How can I read and display a ATR image file?

Hello,
Does anyone have any ideas on how to read a atr image file?
Regards,
Kaspar
Regards,
Kaspar

Hello,
The ATR file is one of three files that are outputed as a result of a test that is performed with UnHoltz Dickie test equipment that is used in a vibration lab. Does this help answer the question is there are any viewers?
Regards,
Kaspar
Regards,
Kaspar

Similar Messages

How can I read and display data with OR without recording at the same time?

Hi all,
This forum has been of much help to me, but I have a rather specific question I can't seem to find an answer to. I am new to LabView, educating myself with tutorials, trial and error, and this forum.
Attached is what I have so far. I would like to read data (three voltages) and write it to an excel file. As written below, it will do nothing until I click the "Record" button, when it then takes data, displays it on the gauges and waveform chart, and writes it to a file. What I would like it to do is display the data at all times, and record when I click the record button (while still displaying data being read). I have tried to do this by moving the DAQ Assistant VI, gauges, and waveform graph outside of the loops, but when I do this, it will read until I press record, and then it simply records whatever value it's stuck on. Sorry for the long post, thanks for any help.
--Nathan
Attachments:
Record and Write to File 2.vi ‏332 KB

Sorry, I don't have any DAQ installed, so I won't comment on the DAQ parts.
First of all, Your VI will do nothing until you (1) first set the record button to ON and (2) press the start button in the tool bar. It almost seems that you are using the "continuous run" button. (Don't! That's not its purpose. Basically, it automatically restarts the program whenever it finishes). A toplevel VI should never stop during normal operation, so place a big while loop around all code and create a wait state that does nothing until you tell it to acquire.
You don't need the inner while loop, simply place your code inside the big while loop (and accumulate your array data in an initialized shift register if really needed. Currently you do at the inner loop boundary for some reason). You have a big problem that the array can grow without bounds unless you clear the accumulated data once in a while or place it in a FIFO buffer of limited size. If you let ot grow forever like you do now, the program might run out of resources at one point in the future.
Since you are appending to your file, maybe yo don't need any shift register, just use the data points of the current iteration. Place your save operations in a case structure and keep appending the new data to your file only if the case is true.
It is also very inefficient to use highlevel file IO here,because each instance opens and closes the file. I recommend to open the file once outside the loop, then use low level IO to append, and close the file once the big loop is done.
LabVIEW Champion . Do more with less code and in less time .

How can I read and write text in rings that are inside an array?

Hello All!!!
How can I read and write text in rings that are inside an array?
Regards and thanks in advance.

Use a Property Node linked to the Ring inside the array.
Of course, all elements in the array will have the same text values.
B-)
Message Edited by LabViewGuruWannabe on 12-13-2007 09:47 AM
Message Edited by LabViewGuruWannabe on 12-13-2007 09:48 AM
Message Edited by LabViewGuruWannabe on 12-13-2007 09:49 AM
Attachments:
Strings-BD.PNG ‏17 KB
Strings-FP1.PNG ‏23 KB

HT1391 How can I read and print digital booklets that are downloaded togheter with the recordings I purchased

How can I read and print digital booklets that are downloaded togheter with the albuns I bought?

cu is right.
classloader returns the URL of your resource. You can the jar using something like the following...
ClassLoader classloader = this.getClassLoader();
url = classloader.getResource("your_resouces...");
if(url == null)
System.out.println("cannot find resource ");
return null;
String jar = url.getFile();
jar = jar.substring(jar.indexOf("/")+1, jar.lastIndexOf("!")).replace('/', '\\');
obviously, this code snippet works on windows only. Now you have the jar file path. I use Jar file classes to access the jar file. (e.g. you can search for each class files)
Ming

HT4847 On startup my macbookair says start up disk full/delete some files. When I look at storage disk utility I see 51GB of a possible 60GB is used with Other. What is Other? and how can I view and delete some of these files?

On startup my macbookair says start up disk full/delete some files. When I look at storage disk utility I see 51GB of a possible 60GB is used with Other. What is Other? and how can I view and delete some of these files?

A MacBook will use Time Machine to make local backups so that when connected to an external drive it will backup a lot faster.
to disable this, you must use a command under terminal.
to locate terminal, do a search for it under spotlight (the magnifying glass on the top right corner), should be the first hit.
once under terminal, type the following text exactly:
sudo tmutil disablelocal
hit enter.
you will be asked to input your password, if you do not have a password, you will have to create one before performing this command. after entering your password, hit enter again and close terminal.
in a few minutes the space taken up by time machine should be cleared.

How can I drag and drop an icon/image into a panel??

Dear Friends:
How can I drag and drop an icon/image from one panel into another target panel at any position in target panel at my will??
any good example code available??
I search for quite a while, cannot find a very good one.
please help
Thanks
Sunny

[url http://java.sun.com/developer/JDCTechTips/2003/tt0318.html#1]DRAGGING TEXT AND IMAGES WITH SWING

How can I get the resolution of an image file in JSP?

how can I get the resolution of an image file like jpg,gif,png in JSP ?

Hii,
If by the resolution, u mean size..this is how u can come to know....
String add = "path/to/some.jpeg";
javax.swing.ImageIcon chain = new javax.swing.ImageIcon(add);
int height = chain.getIconHeight();
int width = chain.getIconWidth();
Hope that helps.
regards

How can I catch and display the "cent" symbol (Alt+0162)?

Hi,
I have a jTextArea field in which it supposes to be able to catch a special
character, money cent symbol by Alt+0162 from the keyboard. Does anyone know
how I can catch it and display it in money cent symbol in the jTextArea field?
Thanks for your help.
-John

The CATCH-ENDCATCH statement is obsolete as of release was620. You should use TRY. CATCH. ENDCATCH.
The exception that will be raise is CX_SY_CONVERSION_NO_NUMBER, so you have to catch that exception or a super class of this exception class.
REPORT zfsl_sum_functions.
DATA: cin(50),
cout(50),
iin TYPE i,
iout TYPE i,
etext TYPE string.
DATA: rf_cx_error TYPE REF TO CX_SY_CONVERSION_NO_NUMBER,
        errortxt TYPE string.
TRY.
    cin = '123ABC'. " how can i catch this
    iout = cin.
    WRITE: iout.
CATCH CX_SY_CONVERSION_NO_NUMBER INTO rf_cx_error.
    errortxt = rf_cx_error->get_text( ).
    WRITE errortxt.
ENDTRY.

How to read and display a fits image into JPanel

Hi,I currently want to read a .fits file and display it in JPanel,have no idea how to achieve it.Any suggestions and source codes are appreciated.Thanks in advance!

fits stands for flexible image transport system,it defined only for astronomy image data.it is not normal image,I am afraid I can not use the way you said to read fits file.Anyway,thanks a lot.

How can i hide and display columns dynamically

Hi,
Is such a thing possible in BeX.?????
Following is the reqiurement.
Number of columns with the forecast values are to be from Forecast 1&2 till the month before the chosen selection. In order for us to calculate the variance, you should have 2 forecast values.
If March is chosen please show Forecast 1& 11, Forecast 2&10
If April is chosen please show Forecast 1& 11, Forecast 2&10, Forecast 3&9.
If November is chosen please show Forecast 1& 11, Forecast 2&10, Forecast 3&9, Forecast 4&8, Forecast 5&7..Forecast 10&2.
Please guide how can this be achieved.
Regards,
Rathy

Hi,
well at least you can use some vba macros to achieve that. Best would be to have a static query embedded in a workbook and a sheet where the results are displayed as copies from the query via a macro.
regards
Siggi

How can i Read and Delete data in Infocube

Can some help me how to read and delete data in infocube before loading data from direct DSO.
I should be able to read and delete condition with combination (0FISCPER, 0COMP_CODE).
Let us say we load JAN, comp _ code : 0001 (10 records )and JAN comp _ code :003 (30 records ) and JAN, comp _ code : 004 (20 records ) to infocube
second time if DSO gets data of JAN, comp _ code : 0001 (40 records ) it doent need to be 10 old + 30 new, it can be 9 old 21 new lay i need to delete 1 old rec which i dont need. so that is the reason i want delet all JAN, comp _ code : 0001 recods before loading.
Can some one help me

Hello,
You could use the selective deletion available with the cube to get the selective data for 0FISCPER, 0COMP_CODE combination deleted.
If you go in the manage of cube & Content tab, you would find the selective deletion option at the bottom of screen.
If you enter the option, you could give your selections for deleting the records and run the job.
Please let me know if you need any more help.
Regards,
Pankaj

How can we read and write data into plist using javascript in a html5 widget to be implemented into iBooks?

I had been trying to read from a plist to get file names of data files and it works fine when i run it in safari but after making its widget and putting it into iBooks it doesnot works. Please tell me any new method to read p list or correct my function if there is any correction. my function is following.
function plistread(n)
          if (window.XMLHttpRequest)
               xhttp = new XMLHttpRequest();
           else
        xhttp = new ActiveXObject("Microsoft.XMLHTTP");
               xhttp.open("GET", "Spell_Check_3.plist", false);
    xhttp.send();
    xmlDoc = xhttp.responseXML;
    var x = xmlDoc.getElementsByTagName("dict");
    var imgnamex = x[n].getElementsByTagName("string")[0].childNodes[0].nodeValue;
    xlength=x.length;
          return imgnamex;

See i need to access a plist file in my html5 widget, i implemented it in java script but it's not working so is there any other way to take out values from a plist file.

How can i Read the Data from such Excel files?

Dear All,
Here I am attaching an excel file in which all the datat cells have more than one data, can anybody tell me, how to read from such kind of excel files?
Thanks in Advance & Happy New Year,
Rujuta

Greetings Ruju,
Here is what I do to read such a file:
I first save the Excel file (xls) as CSV file (which is easier to handle: Comma Seperated Values) .. Open the file using Excel and save it CSV.
Then using the code attached I get all these values in a string array.
Hope this helps
Ayman Mohammad Metwally
Automation Engineer
Egypt - Cairo
Attachments:
CSV2ARRAY.vi ‏29 KB

How can I Save and Load the Configuration File of a VNA HP8510C with LabView

Hello, I'm working with a HP8510C. In order to simplfy the use, I try to save and to load the configuration file. Actually, such files are saved in the HP8510C, but there is only 4 places to save. It will be more interresting when I can storage this file in the computer with Labview. I don't have found anything about in the Documentation.
Has someone already deal with such a question?
Géraud DEVOS
IWE Karlsruhe

geraudIWE a écrit:
Hello, I'm working with a HP8510C. In order to simplfy the use, I try to save and to load the configuration file. Actually, such files are saved in the HP8510C, but there is only 4 places to save. It will be more interresting when I can storage this file in the computer with Labview. I don't have found anything about in the Documentation.
Has someone already deal with such a question?
Géraud DEVOS
IWE Karlsruhe
Hello GerauIWE,
Have you try to use the Hewlett-Packard 8510C Instrument Driver?
You can download it on :
http://sine.ni.com/apps/we/niid_web_display.drv_results?p_app_area=&p_man=hewlettPackard&p_keywords=8510c&p_inst_type=&p_env=845&p_drv_type=&p_int=
Best Regards,
Sanaa T
National Instruments France
Sanaa T.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> http://www.nidays.fr/images/081110_ban_nidays09_468X60.gif

How can NI FBUS Monitor display very large recorded files

NI FBUS Monitor version 3.0.1 outputs an error message "Out of memory", if I try to load a large recorded file of size 272 MB. Is there any combination of operating system (possible Vista32 or Vista64) and/or physical memory size, where NI FBUS Monitor can display such large recordings ? Are there any patches or workarounds or tools to display very large recorded files?

Hi,
NI-FBUS Monitor does not set the limitation on the maximum record file size. The physical memory size in the system is one of the most important factors that affect the loading of large record file. Monitor will try loading the entire file into the memory during file open operation.
272MB is a really large file size. To open the file, your system must have sufficient physical memory available. Otherwise "Out of memory" error will occur.
I would recommend you do not use Monitor to open a file larger than 100MB. Loading of a too large file will consume the system memory quickly and decrease the performance.
Message Edited by Vince Shen on 11-30-2009 09:38 PM
Feilian (Vince) Shen

How can I read and display a ATR image file?

Similar Messages

Maybe you are looking for