Actions not displaying in Overview for ONE user ID

Hi Frnz...
For only ONE user ID Actions not displaying in Overview tab.
For this User ID Overview details are visible for some Employee IDs and for some its not visible.
Already checked Roles & Authorisations and IT 0302 & 0000 are active. Have also run RPUEVSUP.
Just to add.. this query is happening while a technical upgrade has happened from 4.6 to 6.0.
Pls help me ..
Rgds.. Raj

Hi,
I hope you have done this but FYR
Before clicking on the overview button maintain the dates as 01.01.1900 and 31.12.9999
Thanks
ABHI

Similar Messages

Jerky scrolling and Safari not displaying most jpegs in one user a/c

Hi
I upgraded my 15" mid 2010 MBP to Mountain Lion and find that it is behaving oddly. I have two different user accounts and the oddities vary between accounts. In one, most jpegs in Safari are not displayed, substituted with black rectangles with patterns of coloured dots (in the other, there is no problem with rendering pictures). The scrolling of pages is extremely jerky in Safari and far from perfect elsewhere (slightly jerky in Preview eg). Even the dock magnification is jerky, with icons breaking up as you pass over them.
In both accounts the scroll bar in Safari flickers on and off irrespective of whether the setting in General prefs is for the scroll bar to display permanently or not. The less troubled user account is noticeably snappier in action (eg opens the About this Mac screen with no delay compared with a second or so in the other account).
I've tried ditching the caches for Sarari with no effect. I rebuilt permissions after the install. I'm at a loss to know what to do next as it feels like a generic video problem but, bizarrely is more or less confined to one account.
Any clues?
Best
J

bizarrely is more or less confined to one account.
Check Safari > Preferrences > Extensions
If there are any installed, turn that OFF, quit then relaunch Safari to test.
If it's not an extension issue, try troubleshooting third party plugins.
Help here > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues

Problem with "Group By" in Views - Not Displaying the Same for All Users

We have an Announcements List with its only View being set up to group by a metadata category field. We've done this many times on other kinds of lists and never had a problem. But with this list, about half the users can see only the ungrouped
set of announcements, whereas others actually see the items within their groups.
Those with "View" rights only can't see the grouped items - but that appears to be a coincidence as I promoted them to the same rights as others who can see them correctly, and that did NOT solve the problem. Everyone is using the exact same browser.
Note: the users who do NOT see the groupings see only a single category entry that displays only the name of the category list (but not the names of the actual categories within the category list). All the announcements are grouped under that one
entry for those users. This display looks exactly like it would if the categories had been left blank when the original announcements were created. But the categories are NOT blank, and the rest of the users can see them just fine, and the announcements display
within their appropriate groups.
I can't find anything in the View, the List Settings, or the User Permissions to explain this. What could be causing it, and how can I fix it?

Browser settings are controlled by central IT and are all identical.
The only difference I can detect is the second set of users (that don't see the category options) have only Read rights, whereas those with Contribute (or above) rights can see the categories. It doesn't make
sense that permissions would affect this, but I can't come up with any other differences.
Microsoft will not allow me to upload images. it says I can't upload images until they have verified my account, but there is no clue as to how, if or when that might happen. If you can tell me how to fix that, I can provide samples.

$DISPLAY stopped working for one user

Have 3 secondary users that I use daily on this desktop, that runs Arch x86_64 up-to-date (systemd compatible). WM is i3-wm 4.3-2.
As of today, USER2 can launch GUI applications, USER3 sudently can't.
Can't see what configuration I could have edited (I barely touch those secondary users config files).
First tho secondary users are allowed to use X with 'xhost +SI:localuser:<USER{2,3}>' in a startup script, so that I can launch various GUI apps.
Both share the same groups (audio,video,...) beside their own peculiar group.
Oh and a last one that is used for skype only (as per the wiki). It is launched with an alias:
alias skype='xhost +local: && sudo -u skype /usr/bin/skype'
Runs fine.
Logged as USER3:
$ echo $DISPLAY
$ leafpad
leafpad: Impossible d'ouvrir l'affichage:
translation: "Can't open display: "
Logged as primary User I typed successively:
$ xhost +SI:localuser:<USER>
$ xhost +localhost
$ xhost +local:
$ xhost + (access control disabled)
None worked.
As root:
# export XAUTHORITY=~<USER>/.Xauthority
Same thing than before :-o
Note : I happened to shift from Nvidia to nouveau while I had this issue; same issue
Only way I found atm is:
$ sudo -u <USER> -H PROGRAM
Which runs fine.
Please have you got a clue where this might come from?
Refs:
[Solved] Cannot open display :0.0 https://bbs.archlinux.org/viewtopic.php?id=132532 with the 2 links that eirika provided.
Running web browser as separate user? https://bbs.archlinux.org/viewtopic.php … 8#p1058358
Last edited by kozaki (2012-09-25 11:01:11)

Follow-up
Same issue happened after last update on my netbook, for both secondary users.
/var/log/pacman.log
[2012-09-26 13:31] Running 'pacman -S -u'
[2012-09-26 13:31] starting full system upgrade
[2012-09-26 13:32] removed eject (2.1.5-7)
[2012-09-26 13:32] upgraded coreutils (8.17-3 -> 8.19-1)
[2012-09-26 13:32] upgraded gtk-update-icon-cache (2.24.12-1 -> 2.24.13-1)
[2012-09-26 13:32] upgraded gtk2 (2.24.12-1 -> 2.24.13-1)
[2012-09-26 13:32] upgraded hwids (20120906-1 -> 20120922-1)
[2012-09-26 13:32] upgraded ladspa (1.13-3 -> 1.13-4)
[2012-09-26 13:32] upgraded libarchive (3.0.4-1 -> 3.0.4-2)
[2012-09-26 13:32] upgraded libsigc++ (2.2.10-2 -> 2.2.11-1)
[2012-09-26 13:32] upgraded mlocate (0.25-2 -> 0.26-1)
[2012-09-26 13:32] upgraded procps-ng (3.3.3-3 -> 3.3.3-6)
[2012-09-26 13:33] upgraded qt (4.8.3-2 -> 4.8.3-3)
[2012-09-26 13:33] upgraded util-linux (2.21.2-5 -> 2.22-6)
[2012-09-26 13:33] upgraded sysvinit-tools (2.88-7 -> 2.88-8)
As far I can remember I haven't edited any config file on that system for last month - other than power management related: cpupower, jupiter and kernel-netbook
Problem hasn't changed on the desktop PC: $DISPLAY works fine with one secondary user, and not at all with the other. Have no clue as where it may comes from, so any advice would be much appreciated.

Web template not displaying report properly for few users

Hi,
We have a report based on a web template.The box is supposed to display values for certain fields.
For some users, this box is not displaying any values, its coming as blank and its shrinked in appearance.
This happens only for a few users.There are others who are able to see the report correctly with the values appearing
Any idea from where should we start trouble shooting and what should we look at?
Thanks,
Anjana

Hi,
You can specify the properties for your Web application in each Web template. The settings you have made can then be saved in a library and applied to any other Web template as needed. Choose the Web template for which you want to make the settings from the dropdown box in the header of the Properties window of the Web Application Desginer.
Go through the link and set according to the below link you can acheive this
http://help.sap.com/saphelp_nw04/helpdata/EN/1f/37813b650cdc0be10000000a114084/content.htm
Regards,
Marasa.

Error displaying pdf (only for one user)

Hello,
A user is facing a problem when running a program that displays a pdf. He gets the error :
"Adobe could not open "xxx.pdf" because it*s either not a supported file type or because the file has been damaged..."
All other users can see correctly the pdf.
Any ideas why could this happen?
Thanks

Hi Lalmar,
You might be trying to download a pdf file and lock it with password using webservice. If there is a connection problem, the pdf would be corrupted.
But as you are saying its specific to a particular user ask him to check re-installing Adobe.
Regards,
P Gomatheeswaran

Clicking the App Store item in the Finder menu does not open the application for one user account.

Although clicking the App Store icon in my Dock works, clicking the App Store . . . selection in the Finder menu doesn't do anything. I created a second user account and the Finder Menu worked as expected.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

Find not working in GW 7 for one user

The Find option does not show any results for one user. It works on Archived items. The user does have 14,000 sent items alone. Any step to take to fix this issue without having to recreate their account. Ran an analyse/fix and structural rebuild that didn't work.

You could try going into the Display Properties of any folder, select the
Find Results entry from the list and press Delete. Sometimes that entry
can get corrupted and needs to be recreated, which will happen next time
you run a Find.
Cheers Dave
Dave Parkes [NSCS]
Occasionally resident at http://support-forums.novell.com/

Account search functinality is not working for one user in portal

Hi friends,
We have configured E.P 7.0 with CRM 5.0 and configured CRM PCUI business package.
We have a role called <b>accounts and products</b> in portal. So accounts can be searched in this role.
Now our severity issue is for one of the super user,for ex su1, accounts search is not working in portal but the same is working in CRM GUI.
for example if we search for an account 233445(or any other account) in portal its showing no data found but if we search with the same criteria data is displaying CRM GUI.
We have checked with other 2 super ids. Both ends portal and gui search is working fine.
Am unable to figure out whats the cause of the issue as search is not working only for one user su1 .
we have checked by restarting the server also to clear the memory cache.But still search is not working in portal.
Could anyone of u please advice ASAP as this is severity issue.
Thanks & Regards
Sireesha.

Hi srinivas,
I have checked both the users credentials,permissions,groups in the GUI and also in the portal.
Both of the users profiles are assigned as same.
Could you please advice is there any other way to check it out?
Regards
Sireesha.

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

Adjusting the display area's size for one user

For one user account, the display is larger than the area of the monitor such that when we move the mouse the whole picture scrolls since it does not fit on to the display's area.
I would have thought this had to do with the hardware adjustments with which you can adjust the hor/vert positioning, etc., but I have not been able to address this problem with these controls - In any case, those hardware controls effect all users and this is only an issue for one (of four) users.
It seems it has to do with the resolution since the fonts are slightly distorted.
The display system preferences are set correctly - and no matter what resolution is set, the problem is consistent for that user.
Any suggestions?!

System Preferences->Universal Access and check that Zoom is off.

"view content preview in thumbnails" option is not available in view settings for "finder" for one user

"view content preview in thumbnails" option is not available in view settings for "finder" for one user

I hope this discussion can be revived. I have the same problem. There seem to be quite a few Japanese sites that don't bother specifying their encoding. Perhaps they are older and from a time when it was not necessary to adhere to standards. Examples: http://www1.plala.or.jp/CUE/cave_yozawa.html, http://chigaku.web.fc2.com/saitama/sanchi/youzawa/youzawa.html. Happy to upload screenshots, but how?
Is there a way to tell Safari what encoding to use if the web page fails to do that?

After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.

After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.

We've had several instances where we have had to run chkdsk on arrays with over 1m files. Average completion time is approximately 72 hours. The maximum downtime window they have available is the 64 hour weekend window. File sizes and number of files were
much smaller then than they are now.
The idea, in theory, was to use VHDs to compartmentalize the data into smaller volumes which could be more easily managed. It would also improve performance when transferring these compartments of data as they would use sequential read/write rather than
fragmented/random. This idea was never fleshed out in entirety, they don't split data up into little containers, but simply into big ones per project. Hence the 11m files in one container that I am currently trying to diagnose.
Some other important facts: The VHD in question is mounted in B:/project/ as this server also allows remote workers to log in, but they are restricted to see only data in E:. Disks A-D are hidden via group policy.
Update: icacls is failing on a large number of files within this dataset. I counted the path characters to ensure it wasn't the 255 character limit I was encountering and verified that the paths being blocked are only about 150 characters long. Once it finishes,
I'll have to try taking ownership and then re-running it. At this point I still have no idea how long to expect. I'm running out of time as the environment will be in use again at 9AM tomorrow morning.

Firefox crashes on start up for one user but not another

Crash ID: bp-df3a48d7-363c-4d2f-87d3-f73902140723
Version: 31
Crashes on start up for one user but not another. Both are administrators.
I have uninstalled and re-installed. No change with each user.
Crashes in safe mode as well (holding down shift)
No addons present in other user.
Have ran Malwarebytes and cleaned
Have ran CCCleaner and cleane all including registry entries with Firefox uninstalled.

Create a new profile as a test to check if your current profile is causing the problems. <br>
See '''Creating a profile''':
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem <br>
'''Profile Backup and Restore'''
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Airplay works for one user but not for another on the same machine

I have the problem where airplay works for one user but not for another and both users are on the same machine. For the user where it does not work, everything appears normal, it's just that there is no sound being transmitted. I have tried restarting the Airport express, restarting iTunes, repairing disk permissions. Any ideas about what can be done to resolve this?

my /etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,hans,ibm,gast
ftp::11:
mail::12:
uucp:x:14:
log::19:root
locate:x:21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:ibm,gast
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:gast
dbus:x:81:
hans:x:1001:
vboxusers:x:108:hans
policykit:x:1002:
hal:x:82:
kvm:x:78:
nx:x:85:nx
avahi:x:84:
camera:x:97:
gdm:x:1003:
gast:x:1004:

Actions not displaying in Overview for ONE user ID

Similar Messages

Maybe you are looking for