anyway because its so old and limited it crashes every time I try. But I need this on my 2 good computers.

    One way could be to reinstall it on the third computer and then deactivate it and uninstall it.
    If that doesn't work out or if you'd rather try this route it should work... contact Adobe Support either by chat or via phone and they should be able to help.  Chat is usually 24/7
    Here are some links to help make contact:
    http://www.adobe.com/support/chat/ivrchat.html
    http://www.adobe.com/support/download-install/supportinfo/

Maybe you are looking for

  • GD causing program to die with threading

    I've been working on a fractal generator for the past few days and decided to add multithreading support tonight-just one problem, this code works perfectly without threads, and not all with threads: Works: thread_options_t *toptions = (thread_option

  • Debugging user exit

    Dear Experts,                  I found that the User Exit code for Transaction data coming from R/3 to BW is not working properly. I have to debug it. How do I debug it? Can somebody refer me to any documentation or tell me the method used to debug u

  • RoboHelp 8 runs slow when using network drive...

    I have several users at my business that have upgraded from RoboHelp X5 to RoboHelp 8. They are reporting that when they work on projects which are housed on a network drive, RohoHelp performs very slowly (which never seemed to happen before with X5)

  • Hashing files

    I want to be able to read the first 500 bytes off of a RAW file (or other files) and get the MD5 hash of them. Can someone provide me perhaps a snippet of code that can do this (or point me in the right direction)? I understand I have to use LrMD5 an

  • HT202825 how to I sign in to iCloud key chain?

    I can not open iCloud key chain because when signing in I'm supposed to get a code sent to my code but it is never sent